Re: [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alessandro Bono wrote:

> Tejun Heo wrote:
> 
>> Please test this patchset.  If you don't feel comfortable with handling
>> patch series, this patchset is also available as...
> 
> Hi Tejun
> 
> I can confirm that 2.6.18-git3 + this patchset boot perfectly without any
                        ^^^^^^^^
                    2.6.18-git13
> delay
> 
> libata version 2.00 loaded.
> ata_piix 0000:00:1f.1: version 2.00ac6
> PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
> PCI: setting IRQ 7 as level-triggered
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 7 (level, low)
> -> IRQ 7
> PCI: Setting latency timer of device 0000:00:1f.1 to 64
> ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
> scsi0 : ata_piix
> ata1.00: ATA-6, max UDMA/100, 195371568 sectors: LBA
> ata1.00: ata1: dev 0 multi count 16
> ata1.00: configured for UDMA/100
> scsi1 : ata_piix
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: AT Translated Set 2 keyboard as /class/input/input1
> ata2.00: ATAPI, max UDMA/33
> ata2.00: configured for UDMA/33
> scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2100A 0000 PQ: 0 ANSI:
> 5
> scsi 1:0:0:0: CD-ROM            MATSHITA UJ-820D          1.01 PQ: 0 ANSI:
> 5 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
>  sda: sda1 sda2
> sd 0:0:0:0: Attached scsi disk sda
> .....
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> .....
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> 
> 
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux