Hi, We have a Sony PCG-6H1M laptop. It started failing to poweroff with our switch from 2.6.16 stable series kernels to 2.6.18 stable series. Rebooting works. While searching for the cause, I have found these reported bug reports in the kernel bugzilla which may be related to this bug: http://bugzilla.kernel.org/show_bug.cgi?id=6982 http://bugzilla.kernel.org/show_bug.cgi?id=7447 According to git bisect, this is the first bad commit: 4658f79bec0b51222e769e328c2923f39f3bda77 is first bad commit commit 4658f79bec0b51222e769e328c2923f39f3bda77 Author: Tejun Heo <htejun@xxxxxxxxx> Date: Wed Mar 22 21:07:03 2006 +0900 [PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@xxxxxxxxx> Signed-off-by: Jeff Garzik <jeff@xxxxxxxxxx> :040000 040000 ba0a16d0ef82b6577bb61cfb18e6d9df9ee0984e d0fc78d8f9bbe238f98ac8964562a33e64b30605 M drivers With v2.6.20-rc4 from git, it is still failing to poweroff. By not compiling CONFIG_SCSI_SATA_AHCI, it successfully powers off. Also with CONFIG_SCSI_SATA_AHCI, reverting this patch manually by setting softreset to NULL in ata_do_eh calls in ahci.c makes the machine poweroff. I have attached the dmesg output with defined ATA_DEBUG, ATA_VERBOSE_DEBUG if it helps. Also you may find lspci output attached. Please let me know if anything else is needed. Regards, - Faik Linux version 2.6.20-rc4 (root@pardus) (gcc version 3.4.6) #56 SMP Thu Jan 11 11:38:37 EET 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000d8000 size: 0000000000028000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001fd90000 end: 000000001fe90000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001fe90000 size: 000000000000d000 end: 000000001fe9d000 type: 3 copy_e820_map() start: 000000001fe9d000 size: 0000000000063000 end: 000000001ff00000 type: 4 copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010006000 end: 00000000f0006000 type: 2 copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2 copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2 copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fe90000 (usable) BIOS-e820: 000000001fe90000 - 000000001fe9d000 (ACPI data) BIOS-e820: 000000001fe9d000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 510MB LOWMEM available. Entering add_active_range(0, 0, 130704) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 130704 HighMem 130704 -> 130704 early_node_map[1] active PFN ranges 0: 0 -> 130704 On node 0 totalpages: 130704 DMA zone: 52 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4044 pages, LIFO batch:0 Normal zone: 1607 pages used for memmap Normal zone: 125001 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6780 ACPI: RSDT (v001 Sony V0 0x20051108 PTL 0x00000000) @ 0x1fe97449 ACPI: FADT (v002 Sony V0 0x20051108 PTL 0x00000050) @ 0x1fe9ce78 ACPI: MADT (v001 Sony V0 0x20051108 PTL 0x00000050) @ 0x1fe9cefc ACPI: BOOT (v001 Sony V0 0x20051108 PTL 0x00000001) @ 0x1fe9cfd8 ACPI: MCFG (v001 Sony V0 0x20051108 PTL 0x0000005f) @ 0x1fe9cf9c ACPI: SSDT (v001 Sony V0 0x20051108 PTL 0x20030224) @ 0x1fe983aa ACPI: SSDT (v001 Sony V0 0x20051108 PTL 0x20030224) @ 0x1fe97d0e ACPI: SSDT (v001 Sony V0 0x20051108 PTL 0x20030224) @ 0x1fe978c9 ACPI: SSDT (v001 Sony V0 0x20051108 PTL 0x20030224) @ 0x1fe976aa ACPI: SSDT (v001 Sony V0 0x20051108 PTL 0x20030224) @ 0x1fe97491 ACPI: DSDT (v001 Sony V0 0x20051108 PTL 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Detected 1729.210 MHz processor. Built 1 zonelists. Total pages: 129045 Kernel command line: root=/dev/sda1 mudur=language:tr init=/bin/bash mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1064 kB per task-struct memory footprint: 1200 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 510364k/522816k available (1530k kernel code, 11928k reserved, 704k data, 172k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdfe90000 ( 510 MB) .init : 0xc0334000 - 0xc035f000 ( 172 kB) .data : 0xc027eb6d - 0xc032ed18 ( 704 kB) .text : 0xc0100000 - 0xc027eb6d (1530 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3461.30 BogoMIPS (lpj=1730652) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 7k freed ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 000A) - 649 Objects with 60 Devices 190 Methods 21 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 10 Objects with 3 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 11 Objects with 3 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0007) - 1 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0008) - 10 Objects with 0 Devices 2 Methods 0 Regions ACPI Namespace successfully loaded at root c05a54b0 evxfevnt-0089 [02] enable : Transition to ACPI mode successful CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Total of 1 processors activated (3461.30 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:............................................................. Initialized 21/21 Regions 0/0 Fields 27/27 Buffers 13/21 Packages (695 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.. Executed 2 _INI methods requiring 1 _STA executions (examined 71 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO Boot video device is 0000:01:00.0 PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs *10) ACPI: PCI Interrupt Link [LNKE] (IRQs *10) ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *3 ACPI: PCI Interrupt Link [LNKG] (IRQs *10) ACPI: PCI Interrupt Link [LNKH] (IRQs *10) SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 90000000-afffffff PREFETCH window: c0000000-cfffffff PCI: Bus 7, cardbus bridge: 0000:06:05.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-33ffffff MEM window: 34000000-37ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: b0000000-b00fffff PREFETCH window: 30000000-33ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 17 Simple Boot Flag at 0x36 set to 0x1 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 18 (level, low) -> IRQ 18 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: MATSHITAUJ-832D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide st: Version 20061107, fixed bufsize 32768, s/g segs 256 SCSI Media Changer driver v0.25 ahci_init_one: ENTER ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: PORTS_IMPL is zero, forcing 0xf ahci_host_init: cap 0xc6127f03 port_map 0x5 n_ports 4 ahci_setup_port: ENTER, base==0xe081a400, port_idx 0 ahci_setup_port: base now==0xe081a500 ahci_setup_port: EXIT ahci_setup_port: ENTER, base==0xe081a400, port_idx 1 ahci_setup_port: base now==0xe081a580 ahci_setup_port: EXIT ahci_setup_port: ENTER, base==0xe081a400, port_idx 2 ahci_setup_port: base now==0xe081a600 ahci_setup_port: EXIT ahci_setup_port: ENTER, base==0xe081a400, port_idx 3 ahci_setup_port: base now==0xe081a680 ahci_setup_port: EXIT ahci_init_controller: PORT_SCR_ERR 0x4050000 ahci_init_controller: PORT_IRQ_STAT 0x0 ahci_init_controller: PORT_SCR_ERR 0x0 ahci_init_controller: PORT_IRQ_STAT 0x0 ahci_init_controller: PORT_SCR_ERR 0x0 ahci_init_controller: PORT_IRQ_STAT 0x0 ahci_init_controller: PORT_SCR_ERR 0x0 ahci_init_controller: PORT_IRQ_STAT 0x0 ahci_init_controller: HOST_CTL 0x80000000 ahci_init_controller: HOST_CTL 0x80000002 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part ata_device_add: ENTER ata_port_add: ENTER ata1: SATA max UDMA/133 cmd 0xE081A500 ctl 0x0 bmdma 0x0 irq 18 __ata_port_freeze: ata1 port frozen ata_port_add: ENTER ata2: SATA max UDMA/133 cmd 0xE081A580 ctl 0x0 bmdma 0x0 irq 18 __ata_port_freeze: ata2 port frozen ata_port_add: ENTER ata3: SATA max UDMA/133 cmd 0xE081A600 ctl 0x0 bmdma 0x0 irq 18 __ata_port_freeze: ata3 port frozen ata_port_add: ENTER ata4: SATA max UDMA/133 cmd 0xE081A680 ctl 0x0 bmdma 0x0 irq 18 __ata_port_freeze: ata4 port frozen ata_device_add: probe begin scsi0 : ahci ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata1: ata_port_flush_task: flush #2 ata1: ata_port_flush_task: EXIT ata_eh_autopsy: ENTER ata_eh_recover: ENTER ata_eh_prep_resume: ENTER ata_eh_prep_resume: EXIT __ata_port_freeze: ata1 port frozen ahci_softreset: ENTER ata_dev_classify: found ATA device by sig ahci_softreset: EXIT, class=1 ata_std_postreset: ENTER ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata_std_postreset: EXIT ata_eh_thaw_port: ata1 port thawed ata_eh_revalidate_and_attach: ENTER ata1.00: ata_dev_read_id: ENTER, host 1, dev 0 ata1: ata_dev_select: ENTER, ata1: device 0, wait 1 ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata1: ata_port_flush_task: flush #2 ata1: ata_port_flush_task: EXIT ata1.00: ata_dev_configure: ENTER, host 1, dev 0 ata1.00: ata_dev_configure: cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x001f ata_dump_id: 80==0x00f8 81==0x0021 82==0x346b 83==0x7f09 84==0x6063 ata_dump_id: 88==0x203f 93==0x0000 ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: ata_dev_configure: EXIT, drv_stat = 0x50 ata_eh_revalidate_and_attach: EXIT ata_eh_resume: ENTER ata_eh_resume: EXIT ata_dev_set_xfermode: set features - xfer mode ahci_interrupt: ENTER ahci_interrupt: port 0 ahci_interrupt: EXIT ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata1: ata_port_flush_task: flush #2 ata1: ata_port_flush_task: EXIT ata_dev_set_xfermode: EXIT, err_mask=0 ata1.00: ata_dev_read_id: ENTER, host 1, dev 0 ata1: ata_dev_select: ENTER, ata1: device 0, wait 1 ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata1: ata_port_flush_task: flush #2 ata1: ata_port_flush_task: EXIT ata1.00: ata_dev_configure: ENTER, host 1, dev 0 ata1.00: ata_dev_configure: cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x001f ata_dump_id: 80==0x00f8 81==0x0021 82==0x346b 83==0x7f09 84==0x6063 ata_dump_id: 88==0x203f 93==0x0000 ata1.00: ata_dev_configure: EXIT, drv_stat = 0x50 ata_dev_set_mode: xfer_shift=12, xfer_mode=0x45 ata1.00: configured for UDMA/100 ata_eh_suspend: ENTER ata_eh_suspend: EXIT ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT scsi1 : ahci ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata2: ata_port_flush_task: flush #2 ata2: ata_port_flush_task: EXIT ata_eh_autopsy: ENTER ata_eh_recover: ENTER ata_eh_prep_resume: ENTER ata_eh_prep_resume: EXIT __ata_port_freeze: ata2 port frozen ahci_softreset: ENTER ahci_softreset: PHY reports no device ata_std_postreset: ENTER ata2: SATA link down (SStatus 0 SControl 0) ata_std_postreset: EXIT, no device ata_eh_thaw_port: ata2 port thawed ata_eh_revalidate_and_attach: ENTER ata_eh_revalidate_and_attach: EXIT ata_eh_resume: ENTER ata_eh_resume: EXIT ata_eh_suspend: ENTER ata_eh_suspend: EXIT ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT scsi2 : ahci ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata3: ata_port_flush_task: flush #2 ata3: ata_port_flush_task: EXIT ata_eh_autopsy: ENTER ata_eh_recover: ENTER ata_eh_prep_resume: ENTER ata_eh_prep_resume: EXIT __ata_port_freeze: ata3 port frozen ahci_softreset: ENTER ahci_softreset: PHY reports no device ata_std_postreset: ENTER ata3: SATA link down (SStatus 0 SControl 300) ata_std_postreset: EXIT, no device ata_eh_thaw_port: ata3 port thawed ata_eh_revalidate_and_attach: ENTER ata_eh_revalidate_and_attach: EXIT ata_eh_resume: ENTER ata_eh_resume: EXIT ata_eh_suspend: ENTER ata_eh_suspend: EXIT ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT scsi3 : ahci ata_port_schedule_eh: port EH scheduled ata_scsi_error: ENTER ata_port_flush_task: ENTER ata_port_flush_task: flush #1 ata4: ata_port_flush_task: flush #2 ata4: ata_port_flush_task: EXIT ata_eh_autopsy: ENTER ata_eh_recover: ENTER ata_eh_prep_resume: ENTER ata_eh_prep_resume: EXIT __ata_port_freeze: ata4 port frozen ahci_softreset: ENTER ahci_softreset: PHY reports no device ata_std_postreset: ENTER ata4: SATA link down (SStatus 0 SControl 0) ata_std_postreset: EXIT, no device ata_eh_thaw_port: ata4 port thawed ata_eh_revalidate_and_attach: ENTER ata_eh_revalidate_and_attach: EXIT ata_eh_resume: ENTER ata_eh_resume: EXIT ata_eh_suspend: ENTER ata_eh_suspend: EXIT ata_eh_recover: EXIT, rc=0 ata_scsi_error: EXIT ata_device_add: host probe begin ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 24 00 00 00 cc ata_scsiop_inq_std: ENTER ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 60 00 00 00 cc ata_scsiop_inq_std: ENTER scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 cc ata_scsiop_noop: ENTER ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 24 ata_scsiop_mode_sense: ENTER SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 24 ata_scsiop_noop: ENTER ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 24 ata_scsiop_mode_sense: ENTER SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<3>ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_device_add: EXIT, returning 4 piix_init: pci_register_driver piix_init: done serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Using IPI Shortcut mode Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 41 00 00 02 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 3f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 47 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 57 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 6f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 10 97 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 172k freed ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 10 6f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 74 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 74 10 5f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 02 b4 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 02 b4 10 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 30 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 30 10 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 30 02 b7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c1 07 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 10 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 02 27 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 02 3f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 3a 1f 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c1 67 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c5 8f 00 00 90 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 18 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 18 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 3a 4f 00 00 38 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 7 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 7 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 3a 87 00 00 58 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 11 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 11 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 3a 3f 00 00 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 2 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 2 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 10 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c1 27 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c1 2f 00 00 38 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 7 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c1 6f 00 00 a0 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 20 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 7 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 20 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 05 1f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 62 80 5f 00 00 28 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 5 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 62 81 57 00 00 40 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 8 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 5 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 8 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 62 81 97 00 00 a0 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 20 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 20 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 02 17 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 6a 57 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 6a 77 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 6a 7f 00 00 40 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 8 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 8 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 6a bf 00 02 18 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 67 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 67 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 62 82 37 00 00 38 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 7 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 7 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 3c 37 00 00 18 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 3 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 3 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 79 57 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 79 77 00 00 28 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 5 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2e 57 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 5 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2e 77 00 04 00 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 128 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 32 77 00 02 a0 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 84 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 37 3f 00 02 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 66 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 128 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 84 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 66 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c4 b7 00 00 d8 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 27 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 27 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 e0 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 e0 10 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 74 10 6f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c2 f7 00 01 00 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 32 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 32 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c3 f7 00 00 b0 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 22 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 22 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c2 0f 00 00 c8 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 25 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 25 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 06 c7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 00 67 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 82 2f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 02 1f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 02 37 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2e 17 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2e 37 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 72 f7 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 73 17 00 00 18 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 3 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 1e 67 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 3 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2a f7 00 00 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 2 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 2 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2b 07 00 00 30 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 6 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 6 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 78 87 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1d 78 a7 00 00 28 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 5 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 5 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1c 02 2f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2d cf 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 2d ef 00 00 28 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 5 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 5 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 01 ff 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 62 c0 d7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c2 d7 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 01 b7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 31 5f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 31 97 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 31 9f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 44 03 37 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 46 40 6f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 00 af 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 12 df 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 31 c4 a7 00 00 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 2 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 2 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b0 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b0 10 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 d4 01 e7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 d4 c1 27 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 d4 01 ef 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 d4 c1 7f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 d4 c1 87 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b0 00 7f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b0 1f ef 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 3b 8f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b0 00 77 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b0 19 a7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b2 48 37 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b4 f1 0f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b4 f9 97 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 05 0f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 09 3f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 09 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 11 a7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 22 9f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b5 3f 27 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b8 76 37 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 01 b9 9e 5f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c1 d7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c1 e7 00 00 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 2 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c1 ff 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 2 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 07 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 17 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 27 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 57 00 00 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 2 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 2 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 67 00 00 18 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 3 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 3 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 29 67 00 00 20 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 4 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 4 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 29 87 00 00 18 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 3 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 3 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 1e 29 9f 00 00 18 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 3 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 3 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 01 cf 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 61 03 a7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 01 c7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 62 c0 3f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT EXT3-fs warning: maximal mount count reached, running e2fsck is recommended ata_scsi_dump_cdb: CDB (1:0,0,0) 2a 00 00 00 00 3f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT EXT3 FS on sda1, internal journal ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 00 47 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 06 a7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 60 00 3f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 2a 00 00 00 10 97 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 2a 00 04 60 aa 87 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 2a 00 00 00 10 9f 00 00 48 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 9 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 9 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 2a 00 00 00 10 e7 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 04 32 c2 bf 00 00 10 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 2 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 2 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 84 00 47 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 84 00 4f 00 00 08 ata_scsi_translate: ENTER scsi_10_lba_len: ten-byte command ata_sg_setup: ENTER, ata1 ata_sg_setup: 1 sg elements mapped ahci_fill_sg: ENTER ata_scsi_translate: EXIT ahci_interrupt: ENTER ata_sg_clean: unmapping 1 sg elements ahci_interrupt: port 0 ahci_interrupt: EXIT 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation Unknown device 81b7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 90000000-afffffff Prefetchable memory behind bridge: c0000000-cfffffff Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Sony Corporation Unknown device 81cc Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at 80000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1800 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1820 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 177 I/O ports at 1840 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1860 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 209 Memory at 80004000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0000000-b00fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 1880 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation Unknown device 81ba Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 201 I/O ports at 18c0 [size=8] I/O ports at 18b8 [size=4] I/O ports at 18b0 [size=8] I/O ports at 1894 [size=4] I/O ports at 18a0 [size=16] Memory at 80004400 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) Subsystem: Sony Corporation Unknown device 81b9 Flags: medium devsel I/O ports at 18e0 [size=32] 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go 6200 TurboCache] (rev a1) (prog-if 00 [VGA]) Subsystem: Sony Corporation Unknown device 81eb Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at a0000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at 90000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 91000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting 06:05.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller Subsystem: Sony Corporation Unknown device 818f Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 06:05.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation Unknown device 818f Flags: bus master, medium devsel, latency 32, IRQ 233 Memory at b0004000 (32-bit, non-prefetchable) [size=2K] Memory at b0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 06:05.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller Subsystem: Sony Corporation Unknown device 8190 Flags: bus master, medium devsel, latency 57, IRQ 10 Memory at b0005000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03) Subsystem: Sony Corporation Unknown device 81d0 Flags: bus master, medium devsel, latency 66, IRQ 233 Memory at b0006000 (32-bit, non-prefetchable) [size=4K] I/O ports at 2000 [size=64] Capabilities: [dc] Power Management version 2 06:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) Subsystem: Intel Corporation Unknown device 2753 Flags: bus master, medium devsel, latency 32, IRQ 50 Memory at b0007000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
