Dear everyone,
This is the patch (based on 2.6.19) for PATA controller of
Toshiba Cell reference set(Celleb). Last month I sent the
patch for drivers/ide and received some useful comments.
I'm sorry for the late reply, because I have reimplemented
the libata version.
I use some static functions in libata-core.c because it makes
ata_scc.c simpler. Therefore in this patch, these functions are
defined using EXPORT_SYMBOL_GPL() and some inline functions are
move to libata.h. If you mind it, please tell me.
This patch set is intended to be merged to 2.6.20.
Signed-off-by: Kou Ishizaki <kou.ishizaki at toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi at toshiba.co.jp>
---
Index: linux-2.6.19/drivers/ata/Kconfig
diff -c linux-2.6.19/drivers/ata/Kconfig:1.1.1.2 linux-2.6.19/drivers/ata/Kconfig:1.3
*** linux-2.6.19/drivers/ata/Kconfig:1.1.1.2 Tue Oct 24 13:38:08 2006
--- linux-2.6.19/drivers/ata/Kconfig Wed Dec 6 09:35:02 2006
***************
*** 483,488 ****
--- 483,497 ----
If unsure, say N.
+ config ATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_CELLEB
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
endif
endmenu
Index: linux-2.6.19/drivers/ata/Makefile
diff -c linux-2.6.19/drivers/ata/Makefile:1.1.1.1 linux-2.6.19/drivers/ata/Makefile:1.3
*** linux-2.6.19/drivers/ata/Makefile:1.1.1.1 Fri Oct 6 10:42:11 2006
--- linux-2.6.19/drivers/ata/Makefile Wed Dec 6 09:35:03 2006
***************
*** 57,62 ****
--- 57,63 ----
obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
# Should be last libata driver
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
+ obj-$(CONFIG_ATA_SCC) += ata_scc.o
libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o
Index: linux-2.6.19/drivers/ata/ata_scc.c
diff -c /dev/null linux-2.6.19/drivers/ata/ata_scc.c:1.3
*** /dev/null Tue Dec 12 08:33:56 2006
--- linux-2.6.19/drivers/ata/ata_scc.c Mon Dec 11 11:48:45 2006
***************
*** 0 ****
--- 1,2038 ----
+ /*
+ * ata_scc.c - Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ata/ata_piix.c:
+ * Copyright 2003-2005 Red Hat Inc
+ * Copyright 2003-2005 Jeff Garzik
+ * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
+ * Copyright (C) 1998-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
+ * Copyright (C) 2003 Red Hat Inc <alan@xxxxxxxxxx>
+ *
+ * and drivers/ata/libata-core.c:
+ * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2004 Jeff Garzik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/pci.h>
+ #include <linux/init.h>
+ #include <linux/blkdev.h>
+ #include <linux/delay.h>
+ #include <linux/device.h>
+ #include <scsi/scsi_host.h>
+ #include <linux/libata.h>
+
+ #define DRV_NAME "ata_scc"
+ #define DRV_VERSION "0.1"
+
+ #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+
+ /* offset of CTRL registers */
+ #define SCC_CTL_PIOSHT 0x000
+ #define SCC_CTL_PIOCT 0x004
+ #define SCC_CTL_MDMACT 0x008
+ #define SCC_CTL_MCRCST 0x00C
+ #define SCC_CTL_SDMACT 0x010
+ #define SCC_CTL_SCRCST 0x014
+ #define SCC_CTL_UDENVT 0x018
+ #define SCC_CTL_TDVHSEL 0x020
+ #define SCC_CTL_MODEREG 0x024
+ #define SCC_CTL_ECMODE 0xF00
+ #define SCC_CTL_MAEA0 0xF50
+ #define SCC_CTL_MAEC0 0xF54
+ #define SCC_CTL_CCKCTRL 0xFF0
+
+ /* offset of BMID registers */
+ #define SCC_DMA_CMD 0x000
+ #define SCC_DMA_STATUS 0x004
+ #define SCC_DMA_TABLE_OFS 0x008
+ #define SCC_DMA_INTMASK 0x010
+ #define SCC_DMA_INTST 0x014
+ #define SCC_DMA_PTERADD 0x018
+ #define SCC_REG_CMD_ADDR 0x020
+ #define SCC_REG_DATA 0x000
+ #define SCC_REG_ERR 0x004
+ #define SCC_REG_FEATURE 0x004
+ #define SCC_REG_NSECT 0x008
+ #define SCC_REG_LBAL 0x00C
+ #define SCC_REG_LBAM 0x010
+ #define SCC_REG_LBAH 0x014
+ #define SCC_REG_DEVICE 0x018
+ #define SCC_REG_STATUS 0x01C
+ #define SCC_REG_CMD 0x01C
+ #define SCC_REG_ALTSTATUS 0x020
+
+ /* register value */
+ #define TDVHSEL_MASTER 0x00000001
+ #define TDVHSEL_SLAVE 0x00000004
+
+ #define MODE_JCUSFEN 0x00000080
+
+ #define ECMODE_VALUE 0x01
+
+ #define CCKCTRL_ATARESET 0x00040000
+ #define CCKCTRL_BUFCNT 0x00020000
+ #define CCKCTRL_CRST 0x00010000
+ #define CCKCTRL_OCLKEN 0x00000100
+ #define CCKCTRL_ATACLKOEN 0x00000002
+ #define CCKCTRL_LCLKEN 0x00000001
+
+ #define QCHCD_IOS_SS 0x00000001
+
+ #define QCHSD_STPDIAG 0x00020000
+
+ #define INTMASK_MSK 0xD1000012
+ #define INTSTS_SERROR 0x80000000
+ #define INTSTS_PRERR 0x40000000
+ #define INTSTS_RERR 0x10000000
+ #define INTSTS_ICERR 0x01000000
+ #define INTSTS_BMSINT 0x00000010
+ #define INTSTS_BMHE 0x00000008
+ #define INTSTS_IOIRQS 0x00000004
+ #define INTSTS_INTRQ 0x00000002
+ #define INTSTS_ACTEINT 0x00000001
+
+
+ typedef struct scc_ports {
+ void __iomem *ctl_base;
+ void __iomem *dma_base;
+ } scc_ports;
+
+ /* PIO transfer mode table */
+ /* JCHST */
+ static const unsigned long JCHSTtbl[2][7] = {
+ {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
+ };
+
+ /* JCHHT */
+ static const unsigned long JCHHTtbl[2][7] = {
+ {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
+ };
+
+ /* JCHCT */
+ static const unsigned long JCHCTtbl[2][7] = {
+ {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
+ {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
+ };
+
+ /* DMA transfer mode table */
+ /* JCHDCTM/JCHDCTS */
+ static const unsigned long JCHDCTxtbl[2][7] = {
+ {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
+ {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
+ };
+
+ /* JCSTWTM/JCSTWTS */
+ static const unsigned long JCSTWTxtbl[2][7] = {
+ {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
+ {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+ };
+
+ /* JCTSS */
+ static const unsigned long JCTSStbl[2][7] = {
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
+ };
+
+ /* JCENVT */
+ static const unsigned long JCENVTtbl[2][7] = {
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+ };
+
+ /* JCACTSELS/JCACTSELM */
+ static const unsigned long JCACTSELtbl[2][7] = {
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
+ };
+
+
+ static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev);
+ static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+ static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf);
+ static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf);
+ static void scc_exec_command (struct ata_port *ap, const struct ata_taskfile *tf);
+ static u8 scc_check_status (struct ata_port *ap);
+ static u8 scc_check_altstatus (struct ata_port *ap);
+ static void scc_std_dev_select (struct ata_port *ap, unsigned int device);
+ static void scc_bmdma_setup (struct ata_queued_cmd *qc);
+ static void scc_bmdma_start (struct ata_queued_cmd *qc);
+ static void scc_bmdma_stop (struct ata_queued_cmd *qc);
+ static u8 scc_bmdma_status (struct ata_port *ap);
+ static void scc_data_xfer (struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data);
+ static inline u8 scc_irq_on (struct ata_port *ap);
+ static inline u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq);
+ static void scc_hsm_qc_complete (struct ata_queued_cmd *qc, int in_wq);
+ static int scc_hsm_move (struct ata_port *ap, struct ata_queued_cmd *qc, u8 status, int in_wq);
+ static void scc_pio_task (void *_data);
+ static unsigned int scc_qc_issue_prot (struct ata_queued_cmd *qc);
+ static void scc_bmdma_freeze (struct ata_port *ap);
+ static void scc_bmdma_thaw (struct ata_port *ap);
+ static void scc_bmdma_drive_eh (struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset);
+ static unsigned int scc_devchk (struct ata_port *ap, unsigned int device);
+ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask);
+ static unsigned int scc_bus_softreset (struct ata_port *ap, unsigned int devmask);
+ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes);
+ static void scc_std_postreset (struct ata_port *ap, unsigned int *classes);
+ static void scc_error_handler (struct ata_port *ap);
+ static inline unsigned int scc_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc);
+ static irqreturn_t scc_interrupt (int irq, void *dev_instance);
+ static void scc_bmdma_irq_clear (struct ata_port *ap);
+ static int scc_port_start (struct ata_port *ap);
+ static void scc_port_stop (struct ata_port *ap);
+ static void remove_mmio_scc (struct pci_dev *pdev);
+ static void scc_host_stop (struct ata_host *host);
+
+ static void scc_std_ports (struct ata_ioports *ioaddr);
+ static struct ata_probe_ent * scc_pci_init_native_mode (struct pci_dev *pdev, struct ata_port_info **port, int ports);
+ static int scc_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports);
+ static int setup_mmio_scc (struct pci_dev *dev, const char *name);
+ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+
+
+ static const struct pci_device_id scc_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { } /* terminate list */
+ };
+
+ static struct pci_driver scc_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = scc_pci_tbl,
+ .probe = scc_init_one,
+ .remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+ };
+
+ static struct scsi_host_template scc_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
+ };
+
+ static const struct ata_port_operations scc_pata_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = scc_set_piomode,
+ .set_dmamode = scc_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = scc_tf_load,
+ .tf_read = scc_tf_read,
+ .exec_command = scc_exec_command,
+ .check_status = scc_check_status,
+ .check_altstatus = scc_check_altstatus,
+ .dev_select = scc_std_dev_select,
+
+ .bmdma_setup = scc_bmdma_setup,
+ .bmdma_start = scc_bmdma_start,
+ .bmdma_stop = scc_bmdma_stop,
+ .bmdma_status = scc_bmdma_status,
+ .data_xfer = scc_data_xfer,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = scc_qc_issue_prot,
+
+ .freeze = scc_bmdma_freeze,
+ .thaw = scc_bmdma_thaw,
+ .error_handler = scc_error_handler,
+ .post_internal_cmd = scc_bmdma_stop,
+
+ .irq_handler = scc_interrupt,
+ .irq_clear = scc_bmdma_irq_clear,
+
+ .port_start = scc_port_start,
+ .port_stop = scc_port_stop,
+ .host_stop = scc_host_stop,
+ };
+
+
+ static struct ata_port_info scc_port_info[] = {
+ {
+ .sht = &scc_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x00,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &scc_pata_ops,
+ },
+
+ };
+
+ MODULE_AUTHOR("Toshiba corp");
+ MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
+ MODULE_LICENSE("GPL");
+ MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+ MODULE_VERSION(DRV_VERSION);
+
+ /**
+ * scc_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+ static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
+ {
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct scc_ports *ports = (struct scc_ports *) ap->host->private_data;
+ void __iomem *cckctrl_port = ports->ctl_base + SCC_CTL_CCKCTRL;
+ void __iomem *piosht_port = ports->ctl_base + SCC_CTL_PIOSHT;
+ void __iomem *pioct_port = ports->ctl_base + SCC_CTL_PIOCT;
+ unsigned long reg;
+ int offset;
+
+ reg = in_be32(cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN)
+ offset = 1; /* 133MHz */
+ else
+ offset = 0; /* 100MHz */
+
+ reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
+ out_be32(piosht_port, reg);
+ reg = JCHCTtbl[offset][pio];
+ out_be32(pioct_port, reg);
+ }
+
+ /**
+ * scc_set_dmamode - Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ * @udma: udma mode, 0 - 6
+ *
+ * Set UDMA mode for device.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+ static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+ {
+ unsigned int udma = adev->dma_mode;
+ unsigned int is_slave = (adev->devno != 0);
+ u8 speed = udma;
+ struct scc_ports *ports = (struct scc_ports *) ap->host->private_data;
+ void __iomem *cckctrl_port = ports->ctl_base + SCC_CTL_CCKCTRL;
+ void __iomem *mdmact_port = ports->ctl_base + SCC_CTL_MDMACT;
+ void __iomem *mcrcst_port = ports->ctl_base + SCC_CTL_MCRCST;
+ void __iomem *sdmact_port = ports->ctl_base + SCC_CTL_SDMACT;
+ void __iomem *scrcst_port = ports->ctl_base + SCC_CTL_SCRCST;
+ void __iomem *udenvt_port = ports->ctl_base + SCC_CTL_UDENVT;
+ void __iomem *tdvhsel_port = ports->ctl_base + SCC_CTL_TDVHSEL;
+ int offset, idx;
+
+ if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
+ offset = 1; /* 133MHz */
+ else
+ offset = 0; /* 100MHz */
+
+ if (speed >= XFER_UDMA_0)
+ idx = speed - XFER_UDMA_0;
+ else
+ return;
+
+ if (is_slave) {
+ out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32(tdvhsel_port,
+ (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
+ } else {
+ out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32(tdvhsel_port,
+ (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
+ }
+ out_be32(udenvt_port,
+ JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
+ }
+
+ /**
+ * scc_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Note: Original code is ata_tf_load_pio().
+ */
+
+ static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ out_be32((void __iomem *)ap->ioaddr.ctl_addr, tf->ctl);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ out_be32((void __iomem *)ioaddr->feature_addr, tf->hob_feature);
+ out_be32((void __iomem *)ioaddr->nsect_addr, tf->hob_nsect);
+ out_be32((void __iomem *)ioaddr->lbal_addr, tf->hob_lbal);
+ out_be32((void __iomem *)ioaddr->lbam_addr, tf->hob_lbam);
+ out_be32((void __iomem *)ioaddr->lbah_addr, tf->hob_lbah);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ out_be32((void __iomem *)ioaddr->feature_addr, tf->feature);
+ out_be32((void __iomem *)ioaddr->nsect_addr, tf->nsect);
+ out_be32((void __iomem *)ioaddr->lbal_addr, tf->lbal);
+ out_be32((void __iomem *)ioaddr->lbam_addr, tf->lbam);
+ out_be32((void __iomem *)ioaddr->lbah_addr, tf->lbah);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ out_be32((void __iomem *)ioaddr->device_addr, tf->device);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+ }
+
+ /**
+ * scc_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Note: Original code is ata_tf_read_pio().
+ */
+
+ static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = scc_check_status(ap);
+ tf->feature = in_be32((void __iomem *)ioaddr->error_addr);
+ tf->nsect = in_be32((void __iomem *)ioaddr->nsect_addr);
+ tf->lbal = in_be32((void __iomem *)ioaddr->lbal_addr);
+ tf->lbam = in_be32((void __iomem *)ioaddr->lbam_addr);
+ tf->lbah = in_be32((void __iomem *)ioaddr->lbah_addr);
+ tf->device = in_be32((void __iomem *)ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ out_be32((void __iomem *)ap->ioaddr.ctl_addr, tf->ctl | ATA_HOB);
+ tf->hob_feature = in_be32((void __iomem *)ioaddr->error_addr);
+ tf->hob_nsect = in_be32((void __iomem *)ioaddr->nsect_addr);
+ tf->hob_lbal = in_be32((void __iomem *)ioaddr->lbal_addr);
+ tf->hob_lbam = in_be32((void __iomem *)ioaddr->lbam_addr);
+ tf->hob_lbah = in_be32((void __iomem *)ioaddr->lbah_addr);
+ }
+ }
+
+ /**
+ * scc_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Note: Original code is ata_exec_command_pio().
+ */
+
+ static void scc_exec_command (struct ata_port *ap, const struct ata_taskfile *tf)
+ {
+ DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+
+ out_be32((void __iomem *)ap->ioaddr.command_addr, tf->command);
+ ata_pause(ap);
+ }
+
+ /**
+ * scc_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Note: Original code is ata_check_status_pio().
+ */
+
+ static u8 scc_check_status (struct ata_port *ap)
+ {
+ return in_be32((void __iomem *)ap->ioaddr.status_addr);
+ }
+
+ /**
+ * scc_check_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ */
+
+ static u8 scc_check_altstatus (struct ata_port *ap)
+ {
+ return in_be32((void __iomem *)ap->ioaddr.altstatus_addr);
+ }
+
+ /**
+ * scc_std_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ *
+ * Note: Original code is ata_std_dev_select().
+ */
+
+ static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+ {
+ u8 tmp;
+
+ if (device == 0)
+ tmp = ATA_DEVICE_OBS;
+ else
+ tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+ out_be32((void __iomem *)ap->ioaddr.device_addr, tmp);
+ ata_pause(ap);
+ }
+
+ /**
+ * scc_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_setup_pio().
+ */
+
+ static void scc_bmdma_setup (struct ata_queued_cmd *qc)
+ {
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* load PRD table addr. */
+ out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = in_be32(mmio + SCC_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ out_be32(mmio + SCC_DMA_CMD, dmactl);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+ }
+
+ /**
+ * scc_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_start_pio().
+ */
+
+ static void scc_bmdma_start (struct ata_queued_cmd *qc)
+ {
+ struct ata_port *ap = qc->ap;
+ u8 dmactl;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* start host DMA transaction */
+ dmactl = in_be32(mmio + SCC_DMA_CMD);
+ out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
+ }
+
+ /**
+ * scc_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @qc: Command we are ending DMA for
+ *
+ * Note: Original code is ata_bmdma_stop().
+ */
+
+ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
+ {
+ struct ata_port *ap = qc->ap;
+ struct scc_ports *ports = (struct scc_ports *) ap->host->private_data;
+ u32 reg;
+
+ while (1) {
+ reg = in_be32(ports->dma_base + SCC_DMA_INTST);
+
+ if (reg & INTSTS_SERROR) {
+ printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
+
+ out_be32(ports->dma_base + SCC_DMA_CMD,
+ in_be32(ports->dma_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ continue;
+ }
+
+ if (reg & INTSTS_PRERR) {
+ u32 maea0, maec0;
+
+ maea0 = in_be32(ports->ctl_base + SCC_CTL_MAEA0);
+ maec0 = in_be32(ports->ctl_base + SCC_CTL_MAEC0);
+
+ printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
+
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
+
+ out_be32(ports->dma_base + SCC_DMA_CMD,
+ in_be32(ports->dma_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ continue;
+ }
+
+ if (reg & INTSTS_RERR) {
+ printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
+
+ out_be32(ports->dma_base + SCC_DMA_CMD,
+ in_be32(ports->dma_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+ continue;
+ }
+
+ if (reg & INTSTS_ICERR) {
+ out_be32(ports->dma_base + SCC_DMA_CMD,
+ in_be32(ports->dma_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+
+ printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
+ continue;
+ }
+
+ if (reg & INTSTS_BMSINT) {
+ unsigned int classes;
+ printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_BMSINT);
+
+ /* TBD: SW reset */
+ scc_std_softreset(ap, &classes);
+ continue;
+ }
+
+ if (reg & INTSTS_BMHE) {
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_BMHE);
+ continue;
+ }
+
+ if (reg & INTSTS_ACTEINT) {
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_ACTEINT);
+ continue;
+ }
+
+ if (reg & INTSTS_IOIRQS) {
+ out_be32(ports->dma_base + SCC_DMA_INTST, INTSTS_IOIRQS);
+ continue;
+ }
+ break;
+ }
+
+ /* clear start/stop bit */
+ out_be32(ports->dma_base + SCC_DMA_CMD,
+ in_be32(ports->dma_base + SCC_DMA_CMD) & ~ATA_DMA_START);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_altstatus(ap); /* dummy read */
+ }
+
+ /**
+ * scc_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_status().
+ */
+
+ static u8 scc_bmdma_status (struct ata_port *ap)
+ {
+ u8 host_stat;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ host_stat = in_be32(mmio + SCC_DMA_STATUS);
+ return host_stat;
+ }
+
+ /**
+ * scc_data_xfer - Transfer data by MMIO
+ * @adev: device for this I/O
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @write_data: read/write
+ *
+ * Note: Original code is ata_mmio_data_xfer().
+ */
+
+ static void scc_data_xfer (struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
+ {
+ struct ata_port *ap = adev->ap;
+ unsigned int i;
+ unsigned int words = buflen >> 1;
+ u16 *buf16 = (u16 *) buf;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.data_addr;
+
+ /* Transfer multiple of 2 bytes */
+ if (write_data) {
+ for (i = 0; i < words; i++)
+ out_be32(mmio, cpu_to_le16(buf16[i]));
+ } else {
+ for (i = 0; i < words; i++)
+ buf16[i] = le16_to_cpu(in_be32(mmio));
+ }
+
+ /* Transfer trailing 1 byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ u16 align_buf[1] = { 0 };
+ unsigned char *trailing_buf = buf + buflen - 1;
+
+ if (write_data) {
+ memcpy(align_buf, trailing_buf, 1);
+ out_be32(mmio, cpu_to_le16(align_buf[0]));
+ } else {
+ align_buf[0] = le16_to_cpu(in_be32(mmio));
+ memcpy(trailing_buf, align_buf, 1);
+ }
+ }
+ }
+
+ /**
+ * scc_irq_on - Enable interrupts on a port.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Note: Original code is ata_irq_on().
+ */
+
+ static inline u8 scc_irq_on (struct ata_port *ap)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u8 tmp;
+
+ ap->ctl &= ~ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ out_be32((void __iomem *)ioaddr->ctl_addr, ap->ctl);
+ tmp = ata_wait_idle(ap);
+
+ ap->ops->irq_clear(ap);
+
+ return tmp;
+ }
+
+ /**
+ * scc_irq_ack - Acknowledge a device interrupt.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Note: Original code is ata_irq_ack().
+ */
+
+ static inline u8 scc_irq_ack (struct ata_port *ap, unsigned int chk_drq)
+ {
+ unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
+ u8 host_stat, post_stat, status;
+
+ status = ata_busy_wait(ap, bits, 1000);
+ if (status & bits)
+ if (ata_msg_err(ap))
+ printk(KERN_ERR "abnormal status 0x%X\n", status);
+
+ /* get controller status; clear intr, err bits */
+ host_stat = in_be32((void __iomem *)ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
+ out_be32((void __iomem *)ap->ioaddr.bmdma_addr + SCC_DMA_STATUS, host_stat | ATA_DMA_INTR | ATA_DMA_ERR);
+
+ post_stat = in_be32((void __iomem *)ap->ioaddr.bmdma_addr + SCC_DMA_STATUS);
+
+ if (ata_msg_intr(ap))
+ printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
+ __FUNCTION__,
+ host_stat, post_stat, status);
+
+ return status;
+ }
+
+ /**
+ * scc_hsm_qc_complete - finish a qc running on standard HSM
+ * @qc: Command to complete
+ * @in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ * Note: Original code is ata_hsm_qc_complete().
+ */
+
+ static void scc_hsm_qc_complete (struct ata_queued_cmd *qc, int in_wq)
+ {
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ if (ap->ops->error_handler) {
+ if (in_wq) {
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* EH might have kicked in while host_set lock
+ * is released.
+ */
+ qc = ata_qc_from_tag(ap, qc->tag);
+ if (qc) {
+ if (likely(!(qc->err_mask & AC_ERR_HSM))) {
+ scc_irq_on(ap);
+ ata_qc_complete(qc);
+ } else
+ ata_port_freeze(ap);
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ } else {
+ if (likely(!(qc->err_mask & AC_ERR_HSM)))
+ ata_qc_complete(qc);
+ else
+ ata_port_freeze(ap);
+ }
+ } else {
+ if (in_wq) {
+ spin_lock_irqsave(ap->lock, flags);
+ scc_irq_on(ap);
+ ata_qc_complete(qc);
+ spin_unlock_irqrestore(ap->lock, flags);
+ } else
+ ata_qc_complete(qc);
+ }
+
+ ata_altstatus(ap); /* flush */
+ }
+
+ /**
+ * scc_hsm_move - move the HSM to the next state.
+ * @ap: the target ata_port
+ * @qc: qc on going
+ * @status: current device status
+ * @in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ * Note: Original code is ata_hsm_move().
+ */
+
+ static int scc_hsm_move (struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq)
+ {
+ unsigned long flags = 0;
+ int poll_next;
+
+ WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
+
+ /* Make sure ata_qc_issue_prot() does not throw things
+ * like DMA polling into the workqueue. Notice that
+ * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
+ */
+ WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
+
+ fsm_start:
+ DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Send first data block or PACKET CDB */
+
+ /* If polling, we will stay in the work queue after
+ * sending the data. Otherwise, interrupt handler
+ * takes over after sending the data.
+ */
+ poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
+
+ /* check device status */
+ if (unlikely((status & ATA_DRQ) == 0)) {
+ /* handle BSY=0, DRQ=0 as error */
+ if (likely(status & (ATA_ERR | ATA_DF)))
+ /* device stops HSM for abort/error */
+ qc->err_mask |= AC_ERR_DEV;
+ else
+ /* HSM violation. Let EH handle this */
+ qc->err_mask |= AC_ERR_HSM;
+
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
+ ap->id, status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* Send the CDB (atapi) or the first data block (ata pio out).
+ * During the state transition, interrupt handler shouldn't
+ * be invoked before the data transfer is complete and
+ * hsm_task_state is changed. Hence, the following locking.
+ */
+ if (in_wq)
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (qc->tf.protocol == ATA_PROT_PIO) {
+ /* PIO data out protocol.
+ * send first data block.
+ */
+
+ /* ata_pio_sectors() might change the state
+ * to HSM_ST_LAST. so, the state is changed here
+ * before ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST;
+ ata_pio_sectors(qc);
+ ata_altstatus(ap); /* flush */
+ } else
+ /* send CDB */
+ atapi_send_cdb(ap, qc);
+
+ if (in_wq)
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* if polling, ata_pio_task() handles the rest.
+ * otherwise, interrupt handler takes over from here.
+ */
+ break;
+
+ case HSM_ST:
+ /* complete command or read/write the data register */
+ if (qc->tf.protocol == ATA_PROT_ATAPI) {
+ /* ATAPI PIO protocol */
+ if ((status & ATA_DRQ) == 0) {
+ /* No more data to transfer or device error.
+ * Device error will be tagged in HSM_ST_LAST.
+ */
+ ap->hsm_task_state = HSM_ST_LAST;
+ goto fsm_start;
+ }
+
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
+ ap->id, status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ atapi_pio_bytes(qc);
+
+ if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
+ /* bad ireason reported by device */
+ goto fsm_start;
+
+ } else {
+ /* ATA PIO protocol */
+ if (unlikely((status & ATA_DRQ) == 0)) {
+ /* handle BSY=0, DRQ=0 as error */
+ if (likely(status & (ATA_ERR | ATA_DF)))
+ /* device stops HSM for abort/error */
+ qc->err_mask |= AC_ERR_DEV;
+ else
+ /* HSM violation. Let EH handle this */
+ qc->err_mask |= AC_ERR_HSM;
+
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* For PIO reads, some devices may ask for
+ * data transfer (DRQ=1) alone with ERR=1.
+ * We respect DRQ here and transfer one
+ * block of junk data before changing the
+ * hsm_task_state to HSM_ST_ERR.
+ *
+ * For PIO writes, ERR=1 DRQ=1 doesn't make
+ * sense since the data block has been
+ * transferred to the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ /* data might be corrputed */
+ qc->err_mask |= AC_ERR_DEV;
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ ata_pio_sectors(qc);
+ ata_altstatus(ap);
+ status = ata_wait_idle(ap);
+ }
+
+ if (status & (ATA_BUSY | ATA_DRQ))
+ qc->err_mask |= AC_ERR_HSM;
+
+ /* ata_pio_sectors() might change the
+ * state to HSM_ST_LAST. so, the state
+ * is changed after ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ ata_pio_sectors(qc);
+
+ if (ap->hsm_task_state == HSM_ST_LAST &&
+ (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
+ /* all data read */
+ ata_altstatus(ap);
+ status = ata_wait_idle(ap);
+ goto fsm_start;
+ }
+ }
+
+ ata_altstatus(ap); /* flush */
+ poll_next = 1;
+ break;
+
+ case HSM_ST_LAST:
+ if (unlikely(!ata_ok(status))) {
+ qc->err_mask |= __ac_err_mask(status);
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* no more data to transfer */
+ DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
+ ap->id, qc->dev->devno, status);
+
+ WARN_ON(qc->err_mask);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ /* complete taskfile transaction */
+ scc_hsm_qc_complete(qc, in_wq);
+
+ poll_next = 0;
+ break;
+
+ case HSM_ST_ERR:
+ /* make sure qc->err_mask is available to
+ * know what's wrong and recover
+ */
+ WARN_ON(qc->err_mask == 0);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ /* complete taskfile transaction */
+ scc_hsm_qc_complete(qc, in_wq);
+
+ poll_next = 0;
+ break;
+ default:
+ poll_next = 0;
+ BUG();
+ }
+
+ return poll_next;
+ }
+
+ /**
+ * scc_pio_task - queue task
+ * Note: Original code is ata_pio_task().
+ */
+
+ static void scc_pio_task(void *_data)
+ {
+ struct ata_queued_cmd *qc = _data;
+ struct ata_port *ap = qc->ap;
+ u8 status;
+ int poll_next;
+
+ fsm_start:
+ WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
+
+ /*
+ * This is purely heuristic. This is a fast path.
+ * Sometimes when we enter, BSY will be cleared in
+ * a chk-status or two. If not, the drive is probably seeking
+ * or something. Snooze for a couple msecs, then
+ * chk-status again. If still busy, queue delayed work.
+ */
+ status = ata_busy_wait(ap, ATA_BUSY, 5);
+ if (status & ATA_BUSY) {
+ msleep(2);
+ status = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (status & ATA_BUSY) {
+ ata_port_queue_task(ap, scc_pio_task, qc, ATA_SHORT_PAUSE);
+ return;
+ }
+ }
+
+ /* move the HSM */
+ poll_next = scc_hsm_move(ap, qc, status, 1);
+
+ /* another command or interrupt handler
+ * may be running at this point.
+ */
+ if (poll_next)
+ goto fsm_start;
+ }
+
+ /**
+ * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
+ * @qc: command to issue to device
+ *
+ * Note: Original code is ata_mmio_data_xfer().
+ */
+
+ static unsigned int scc_qc_issue_prot (struct ata_queued_cmd *qc)
+ {
+ struct ata_port *ap = qc->ap;
+
+ /* Use polling pio if the LLD doesn't handle
+ * interrupt driven pio and atapi CDB interrupt.
+ */
+ if (ap->flags & ATA_FLAG_PIO_POLLING) {
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_NODATA:
+ qc->tf.flags |= ATA_TFLAG_POLLING;
+ break;
+ case ATA_PROT_ATAPI_DMA:
+ if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
+ /* see ata_dma_blacklisted() */
+ BUG();
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* select the device */
+ ata_dev_select(ap, qc->dev->devno, 1, 0);
+
+ /* start the command */
+ switch (qc->tf.protocol) {
+ case ATA_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
+ ata_tf_to_host(ap, &qc->tf);
+ ap->hsm_task_state = HSM_ST_LAST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_port_queue_task(ap, scc_pio_task, qc, 0);
+
+ break;
+
+ case ATA_PROT_DMA:
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->ops->bmdma_start(qc); /* initiate bmdma */
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+
+ case ATA_PROT_PIO:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
+ ata_tf_to_host(ap, &qc->tf);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ /* PIO data out protocol */
+ ap->hsm_task_state = HSM_ST_FIRST;
+ ata_port_queue_task(ap, scc_pio_task, qc, 0);
+
+ /* always send first data block using
+ * the ata_pio_task() codepath.
+ */
+ } else {
+ /* PIO data in protocol */
+ ap->hsm_task_state = HSM_ST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_port_queue_task(ap, scc_pio_task, qc, 0);
+
+ /* if polling, ata_pio_task() handles the rest.
+ * otherwise, interrupt handler takes over from here.
+ */
+ }
+
+ break;
+
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
+ ata_tf_to_host(ap, &qc->tf);
+
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
+ (qc->tf.flags & ATA_TFLAG_POLLING))
+ ata_port_queue_task(ap, scc_pio_task, qc, 0);
+ break;
+
+ case ATA_PROT_ATAPI_DMA:
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ ata_port_queue_task(ap, scc_pio_task, qc, 0);
+ break;
+
+ default:
+ WARN_ON(1);
+ return AC_ERR_SYSTEM;
+ }
+
+ return 0;
+ }
+
+ /**
+ * scc_bmdma_freeze - Freeze BMDMA controller port
+ * @ap: port to freeze
+ *
+ * Note: Original code is ata_bmdma_freeze().
+ */
+
+ static void scc_bmdma_freeze (struct ata_port *ap)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ ap->ctl |= ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ out_be32((void __iomem *)ioaddr->ctl_addr, ap->ctl);
+ }
+
+ /**
+ * scc_bmdma_thaw - Thaw BMDMA controller port
+ * @ap: port to thaw
+ *
+ * Note: Original code is ata_bmdma_thaw().
+ */
+
+ static void scc_bmdma_thaw (struct ata_port *ap)
+ {
+ /* clear & re-enable interrupts */
+ ata_chk_status(ap);
+ ap->ops->irq_clear(ap);
+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
+ scc_irq_on(ap);
+ }
+
+ /**
+ * scc_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
+ * @ap: port to handle error for
+ * @prereset: prereset method (can be NULL)
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ *
+ * Note: Original code is ata_bmdma_drive_eh().
+ */
+
+ static void scc_bmdma_drive_eh (struct ata_port *ap, ata_prereset_fn_t prereset,
+ ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset)
+ {
+ struct ata_eh_context *ehc = &ap->eh_context;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int thaw = 0;
+
+ qc = __ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(ap->lock, flags);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
+ u8 host_stat;
+
+ host_stat = scc_bmdma_status(ap);
+
+ ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = 1;
+ }
+
+ ap->ops->bmdma_stop(qc);
+ }
+
+ ata_altstatus(ap);
+ ata_chk_status(ap);
+ ap->ops->irq_clear(ap);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ /* PIO and DMA engines have been stopped, perform recovery */
+ ata_do_eh(ap, prereset, softreset, hardreset, postreset);
+ }
+
+ /**
+ * scc_devchk - PATA device presence detection
+ * @ap: ATA channel to examine
+ * @device: Device to examine (starting at zero)
+ *
+ * Note: Original code is ata_pio_devchk().
+ */
+
+ static unsigned int scc_devchk (struct ata_port *ap,
+ unsigned int device)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u8 nsect, lbal;
+
+ ap->ops->dev_select(ap, device);
+
+ out_be32((void __iomem *)ioaddr->nsect_addr, 0x55);
+ out_be32((void __iomem *)ioaddr->lbal_addr, 0xaa);
+
+ out_be32((void __iomem *)ioaddr->nsect_addr, 0xaa);
+ out_be32((void __iomem *)ioaddr->lbal_addr, 0x55);
+
+ out_be32((void __iomem *)ioaddr->nsect_addr, 0x55);
+ out_be32((void __iomem *)ioaddr->lbal_addr, 0xaa);
+
+ nsect = in_be32((void __iomem *)ioaddr->nsect_addr);
+ lbal = in_be32((void __iomem *)ioaddr->lbal_addr);
+
+ if ((nsect == 0x55) && (lbal == 0xaa))
+ return 1; /* we found a device */
+
+ return 0; /* nothing found */
+ }
+
+ /**
+ * scc_bus_post_reset - PATA device post reset
+ *
+ * Note: Original code is ata_bus_post_reset().
+ */
+ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int dev0 = devmask & (1 << 0);
+ unsigned int dev1 = devmask & (1 << 1);
+ unsigned long timeout;
+
+ /* if device 0 was found in ata_devchk, wait for its
+ * BSY bit to clear
+ */
+ if (dev0)
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ /* if device 1 was found in ata_devchk, wait for
+ * register access, then wait for BSY to clear
+ */
+ timeout = jiffies + ATA_TMOUT_BOOT;
+ while (dev1) {
+ u8 nsect, lbal;
+
+ ap->ops->dev_select(ap, 1);
+ nsect = in_be32((void __iomem *)ioaddr->nsect_addr);
+ lbal = in_be32((void __iomem *)ioaddr->lbal_addr);
+ if ((nsect == 1) && (lbal == 1))
+ break;
+ if (time_after(jiffies, timeout)) {
+ dev1 = 0;
+ break;
+ }
+ msleep(50); /* give drive a breather */
+ }
+ if (dev1)
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ /* is all this really necessary? */
+ ap->ops->dev_select(ap, 0);
+ if (dev1)
+ ap->ops->dev_select(ap, 1);
+ if (dev0)
+ ap->ops->dev_select(ap, 0);
+ }
+
+ /**
+ * scc_bus_softreset - PATA device software reset
+ *
+ * Note: Original code is ata_bus_softreset().
+ */
+ static unsigned int scc_bus_softreset (struct ata_port *ap,
+ unsigned int devmask)
+ {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ DPRINTK("ata%u: bus reset via SRST\n", ap->id);
+
+ /* software reset. causes dev0 to be selected */
+ out_be32((void __iomem *)ioaddr->ctl_addr, ap->ctl);
+ udelay(10);
+ out_be32((void __iomem *)ioaddr->ctl_addr, ap->ctl | ATA_SRST);
+ udelay(10);
+ out_be32((void __iomem *)ioaddr->ctl_addr, ap->ctl);
+
+ /* spec mandates ">= 2ms" before checking status.
+ * We wait 150ms, because that was the magic delay used for
+ * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready
+ */
+ msleep(150);
+
+ /* Before we perform post reset processing we want to see if
+ * the bus shows 0xFF because the odd clown forgets the D7
+ * pulldown resistor.
+ */
+ if (scc_check_status(ap) == 0xFF) {
+ ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n");
+ return AC_ERR_OTHER;
+ }
+
+ scc_bus_post_reset(ap, devmask);
+
+ return 0;
+ }
+
+ /**
+ * scc_std_softreset - reset host port via ATA SRST
+ * @ap: port to reset
+ * @classes: resulting classes of attached devices
+ *
+ * Note: Original code is ata_std_softreset().
+ */
+
+ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
+ {
+ unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+ unsigned int devmask = 0, err_mask;
+ u8 err;
+
+ DPRINTK("ENTER\n");
+
+ if (ata_port_offline(ap)) {
+ classes[0] = ATA_DEV_NONE;
+ goto out;
+ }
+
+ /* determine if device 0/1 are present */
+ if (scc_devchk(ap, 0))
+ devmask |= (1 << 0);
+ if (slave_possible && scc_devchk(ap, 1))
+ devmask |= (1 << 1);
+
+ /* select device 0 again */
+ ap->ops->dev_select(ap, 0);
+
+ /* issue bus reset */
+ DPRINTK("about to softreset, devmask=%x\n", devmask);
+ err_mask = scc_bus_softreset(ap, devmask);
+ if (err_mask) {
+ ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
+ err_mask);
+ return -EIO;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ classes[0] = ata_dev_try_classify(ap, 0, &err);
+ if (slave_possible && err != 0x81)
+ classes[1] = ata_dev_try_classify(ap, 1, &err);
+
+ out:
+ DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+ return 0;
+ }
+
+ /**
+ * scc_std_postreset - standard postreset callback
+ * @ap: the target ata_port
+ * @classes: classes of attached devices
+ *
+ * Note: Original code is ata_std_postreset().
+ */
+
+ static void scc_std_postreset (struct ata_port *ap, unsigned int *classes)
+ {
+ DPRINTK("ENTER\n");
+
+ /* re-enable interrupts */
+ if (!ap->ops->error_handler) {
+ /* FIXME: hack. create a hook instead */
+ if (ap->ioaddr.ctl_addr)
+ scc_irq_on(ap);
+ }
+
+ /* is double-select really necessary? */
+ if (classes[0] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 1);
+ if (classes[1] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 0);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
+ }
+
+ /* set up device control */
+ if (ap->ioaddr.ctl_addr)
+ out_be32((void __iomem *) ap->ioaddr.ctl_addr, ap->ctl);
+
+ DPRINTK("EXIT\n");
+ }
+
+ /**
+ * scc_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Note: Original code is ata_bmdma_error_handler().
+ */
+
+ static void scc_error_handler (struct ata_port *ap)
+ {
+ scc_bmdma_drive_eh(ap, ata_std_prereset, scc_std_softreset, NULL,
+ scc_std_postreset);
+ }
+
+ /**
+ * scc_host_intr - Handle host interrupt for given (port, task)
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
+ *
+ * Note: Original code is ata_host_intr().
+ */
+
+ static inline unsigned int scc_host_intr (struct ata_port *ap,
+ struct ata_queued_cmd *qc)
+ {
+ u8 status, host_stat = 0;
+
+ VPRINTK("ata%u: protocol %d task_state %d\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state);
+
+ /* Check whether we are expecting interrupt in this state */
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Some pre-ATAPI-4 devices assert INTRQ
+ * at this state when ready to receive CDB.
+ */
+
+ /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+ * The flag was turned on only for atapi devices.
+ * No need to check is_atapi_taskfile(&qc->tf) again.
+ */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ goto idle_irq;
+ break;
+ case HSM_ST_LAST:
+ if (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ /* check status of DMA engine */
+ host_stat = ap->ops->bmdma_status(ap);
+ VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+
+ if (unlikely(host_stat & ATA_DMA_ERR)) {
+ /* error when transfering data to/from memory */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+ break;
+ case HSM_ST:
+ break;
+ default:
+ goto idle_irq;
+ }
+
+ /* check altstatus */
+ status = ata_altstatus(ap);
+ if (status & ATA_BUSY)
+ goto idle_irq;
+
+ /* check main status, clearing INTRQ */
+ status = ata_chk_status(ap);
+ if (unlikely(status & ATA_BUSY))
+ goto idle_irq;
+
+ /* ack bmdma irq events */
+ ap->ops->irq_clear(ap);
+
+ scc_hsm_move(ap, qc, status, 0);
+ return 1; /* irq handled */
+
+ idle_irq:
+ ap->stats.idle_irq++;
+
+ #ifdef ATA_IRQ_TRAP
+ if ((ap->stats.idle_irq % 1000) == 0) {
+ scc_irq_ack(ap, 0); /* debug trap */
+ ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ return 1;
+ }
+ #endif
+
+ return 0; /* irq not handled */
+ }
+
+ /**
+ * scc_interrupt - ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host_set information structure
+ *
+ * Note: Original code is ata_interrupt().
+ */
+
+ static irqreturn_t scc_interrupt (int irq, void *dev_instance)
+ {
+ struct ata_host *host = dev_instance;
+ unsigned int i;
+ unsigned int handled = 0;
+ unsigned long flags;
+
+ /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
+ spin_lock_irqsave(&host->lock, flags);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ ap = host->ports[i];
+ if (ap &&
+ !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE))
+ handled |= scc_host_intr(ap, qc);
+ }
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_RETVAL(handled);
+ }
+
+ /**
+ * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Note: Original code is ata_bmdma_irq_clear().
+ */
+
+ static void scc_bmdma_irq_clear (struct ata_port *ap)
+ {
+ void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + SCC_DMA_STATUS;
+ if (!ap->ioaddr.bmdma_addr)
+ return;
+
+ out_be32(mmio, in_be32(mmio));
+ }
+
+ /**
+ * scc_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Allocate space for PRD table using ata_port_start().
+ * Set PRD table address for PTERADD. (PRD Transfer End Read)
+ */
+
+ static int scc_port_start (struct ata_port *ap)
+ {
+ struct scc_ports *ports = (struct scc_ports *) ap->host->private_data;
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+
+ out_be32(ports->dma_base + SCC_DMA_PTERADD, ap->prd_dma);
+ return 0;
+ }
+
+ /**
+ * scc_port_stop - Undo scc_port_start()
+ * @ap: Port to shut down
+ *
+ * Reset PTERADD and Free the PRD table.
+ */
+
+ static void scc_port_stop (struct ata_port *ap)
+ {
+ struct scc_ports *ports = (struct scc_ports *) ap->host->private_data;
+
+ out_be32(ports->dma_base + SCC_DMA_PTERADD, 0);
+ ata_port_stop(ap);
+ }
+
+ /**
+ * remove_mmio_scc - Free the private data
+ * @pdev: pci_dev to shut down
+ */
+
+ static void remove_mmio_scc(struct pci_dev *pdev)
+ {
+ struct scc_ports *ports = pci_get_drvdata(pdev);
+ unsigned long ctl_addr = pci_resource_start(pdev, 0);
+ unsigned long dma_addr = pci_resource_start(pdev, 1);
+ unsigned long ctl_size = pci_resource_len(pdev, 0);
+ unsigned long dma_size = pci_resource_len(pdev, 1);
+
+ pci_set_drvdata(pdev, NULL);
+ iounmap(ports->dma_base);
+ iounmap(ports->ctl_base);
+ release_mem_region(dma_addr, dma_size);
+ release_mem_region(ctl_addr, ctl_size);
+ }
+
+ static void scc_host_stop (struct ata_host *host)
+ {
+ struct scc_ports *ports = host->private_data;
+
+ ata_host_stop(host);
+ remove_mmio_scc(to_pci_dev(host->dev));
+ kfree(ports);
+ }
+
+
+ /**
+ * scc_std_ports - initialize ioaddr with SCC PATA port offsets.
+ * @ioaddr: IO address structure to be initialized
+ *
+ * Note: Original code is ata_std_ports().
+ */
+
+ static void scc_std_ports (struct ata_ioports *ioaddr)
+ {
+ ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
+ ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
+ ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
+ ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
+ ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
+ ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
+ ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
+ ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
+ ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
+ ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
+ }
+
+ /**
+ * scc_pci_init_native_mode - Initialize native-mode driver
+ * @pdev: pci device to be initialized
+ * @port: array[2] of pointers to port info structures.
+ * @ports: bitmap of ports present
+ *
+ * Note: Original code is ata_pci_init_native_mode().
+ */
+
+ static struct ata_probe_ent *
+ scc_pci_init_native_mode (struct pci_dev *pdev, struct ata_port_info **port, int ports)
+ {
+ struct ata_probe_ent *probe_ent =
+ ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ int p = 0;
+ unsigned long bmdma;
+ struct scc_ports *scc_port = pci_get_drvdata(pdev);
+
+ if (!probe_ent)
+ return NULL;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = IRQF_SHARED;
+ probe_ent->private_data = port[0]->private_data;
+
+ if (ports & ATA_PORT_PRIMARY) {
+ probe_ent->port[p].cmd_addr = (unsigned long)(scc_port->dma_base + SCC_REG_CMD_ADDR);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ probe_ent->port[p].cmd_addr + SCC_REG_ALTSTATUS;
+ bmdma = (unsigned long)scc_port->dma_base;
+ if (bmdma) {
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
+ scc_std_ports(&probe_ent->port[p]);
+ p++;
+ }
+
+ probe_ent->n_ports = p;
+ return probe_ent;
+ }
+
+ /**
+ * scc_pci_init_one - Initialize/register PCI IDE host controller
+ * @pdev: Controller to be initialized
+ * @port_info: Information from low-level host driver
+ * @n_ports: Number of ports attached to host controller
+ *
+ * Note: Original code is ata_pci_init_one().
+ */
+
+ static int scc_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
+ unsigned int n_ports)
+ {
+ struct ata_probe_ent *probe_ent = NULL;
+ struct ata_port_info *port[2];
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ BUG_ON(n_ports < 1 || n_ports > 2);
+
+ port[0] = port_info[0];
+ if (n_ports > 1)
+ port[1] = port_info[1];
+ else
+ port[1] = port[0];
+
+ /* FIXME: Really for ATA it isn't safe because the device may be
+ multi-purpose and we want to leave it alone if it was already
+ enabled. Secondly for shared use as Arjan says we want refcounting
+
+ Checking dev->is_enabled is insufficient as this is not set at
+ boot for the primary video which is BIOS enabled
+ */
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* TODO: If we get no DMA mask we should fall back to PIO */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out;
+
+ if (n_ports == 2)
+ probe_ent = scc_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else
+ probe_ent = scc_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+
+ if (!probe_ent) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ pci_set_master(pdev);
+
+ if (!ata_device_add(probe_ent)) {
+ rc = -ENODEV;
+ goto err_out_ent;
+ }
+
+ kfree(probe_ent);
+
+ return 0;
+
+ err_out_ent:
+ kfree(probe_ent);
+ err_out:
+ pci_disable_device(pdev);
+ return rc;
+ }
+
+ /**
+ * setup_mmio_scc - map CTRL/BMID region
+ * @pdev: PCI device we are configuring
+ * @name: device name
+ */
+
+ static int setup_mmio_scc (struct pci_dev *pdev, const char *name)
+ {
+ unsigned long ctl_addr = pci_resource_start(pdev, 0);
+ unsigned long dma_addr = pci_resource_start(pdev, 1);
+ unsigned long ctl_size = pci_resource_len(pdev, 0);
+ unsigned long dma_size = pci_resource_len(pdev, 1);
+ struct scc_ports *scc_port;
+ void __iomem *ctl_base, *dma_base;
+
+ scc_port = (struct scc_ports*)kzalloc(sizeof(struct scc_ports), GFP_KERNEL);
+ if (!scc_port)
+ return -ENOMEM;
+
+ if (!request_mem_region(ctl_addr, ctl_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not availabl\
+ e.\n", DRV_NAME);
+ goto fail_0;
+ }
+
+ if (!request_mem_region(dma_addr, dma_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not availabl\
+ e.\n", DRV_NAME);
+ goto fail_1;
+ }
+
+ if ((ctl_base = ioremap(ctl_addr, ctl_size)) == NULL)
+ goto fail_2;
+
+ if ((dma_base = ioremap(dma_addr, dma_size)) == NULL)
+ goto fail_3;
+ pci_set_master(pdev);
+ scc_port->ctl_base = ctl_base;
+ scc_port->dma_base = dma_base;
+ pci_set_drvdata(pdev, (void *)scc_port);
+
+ return 0;
+
+ fail_3:
+ iounmap(ctl_base);
+ fail_2:
+ release_mem_region(dma_addr, dma_size);
+ fail_1:
+ release_mem_region(ctl_addr, ctl_size);
+ fail_0:
+ kfree(scc_port);
+ return -ENOMEM;
+ }
+
+ /**
+ * scc_init_one - Register SCC PATA device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in scc_pci_tbl matching with @pdev
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+ {
+ static int printed_version;
+ struct ata_port_info port_info[2];
+ struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] };
+ struct scc_ports *ports;
+ unsigned long port_flags;
+ int rc;
+ void __iomem *cckctrl_port, *intmask_port, *mode_port, *ecmode_port;
+ u32 reg = 0;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ rc = setup_mmio_scc(pdev, DRV_NAME);
+ if (rc < 0)
+ return rc;
+
+ ports = pci_get_drvdata(pdev);
+ cckctrl_port = ports->ctl_base + SCC_CTL_CCKCTRL;
+ mode_port = ports->ctl_base + SCC_CTL_MODEREG;
+ ecmode_port = ports->ctl_base + SCC_CTL_ECMODE;
+ intmask_port = ports->dma_base + SCC_DMA_INTMASK;
+
+ /* controller initialization */
+ reg = 0;
+ out_be32(cckctrl_port, reg);
+ reg |= CCKCTRL_ATACLKOEN;
+ out_be32(cckctrl_port, reg);
+ reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+ out_be32(cckctrl_port, reg);
+ reg |= CCKCTRL_CRST;
+ out_be32(cckctrl_port, reg);
+
+ for (;;) {
+ reg = in_be32(cckctrl_port);
+ if (reg & CCKCTRL_CRST)
+ break;
+ udelay(5000);
+ }
+
+ reg |= CCKCTRL_ATARESET;
+ out_be32(cckctrl_port, reg);
+
+ out_be32(ecmode_port, ECMODE_VALUE);
+ out_be32(mode_port, MODE_JCUSFEN);
+ out_be32(intmask_port, INTMASK_MSK);
+
+ if (in_be32(ports->dma_base + SCC_DMA_STATUS) & QCHSD_STPDIAG) {
+ printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
+ remove_mmio_scc(pdev);
+ kfree(ports);
+ return -EIO;
+ }
+
+ port_info[0] = scc_port_info[ent->driver_data];
+ port_info[1] = scc_port_info[ent->driver_data];
+ port_info[0].private_data = ports;
+ port_info[1].private_data = ports;
+
+ port_flags = port_info[0].flags;
+
+ return scc_pci_init_one(pdev, ppinfo, 1); /* n_ports must be 1 */
+ }
+
+ static int __init scc_init (void)
+ {
+ int rc;
+
+ DPRINTK("pci_register_driver\n");
+ rc = pci_register_driver(&scc_pci_driver);
+ if (rc)
+ return rc;
+
+ DPRINTK("done\n");
+ return 0;
+ }
+
+ static void __exit scc_exit (void)
+ {
+ pci_unregister_driver(&scc_pci_driver);
+ }
+
+ module_init(scc_init);
+ module_exit(scc_exit);
Index: linux-2.6.19/drivers/ata/libata-core.c
diff -c linux-2.6.19/drivers/ata/libata-core.c:1.1.1.4 linux-2.6.19/drivers/ata/libata-core.c:1.4
*** linux-2.6.19/drivers/ata/libata-core.c:1.1.1.4 Fri Dec 1 13:45:53 2006
--- linux-2.6.19/drivers/ata/libata-core.c Wed Dec 6 12:00:47 2006
***************
*** 600,606 ****
* Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
*/
! static unsigned int
ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
{
struct ata_taskfile tf;
--- 600,606 ----
* Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
*/
! unsigned int
ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
{
struct ata_taskfile tf;
***************
*** 2297,2322 ****
}
/**
- * ata_tf_to_host - issue ATA taskfile to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues ATA taskfile register set to ATA host controller,
- * with proper synchronization with interrupt handler and
- * other threads.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-
- static inline void ata_tf_to_host(struct ata_port *ap,
- const struct ata_taskfile *tf)
- {
- ap->ops->tf_load(ap, tf);
- ap->ops->exec_command(ap, tf);
- }
-
- /**
* ata_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout
--- 2297,2302 ----
***************
*** 3787,3793 ****
* Inherited from caller.
*/
! static void ata_pio_sectors(struct ata_queued_cmd *qc)
{
if (is_multi_taskfile(&qc->tf)) {
/* READ/WRITE MULTIPLE */
--- 3767,3773 ----
* Inherited from caller.
*/
! void ata_pio_sectors(struct ata_queued_cmd *qc)
{
if (is_multi_taskfile(&qc->tf)) {
/* READ/WRITE MULTIPLE */
***************
*** 3814,3820 ****
* caller.
*/
! static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
{
/* send SCSI cdb */
DPRINTK("send cdb\n");
--- 3794,3800 ----
* caller.
*/
! void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
{
/* send SCSI cdb */
DPRINTK("send cdb\n");
***************
*** 3943,3949 ****
* Inherited from caller.
*/
! static void atapi_pio_bytes(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *dev = qc->dev;
--- 3923,3929 ----
* Inherited from caller.
*/
! void atapi_pio_bytes(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *dev = qc->dev;
***************
*** 3984,4016 ****
}
/**
- * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
- * @ap: the target ata_port
- * @qc: qc on going
- *
- * RETURNS:
- * 1 if ok in workqueue, 0 otherwise.
- */
-
- static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
- {
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- return 1;
-
- if (ap->hsm_task_state == HSM_ST_FIRST) {
- if (qc->tf.protocol == ATA_PROT_PIO &&
- (qc->tf.flags & ATA_TFLAG_WRITE))
- return 1;
-
- if (is_atapi_taskfile(&qc->tf) &&
- !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- return 1;
- }
-
- return 0;
- }
-
- /**
* ata_hsm_qc_complete - finish a qc running on standard HSM
* @qc: Command to complete
* @in_wq: 1 if called from workqueue, 0 otherwise
--- 3964,3969 ----
***************
*** 6122,6127 ****
--- 6075,6081 ----
EXPORT_SYMBOL_GPL(ata_std_softreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
+ EXPORT_SYMBOL_GPL(ata_dev_revalidate);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
EXPORT_SYMBOL_GPL(ata_port_disable);
***************
*** 6178,6180 ****
--- 6132,6141 ----
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_do_eh);
+
+ EXPORT_SYMBOL_GPL(ata_dev_try_classify);
+ EXPORT_SYMBOL_GPL(ata_pio_sectors);
+ EXPORT_SYMBOL_GPL(atapi_send_cdb);
+ EXPORT_SYMBOL_GPL(atapi_pio_bytes);
+ EXPORT_SYMBOL_GPL(ata_dev_select);
+ EXPORT_SYMBOL_GPL(ata_probe_ent_alloc);
Index: linux-2.6.19/include/linux/libata.h
diff -c linux-2.6.19/include/linux/libata.h:1.1.1.4 linux-2.6.19/include/linux/libata.h:1.2
*** linux-2.6.19/include/linux/libata.h:1.1.1.4 Tue Nov 14 11:16:27 2006
--- linux-2.6.19/include/linux/libata.h Wed Dec 6 09:37:13 2006
***************
*** 752,757 ****
--- 752,764 ----
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
unsigned long timeout_msec);
+ extern void ata_dev_select (struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep);
+ extern unsigned int ata_dev_try_classify (struct ata_port *ap, unsigned int device, u8 *r_err);
+ extern void ata_pio_sectors (struct ata_queued_cmd *qc);
+ extern void atapi_send_cdb (struct ata_port *ap, struct ata_queued_cmd *qc);
+ extern void atapi_pio_bytes (struct ata_queued_cmd *qc);
+ extern struct ata_probe_ent *ata_probe_ent_alloc (struct device *dev, const struct ata_port_info *port);
+
/*
* Default driver ops implementations
***************
*** 762,767 ****
--- 769,775 ----
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device);
extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
+ extern void ata_dev_select (struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep);
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
***************
*** 1265,1268 ****
--- 1273,1323 ----
return (struct ata_port *) &host->hostdata[0];
}
+ /**
+ * ata_tf_to_host - issue ATA taskfile to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues ATA taskfile register set to ATA host controller,
+ * with proper synchronization with interrupt handler and
+ * other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+ static inline void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+ {
+ ap->ops->tf_load(ap, tf);
+ ap->ops->exec_command(ap, tf);
+ }
+
+ /**
+ * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
+ * @ap: the target ata_port
+ * @qc: qc on going
+ *
+ * RETURNS:
+ * 1 if ok in workqueue, 0 otherwise.
+ */
+
+ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
+ {
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return 1;
+
+ if (ap->hsm_task_state == HSM_ST_FIRST) {
+ if (qc->tf.protocol == ATA_PROT_PIO &&
+ (qc->tf.flags & ATA_TFLAG_WRITE))
+ return 1;
+
+ if (is_atapi_taskfile(&qc->tf) &&
+ !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ return 1;
+ }
+
+ return 0;
+ }
+
#endif /* __LINUX_LIBATA_H__ */
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
