Linux IDE Archive

• Thread Index

• [PATCH] ahci: fix endianness in spurious interrupt message
  • From: Tejun Heo
• Re: Failed to set xfermode on LITE-ON LTR-40125S
  • From: Albert Lee
• Re: [PATCH] RESPIN: libata: add atapi_passthru=1 parameter
  • From: Mark Lord
• Re: [PATCH] remove duplicate ids from ata_piix
  • From: Jeff Garzik
• [PATCH] remove duplicate ids from ata_piix
  • From: Greg KH
• Re: ahci: improve and limit spurious interrupt messages, take#3
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] libata-sff: Don't call bmdma_stop on non DMA capable controllers
  • From: Jeff Garzik
• Re: [PATCH] libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli
  • From: Jeff Garzik
• Re: ahci: improve and limit spurious interrupt messages, take#3
  • From: Jeff Garzik
• Re: [PATCH] sata_via: don't diddle with ATA_NIEN in ->freeze
  • From: Jeff Garzik
• Updated SiI h/w docs (was Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks)
  • From: Jeff Garzik
• Failed to set xfermode on LITE-ON LTR-40125S
  • From: John Williams
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] ide: clear bmdma status in ide_intr() (revised)
  • From: Sergei Shtylyov
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] ide: clear bmdma status in ide_intr() (revised)
  • From: Sergei Shtylyov
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Sergei Shtylyov
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Alan
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Tejun Heo
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Sergei Shtylyov
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Alan
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Tejun Heo
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Jeff Garzik
• Re: Linux 2.6 SATA NCQ support
  • From: Jeff Garzik
• Re: Linux 2.6 SATA NCQ support
  • From: Tejun Heo
• Re: [PATCH] sata_via: don't diddle with ATA_NIEN in ->freeze
  • From: Alan
• Re: [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Alan
• Re: Linux 2.6 SATA NCQ support
  • From: Tejun Heo
• [PATCH] sata_via: don't diddle with ATA_NIEN in ->freeze
  • From: Tejun Heo
• [PATCH] libata: share PIO limits among devices sharing a channel
  • From: Tejun Heo
• [PATCH] libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli
  • From: Tejun Heo
• ahci: improve and limit spurious interrupt messages, take#3
  • From: Tejun Heo
• [PATCH 2/2] ide: clear bmdma status in ide_intr() (revised)
  • From: Albert Lee
• Re: [PATCH] ahci: improve and limit spurious interrupt messages, take#2
  • From: Tejun Heo
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Jeff Garzik
• Re: Reg. SATA II NCQ
  • From: Jaychander T
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Mark Lord
• Re: [PATCH] driver/ata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ahci: improve and limit spurious interrupt messages, take#2
  • From: Jeff Garzik
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Jeff Garzik
• Re: [PATCH] driver/ata: PATA driver for Celleb
  • From: Jeff Garzik
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata.h: add another IRQ calls
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Brian King
• Re: What's in libata-dev.git
  • From: Jeff Garzik
• Re: What's in libata-dev.git
  • From: Mark Lord
• Re: 2.6.20-rc5: known unfixed regressions (v3) (part 2)
  • From: Lennart Sorensen
• 2.6.20-rc5: known regressions with patches (v3)
  • From: Adrian Bunk
• 2.6.20-rc5: known unfixed regressions (v3) (part 2)
  • From: Adrian Bunk
• Re: Possible performance issue with sata_sil og Gigabyte i-Ram
  • From: Oddbjørn Kvalsund
• Re: [PATCH 2/2] ide: clear bmdma status in ide_intr()
  • From: Sergei Shtylyov
• Re: Possible performance issue with sata_sil og Gigabyte i-Ram
  • From: Oddbjørn Kvalsund
• What's in libata-dev.git
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] ahci: make ULi M5288 ignore interface fatal error bit
  • From: Jeff Garzik
• [PATCH 2/2] ide: clear bmdma status in ide_intr()
  • From: Albert Lee
• [PATCH 1/2] ide: remove clearing bmdma status from cdrom_decode_status()
  • From: Albert Lee
• [PATCH 0/2] ide: clear bmdma status in ide_intr for all commands
  • From: Albert Lee
• More ATA docs uploaded
  • From: Jeff Garzik
• Re: Possible performance issue with sata_sil og Gigabyte i-Ram
  • From: Jeff Garzik
• Re: Possible performance issue with sata_sil og Gigabyte i-Ram
  • From: Alan
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: danieljzhang
• Re: Possible performance issue with sata_sil og Gigabyte i-Ram
  • From: Jeff Garzik
• Possible performance issue with sata_sil og Gigabyte i-Ram
  • From: Oddbjørn Kvalsund
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Sergei Shtylyov
• Re: PATA ATAPI detection debug
  • From: Art Haas
• Re: problem with register_hw_with_fixup
  • From: Alan
• problem with register_hw_with_fixup
  • From: Stefan Althoefer
• Re: PATA ATAPI detection debug
  • From: Tejun Heo
• [PATCH] ahci: make ULi M5288 ignore interface fatal error bit
  • From: Tejun Heo
• Re: ICH6-M libata disk timeouts in 2.6.19 (except with small queue depth)
  • From: Mark Lord
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Jeff Garzik
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Alan
• Re: [PATCH 2/3] libata: Initialize nbytes for internal sg commands
  • From: Brian King
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Sergei Shtylyov
• Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
  • From: Sergei Shtylyov
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Alan
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Sergei Shtylyov
• Re: [PATCH] libata: fix compile warning caused by ignoring __must_check results
  • From: Tejun Heo
• Re: [DISSCUSS] Iinux raid striped aligned write over xfs
  • From: Jan Engelhardt
• Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Sergei Shtylyov
• Re: [PATCH] ide: Fix ATAPI DMA lost irq problem with CDB intr devices
  • From: Bartlomiej Zolnierkiewicz
• Re: ICH6-M libata disk timeouts in 2.6.19 (except with small queue depth)
  • From: Mike Accetta
• Re: [PATCH] ide: Fix ATAPI DMA lost irq problem with CDB intr devices
  • From: Alan
• [DISSCUSS] Iinux raid striped aligned write over xfs
  • From: Raz Ben-Jehuda(caro)
• Re: [PATCH] sata_uli: ignore SIMPLEX
  • From: Alan
• Re: [PATCH] libata: fix compile warning caused by ignoring __must_check results
  • From: Alan
• Re: [PATCH] ide: Fix ATAPI DMA lost irq problem with CDB intr devices
  • From: Albert Lee
• Re: Celleb cannot exit from ata_host_intr()
  • From: Albert Lee
• Re: [PATCH] ide: Fix ATAPI DMA lost irq problem with CDB intr devices
  • From: Albert Lee
• Re: Reg. SATA II NCQ
  • From: Tejun Heo
• Re: Celleb cannot exit from ata_host_intr()
  • From: Akira Iguchi
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Stefan Richter
• 2.6.19.2 -> 2.6.20-rc5 libata regression
  • From: Justin Piszcz
• Re: 2.6.19.2 -> 2.6.20-rc5 libata regression
  • From: Adrian Bunk
• Re: [PATCH 11/15] ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void
  • From: Sergei Shtylyov
• Re: [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void
  • From: Sergei Shtylyov
• Re: [PATCH 10/15] ide: add ide_set_dma() helper
  • From: Sergei Shtylyov
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Sergei Shtylyov
• Re: ICH6-M libata disk timeouts in 2.6.19 (except with small queue depth)
  • From: Tejun Heo
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ahci: don't enter slumber on power down
  • From: Tejun Heo
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Sergei Shtylyov
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: James Bottomley
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: James Bottomley
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Tejun Heo
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Jeff Garzik
• sata_via WKP
  • From: Luca M. Gazzolo
• [PATCH 5/7] libata: remove unused functions
  • From: Tejun Heo
• [PATCH 1/7] devres: device resource management
  • From: Tejun Heo
• [PATCH 6/7] devres: implement pcim_iomap_regions()
  • From: Tejun Heo
• [PATCH 3/7] libata: update libata core layer to use devres
  • From: Tejun Heo
• [PATCH 2/7] libata: implement ata_host_detach()
  • From: Tejun Heo
• [PATCHSET] Managed device resources, take #3
  • From: Tejun Heo
• [PATCH RESEND] libata: fix compile warning caused by ignoring __must_check results
  • From: Tejun Heo
• [PATCH] libata: fix compile warning caused by ignoring __must_check results
  • From: Tejun Heo
• [PATCH] libata: fix compile warning caused by ignoring __must_check results
  • From: Tejun Heo
• [PATCH] sata_promise: kill qc->nsect
  • From: Tejun Heo
• Re: [PATCH] sata_uli: ignore SIMPLEX
  • From: Jeff Garzik
• Re: [PATCH] sata_uli: ignore SIMPLEX
  • From: Tejun Heo
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Tejun Heo
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Tejun Heo
• Re: [PATCHSET] Managed device resources, take #2
  • From: Jeff Garzik
• Re: [PATCH] sata_mv HighPoint 2310 support (88SX7042)
  • From: Jeff Garzik
• Re: [PATCH] libata: fix handling of port actions in per-dev action mask
  • From: Jeff Garzik
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Jeff Garzik
• Re: [PATCH] sata_via: add PCI ID 0x5337
  • From: Jeff Garzik
• Re: [PATCH] sata_uli: ignore SIMPLEX
  • From: Jeff Garzik
• Re: [PATCH 1/2] sata_promise: issue ATAPI commands as normal packets
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc4] sata_promise: ATAPI cleanup
  • From: Jeff Garzik
• Re: [PATCH] RESPIN: libata: add atapi_passthru=1 parameter
  • From: Jeff Garzik
• Re: [PATCH 2/2] sata_inic162x: finally, driver for initio 162x SATA controllers, take #2
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: kill qc->nsect and cursect
  • From: Jeff Garzik
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Darrick J. Wong
• Re: [PATCH] sd: implement stop_on_shutdown
  • From: Douglas Gilbert
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] (2.6.20-rc4-mm1) pdc202xx_old: fix PIO mode setup
  • From: Sergei Shtylyov
• Re: [PATCH] ide: Fix ATAPI DMA lost irq problem with CDB intr devices
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Sergei Shtylyov
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] sd: implement stop_on_shutdown
  • From: Tejun Heo
• Re: [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Sergei Shtylyov
• Re: [PATCH 1/19] ide: update MAINTAINERS entry
  • From: Sergei Shtylyov
• Bug? ahci.c
  • From: James Ray
• Re: Celleb cannot exit from ata_host_intr()
  • From: Albert Lee
• ICH6-M libata disk timeouts in 2.6.19 (except with small queue depth)
  • From: Mike Accetta
• [PATCH] sata_mv HighPoint 2310 support (88SX7042)
  • From: Olof Johansson
• [PATCH 4/15] ide: convert ide_hwif_t.mmio into flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/15] it8213: fix build and ->ultra_mask
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/15] hpt34x: hpt34x_tune_chipset() (->speedproc) fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/15] ide: disable DMA in ->ide_dma_check for "no IORDY" case
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/15] piix: cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/15] ide: add ide_set_dma() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/15] ide: add ide_tune_dma() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/15] ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/15] sgiioc4: fix sgiioc4_ide_dma_check() to enable/disable DMA properly
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/15] atiixp/jmicron/triflex: fix PIO fallback
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/15] via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support for CX700 and 8237S
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/15] ACPI support for IDE devices
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/15] IDE quilt tree updated
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] libata: Initialize nbytes for internal sg commands
  • From: Brian King
• 2.6.20-rc5: knwon unfixed regressions (v2) (part1)
  • From: Adrian Bunk
• Re: [PATCH] IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: unregister idepnp driver on unload
  • From: Bartlomiej Zolnierkiewicz
• RE: sata_vsc.c cache line size question
  • From: Dailey, Nate
• [PATCH] ide: Fix ATAPI DMA lost irq problem with CDB intr devices
  • From: Albert Lee
• [PATCH] libata: fix handling of port actions in per-dev action mask
  • From: Tejun Heo
• [PATCH] ide: unregister idepnp driver on unload
  • From: Tejun Heo
• Re: sata_vsc.c cache line size question
  • From: Jeremy Higdon
• Celleb cannot exit from ata_host_intr()
  • From: Akira Iguchi
• Re: ICH7m problem using libata
  • From: Matthew Stapleton
• Re: [PATCH 2/3] libata: Initialize nbytes for internal sg commands
  • From: Tejun Heo
• [PATCH] driver/ata: PATA driver for Celleb
  • From: Akira Iguchi
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Akira Iguchi
• [PATCH -mm] sata_nv: cleanup ADMA error handling v2
  • From: Robert Hancock
• Re: ahci problems with sata disk.
  • From: Jens Axboe
• Re: ahci problems with sata disk.
  • From: Jens Axboe
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Mikael Pettersson
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Brian King
• [PATCH 3/3] libata: Initialize qc->pad_len
  • From: Brian King
• [PATCH 1/3] libata: Fixup n_elem initialization
  • From: Brian King
• [PATCH 2/3] libata: Initialize nbytes for internal sg commands
  • From: Brian King
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Jeff Garzik
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: James Bottomley
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Tejun Heo
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: James Bottomley
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Brian King
• Re: ICH7m problem using libata
  • From: Tejun Heo
• Re: ICH7m problem using libata
  • From: Jan Gutter
• Re: crash w/ bonnie++ on XFS on LVM VG w/5 PMP devices
  • From: Robin H. Johnson
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Mikael Pettersson
• Reg. SATA II NCQ
  • From: Jaychander T
• Re: ICH7m problem using libata
  • From: Tejun Heo
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Jeff Garzik
• Re: [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Brian King
• [PATCH] libata: initialize qc->dma_dir to DMA_NONE
  • From: Tejun Heo
• Re: pata_sis:sg_write errors
  • From: Tejun Heo
• Re: ipr SATA problems in 2.6.20
  • From: Alan
• Re: ipr SATA problems in 2.6.20
  • From: Brian King
• Re: ipr SATA problems in 2.6.20
  • From: James Bottomley
• Re: ipr SATA problems in 2.6.20
  • From: Brian King
• Re: ipr SATA problems in 2.6.20
  • From: James Bottomley
• Re: pata_sis:sg_write errors
  • From: jnengland77
• Re: ipr SATA problems in 2.6.20
  • From: Jeff Garzik
• Re: ipr SATA problems in 2.6.20
  • From: Alan
• Re: ahci problems with sata disk.
  • From: Eric D. Mudama
• ipr SATA problems in 2.6.20
  • From: Brian King
• Re: ahci problems with sata disk.
  • From: Jeff Garzik
• Re: [PATCH 3/4] libata-sff.c: add another IRQ calls
  • From: Jeff Garzik
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Jeff Garzik
• Re: ahci problems with sata disk.
  • From: Mark Hahn
• crash w/ bonnie++ on XFS on LVM VG w/5 PMP devices
  • From: Brad Fitzpatrick
• Re: ahci problems with sata disk.
  • From: Mark Lord
• Re: ahci problems with sata disk.
  • From: Andrew Lyon
• Re: ICH7m problem using libata
  • From: Jan Gutter
• Re: ICH7m problem using libata
  • From: Mikael Pettersson
• Re: ICH7m problem using libata
  • From: Jan Gutter
• Re: [PATCH 3/4] libata-sff.c: add another IRQ calls
  • From: Alan
• Re: [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Alan
• Re: ICH7m problem using libata
  • From: Tejun Heo
• Re: [PATCH] sata_uli: ignore SIMPLEX
  • From: Alan
• Re: sata_via: eSATA drive not recognised on VT6421 card
  • From: Alan
• Re: ICH7m problem using libata
  • From: Jan Gutter
• [PATCH 4/4] drivers/ata: PATA driver for Celleb
  • From: Akira Iguchi
• [PATCH 3/4] libata-sff.c: add another IRQ calls
  • From: Akira Iguchi
• [PATCH 2/4] libata-core.c: add another IRQ calls
  • From: Akira Iguchi
• [PATCH 1/4] libata.h: add another IRQ calls
  • From: Akira Iguchi
• [PATCH 0/4] drivers/ata: add another IRQ calls
  • From: Akira Iguchi
• Re: ICH7m problem using libata
  • From: Tejun Heo
• [PATCH] ahci: improve and limit spurious interrupt messages, take#2
  • From: Tejun Heo
• [PATCH] sata_uli: ignore SIMPLEX
  • From: Tejun Heo
• sata_via: eSATA drive not recognised on VT6421 card
  • From: Ray Overdijk
• [PATCH] sata_via: add PCI ID 0x5337
  • From: Tejun Heo
• Re: pata_sis:sg_write errors
  • From: Tejun Heo
• Re: ahci problems with sata disk.
  • From: kenneth johansson
• Re: ICH7m problem using libata
  • From: Matthew Stapleton
• Re: 2.6.20-rc4-mm1
  • From: Jens Axboe
• pata_sis:sg_write errors
  • From: Jordan Neumeyer
• RE: sata_vsc.c cache line size question
  • From: Dailey, Nate
• Re: [PATCH -mm] sata_nv: cleanup ADMA error handling
  • From: Robert Hancock
• Re: Proposed changes for libata speed handling
  • From: Jeff Garzik
• Re: ahci problems with sata disk.
  • From: Tejun Heo
• Re: ahci problems with sata disk.
  • From: Alan
• Re: ahci problems with sata disk.
  • From: kenneth johansson
• Re: ahci problems with sata disk.
  • From: Tejun Heo
• [PATCH] ahci: improve and limit spurious interrupt messages
  • From: Tejun Heo
• Re: 2.6.20-rc4-mm1
  • From: Ingo Molnar
• PATA ATAPI detection debug
  • From: Tejun Heo
• Re: [TEST] PATA Promise 20378
  • From: Mikael Pettersson
• Re: ICH7m problem using libata
  • From: Tejun Heo
• Re: Norco DS-1220 (sil3726+sil3124) / libata-tj bug report
  • From: Tejun Heo
• Re: Proposed changes for libata speed handling
  • From: Tejun Heo
• [PATCH -mm] sata_nv: cleanup ADMA error handling
  • From: Robert Hancock
• Re: 2.6.20-rc4-mm1
  • From: Jens Axboe
• Re: 2.6.20-rc4-mm1
  • From: Jens Axboe
• Re: 2.6.20-rc4-mm1
  • From: Thomas Gleixner
• [TEST] PATA Promise 20378
  • From: Vincent Legoll
• Re: sata_vsc.c cache line size question
  • From: Jeff Garzik
• ahci problems with sata disk.
  • From: kenneth johansson
• Re: sata_vsc.c cache line size question
  • From: Alan
• Re: 2.6.20-rc4-mm1
  • From: Thomas Gleixner
• Re: 2.6.20-rc4-mm1
  • From: Thomas Gleixner
• Re: 2.6.20-rc4-mm1
  • From: Thomas Gleixner
• Re: sata_vsc.c cache line size question
  • From: Jeremy Higdon
• Re: Norco DS-1220 (sil3726+sil3124) / libata-tj bug report
  • From: Brad Fitzpatrick
• [PATCH 2/2] sata_promise: handle ATAPI_NODATA ourselves
  • From: Mikael Pettersson
• [PATCH 1/2] sata_promise: issue ATAPI commands as normal packets
  • From: Mikael Pettersson
• [PATCH] IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter
  • From: Mark Lord
• Re: ahci_softreset prevents acpi_power_off
  • From: Faik Uygur
• Re: Proposed changes for libata speed handling
  • From: Alan
• 2.6.20-rc5: known unfixed regressions
  • From: Adrian Bunk
• Re: ahci_softreset prevents acpi_power_off
  • From: Faik Uygur
• Re: ICH6-M libata disk timeouts 2.6.18 -> 2.6.19
  • From: Mike Accetta
• Re: ICH6-M libata disk timeouts 2.6.18 -> 2.6.19
  • From: Tejun Heo
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Tejun Heo
• Re: Norco DS-1220 (sil3726+sil3124) / libata-tj bug report
  • From: Brad Fitzpatrick
• Re: Proposed changes for libata speed handling
  • From: Tejun Heo
• Re: ahci_softreset prevents acpi_power_off
  • From: Tejun Heo
• Re: [PATCH 0/4] drivers/ata: add low-level I/O calls
  • From: Benjamin Herrenschmidt
• Re: [PATCH 10/19] trm290: remove redundant CONFIG_BLK_DEV_IDEDMA
  • From: Bartlomiej Zolnierkiewicz
• sata_vsc.c cache line size question
  • From: Dailey, Nate
• Re: [PATCH 10/19] trm290: remove redundant CONFIG_BLK_DEV_IDEDMA
  • From: Sergei Shtylyov
• Re: [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Bartlomiej Zolnierkiewicz
• 2.6.20-rc4, ata2: spurious interrupt (irq_stat 0x4 active_tag -84148995 sactive 0x3)
  • From: Robin Humble
• Re: [PATCH 0/4] drivers/ata: add low-level I/O calls
  • From: Jeff Garzik
• Re: [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Alan
• Re: [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 19/19] ide: use PIO/MMIO operations directly where possible
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Alan
• Re: [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Bartlomiej Zolnierkiewicz
• Proposed changes for libata speed handling
  • From: Alan
• Re: [PATCH 0/4] drivers/ata: add low-level I/O calls
  • From: Benjamin Herrenschmidt
• VIA VT6421A SATA controller
  • From: Greg Farrell
• Re: hwif->rw_disk() method
  • From: Alan
• Re: [PATCH 0/4] drivers/ata: add low-level I/O calls
  • From: Alan
• Re: [PATCH 0/19] new IDE quilt tree
  • From: Alan
• [PATCH 4/4] drivers/ata: PATA driver for Celleb
  • From: Akira Iguchi
• [PATCH 3/4] libata-sff.c: add low-level I/O calls
  • From: Akira Iguchi
• [PATCH 2/4] libata-core.c: add low-level I/O calls
  • From: Akira Iguchi
• [PATCH 1/4] libata.h: add low-level I/O calls
  • From: Akira Iguchi
• [PATCH 0/4] drivers/ata: add low-level I/O calls
  • From: Akira Iguchi
• Re: [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Alan
• Re: [PATCH 19/19] ide: use PIO/MMIO operations directly where possible
  • From: Alan
• [PATCH 8/19] ide: remove write-only ide_pio_data_t.blacklisted
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/19] ia64: add pci_get_legacy_ide_irq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/19] ide: add missing __init tags to IDE PCI host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/19] au1xxx-ide: remove dead code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/19] ide: remove write-only ide_hwif_t.no_dsc flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/19] trm290: remove redundant CONFIG_BLK_DEV_IDEDMA
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/19] ide: use PIO/MMIO operations directly where possible
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/19] ide: add ide_use_fast_pio() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/19] ide: unexport ide_set_xfer_rate()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/19] sis5513: sis5513_config_xfer_rate() cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/19] svwks: small cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/19] ide: remove ide_pci_device_t tables with only one entry
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/19] ide: remove ide_drive_t.usage
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/19] cs5530: small cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/19] hpt366: remove redundant check from init_dma_hpt366()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/19] pdc202xx_old: remove dead code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/19] ide: it8213 driver update
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/19] ide: add it8213 driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/19] ide: update MAINTAINERS entry
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/19] new IDE quilt tree
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Benjamin Herrenschmidt
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Akira Iguchi
• Re: [PATCH] ia64: add pci_get_legacy_ide_irq() (was: [2.6 patch] let BLK_DEV_AMD74XX depend on X86)
  • From: Adrian Bunk
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Kovid Goyal
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Benjamin Herrenschmidt
• Re: [PATCH 1/2] drivers/ata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [2.6 patch] let BLK_DEV_AMD74XX depend on X86
  • From: Segher Boessenkool
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Linas Vepstas
• Re: [2.6 patch] let BLK_DEV_AMD74XX depend on X86
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] let BLK_DEV_AMD74XX depend on X86
  • From: Alan
• [PATCH] ia64: add pci_get_legacy_ide_irq() (was: [2.6 patch] let BLK_DEV_AMD74XX depend on X86)
  • From: Bartlomiej Zolnierkiewicz
• [2.6 patch] let BLK_DEV_AMD74XX depend on X86
  • From: Adrian Bunk
• Re: hwif->rw_disk() method
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Arnd Bergmann
• ahci_softreset prevents acpi_power_off
  • From: Faik Uygur
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Akira Iguchi
• Re: [PATCH 1/2] drivers/ata: PATA driver for Celleb
  • From: Arnd Bergmann
• Re: [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Arnd Bergmann
• [PATCH 1/2] drivers/ata: PATA driver for Celleb
  • From: Akira Iguchi
• [PATCH 0/2] drivers/ata: PATA driver for Celleb
  • From: Akira Iguchi
• [PATCH 2/2] drivers/ata: export some static functions in libata-core.c
  • From: Akira Iguchi
• sata_via on MSI MS-7293 MB
  • From: luca pedrielli
• 2.6.20-rc4: known unfixed regressions (v3)
  • From: Adrian Bunk
• Re: sata_inic162x driver for 2.6.19
  • From: Bob Stewart
• Re: sata_inic162x driver for 2.6.19
  • From: Alan
• Re: sata_inic162x driver for 2.6.19
  • From: Richard Purdie
• Re: libata hotplug and md raid?
  • From: Mike Accetta
• Re: No DMA with HTP370 IDE controller
  • From: Michael Bueker
• Re: hwif->rw_disk() method
  • From: Bartlomiej Zolnierkiewicz
• Re: No DMA with HTP370 IDE controller
  • From: Sergei Shtylyov
• Re: No DMA with HTP370 IDE controller
  • From: Jeff Garzik
• Re: hwif->rw_disk() method
  • From: Sergei Shtylyov
• Re: hwif->rw_disk() method
  • From: Alan
• hwif->rw_disk() method
  • From: Sergei Shtylyov
• Re: No DMA with HTP370 IDE controller
  • From: Michael Bueker
• Re: No DMA with HTP370 IDE controller
  • From: Sergei Shtylyov
• [PATCH 2.6.20-rc4] MAINTAINERS: maintainer for sata_promise
  • From: Mikael Pettersson
• [PATCH 2.6.20-rc4] sata_promise: ATAPI cleanup
  • From: Mikael Pettersson
• [PATCH 11/13] libata: remove unused functions
  • From: Tejun Heo
• [PATCH 1/13] devres: device resource management core
  • From: Tejun Heo
• [PATCH 8/13] libata: implement ata_host_detach()
  • From: Tejun Heo
• [PATCH 12/13] devres: implement pcim_iomap_regions()
  • From: Tejun Heo
• [PATCH 2/13] devres: implement managed IO region interface
  • From: Tejun Heo
• [PATCH 5/13] devres: implement managed PCI interface
  • From: Tejun Heo
• [PATCH 7/13] devres: add Documentation/driver-model/devres.txt
  • From: Tejun Heo
• [PATCH 9/13] libata: update libata core layer to use devres
  • From: Tejun Heo
• [PATCH 3/13] devres: implement managed IRQ interface
  • From: Tejun Heo
• [PATCH 6/13] devres: implement managed iomap interface
  • From: Tejun Heo
• [PATCH 4/13] devres: implement managed DMA interface
  • From: Tejun Heo
• [PATCHSET] Managed device resources, take #2
  • From: Tejun Heo
• Re: ICH6-M libata disk timeouts 2.6.18 -> 2.6.19
  • From: Mike Accetta
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Robert Hancock
• Re: [PATCH 3/3] atiixp.c: add cable detection support for ATI IDE
  • From: Conke Hu
• Re: No DMA with HTP370 IDE controller
  • From: Michael Bueker
• ICH6-M libata disk timeouts 2.6.18 -> 2.6.19
  • From: Mike Accetta
• Re: ICH7m problem using libata
  • From: Matthew Stapleton
• Re: [PATCH 3/3] atiixp.c: add cable detection support for ATI IDE
  • From: Andrew Morton
• Re: [PATCH 1/3] atiixp.c: remove unused code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] atiixp.c: add cable detection support for ATI IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] atiixp.c: add cable detection support for ATI IDE
  • From: Jeff Garzik
• Re: [PATCH 3/3] atiixp.c: add cable detection support for ATI IDE
  • From: Conke Hu
• Re: [PATCH 2/3] atiixp.c: sb600 ide only has one channel
  • From: Conke Hu
• Re: DMA errors with HTP370 IDE in <= 2.6.18.2
  • From: Sergei Shtylyov
• Re: [PATCH 1/3] atiixp.c: remove unused code
  • From: Conke Hu
• Re: libata-dev.git rebased
  • From: Jeff Garzik
• Re: [PATCH] libata: handle pci_enable_device() failure while resuming
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: straighten out ATA_ID_* constants
  • From: Jeff Garzik
• Re: [2.6 patch] drivers/ata/: make 4 functions static
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: add suspend/resume support v3 (Resubmit)
  • From: Jeff Garzik
• Re: [PATCH] pata_sis: implement laptop list and add ASUS A6K/A6U
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: add ICH7 on Acer 3682WLMi to laptop list
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc4 2/2] sata_promise: ATAPI support
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc4 1/2] sata_promise: TX2plus PATA support
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc4 1/2] sata_promise: TX2plus PATA support
  • From: Jeff Garzik
• Re: SATA Promise
  • From: Mikael Pettersson
• [PATCH 2.6.20-rc4 2/2] sata_promise: ATAPI support
  • From: Mikael Pettersson
• [PATCH 2.6.20-rc4 1/2] sata_promise: TX2plus PATA support
  • From: Mikael Pettersson
• 2.6.20-rc4: known unfixed regressions (v2)
  • From: Adrian Bunk
• [PATCH] pata_sis: implement laptop list and add ASUS A6K/A6U
  • From: Tejun Heo
• DMA errors with HTP370 IDE in <= 2.6.18.2
  • From: Michael Bueker
• [PATCH] pata_sis: implement laptop list and add ASUS A6K/A6U
  • From: Tejun Heo
• Re: SATA Promise
  • From: Mikael Pettersson
• [PATCH] ata_piix: add ICH7 on Acer 3682WLMi to laptop list
  • From: Tejun Heo
• Re: SATA Promise
  • From: Gary Thomas
• Re: SATA Promise
  • From: Jeff Garzik
• Re: SATA Promise
  • From: Gary Thomas
• Re: [PATCH 2.6.20-rc3-mm1 2/2] libata: SiS 180 pata/sata support
  • From: Alan
• Re: Initial Promise SX4 hw docs opened
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc3-mm1 2/2] libata: SiS 180 pata/sata support
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc3-mm1 2/2] libata: SiS 180 pata/sata support
  • From: Alan
• [PATCH] ide/generic: Jmicron has its own drivers now
  • From: Alan
• Re: [PATCH 2.6.20-rc3-mm1 2/2] libata: SiS 180 pata/sata support
  • From: Jeff Garzik
• Re: [PATCH libata #promise-sata-pata] sata_promise: 2037x PATAPI support
  • From: Alan
• Re: [PATCH 2.6.20-rc3-mm1 2/2] libata: SiS 180 pata/sata support
  • From: Alan
• Re: [PATCH 2.6.20-rc3-mm1 1/2] libata: SiS 180 pata/sata support
  • From: Alan
• Re: [PATCH 2.6.20-rc3] sata_promise: ATAPI support
  • From: Mikael Pettersson
• Re: [PATCH libata #promise-sata-pata] sata_promise: 2037x PATAPI support
  • From: Mikael Pettersson
• Re: [PATCH libata #promise-sata-pata] sata_promise: unbreak 20619
  • From: Mikael Pettersson
• Re: [RFC] sata_promise: handle TX2plus PATA locally
  • From: Mikael Pettersson
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Luben Tuikov
• Re: [RFC,PATCHSET] Managed device resources
  • From: Tejun Heo
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Tejun Heo
• Re: (Another?) Seagate / Sil3112a problem...
  • From: Tejun Heo
• Re: Norco DS-1220 (sil3726+sil3124) / libata-tj bug report
  • From: Tejun Heo
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc3] sata_promise: ATAPI support
  • From: Jeff Garzik
• Re: [PATCH libata #promise-sata-pata] sata_promise: 2037x PATAPI support
  • From: Jeff Garzik
• Re: [PATCH libata #promise-sata-pata] sata_promise: unbreak 20619
  • From: Jeff Garzik
• Re: [RFC] sata_promise: handle TX2plus PATA locally
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc3-mm1 2/2] libata: SiS 180 pata/sata support
  • From: Jeff Garzik
• 2.6.20-rc4: known unfixed regressions
  • From: Adrian Bunk
• Re: [PATCH libata #promise-sata-pata] sata_promise: 2037x PATAPI support
  • From: Mikael Pettersson
• [RFC] sata_promise: handle TX2plus PATA locally
  • From: Mikael Pettersson
• Re: [PATCH 2.6.20-rc2-mm1] slc90e66: carry over fixes from piix driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2.6.20-rc2-mm1] PIIX tuneproc() fixes/cleanups
  • From: Bartlomiej Zolnierkiewicz
• 2.6.20-rc3: known unfixed regressions (v4)
  • From: Adrian Bunk
• [PATCH libata #promise-sata-pata] sata_promise: 2037x PATAPI support
  • From: Mikael Pettersson
• [PATCH libata #promise-sata-pata] sata_promise: unbreak 20619
  • From: Mikael Pettersson
• [PATCH 2.6.20-rc3] sata_promise: ATAPI support
  • From: Mikael Pettersson
• Re: problem with pata_hpt37x ...
  • From: Brad Campbell
• [patch 16/50] SCSI: add missing cdb clearing in scsi_execute()
  • From: Chris Wright
• Re: Bugs in Kernels 2.6.20-rc2, rc3 and 2.6.20-rc2-mm1
  • From: Andrew Morton
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Benjamin Herrenschmidt
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Olaf Hering
• Re: Norco DS-1220 (sil3726+sil3124) / libata-tj bug report
  • From: Jim Paris
• Norco DS-1220 (sil3726+sil3124) / libata-tj bug report
  • From: Brad Fitzpatrick
• Re: [RFC,PATCHSET] Managed device resources
  • From: Greg KH
• Re: [RFC,PATCHSET] Managed device resources
  • From: Greg KH
• Re: [RFC,PATCHSET] Managed device resources
  • From: Jeff Garzik
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Benjamin Herrenschmidt
• Re: Initial Promise SX4 hw docs opened
  • From: Dan Williams
• Re: problem with pata_hpt37x ...
  • From: Brad Campbell
• Re: What is the correct way to indicate an unassigned PCI resource ?
  • From: Olaf Hering
• 2.6.20-rc3: known unfixed regressions (v3)
  • From: Adrian Bunk
• Re: problem with pata_hpt37x ...
  • From: Herbert Poetzl
• Re: problem with pata_hpt37x ...
  • From: Brad Campbell
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Jens Axboe
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Mark Lord
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Jens Axboe
• Re: [PATCH] add delay around sl82c105_reset_engine calls
  • From: Alan
• Re: IRQ anomaly
  • From: Alan
• IRQ anomaly
  • From: Valentijn Sessink
• Re: 2.6.20-rc3 IRQ race upon resume? => killing SATA IRQ
  • From: Alan
• Re: [PATCH] add delay around sl82c105_reset_engine calls
  • From: Olaf Hering
• Re: 2.6.20-rc3 IRQ race upon resume? => killing SATA IRQ
  • From: Tejun Heo
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Tejun Heo
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Tejun Heo
• Initial Promise SX4 hw docs opened
  • From: Jeff Garzik
• Re: 2.6.20-rc3 IRQ race upon resume? => killing SATA IRQ
  • From: Bjorn Wesen
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Andrew Lyon
• [PATCH] sata_nv: add suspend/resume support v3 (Resubmit)
  • From: Robert Hancock
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Mark Lord
• 2.6.20-rc3 IRQ race upon resume? => killing SATA IRQ
  • From: Bjorn Wesen
• Re: CDROM drive not found when booting using new libata code
  • From: Dâniel Fraga
• [2.6 patch] drivers/ata/: make 4 functions static
  • From: Adrian Bunk
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: James Bottomley
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Douglas Gilbert
• Re: [PATCH] RESPIN: libata: add atapi_passthru=1 parameter
  • From: Mark Lord
• Re: CDROM drive not found when booting using new libata code
  • From: Art Haas
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Mark Lord
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: bbee
• Fwd: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Andrew Lyon
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: James Bottomley
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: James Bottomley
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Mark Lord
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Alan
• [PATCH 2/2] sata_inic162x: finally, driver for initio 162x SATA controllers, take #2
  • From: Tejun Heo
• [PATCH 1/2] libata: kill qc->nsect and cursect
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_inic162x: driver for initio 162x SATA controllers, take 2
  • From: Tejun Heo
• [PATCH] RESPIN: libata: add atapi_passthru=1 parameter
  • From: Mark Lord
• [PATCH] libata: add atapi_passthru=1 parameter
  • From: Mark Lord
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Mark Lord
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Mark Lord
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Mark Lord
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Tejun Heo
• Re: ICH7m problem using libata
  • From: Tejun Heo
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: bbee
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Douglas Gilbert
• Re: CDROM drive not found when booting using new libata code
  • From: Tejun Heo
• Re: ICH7m problem using libata
  • From: Matthew Stapleton
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Tejun Heo
• Re: [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: James Bottomley
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH] cdrom: longer timeout for "Read Track Info" command
  • From: Jeremy Higdon
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Alan
• Re: [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Jeff Garzik
• re:[PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Mark Lord
• [PATCH] libata: add support for ATA_16 commands to ATAPI devices
  • From: Mark Lord
• [PATCH] SCSI, libata: add support for ATA_16 commands to libata ATAPI devices
  • From: Mark Lord
• Re: [PATCH] libata use ATA_12 in HDIO_* ioctls for ATAPI compatibility
  • From: Mark Lord
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Mark Lord
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Mark Lord
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Mark Lord
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Jeff Garzik
• [PATCH] libata use ATA_12 in HDIO_* ioctls for ATAPI compatibility
  • From: Mark Lord
• Re: A question to Uwe Koziolek (raid on sis180)
  • From: Uwe Koziolek
• [PATCH] Add ATA_12/ATA_16 support for libata ATAPI
  • From: Mark Lord
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Jeff Garzik
• Re: [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Mark Lord
• [PATCH 2.6.20-rc3] fix broken retval test in sr_block_ioctl
  • From: Mark Lord
• ATA_12 support for libata/ATAPI devices
  • From: Mark Lord
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Mark Lord
• Re: CDROM drive not found when booting using new libata code
  • From: Art Haas
• Re: [PATCH 2.6.20-rc2-mm1] HPT36x PCI clock detection fix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] atiixp: Old drivers/ide layer driver for the ATIIXP hang fix
  • From: Bartlomiej Zolnierkiewicz
• 2.6.20-rc3: known regressions with patches available (part 2)
  • From: Adrian Bunk
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Mark Lord
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Tejun Heo
• Re: [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Mark Lord
• [PATCH] atiixp: Old drivers/ide layer driver for the ATIIXP hang fix
  • From: Alan
• Re: problem with pata_hpt37x ...
  • From: Alan
• Re: [PATCH] cdrom: longer timeout for "Read Track Info" command
  • From: Jens Axboe
• Re: [PATCH *3/3*] libata: implement HDIO_GET_IDENTITY
  • From: Tejun Heo
• [PATCH] libata: implement HDIO_GET_IDENTITY
  • From: Tejun Heo
• [PATCH 2/3] libata: use ata_id_c_string()
  • From: Tejun Heo
• [PATCH 1/3] libata: straighten out ATA_ID_* constants
  • From: Tejun Heo
• Re: [PATCH] cdrom: longer timeout for "Read Track Info" command
  • From: Alan
• A question to Uwe Koziolek (raid on sis180)
  • From: rmanzhos
• problem with pata_hpt37x ...
  • From: Herbert Poetzl
• [PATCH] cdrom: longer timeout for "Read Track Info" command
  • From: Jeremy Higdon
• Re: [PATCH] preliminary sata_promise ATAPI support
  • From: Mikael Pettersson
• Re: AHCI NCQ on ESB2 (8086:2681) (RESOLVED)
  • From: Bryan Boatright
• Re: AHCI NCQ on ESB2 (8086:2681)
  • From: Bryan Boatright
• Re: AHCI NCQ on ESB2 (8086:2681)
  • From: Tejun Heo
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Andrew Lyon
• Re: AHCI NCQ on ESB2 (8086:2681)
  • From: Dave Maurer
• Re: bug: AHCI: Serial ATA to CompactFlash adapter loops endlessly
  • From: Mark Lord
• AHCI NCQ on ESB2 (8086:2681)
  • From: Bryan Boatright
• Re: 2.6.20-rc2: known unfixed regressions (v2)
  • From: Ismail Dönmez
• 2.6.20-rc2: known unfixed regressions (v2)
  • From: Adrian Bunk
• Re: [RFC,PATCHSET] Managed device resources
  • From: Denis Vlasenko
• [PATCH 2.6.20-rc2-mm1] HPT36x PCI clock detection fix
  • From: Sergei Shtylyov
• Re: SIL3512 lockup problem using driver verion 0.9 and Linux 2.6.14
  • From: Steve Graham
• [PATCH 2.6.20-rc2-mm1] slc90e66: carry over fixes from piix driver
  • From: Sergei Shtylyov
• [PATCH 2.6.20-rc2-mm1] PIIX tuneproc() fixes/cleanups
  • From: Sergei Shtylyov
• Re: bug: AHCI: Serial ATA to CompactFlash adapter loops endlessly
  • From: Benjamin LaHaise
• [PATCH] preliminary sata_promise ATAPI support
  • From: Mikael Pettersson
• Re: bug: AHCI: Serial ATA to CompactFlash adapter loops endlessly
  • From: Mark Lord
• Re: hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Adam J. Richter
• Re: hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2.6.19.1 1/1] ata_piix: ICH6M MAP typo
  • From: Tejun Heo
• 2.6.20-rc2: known unfixed regressions
  • From: Adrian Bunk
• [PATCH 2.6.19.1 1/1] ata_piix: ICH6M MAP typo
  • From: Pierre Tardy
• Re: hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Bartlomiej Zolnierkiewicz
• sata_sil24 startup weirdness - long times to start up all PMP sub-links
  • From: Robin H. Johnson
• Re: sata_sil24 performance weirdness
  • From: Robin H. Johnson
• VT8237A SATA and VT8521 PATA
  • From: Yasuhiro Harada
• Re: hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Adam J. Richter
• Re: sata_sil24 performance weirdness
  • From: Tejun Heo
• Re: CDROM drive not found when booting using new libata code
  • From: Tejun Heo
• Re: ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Tejun Heo
• ata1: spurious interrupt (irq_stat 0x8 active_tag -84148995 sactive 0x0) r0xj0
  • From: Andrew Lyon
• Re: [PATCH] ata_piix.c ICH6M MAP typo.
  • From: Tejun Heo
• [PATCH] ata_piix.c ICH6M MAP typo.
  • From: Pierre Tardy
• libata FAQ
  • From: Jeff Garzik
• sata_sil24 performance weirdness
  • From: Richard Scobie
• Re: [PATCH] via82cxxx: fix cable detection
  • From: Jeff Garzik
• sata_sil24 performance weirdness
  • From: Robin H. Johnson
• Re: [PATCH] via82cxxx: fix cable detection
  • From: Bartlomiej Zolnierkiewicz
• Re: CDROM drive not found when booting using new libata code
  • From: Tejun Heo
• [PATCH] via82cxxx: fix cable detection
  • From: Tejun Heo
• [PATCH 5/12] devres: implement managed PCI interface
  • From: Tejun Heo
• [PATCH 10/12] libata: remove unused functions
  • From: Tejun Heo
• [PATCH 8/12] libata: update libata core layer to use devres
  • From: Tejun Heo
• [PATCH 7/12] libata: handle pci_enable_device() failure while resuming
  • From: Tejun Heo
• [PATCH 11/12] devres: implement pcim_iomap_regions()
  • From: Tejun Heo
• [PATCH 2/12] devres: implement managed IO region interface
  • From: Tejun Heo
• [PATCH 6/12] devres: implement managed iomap interface
  • From: Tejun Heo
• [PATCH 9/12] libata: update SATA LLDs to use devres
  • From: Tejun Heo
• [RFC,PATCHSET] Managed device resources
  • From: Tejun Heo
• [PATCH 3/12] devres: implement managed IRQ interface
  • From: Tejun Heo
• [PATCH 4/12] devres: implement managed DMA interface
  • From: Tejun Heo
• [PATCH 1/12] devres: device resource management core
  • From: Tejun Heo
• [PATCH] libata: handle pci_enable_device() failure while resuming
  • From: Tejun Heo
• Re: hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Adam J. Richter
• Re: hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Adam J. Richter
• SATAII150 TX4 Disk ordering (Was: Promise SATAII150 TX4: strange disk ordering)
  • From: Peter Rabbitson
• hda on Via Epia-ML motherboard seen on 2.6.18, but not 2.6.19
  • From: Adam J. Richter
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Gary Hade
• ep93xx pata problem
  • From: Manfred Gruber
• Re: sata_inic162x driver for 2.6.19
  • From: Bob Stewart
• RE: [PATCH 1/2] sata_nv & ahci: Move some IDs from sata_nv.c to ahci.c
  • From: Peer Chen
• Re: sata_inic162x driver for 2.6.19
  • From: Bob Stewart
• Re: sata_inic162x driver for 2.6.19
  • From: Bob Stewart
• Re: [git patches] libata fixes
  • From: Stephen Frost
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 2/2] sata_inic162x: driver for initio 162x SATA controllers, take 2
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata: clean up variable name usage in xlat related functions
  • From: Jeff Garzik
• Re: [PATCH] libata-scsi: ata_task_ioctl should return ATA registers from sense data
  • From: Jeff Garzik
• Re: [PATCH 1/2] sata_nv & ahci: Move some IDs from sata_nv.c to ahci.c
  • From: Jeff Garzik
• libata-pata: how to select PIO mode instead of DMA?
  • From: Erik Mouw
• Re: [PATCH 2/2] sata_inic162x: driver for initio 162x SATA controllers, take 2
  • From: Tejun Heo
• sata_inic162x driver for 2.6.19
  • From: Tejun Heo
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Kovid Goyal
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Tejun Heo
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Tejun Heo
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Gary Hade
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Kovid Goyal
• Re: bug: AHCI: Serial ATA to CompactFlash adapter loops endlessly
  • From: Benjamin LaHaise
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Tejun Heo
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Tejun Heo
• Re: Frequent SATA errors / port timeouts in 2.6.18.3?
  • From: Tejun Heo
• Re: Frequent SATA errors / port timeouts in 2.6.18.3?
  • From: Patrik Jonsson
• Re: ICH7m problem using libata
  • From: Tejun Heo
• Re: [PATCH 2.6.20-git] sata_svw: Check for errors from ata_device_add()
  • From: Ben Collins
• [PATCH 2.6.20-git] sata_svw: Check for errors from ata_device_add()
  • From: Ben Collins
• Re: SATA Promise
  • From: Gary Thomas
• Re: SATA300 TX4 + WD2500KS = status=0x50 { DriveReady SeekComplete }
  • From: Gregory Brauer
• Re: SATA Promise
  • From: Mikael Pettersson
• SATA Promise
  • From: Gary Thomas
• Re: SATA300 TX4 + WD2500KS = status=0x50 { DriveReady SeekComplete }
  • From: Mikael Pettersson
• ata_piix: Quick question
  • From: Joakim Crafack
• Re: nForce ADMA/NCQ
  • From: Matteo Croce
• Re: nForce ADMA/NCQ
  • From: Tejun Heo
• Re: [PATCH] libata-scsi: ata_task_ioctl should return ATA registers from sense data
  • From: Tejun Heo
• Re: [PATCH] Fix ata_task_ioctl to return ATA registers on check condition
  • From: Tejun Heo
• Re: Frequent SATA errors / port timeouts in 2.6.18.3?
  • From: Tejun Heo
• nForce ADMA/NCQ
  • From: Matteo Croce
• Re: ICH7m problem using libata
  • From: Matthew Stapleton
• Re: sata_sis and SIS180 in combined mode
  • From: Uwe Koziolek
• [PATCH] libata-scsi: ata_task_ioctl should return ATA registers from sense data
  • From: David Milburn
• Re: pata_ali complains at boot
  • From: Taneli Vähäkangas
• Re: Slow SATA detection on bootup
  • From: Stephen Hemminger
• Re: [PATCH 2/2] libata: turn off NCQ if queue depth is adjusted to 1
  • From: Jens Axboe
• Re: [PATCH 2/2] sata_inic162x: finally, driver for initio 162x SATA controllers
  • From: Bob Stewart
• Re: [PATCH 2/2] sata_inic162x: finally, driver for initio 162x SATA controllers
  • From: Tejun Heo
• Re: [-mm patch] drivers/ide/pci/tc86c001.c: make a function static
  • From: Sergei Shtylyov
• Re: [-mm patch] drivers/ide/pci/tc86c001.c: make a function static
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] sata_inic162x: finally, driver for initio 162x SATA controllers
  • From: Alan
• [PATCH 2/2] sata_inic162x: finally, driver for initio 162x SATA controllers
  • From: Tejun Heo
• [PATCH 1/2] libata: kill qc->nsect and cursect
  • From: Tejun Heo
• [PATCH 4/4] SCSI: revert clear-garbage-after-CDB fix
  • From: Tejun Heo
• [PATCH 3/4] libata: take scmd->cmd_len into account when translating SCSI commands
  • From: Tejun Heo
• [PATCH 2/4] libata: kill @cdb argument from xlat methods
  • From: Tejun Heo
• [PATCH 1/4] libata: clean up variable name usage in xlat related functions
  • From: Tejun Heo
• Re: pata_ali complains at boot
  • From: Alan
• [git patches] libata fixes
  • From: Jeff Garzik