-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, trying libata with 2.6.19-rc1 produced the follwing at startup: ata6.00: ATAPI, max UDMA/3 ata6.01: qc timeout (cmd 0xa1) ata6.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata6: failed to recover some devices, retrying in 5 secs ata6.01: qc timeout (cmd 0xa1) ata6.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata6: failed to recover some devices, retrying in 5 secs ata6.01: qc timeout (cmd 0xa1) ata6.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata6: failed to recover some devices, retrying in 5 secs I have nvidia chipset and therefore use pata_amd and sata_nv. The DVD/RW drive is the only drive on ata6. The harddisk on ata5 is recognized without problems. After the above 3 attempts to scan ata6.01 the boot process continued normally and all drives are working fine (HD and DVD). It seem that libata thinks there is a drive on ata6.01 but there is none (->Ghosting?). I figured there were such issues earlier with other chipset. Is there something to do about it? Regards Michael -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFJR4GC0GEtIi2MlcRApl/AJwKVMEQqpwKzmx+Of0X9PYaTSRnsgCeLTQJ QljNzcevm7+NkbO/y8cJkpU= =/S1W -----END PGP SIGNATURE----- - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
