Linux IDE Archive

• Thread Index

• Re: [PATCH] ata: Add support for the MPC52xx ATA controller using libata
  • From: Jeff Garzik
• Re: [PATCH] pata_it8213: Add new driver for the IT8213 card.
  • From: Jeff Garzik
• Re: [PATCH 2.6.19-rc6][reRESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Jeff Garzik
• Re: CDROM drive not found when booting using new libata code
  • From: Alan
• Re: Oops in pata_pdc2027x
  • From: Stephen Rothwell
• Re: CDROM drive not found when booting using new libata code
  • From: Tejun Heo
• Re: Oops in pata_pdc2027x
  • From: Albert Lee
• [PATCH 1/1] libata: let ATA_FLAG_PIO_POLLING use polling pio for ATA_PROT_NODATA
  • From: Albert Lee
• Re: Scary Intel SATA problem: "frozen"
  • From: Tejun Heo
• [PATCH 2.6.19-git7] sata_promise: new EH conversion, take 2
  • From: Mikael Pettersson
• Re: -mm merge plans for 2.6.20
  • From: Andrew Morton
• Re: -mm merge plans for 2.6.20
  • From: Jeff Garzik
• Re: -mm merge plans for 2.6.20
  • From: Randy Dunlap
• Re: -mm merge plans for 2.6.20
  • From: Conke Hu
• Re: Scary Intel SATA problem: "frozen"
  • From: Andrew Lyon
• Re: CDROM drive not found when booting using new libata code
  • From: Art Haas
• Re: Scary Intel SATA problem: "frozen"
  • From: Jonas Lundgren
• Re: low performance trying pata_sis
  • From: Alan
• low performance trying pata_sis
  • From: Uwe Koziolek
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Tejun Heo
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Tejun Heo
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Tejun Heo
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Jeff Garzik
• [PATCH 2.6.19] sata_promise: cleanups, take 2
  • From: Mikael Pettersson
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Mikael Pettersson
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Mikael Pettersson
• Re: [PATCH 2.6.19 3/3] sata_promise: cleanups
  • From: Mikael Pettersson
• Re: Oops in pata_pdc2027x
  • From: Stephen Rothwell
• Re: Oops in pata_pdc2027x
  • From: Albert Lee
• [PATCH] ata/kconfig: Re: Why SCSI module needed for PCI-IDE ATA only disks ?
  • From: Randy Dunlap
• Re: [PATCH] ide-cd: Handle strange interrupt on the Intel ESB2
  • From: Bartlomiej Zolnierkiewicz
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Sergei Shtylyov
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Benjamin Herrenschmidt
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Sergei Shtylyov
• [PATCH] (2.6.19-rc6-mm2) sl82c105: straighten up IDE control/status register caching
  • From: Sergei Shtylyov
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Grant Grundler
• Re: -mm merge plans for 2.6.20
  • From: Mark Lord
• Linux 2.6.19: Libata PATA report (minor detection problem)
  • From: Dâniel Fraga
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Sergei Shtylyov
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Gabriel Paubert
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Olaf Hering
• Re: -mm merge plans for 2.6.20
  • From: Jens Axboe
• Oops in pata_pdc2027x
  • From: Stephen Rothwell
• Re: -mm merge plans for 2.6.20
  • From: Andrew Morton
• Re: -mm merge plans for 2.6.20
  • From: Jeff Garzik
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Benjamin Herrenschmidt
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Benjamin Herrenschmidt
• Re: libata-dev.git rebased
  • From: Dan Williams
• Re: sata_sis and SIS180 in combined mode
  • From: Alan
• Re: sata_sis and SIS180 in combined mode
  • From: Uwe Koziolek
• [PATCH v2] libata: Simulate REPORT LUNS for ATAPI devices
  • From: Darrick J. Wong
• Re: libata: Simulate REPORT LUNS for ATAPI devices when not supported
  • From: Jeff Garzik
• Re: [PATCH] pata_it8213: Add new driver for the IT8213 card.
  • From: Jeff Garzik
• [PATCH] ata: Add support for the MPC52xx ATA controller using libata
  • From: Sylvain Munaut
• Re: [PATCH] pata_it8213: Add new driver for the IT8213 card.
  • From: Alan
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Guennadi Liakhovetski
• Re: [PATCH] ata: Add support for the MPC52xx ATA controller using libata
  • From: Jeff Garzik
• Re: [PATCH] pata_it8213: Add new driver for the IT8213 card.
  • From: Andrew Morton
• ICH7m problem using libata
  • From: Jan Gutter
• [PATCH] pata_it8213: Add new driver for the IT8213 card.
  • From: Alan
• Re: [PATCH]: via 6421 PATA support done in a rather cleaner fashion
  • From: Tomasz Chmielewski
• [PATCH] ide-cd: Handle strange interrupt on the Intel ESB2
  • From: Alan
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Sergei Shtylyov
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Sergei Shtylyov
• [PATCH]: via 6421 PATA support done in a rather cleaner fashion
  • From: Alan
• Re: [PATCH] sata_via: add VT6421 PATA support
  • From: Alan
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Alan
• Re: Disabling SATA hardware interrupts
  • From: Alan
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Sergei Shtylyov
• [PATCH] sata_via: add VT6421 PATA support
  • From: Tomasz Chmielewski
• What is the correct way to indicate an unassigned PCI resource ?
  • From: Alan
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Alan
• RE: [PATCH 1/2] sata_nv & ahci: Move some IDs from sata_nv.c to ahci.c
  • From: Peer Chen
• Re: Disabling SATA hardware interrupts
  • From: Thinus Viljoen
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Sergei Shtylyov
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Segher Boessenkool
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Alan
• Re: [PATCH] add delay around sl82c105_reset_engine calls
  • From: Olaf Hering
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Sergei Shtylyov
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Segher Boessenkool
• Re: [PATCH] add delay around sl82c105_reset_engine calls
  • From: Alan
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Olaf Hering
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Segher Boessenkool
• Re: sata_sis and SIS180 in combined mode
  • From: Alan
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Sergei Shtylyov
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Sergei Shtylyov
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Segher Boessenkool
• [PATCH] add delay around sl82c105_reset_engine calls
  • From: Olaf Hering
• [PATCH] mark PCI resource with start 0 as unassigned
  • From: Olaf Hering
• sata_via or libata regression in 2.6.19? Synchronizing SCSI cache for disk sdX FAILED
  • From: Tomasz Chmielewski
• Re: [PATCH 2.6.19-rc6-mm2] sata_sis: support SiS966/966L
  • From: Alan
• Re: [PATCH] ata: Add support for the MPC52xx ATA controller using libata
  • From: Alan
• Re: Disabling SATA hardware interrupts
  • From: Alan
• Disabling SATA hardware interrupts
  • From: Thinus Viljoen
• ata_piix (2.4.x) on ICH7R
  • From: Axel Reinhold
• Re: pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• [PATCH] ata: Add support for the MPC52xx ATA controller using libata
  • From: Sylvain Munaut
• Re: sata_sis and SIS180 in combined mode
  • From: Uwe Koziolek
• [PATCH 2.6.19-rc6-mm2] sata_sis: support SiS966/966L
  • From: Uwe Koziolek
• Re: pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• Re: sata_sis and SIS180 in combined mode
  • From: Alan
• Re: pata_sl82c105 can not reserve IO region
  • From: Alan
• Re: sata_sis and SIS180 in combined mode
  • From: Uwe Koziolek
• Re: pata_sl82c105 can not reserve IO region
  • From: Alan
• Re: sata_sis and SIS180 in combined mode
  • From: Sven Ladegast
• Re: pata_sl82c105 can not reserve IO region
  • From: Alan
• Re: sata_sis and SIS180 in combined mode
  • From: Alan
• Re: pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• Re: AHCI support on Intel chipsets (confusion?)
  • From: Leon Woestenberg
• Re: AHCI support on Intel chipsets (confusion?)
  • From: Wayne Sherman
• sata_sis and SIS180 in combined mode
  • From: Sven Ladegast
• Re: pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Arjan van de Ven
• Re: AHCI support on Intel chipsets (confusion?)
  • From: Tejun Heo
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Tejun Heo
• Re: [PATCH 2.6.19 3/3] sata_promise: cleanups
  • From: Jeff Garzik
• Re: [PATCH 2.6.19 3/3] sata_promise: cleanups
  • From: Tejun Heo
• Re: [PATCH 2.6.19 1/3] sata_promise: PHYMODE4 fixup
  • From: Jeff Garzik
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Jeff Garzik
• Re: [PATCH] libata: always use polling IDENTIFY
  • From: Jeff Garzik
• Re: [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Tejun Heo
• Re: [PATCH RESEND] libata: always use polling IDENTIFY
  • From: Jeff Garzik
• Re: [PATCH] libata: always use polling IDENTIFY
  • From: Alan
• [PATCH RESEND] libata: always use polling IDENTIFY
  • From: Tejun Heo
• Re: [PATCH] libata: always use polling IDENTIFY
  • From: Jeff Garzik
• [PATCH] libata: always use polling IDENTIFY
  • From: Tejun Heo
• Re: libata-dev.git rebased
  • From: Tejun Heo
• Support for Promise SATA300 TX2plus ?
  • From: Wolfgang Denk
• Re: [PATCH] (2.6.19-rc6-mm2) pdc202xx_new cleanup
  • From: Sergei Shtylyov
• Re: AHCI support on Intel chipsets (confusion?)
  • From: Wayne Sherman
• Re: AHCI support on Intel chipsets (confusion?)
  • From: Wayne Sherman
• Re: AHCI support on Intel chipsets (confusion?)
  • From: Leon Woestenberg
• AHCI support on Intel chipsets (confusion?)
  • From: Wayne Sherman
• libata-dev.git rebased
  • From: Jeff Garzik
• Re: pata_sl82c105 can not reserve IO region
  • From: Benjamin Herrenschmidt
• Re: pata_sl82c105 can not reserve IO region
  • From: Alan
• Re: pata_sl82c105 can not reserve IO region
  • From: Benjamin Herrenschmidt
• Re: Scary Intel SATA errors..
  • From: Alan
• Re: pata_sl82c105 can not reserve IO region
  • From: Sergei Shtylyov
• Re: pata_sl82c105 can not reserve IO region
  • From: Alan
• Re: pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• Re: [COORDINATE] INIC-1620TA/1622TA2/1623TA2 SATA controllers from initio
  • From: Matthias Urlichs
• libata Intel PIIX/ICH fails to detect both PATA drives, spews ACPI errors
  • From: Berck E. Nash
• Re: [COORDINATE] INIC-1620TA/1622TA2/1623TA2 SATA controllers from initio
  • From: Tejun Heo
• Promise_FastTrack_PDC20378_PATA
  • From: Oliver Bardenheier (obardenh)
• Re: 2.6.18 - AHCI detection pauses excessively
  • From: Tejun Heo
• Re: [COORDINATE] INIC-1620TA/1622TA2/1623TA2 SATA controllers from initio
  • From: Alan
• Re: 2.6.18 - AHCI detection pauses excessively
  • From: Berck E. Nash
• Re: [PATCH] (2.6.19-rc6-mm2) pdc202xx_new cleanup
  • From: Sergei Shtylyov
• Re: [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Adrian Bunk
• Re: [PATCH] (2.6.19-rc6-mm2) pdc202xx_new cleanup
  • From: Sergei Shtylyov
• Re: [COORDINATE] INIC-1620TA/1622TA2/1623TA2 SATA controllers from initio
  • From: Alan
• [PATCH 2.6.19 3/3] sata_promise: cleanups
  • From: Mikael Pettersson
• [PATCH 2.6.19 2/3] sata_promise: new EH conversion
  • From: Mikael Pettersson
• [PATCH 2.6.19 1/3] sata_promise: PHYMODE4 fixup
  • From: Mikael Pettersson
• Re: 2.6.18 - AHCI detection pauses excessively
  • From: Tejun Heo
• libata - Toshiba Portege 300CT experience
  • From: Pavel Roskin
• Re: PMP in sata_sil24
  • From: Tejun Heo
• Re: [COORDINATE] INIC-1620TA/1622TA2/1623TA2 SATA controllers from initio
  • From: Tejun Heo
• Re: Linux AHCI still broken with ICH8
  • From: Tejun Heo
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Robert Hancock
• Re: [PATCH] (2.6.19-rc6-mm2) pdc202xx_new cleanup
  • From: Alan
• Re: [PATCH] libata: blacklist for early irq problem
  • From: Mark Lord
• Re: [PATCH] libata: blacklist for early irq problem
  • From: Mark Lord
• Re: [PATCH] winbond IDE depends on IDEDMA
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] winbond IDE depends on IDEDMA
  • From: Olaf Hering
• [PATCH] (2.6.19-rc6-mm2) pdc202xx_new cleanup
  • From: Sergei Shtylyov
• Re: pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• Re: [COORDINATE] INIC-1620TA/1622TA2/1623TA2 SATA controllers from initio
  • From: Matthias Urlichs
• Re: [PATCH] winbond IDE depends on IDEDMA
  • From: Sergei Shtylyov
• Fwd: [PATCH] (2.6.19-rc6-mm2) pdc202xx_new: fix PIO mode setup
  • From: Sergei Shtylyov
• Re: [PATCH] winbond IDE depends on IDEDMA
  • From: Bartlomiej Zolnierkiewicz
• Re: pata_sl82c105 can not reserve IO region
  • From: Alan
• pata_sl82c105 can not reserve IO region
  • From: Olaf Hering
• Re: [RFC PATCH] nForce4 ADMA with NCQ: It's aliiiive..
  • From: Prakash Punnoor
• [PATCH] winbond IDE depends on IDEDMA
  • From: Olaf Hering
• Re: Intel DQ965GF booted
  • From: Robin H. Johnson
• Re: [PATCH] libata: blacklist for early irq problem
  • From: Alan
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 1/2] sata_nv & ahci: Move some IDs from sata_nv.c to ahci.c
  • From: Jeff Garzik
• [PATCH] libata: blacklist for early irq problem
  • From: Albert Lee
• [PATCH 2/2] sata_nv & ahci: Move some IDs from sata_nv.c to ahci.c
  • From: Peer Chen
• [PATCH 1/2] sata_nv & ahci: Move some IDs from sata_nv.c to ahci.c
  • From: Peer Chen
• [PATCH -mm] sata_nv: add suspend/resume support
  • From: Robert Hancock
• sata_sil
  • From: Harold Lee
• Re: [PATCH] ide_scsi: allow it to be used for non CD only
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide_scsi: allow it to be used for non CD only
  • From: Alan
• Re: [PATCH] ide_scsi: allow it to be used for non CD only
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.18 - AHCI detection pauses excessively
  • From: Mark Lord
• Re: 2.6.18 - AHCI detection pauses excessively
  • From: Berck E. Nash
• Re: Scary Intel SATA errors..
  • From: Alan
• Re: Scary Intel SATA errors..
  • From: Mark Lord
• Re: Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• Intel DQ965GF booted
  • From: Sami Farin
• Re: pata_via in 2.6.19-rc6: UDMA/66 hdd downgraded to UDMA/33
  • From: Alan
• [PATCH] ide_scsi: allow it to be used for non CD only
  • From: Alan
• Re: Scary Intel SATA problem: "frozen"
  • From: Mark Lord
• Re: 2.6.18 - AHCI detection pauses excessively
  • From: Tejun Heo
• Re: Scary Intel SATA problem: "frozen"
  • From: Tejun Heo
• Re: Scary Intel SATA problem: "frozen"
  • From: Jonas Lundgren
• [PATCH] pata_cs5535: add missing comma in pci_driver initializer
  • From: Tejun Heo
• Re: [PATCH] ahci: do not powerdown during initialization
  • From: Tejun Heo
• Re: Scary Intel SATA problem: "frozen"
  • From: Mark Lord
• Re: [PATCH 2.6.15.4 rel.2 1/1] libata: add hotswap to sata_svw
  • From: Martin Devera
• Re: Scary Intel SATA problem: "frozen"
  • From: Tejun Heo
• Re: Scary Intel SATA problem: "frozen"
  • From: Tejun Heo
• Re: Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• Fw: [Bugme-new] [Bug 7589] New: libata: does not work anymore on VIA VT8251 AHCI/SATA 4-Port Controller
  • From: Andrew Morton
• Re: Scary Intel SATA problem: "frozen"
  • From: Jeff Garzik
• Re: [PATCH 2.6.15.4 rel.2 1/1] libata: add hotswap to sata_svw
  • From: Benjamin Herrenschmidt
• Re: Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• Re: Scary Intel SATA problem: "frozen"
  • From: Jeff Garzik
• Re: [PATCH 2.6.15.4 rel.2 1/1] libata: add hotswap to sata_svw
  • From: David Woodhouse
• Re: Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• Re: Scary Intel SATA problem: "frozen"
  • From: Jonas Lundgren
• Re: Scary Intel SATA problem: "frozen"
  • From: Jeff Garzik
• Re: Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• Re: Scary Intel SATA problem: "frozen"
  • From: Jeff Garzik
• Re: Scary Intel SATA problem: "frozen"
  • From: Sergei Shtylyov
• Re: Scary Intel SATA problem: "frozen"
  • From: Eric D. Mudama
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Jeff Garzik
• Re: Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• [PATCH 2.6.19-rc6][reRESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Jason Gaston
• RE: [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Gaston, Jason D
• Re: Scary Intel SATA problem: "frozen"
  • From: Alan
• Re: Scary Intel SATA problem: "frozen"
  • From: Sergei Shtylyov
• Re: Scary Intel SATA problem: "frozen"
  • From: Mark Lord
• Scary Intel SATA problem: "frozen"
  • From: Linus Torvalds
• Re: [PATCH] libata: fix SCSI/ATA device association during hotplug
  • From: Tejun Heo
• Scary Intel SATA errors..
  • From: Linus Torvalds
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Mark Lord
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Albert Lee
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Mark Lord
• Re: [PATCH] libata: fix SCSI/ATA device association during hotplug
  • From: Mark Lord
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Alan
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Mark Lord
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Albert Lee
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Alan
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Tejun Heo
• Re: [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Alan
• Re: [PATCH 2/4] libata: separate out rw ATA taskfile building into ata_build_tf()
  • From: Jeff Garzik
• Re: [PATCH] ahci: do not powerdown during initialization
  • From: Jeff Garzik
• Re: [PATCH] libata: fix READ CAPACITY simulation
  • From: Jeff Garzik
• Re: [PATCH] libata: fix SCSI/ATA device association during hotplug
  • From: Jeff Garzik
• Re: [PATCH] libata: don't request sense if the port is frozen
  • From: Jeff Garzik
• Re: [PATCH] libata: make sure sdev doesn't go away while rescanning
  • From: Jeff Garzik
• Re: [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs
  • From: Jeff Garzik
• Re: [PATCH 2/2 UPDATED] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  • From: Jeff Garzik
• Re: [PATCH 3/4] libata: prepare ata_sg_clean() for invocation from EH
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata: implement ata_exec_internal_sg()
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: move BMDMA host status recording from EH to interrupt handler
  • From: Jeff Garzik
• Re: [PATCH] libata: remove unused HSM_ST_UNKNOWN
  • From: Jeff Garzik
• Re: [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2
  • From: Jeff Garzik
• Re: [PATCH] libata: print cdb[0] in failed qc report
  • From: Jeff Garzik
• Re: [PATCH] libata: fix scsi_host_template in drivers
  • From: Tejun Heo
• Re: [PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers
  • From: Jeff Garzik
• Re: [PATCH 2.6.19-rc6][RESEND] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Jeff Garzik
• Re: [PATCH] libata: don't schedule EH on wcache on/off if old EH
  • From: Jeff Garzik
• Re: [PATCH] libata: fix scsi_host_template in drivers
  • From: Jeff Garzik
• Re: [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Jeff Garzik
• Re: [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Jeff Garzik
• Re: [PATCH] pata_it821x: Suspend/Resume support
  • From: Jeff Garzik
• Re: [PATCH 2.6.19-rc6] sata_promise updates
  • From: Jeff Garzik
• [PATCH] libata: waits up to 10 microseconds for early irq problem
  • From: Albert Lee
• Re: Intel DQ965GF experiences
  • From: Robin H. Johnson
• RE: [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Allen Martin
• Intel DQ965GF experiences
  • From: Sami Farin
• Re: [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Jeff Garzik
• Re: [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Jeff Garzik
• Re: [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Andrew Morton
• Re: [PATCH] IDE: typo in ide-io.c leads to faulty assignment
  • From: Elias Oltmanns
• [PATCH] pata_it821x: Suspend/Resume support
  • From: Alan
• Re: [PATCH] IDE: typo in ide-io.c leads to faulty assignment
  • From: Jesper Juhl
• Re: [PATCH] IDE: typo in ide-io.c leads to faulty assignment
  • From: Alan
• [PATCH] IDE: typo in ide-io.c leads to faulty assignment
  • From: Elias Oltmanns
• [PATCH -mm] sata_nv: fix ATAPI in ADMA mode
  • From: Robert Hancock
• pata_ali: troubles with interrupt
  • From: Luca Tettamanti
• Re: pata_via in 2.6.19-rc6: UDMA/66 hdd downgraded to UDMA/33
  • From: Krzysztof Oledzki
• Re: pata_via in 2.6.19-rc6: UDMA/66 hdd downgraded to UDMA/33
  • From: Alan
• pata_via in 2.6.19-rc6: UDMA/66 hdd downgraded to UDMA/33
  • From: Krzysztof Oledzki
• Re: [PATCH] ahci: do not powerdown during initialization
  • From: Berck E. Nash
• Re: [PATCH 2.6.19-rc6] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Jeff Garzik
• ICH8-R without NCQ support?
  • From: Manoj Kasichainula
• Re: [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Tejun Heo
• Re: [PATCH 2.6.19-rc6] sata_promise updates
  • From: Mikael Pettersson
• Re: [PATCH 2.6.19-rc6] sata_promise updates
  • From: Mikael Pettersson
• Kernel slow to boot in 2.6.18
  • From: Bernd Schmidt
• [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Jason Gaston
• Re: [PATCH 1/1] sgiioc4: Disable module unload
  • From: Bartlomiej Zolnierkiewicz
• Re: 2007 Linux Storage & Filesystem Workshop
  • From: Federico Levi
• RE: [PATCH 2.6.19-rc6] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Gaston, Jason D
• Re: 2007 Linux Storage & Filesystem Workshop
  • From: Ric Wheeler
• Re: [PATCH 2.6.19-rc6] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Arjan van de Ven
• [PATCH] libata: fix scsi_host_template in drivers
  • From: Tejun Heo
• [PATCH] libata: don't schedule EH on wcache on/off if old EH
  • From: Tejun Heo
• [PATCH] libata: make sure sdev doesn't go away while rescanning
  • From: Tejun Heo
• Re: [PATCH 1/1] sgiioc4: Disable module unload
  • From: Andrew Morton
• Re: [PATCH 1/1] sgiioc4: Disable module unload
  • From: Jeremy Higdon
• Re: [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Tejun Heo
• RE: [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Gaston, Jason D
• Re: [PATCH 1/1] sgiioc4: Disable module unload
  • From: Andrew Morton
• Re: [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Tejun Heo
• Re: [PATCH 2.6.19-rc6] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Tejun Heo
• Re: [PATCH 2.6.19-rc6] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Tejun Heo
• [PATCH 2.6.19-rc6][RESEND] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Jason Gaston
• [PATCH 2.6.19-rc6][RESEND] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Jason Gaston
• RE: [PATCH 2.6.19-rc6] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Gaston, Jason D
• [PATCH 2.6.19-rc6] ahci: AHCI mode SATA patch for Intel ICH9
  • From: Jason Gaston
• [PATCH 2.6.19-rc6] ata_piix: IDE mode SATA patch for Intel ICH9
  • From: Jason Gaston
• Re: [PATCH 2.6.19-rc6] sata_promise updates
  • From: Jeff Garzik
• Re: [PATCH 2.6.19-rc6] sata_promise updates
  • From: Jeff Garzik
• Re: [PATCH 2.6.19-rc6] sata_promise updates
  • From: Jeff Garzik
• [PATCH 2.6.19-rc6] sata_promise updates
  • From: Mikael Pettersson
• SiI3124 PCI master Abort error
  • From: Rune Torgersen
• Re: [PATCH] drivers/ide: PATA driver for Celleb
  • From: Alan
• Re: [PATCH] drivers/ide: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [PATCH] pata_marvell: fix cable detection - take 2
  • From: Arnaud Patard
• Re: [PATCH] drivers/ide: PATA driver for Celleb
  • From: Tejun Heo
• [PATCH] drivers/ide: PATA driver for Celleb
  • From: Akira Iguchi
• Re: CDROM drive not found when booting using new libata code
  • From: Tejun Heo
• Re: [PMP] sil3132 st6600 problem
  • From: Daniel Schröder
• Re: pata_amd.c version 0.2.4
  • From: Tejun Heo
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Tejun Heo
• Re: [PMP] sil3132 st6600 problem
  • From: Tejun Heo
• [PATCH 1/1] sgiioc4: Disable module unload
  • From: Jeremy Higdon
• [PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers
  • From: Tejun Heo
• [PATCH] libata: don't request sense if the port is frozen
  • From: Tejun Heo
• Re: [PATCH 1/8] pcmcia: Add an id to ide-cs.c
  • From: Russell King
• Re: [PATCH] pata_marvell: fix cable detection - take 2
  • From: Alan Cox
• Driver for the Promise sx4000 HW RAID card
  • From: Tom Fredrik Blenning Klaussen
• [PATCH] pata_marvell: fix cable detection - take 2
  • From: Arnaud Patard
• [PATCH 1/1] libata: Fixup ata_sas_queuecmd to handle __ata_scsi_queuecmd failure
  • From: Brian King
• Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Nicolas Mailhot
• Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Nicolas Mailhot
• Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Bill Davidsen
• Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Lee Revell
• Re: [PATCH 1/8] pcmcia: Add an id to ide-cs.c
  • From: Dominik Brodowski
• problem with ata_piix + ICH8 on Abit AB9 Pro
  • From: Jonas Lundgren
• Re: [PATCH 1/8] pcmcia: Add an id to ide-cs.c
  • From: Russell King
• [PATCH] libata: fix SCSI/ATA device association during hotplug
  • From: Tejun Heo
• [PATCH] libata: use ata_scsi_find_dev() in ata_scsi_slave_config()
  • From: Tejun Heo
• [PATCH] libata: print cdb[0] in failed qc report
  • From: Tejun Heo
• [PATCH] ahci: do not powerdown during initialization
  • From: Tejun Heo
• Re: AHCI and add_disk_randomness()
  • From: Tejun Heo
• RE: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Peer Chen
• [PATCH] libata: fix READ CAPACITY simulation
  • From: Tejun Heo
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Nicolas DET
• Re: [PATCH 2/8] pcmcia: yet another IDE ID
  • From: Alan
• [PATCH 2/8] pcmcia: yet another IDE ID
  • From: Dominik Brodowski
• [PATCH 1/8] pcmcia: Add an id to ide-cs.c
  • From: Dominik Brodowski
• Re: possibility to merge via_pata fixes to .19 stable series?
  • From: Andrew Morton
• Re: possibility to merge via_pata fixes to .19 stable series?
  • From: Tejun Heo
• Re: possibility to merge via_pata fixes to .19 stable series?
  • From: Andrew Morton
• Re: Kernel config question on Hitachi HTS541080G9SA00, Intel 945pm Express, SATA drive on Dell e1505 Inspiron
  • From: Marc D Ronell
• Re: possibility to merge via_pata fixes to .19 stable series?
  • From: Alan
• Re: possibility to merge via_pata fixes to .19 stable series?
  • From: Jeff Garzik
• Re: [PATCH] pata_marvell: fix cable detection
  • From: Alan
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Sylvain Munaut
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Jeff Garzik
• bug: AHCI: Serial ATA to CompactFlash adapter loops endlessly
  • From: Benjamin LaHaise
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Sylvain Munaut
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Sylvain Munaut
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Jarno Manninen
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Jeff Garzik
• [PATCH] pata_marvell: fix cable detection
  • From: Arnaud Patard
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Heikki Orsila
• Re: [Q] workaround for ide (native) leads to irq storm?
  • From: Vasily Averin
• RE: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Peer Chen
• [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  • From: Mark Lord
• [PATCH 2/2 UPDATED] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  • From: Tejun Heo
• [PATCH 2/2] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  • From: Tejun Heo
• [PATCH 1/2] libata: move BMDMA host status recording from EH to interrupt handler
  • From: Tejun Heo
• [PATCH] libata: remove unused HSM_ST_UNKNOWN
  • From: Tejun Heo
• Re: [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Alan
• 2.6.19-rc5-mm2: WARNING at drivers/ata/sata_nv.c:762 nv_adma_bmdma_setup()
  • From: Nicolas Mailhot
• [PATCH/RFC] ata: Add support for the MPC52xx ATA controller using libata
  • From: Sylvain Munaut
• Re: Testing with 2.6.19-rc5
  • From: Andrew Morton
• Re: 2.6.19-rc5: Geode GX IDE and compact flash issues
  • From: Jordan Crouse
• pata_hpt37x problem when writing on ports 2&3 with RocketRaid 1540
  • From: Brad Campbell
• Re: AHCI and add_disk_randomness()
  • From: Jens Axboe
• Re: [PATCH] clear garbage after CDBs on SG_IO
  • From: Tejun Heo
• Re: Testing with 2.6.19-rc5
  • From: Andrew Lyon
• AW: Promise SATA vendor drivers uploaded
  • From: Martin Bene
• Re: [PATCH] clear garbage after CDBs on SG_IO
  • From: Andrew Morton
• Re: [Q] PCI Express and ide (native) leads to irq storm?
  • From: Vasily Averin
• Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Nicolas Mailhot
• Re: 2.6.19-rc5: Geode GX IDE and compact flash issues
  • From: Ben Gardner
• Re: 2.6.19-rc5: Geode GX IDE and compact flash issues
  • From: Ben Gardner
• Re: [PATCH] clear garbage after CDBs on SG_IO
  • From: Jeff Garzik
• [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2
  • From: Tejun Heo
• [PATCH] clear garbage after CDBs on SG_IO
  • From: Tejun Heo
• Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Tejun Heo
• Re: 2.6.19-rc5: Geode GX IDE and compact flash issues
  • From: Alan
• Re: 2.6.19-rc5: Geode GX IDE and compact flash issues
  • From: Jordan Crouse
• Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root
  • From: Nicolas Mailhot
• 2.6.19-rc5: Geode GX IDE and compact flash issues
  • From: Ben Gardner
• AHCI and add_disk_randomness()
  • From: Marek Podmaka
• Promise SATA vendor drivers uploaded
  • From: Jeff Garzik
• Re: ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Jeff Garzik
• Re: ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Pavel Roskin
• Re: Testing with 2.6.19-rc5
  • From: Andrew Morton
• Re: [Q] PCI Express and ide (native) leads to irq storm?
  • From: Jeff Garzik
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Alan
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Arjan van de Ven
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Phillip Susi
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Tejun Heo
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Mathieu Fluhr
• Testing with 2.6.19-rc5
  • From: Andrew Lyon
• Re : Re : sata_sil problems with SIL3512 controler on a ppc target
  • From: snatcher snatcher
• Re: Re : sata_sil problems with SIL3512 controler on a ppc target
  • From: Tejun Heo
• Re: ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Tejun Heo
• Re: ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Alan
• Re: ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Tejun Heo
• Re: [Q] PCI Express and ide (native) leads to irq storm?
  • From: Tejun Heo
• Re: ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Pavel Roskin
• ata_piix on Thinkpad T30 - qc timeout on boot
  • From: Pavel Roskin
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Monty Montgomery
• Re: [PATCH 2/4] libata: separate out rw ATA taskfile building into ata_build_tf()
  • From: Mark Lord
• Re: [PATCH 1/5] libata: sync result_tf.flags w/ command tf.flags
  • From: Jeff Garzik
• Re: [PATCH] libata: improve failed qc reporting
  • From: Jeff Garzik
• Re: [PATCH] libata: trivial updates to ata_sg_init_one()
  • From: Jeff Garzik
• Re: [PATCH 1/5] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [patch] libata: change order of _SDD/_GTF execution (resend #3)
  • From: Jeff Garzik
• Re: [PATCH UPDATED] libata: use FLUSH_EXT only when driver is larger than LBA28 limit
  • From: Jeff Garzik
• Re: [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: s/host_set/host/
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Mark Lord
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Tejun Heo
• Re: [PATCH 2/4] libata: separate out rw ATA taskfile building into ata_build_tf()
  • From: Tejun Heo
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Mark Lord
• Re: [PATCH 2/4] libata: separate out rw ATA taskfile building into ata_build_tf()
  • From: Mark Lord
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Mathieu Fluhr
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] pata_artop: fix "& (1 >>" typo
  • From: Jeff Garzik
• [PATCH 2/4] libata: separate out rw ATA taskfile building into ata_build_tf()
  • From: Tejun Heo
• [PATCH 4/4] libata: improve media error handling
  • From: Tejun Heo
• [PATCH 1/4] libata: implement ata_exec_internal_sg()
  • From: Tejun Heo
• [PATCH 3/4] libata: prepare ata_sg_clean() for invocation from EH
  • From: Tejun Heo
• [PATCHSET] libata: improve media error handling
  • From: Tejun Heo
• [PATCH 4/5] libata: implement ata_tf_read_block()
  • From: Tejun Heo
• [PATCH 5/5] libata: improve SCSI sense data generation
  • From: Tejun Heo
• [PATCH 3/5] libata: cosmetic changes to sense generation functions
  • From: Tejun Heo
• [PATCH 1/5] libata: sync result_tf.flags w/ command tf.flags
  • From: Tejun Heo
• [PATCHSET] libata: improve sense data generation
  • From: Tejun Heo
• [PATCH 2/5] libata: fix passthru sense data header
  • From: Tejun Heo
• [PATCH] libata: improve failed qc reporting
  • From: Tejun Heo
• [PATCH] libata: trivial updates to ata_sg_init_one()
  • From: Tejun Heo
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jens Axboe
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Brice Goglin
• Re: Is the SIL 3112 capable of PMP support?
  • From: Brad Campbell
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jens Axboe
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Brice Goglin
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Mathieu Fluhr
• [Q] PCI Express and ide (native) leads to irq storm?
  • From: Vasily Averin
• Re: 2.6.19-rc5: known regressions with patches
  • From: Jeff Garzik
• Kernel config question on Hitachi HTS541080G9SA00, Intel 945pm Express, SATA drive on Dell e1505 Inspiron
  • From: Marc D Ronell
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Tejun Heo
• Re: 2.6.19-rc5: known regressions with patches
  • From: Linus Torvalds
• Re: 2.6.19-rc5: known regressions with patches
  • From: Brian King
• [PATCH 1/1] libata: Convert from module_init to subsys_initcall (resend)
  • From: Brian King
• 2.6.19-rc5: known regressions with patches
  • From: Adrian Bunk
• Re: [RFT PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via
  • From: matthieu castet
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Arjan van de Ven
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Mathieu Fluhr
• Re: READ SCSI cmd seems to fail on SATA optical devices...
  • From: Phillip Susi
• READ SCSI cmd seems to fail on SATA optical devices...
  • From: Mathieu Fluhr
• Re: Is the SIL 3112 capable of PMP support?
  • From: Tejun Heo
• Re: Is the SIL 3112 capable of PMP support?
  • From: Jeff Garzik
• Limiting SATA port speed to 1.5Gbs
  • From: Bradley Baetz
• Is the SIL 3112 capable of PMP support?
  • From: Brad Campbell
• Re: [Fwd: promise-sata-pata, No release code PATA port on Promise PDC20579, TODO?]
  • From: thomas schorpp
• AHCI detection issues
  • From: aaltoset
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Luben Tuikov
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Douglas Gilbert
• Re: [PATCH][TRIVIAL] drivers/ide: stray bracket
  • From: Nicolas Kaiser
• Re: [PATCH][TRIVIAL] drivers/ide: stray bracket
  • From: Alexey Dobriyan
• [Fwd: promise-sata-pata, No release code PATA port on Promise PDC20579, TODO?]
  • From: thomas schorpp
• [PATCH UPDATED] libata: use FLUSH_EXT only when driver is larger than LBA28 limit
  • From: Tejun Heo
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Christoph Hellwig
• Re: ASUS P5B and AHCI with 4 SATA drives (reminder)
  • From: Tejun Heo
• Re: [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• [PMP] sil3132 st6600 problem
  • From: Daniel Schröder
• [PATCH][TRIVIAL] drivers/ide: stray bracket
  • From: Nicolas Kaiser
• Re: Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Fredrik
• ASUS P5B and AHCI with 4 SATA drives (reminder)
  • From: Mathias Jeschke
• [patch] libata: change order of _SDD/_GTF execution (resend #3)
  • From: Kristen Carlson Accardi
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Luben Tuikov
• Re: [PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limit
  • From: Stefan Seyfried
• Re: [PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limit
  • From: Tejun Heo
• [PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limit
  • From: Tejun Heo
• Re: [PATCH] pata_artop: fix "& (1 >>" typo
  • From: Alan Cox
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jens Axboe
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Brice Goglin
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jens Axboe
• [PATCH] pata_artop: fix "& (1 >>" typo
  • From: Alexey Dobriyan
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Douglas Gilbert
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Luben Tuikov
• [PATCH 5/5] ata_piix: strip now unneded MAP related stuff
  • From: Tejun Heo
• [PATCHSET #upstream] libata: implement presence detection using polling IDENTIFY for ata_piix, take #2
  • From: Tejun Heo
• [PATCH 1/5] ata_piix: clean up port flags
  • From: Tejun Heo
• [PATCH 2/5] libata: convert @post_reset to @flags in ata_dev_read_id()
  • From: Tejun Heo
• [PATCH 4/5] ata_piix: apply device detection via polling IDENTIFY
  • From: Tejun Heo
• [PATCH 3/5] libata: implement presence detection via polling IDENTIFY
  • From: Tejun Heo
• Acer Aspire 3682 with ICH7 can't be configured to use UDMA66 and higher
  • From: jozwicki
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Tejun Heo
• Re: sata_nv failure on 2.4.18 (Fedora Core 6)
  • From: Jonathan Cohen
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Monty Montgomery
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Monty Montgomery
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jano
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jano
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jano
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Phillip Susi
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jano
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Douglas Gilbert
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Phillip Susi
• [PATCH] sata_via: add VT6421 PATA support
  • From: Tomasz Chmielewski
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Jeff Garzik
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Tejun Heo
• Re: Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Andrew Lyon
• Re: Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Bill Davidsen
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re : sata_sil problems with SIL3512 controler on a ppc target
  • From: snatcher snatcher
• Re: 2.6.19-rc3 system freezes when ripping with cdparanoia at ioctl(SG_IO)
  • From: Brice Goglin
• [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• [PATCH] sata_vsc: s/host_set/host/
  • From: Tejun Heo
• sata_sil problems with SIL3512 controler on a ppc target
  • From: snatcher snatcher
• Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
  • From: Jiri Slaby
• Re: PATA driver for ide-pmac?
  • From: Benjamin Herrenschmidt
• Re: sata_via broken in 2.6.19rc4
  • From: Jeff Garzik
• Re: PATA driver for ide-pmac?
  • From: Jeff Garzik
• Re: sata_mv 7042 support and port multipliers
  • From: Jeff Garzik
• Re: sata_mv 7042 support and port multipliers
  • From: Robin H. Johnson
• Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Andrew Lyon
• Re: Problems with Samsung SH-W163A SATA CD/DVDRW JMicron 20360/20363 2.6.18.1
  • From: Alan Cox
• Re: [PATCH 1/1] libata: Convert from module_init to subsys_initcall
  • From: Brian King
• RE: pata_amd.c version 0.2.4
  • From: Andrei Tanas
• [git patches] libata via probe fix
  • From: Jeff Garzik
• PATA driver for ide-pmac?
  • From: Robin H. Johnson
• Re: [PATCH 2/2] Workaround for SB600 SATA ODD issue
  • From: Jeff Garzik
• [PATCH 2.6.19-rc4-mm2] sata_sis: slave support on SiS965
  • From: Uwe Koziolek
• Re: [PATCH 2.6.19-rc4-mm2] sata_sis: slave support on SiS965
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: Jeff Garzik
• sata_via broken in 2.6.19rc4
  • From: Martin Devera
• Re: Libata and Drive Write Cache Disable
  • From: Don Dupuis
• Re: Libata and Drive Write Cache Disable
  • From: Mark Lord
• Re: sata_mv 7042 support and port multipliers
  • From: Mark Lord
• 2.6.19-rc4: known unfixed regressions (v4)
  • From: Adrian Bunk
• RE: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Peer Chen
• Re: [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• Re: [PATCH 1/2 #upstream] ahci: preserve PORTS_IMPL over host resets
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: daniel@xxxxxxxxxxxxxxxx
• Libata and Drive Write Cache Disable
  • From: Don Dupuis
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: daniel@xxxxxxxxxxxxxxxx
• Re: Supported chipsets with sata_sil24?
  • From: Tejun Heo
• Re: Supported chipsets with sata_sil24?
  • From: John Woznack
• Re: sata_mv 7042 support and port multipliers
  • From: Jeff Garzik
• sata_mv 7042 support and port multipliers
  • From: Robin H. Johnson
• Re: [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Robin H. Johnson
• [PATCH] Add MPC52xx PIO/ATA support for arch/powerpc
  • From: Nicolas DET
• Re: More Promise chipset specs opened
  • From: otto Meier
• Re: More Promise chipset specs opened
  • From: Jeff Garzik
• Re: More Promise chipset specs opened
  • From: otto Meier
• Re: Supported chipsets with sata_sil24?
  • From: Tejun Heo
• Supported chipsets with sata_sil24?
  • From: John Woznack
• Re: More Promise chipset specs opened
  • From: Jeff Garzik
• Re: recommendations for a *stable* sata card
  • From: Soeren Sonnenburg
• Re: And Again: VIA SATA drivers for Linux
  • From: Paul de Leng
• More Promise chipset specs opened
  • From: otto Meier
• Re: And Again: VIA SATA drivers for Linux
  • From: Alan Cox
• And Again: VIA SATA drivers for Linux
  • From: Paul de Leng
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Brad Campbell
• RE: [PATCH ] ahci: Add the support of nvidia AHCI controllers of MCP67 to ahci.c
  • From: Peer Chen
• Re: [git patches] libata: some last minute PCI IDs
  • From: Jeff Garzik
• [git patches] libata PCI ids (updated)
  • From: Jeff Garzik
• Buffer-cache corruption with SMP + PIO IDE
  • From: Nathaniel Case
• Re: [git patches] libata: some last minute PCI IDs
  • From: Andrew Morton
• [git patches] libata: some last minute PCI IDs
  • From: Jeff Garzik
• Re: [PATCH ] ahci: Add the support of nvidia AHCI controllers of MCP67 to ahci.c
  • From: Jeff Garzik
• Re: [PATCH 2/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Jeff Garzik
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Alan Cox
• Re: AHCI should try to claim all AHCI controllers
  • From: Martin Waitz
• Re: [PATCH 1/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Alan Cox
• Re: [PATCH 2/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Alan Cox
• Re: [git patches] libata fixes
  • From: Jens Axboe
• More Promise chipset specs opened
  • From: Jeff Garzik
• Promise 20319 chipset specs opened
  • From: Jeff Garzik
• [PATCH 1/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Peer Chen
• [PATCH 2/2] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.c & pata_amd.c
  • From: Peer Chen
• [PATCH ] ahci: Add the support of nvidia AHCI controllers of MCP67 to ahci.c
  • From: Peer Chen
• [PATCH 2/2 #upstream] ahci: honor PORTS_IMPL on ICH8s
  • From: Tejun Heo
• [PATCH 1/2 #upstream] ahci: preserve PORTS_IMPL over host resets
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Andrew Morton
• [KJ][PATCH] ata: remove compiler warnings
  • From: Mike D. Day
• Re: sata_promise issue with SATA 300 TX4 (PDC40718)
  • From: Ansgar Knappheide
• Re: [git patches] libata fixes
  • From: Alan Cox
• Re: AHCI should try to claim all AHCI controllers
  • From: Mark Lord
• RE: SATA HSM error
  • From: Rune Torgersen
• Re: [git patches] libata fixes
  • From: John Stoffel
• RE: AHCI should try to claim all AHCI controllers
  • From: Conke Hu
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Brad Campbell
• Re: AHCI should try to claim all AHCI controllers
  • From: Alan Cox
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Alan Cox
• Re: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67support to sata_nv.c
  • From: Jeff Garzik
• Re: [PATCH 1/3 #upstream] libata: implement ATA_EHI_PRINTINFO
  • From: Jeff Garzik
• RE: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67support to sata_nv.c
  • From: Peer Chen
• Re: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67support to sata_nv.c
  • From: Jeff Garzik
• [PATCH] libata: move dev->max_sectors configuration into ata_dev_configure()
  • From: Tejun Heo
• [PATCH 2/3 #upstream] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODE
  • From: Tejun Heo
• [PATCH 1/3 #upstream] libata: implement ATA_EHI_PRINTINFO
  • From: Tejun Heo
• Re: Fun with HPT302N (Rocket Raid 1520 PCI card)
  • From: Jeff Garzik
• Re: [PATCH 1/3 #upstream] ahci: kill AHCI_FLAG_RESET_NEEDS_CLO
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: fix status register check in ahci_softreset
  • From: Jeff Garzik
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Tejun Heo
• [PATCH 2/2] sata_nv: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• [PATCH 3/3 #upstream] ahci: update ahci-vt8251 reset sequence
  • From: Tejun Heo
• [PATCH 2/3 #upstream] libata: separate out and export sata_port_hardreset()
  • From: Tejun Heo
• [PATCH 1/3 #upstream] ahci: kill AHCI_FLAG_RESET_NEEDS_CLO
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: fix status register check in ahci_softreset
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Arjan van de Ven
• [PATCH 1/2] sata_nv: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Peer Chen
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [PATCH 3/6] libata: convert @post_reset to @flags in ata_dev_read_id()
  • From: Jeff Garzik
• Re: AHCI should try to claim all AHCI controllers
  • From: Jeff Garzik
• Re: AHCI should try to claim all AHCI controllers
  • From: Linus Torvalds
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [PATCH 7/12] sata_sil24: add PMP related constants
  • From: Jeff Garzik
• Re: [PATCH 6/12] sata_sil24: rename PMP related constants
  • From: Jeff Garzik
• Re: [PATCH] libata: make user scan wait for scan to complete
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: SRST sometimes fails after hotplug, use HRST_TO_RESUME
  • From: Jeff Garzik
• Re: [PATCH] libata: move ata_irq_on() into libata-sff.c
  • From: Jeff Garzik
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Tejun Heo
• Re: AHCI should try to claim all AHCI controllers
  • From: Jeff Garzik
• Re: AHCI should try to claim all AHCI controllers
  • From: Jeff Garzik
• Re: [PATCH 1/6] ata_piix: clean up port flags
  • From: Jeff Garzik
• Re: [PATCH] libata: handle 0xff status properly
  • From: Jeff Garzik
• Re: [PATCHSET] prep for PMP support, take 3
  • From: Tejun Heo
• Re: [PATCHSET] hotplug polling, take 5
  • From: Tejun Heo
• Re: [PATCHSET] hotplug polling, take 5
  • From: Jeff Garzik
• Re: [PATCHSET] hotplug polling, take 5
  • From: Tejun Heo
• Re: SATA HSM error
  • From: Tejun Heo
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Jeff Garzik
• Re: [PATCHSET] implement ata_link, take 3
  • From: Jeff Garzik
• Re: [PATCH 10/18] [PATCH] libata-link: separate out link initialization functions
  • From: Jeff Garzik
• Re: [PATCHSET] prep for PMP support, take 3
  • From: Jeff Garzik
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [Patch] SCSI: Add nvidia AHCI controllers of MCP67 support to ahci.c
  • From: Jeff Garzik
• Re: [PATCHSET] hotplug polling, take 5
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ATA passthrough handling for ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH 4/4] sata_sil: implement Mod15Write workaround by split request processing
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata: implement ATA_EHI_PRINTINFO
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: Add MSI support to sata_vsc driver (resubmit) (fixed attachment)
  • From: Jeff Garzik
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Jeff Garzik
• Re: [Patch 1/2] SCSI: Add nvidia SATA controllers of MCP67 support to sata_nv.c
  • From: Jeff Garzik