Linux IDE
[Prev Page][Next Page]
- Re: What to do about the 2TB limit on HDIO_GETGEO ?, (continued)
- [PATCH v2 3/5] libata: use scsi_build_sense_buffer,
FUJITA Tomonori
- [PATCH 1/5] mpc8xx-ide: use ide_find_port(),
Bartlomiej Zolnierkiewicz
- Burning CDs as user produces coasters (Plextor drive),
Gregor Jasny
- [PATCH 3/3] ide: remove obsoleted "ide=" kernel parameters,
Bartlomiej Zolnierkiewicz
- [PATCH 2/3] ide: add "noacpi" / "acpigtf" / "acpionboot" parameters,
Bartlomiej Zolnierkiewicz
- [PATCH 1/3] gayle: add "doubler" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH #upstream-fixes] libata: improve HPA error handling,
Tejun Heo
- [PATCH #upstream-fixes] libata: assume no device is attached if both IDENTIFYs are aborted,
Tejun Heo
- [PATCH 1/8] ide: always auto-tune PIO in legacy VLB host drivers,
Bartlomiej Zolnierkiewicz
- [PATCH] ide: add "ignore_cable" parameter (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH 3/3] ide: remove obsoleted "idebus=" kernel parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 2/3] ide: mark "idebus=" kernel parameter as obsoleted (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH 1/3] ide: add "vlb|pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH] ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: Documentation/ide/ide.txt fixes,
Bartlomiej Zolnierkiewicz
- [PATCH 2.6.25-rc6] sata_promise: fix hardreset hotplug quirk,
Mikael Pettersson
- Re: 2.6.25-rc6-git6: Reported regressions from 2.6.24,
Jeff Garzik
- [Bug 10296] New: System freezes after I/O on pata_jmicron device,
bugme-daemon
- Re: 2.6.24.3: regular sata drive resets - worrisome?,
Andrew Morton
- Re: Fw: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- AHCI SATA DVD writing issue,
davor emard
- ide_cd modifies hard_* members of request,
Nikanth Karthikesan
- [PATCH 0/17] ide-tape: remove pipeline functionality-v3,
Borislav Petkov
- [PATCH 02/17] ide-tape: remove unused parameter from idetape_copy_stage_from_user,
Borislav Petkov
- [PATCH 05/17] ide-tape: remove pipeline-specific code in idetape_space_over_filemarks(),
Borislav Petkov
- [PATCH 01/17] ide-tape: remove unused parameter from idetape_copy_stage_to_user,
Borislav Petkov
- [PATCH 06/17] ide-tape: remove idetape_pipeline_size(),
Borislav Petkov
- [PATCH 09/17] ide-tape: unwrap idetape_queue_pc_tail(),
Borislav Petkov
- [PATCH 03/17] ide-tape: remove idetape_discard_read_pipeline(),
Borislav Petkov
- [PATCH 04/17] ide-tape: remove idetape_empty_write_pipeline(),
Borislav Petkov
- [PATCH 13/17] ide-tape: remove pipelined mode tape control flags,
Borislav Petkov
- [PATCH 08/17] ide-tape: remove pipeline-specific code from idetape_end_request(),
Borislav Petkov
- [PATCH 07/17] ide-tape: remove idetape_remove_stage_head(),
Borislav Petkov
- [PATCH 10/17] ide-tape: remove remaining pipeline functionality,
Borislav Petkov
- [PATCH 11/17] ide-tape: remove pipeline-specific code from idetape_setup,
Borislav Petkov
- [PATCH 14/17] ide-tape: remove pipeline-specific members from struct ide_tape_obj,
Borislav Petkov
- [PATCH 16/17] ide-tape: remove pipelined mode description from Documentation/ide/ide-tape.txt,
Borislav Petkov
- [PATCH 15/17] ide-tape: remove misc references to pipelined operation in the comments,
Borislav Petkov
- [PATCH 17/17] ide-tape: remove comments markup from Documentation/ide/ide-tape.txt,
Borislav Petkov
- [PATCH 12/17] ide-tape: remove pipelined mode parameters,
Borislav Petkov
- Re: [PATCH 0/17] ide-tape: remove pipeline functionality-v3,
Bartlomiej Zolnierkiewicz
- [PATCH 1/1] IDE: fix ide.h compiler warning,
Jiri Slaby
- [PATCH] ide: remove IDE devices from /proc/ide/ before unregistering them,
Bartlomiej Zolnierkiewicz
- [RFC] Read/Write Buffer support,
Matthew Wilcox
- Marvell 6141 support,
Andy Sturrock
- Re: [PATCH] hid, 2.6.23 - add support for new macbook and apple aluminum keyboard "fn" key,
Tobias Müller
- [PATCH 1/12] ali14xx: add "vlb_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 2/12] ht6560b: add "vlb_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 3/12] qd65xx: add "vlb_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 4/12] aec62xx: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 5/12] alim15x3: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 6/12] amd74xx: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 7/12] cmd64x: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 8/12] cy82c693: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 9/12] opti621: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 10/12] via82cxxx: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 11/12] cmd640: add "cmd_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 12/12] ide: mark "idebus=" kernel parameter as obsoleted,
Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/12] ali14xx: add "vlb_clock=" parameter,
Alan Cox
- Re: Useful benchmarking tools for RAID,
Richard Scobie
- [Bug 10239] New: PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [BUG] PLEXTOR DVDR PX-740A drive not ready for command,
Richard Genoud
- RE: NCQ change on 2007-12-07,
Lanstein, Alex C
- [PATCH libata-dev#upstream-fixes] libata-acpi: improve dock event handling,
Tejun Heo
- Re: Remove obsoleted "idex=noprobe" kernel parameter,
Rus V. Brushkoff
- [2.6.25] scsi mid layer: add a time threshold to force device to completed command queued for a long time.,
Gwendal Grignou
- [PATCH 4/6] ide: use clamp_val macro instead of FIT macro,
Harvey Harrison
- [PATCH 3/6] ata: use clamp_val macro instead of FIT macro,
Harvey Harrison
- [PATCH 3/3] ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted,
Bartlomiej Zolnierkiewicz
- [PATCH 2/3] ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted,
Bartlomiej Zolnierkiewicz
- [PATCH 1/3] ide: remove obsoleted "hdx=noautotune" kernel parameter,
Bartlomiej Zolnierkiewicz
- [PATCH] ide: remove obsoleted "idex=" kernel parameters,
Bartlomiej Zolnierkiewicz
- [PATCH] ide: remove obsoleted "idex=noprobe" kernel parameter (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters (take 2),
Bartlomiej Zolnierkiewicz
- [Bug 10225] New: 80-wire cable detection failed for SAMSUNG SP0822N,
bugme-daemon
- nVidia MCP55 SATA hotplug support?,
Mourad De Clerck
- Marvell 6121 SATA support?,
Mourad De Clerck
- [Build Failure] 2.6.25-rc5-mm1 Build fails with allmodconfig probe_4drives undefined,
Kamalesh Babulal
- [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Tejun Heo
- [PATCH 1/9] libata: reorganize ata_port_operations,
Tejun Heo
- [PATCH 2/9] libata: implement and use ata_noop_irq_clear(),
Tejun Heo
- [PATCH 4/9] libata: implement and use SHT initializers,
Tejun Heo
- [PATCH 3/9] libata: normalize port_info, port_operations and sht tables,
Tejun Heo
- [PATCH 8/9] libata: kill port_info->sht and ->irq_handler,
Tejun Heo
- [PATCH 7/9] libata: stop overloading port_info->private_data,
Tejun Heo
- [PATCH 9/9] libata: make reset related methods proper port operations,
Tejun Heo
- [PATCH 6/9] libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht,
Tejun Heo
- [PATCH 5/9] libata: implement and use ops inheritance,
Tejun Heo
- Re: [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Mark Lord
- Re: [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Tejun Heo
- Re: [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Jeff Garzik
- [PATCH libata-dev#upstream-fixes] libata: PCI device should be powered up before being accessed,
Tejun Heo
- [PATCH] devres: implement pcim_iomap_regions_request_all(),
Tejun Heo
- [PATCHSET #upstream-fixes] block/libata: update and use block layer padding and draining, take 3,
Tejun Heo
- [PATCHSET libata-dev#upstream] libata: prefer hardreset, take #2,
Tejun Heo
- [PATCH #upstream-fixes] libata: use atapi_cmd_type() to determine cmd type instead of transfer size,
Tejun Heo
- [PATCH 5/5] ide: remove obsoleted "idex=reset" kernel parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 4/5] ide: remove obsoleted "idex=serialize" kernel parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 3/5] ide: add "ignore_cable" kernel parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 2/5] ide: mark special "ide0=" kernel parameters as obsoleted,
Bartlomiej Zolnierkiewicz
- [PATCH 1/5] ide: remove commented out entries from ide_pio_blacklist[],
Bartlomiej Zolnierkiewicz
- Re: [PATCH 00/10] sg buffer copy helper functions,
FUJITA Tomonori
- pata_via/libata.force fails forcing mwdma/pio modes,
Erik Inge Bolsø
- [Bug 10216] New: kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- [Bug 10216] kernel from different versions hangs with some CD/DVD drives,
bugme-daemon
- 2.6.25-rc4 oops using hdparm --write-sector,
George Spelvin
- [PATCH] ATA: logical-bitwise and confusion in ahci_save_initial_config(),
Roel Kluin
- 2.6.24.X: SATA/AHCI related boot delay.,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay.,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay.,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay.,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Jeff Garzik
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Hemmann, Volker Armin
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Hemmann, Volker Armin
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Hemmann, Volker Armin
- RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Peer Chen
- Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Volker Armin Hemmann
- [PATCH 0/4] ide-tape: remove pipeline functionality-v2,
Borislav Petkov
- [PATCH 3/4] ide: add struct ide_dma_ops,
Bartlomiej Zolnierkiewicz
- [PATCH 4/4] ide: constify struct ide_dma_ops,
Bartlomiej Zolnierkiewicz
- [PATCH 2/4] ide: add IDE_HFLAG_SERIALIZE_DMA host flag,
Bartlomiej Zolnierkiewicz
- [PATCH 1/4] sl82c105: check bridge revision in sl82c105_init_one(),
Bartlomiej Zolnierkiewicz
- [PATCH 5/7] sgiioc4: use ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 6/7] palm_bk3710: use ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 7/7] au1xxx-ide: use ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 4/7] icside: use ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 3/7] ide-pmac: use ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 2/7] ide: do complete DMA setup in ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 1/7] au1xxx-ide: fix MWDMA support,
Bartlomiej Zolnierkiewicz
- [PATCH #upstream-fixes] libata: don't allow sysfs read access to force param,
Tejun Heo
- 2.6.25-rc4 IDE BUG(),
George Spelvin
- [Regression] 2.6.25-rc4-git3: Handling of audio CDs broken on pata_ali,
Rafael J. Wysocki
- [PATCH 7/7] ide: cleanup ide_setup_dma(),
Bartlomiej Zolnierkiewicz
- [PATCH 4/7] ide: move ide_setup_dma() call out from ->init_dma method,
Bartlomiej Zolnierkiewicz
- [PATCH 6/7] ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma(),
Bartlomiej Zolnierkiewicz
- [PATCH 5/7] ide: export ide_allocate_dma_engine(),
Bartlomiej Zolnierkiewicz
- [PATCH 3/7] alim15x3: skip DMA initialization completely on revs < 0x20,
Bartlomiej Zolnierkiewicz
- [PATCH 2/7] pdc202xx_old: remove init_dma_pdc202xx(),
Bartlomiej Zolnierkiewicz
- [PATCH 1/7] ide: don't display "BIOS" settings in ide_setup_dma(),
Bartlomiej Zolnierkiewicz
- Frequent ATA errors,
LCID Fire
- [Bug 10185] New: Commit 9f10d9ee breaks CD mounting/burning,
bugme-daemon
- Correct use of ap->lock versus ap->host->lock ?,
Mark Lord
- [PATCH] ahci: add the Device IDs of nvidia MCP7B AHCI controller to ahci.c,
peerchen
- [PATCH] Add support for the RB500 PATA CompactFlash,
Florian Fainelli
- Amateur redhead and brunette teens parallelinerved,
Molly Wood
- [PATCH] pata_ixp4xx_cf: support single chip-select operation,
Hamish Moffatt
- [PATCH #upstream-fixes 1/2] libata: allow LLDs w/o any reset method,
Tejun Heo
- [PATCH 02/16] ata: replace remaining __FUNCTION__ occurrences,
Harvey Harrison
- Commit 9f10d9ee breaks CD mounting/burning,
walt
- [PATCH 1/3] ide: remove ->extra field from struct ide_port_info,
Bartlomiej Zolnierkiewicz
- [PATCH 2/3] ide: remove ide_dma_iobase(),
Bartlomiej Zolnierkiewicz
- [PATCH 3/3] ide: remove ->cds field from ide_hwif_t,
Bartlomiej Zolnierkiewicz
- SATA HDD password problem,
Rus V. Brushkoff
- [patch 1/3] libata: isolate and rework cable logic,
akpm
- [patch 3/3] pata: "I do not think it means, what you think it means.",
akpm
- [patch 2/3] pata_amd: fix sparse warning,
akpm
- hdparm -W 0 2.6.24.3 causing XFS shutdown on IO Error,
Jeremy Jackson
- [PATCH 09/14] ide: replace remaining __FUNCTION__ occurrences,
Harvey Harrison
- [PATCH 2/2] ide: update references to Documentation/ide/ide.txt,
Randy Dunlap
- [PATCH 1/2] ide: move ide.txt to Documentation/ide/,
Randy Dunlap
- locking problem in sata_sil24?,
Rune Torgersen
- [PATCH] libata,libsas: expose ata_sas_change_queue_depth() and use it,
James Bottomley
- [PATCH] libata: update port initialisation for SAS call in,
James Bottomley
- [Bug 10159] New: 2.6.25-rc2 IDE + smartd = hang,
bugme-daemon
- Re: [BUG] 2.6.25-rc2-git3 broke cdrecord,
James Bottomley
- ide_register_hw(): buggy code,
Adrian Bunk
- [Bug 10142] New: DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- [Bug 10142] DMA crash with via82cxxx module,
bugme-daemon
- Setting up md-raid5: observations, errors, questions,
Christian Pernegger
- [PATCH 7/9] ide: manage resources for PCI devices in ide_pci_enable(),
Bartlomiej Zolnierkiewicz
- [PATCH 8/9] ide: remove ide_hwif_request_regions(),
Bartlomiej Zolnierkiewicz
- [PATCH 9/9] ide: cleanup setting hwif->mmio flag,
Bartlomiej Zolnierkiewicz
- [PATCH 6/9] cmd640: manage I/O resources in driver,
Bartlomiej Zolnierkiewicz
- [PATCH 5/9] ide: manage I/O resources in ide_legacy_init_one(),
Bartlomiej Zolnierkiewicz
- [PATCH 4/9] ide: add ide_legacy_init_one() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 3/9] ide_arm: manage I/O resources in driver,
Bartlomiej Zolnierkiewicz
- [PATCH 1/9] ide-generic: manage I/O resources in driver,
Bartlomiej Zolnierkiewicz
- [PATCH 2/9] ide-4drives: manage I/O resources in driver,
Bartlomiej Zolnierkiewicz
- [PATCH] ide: register ports with non-present devices (for warm-plug),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: use ide_legacy_device_add() for qd65xx (take 2),
Bartlomiej Zolnierkiewicz
- [RFC: 2.6 patch] libata-scsi.c: possible cleanups,
Adrian Bunk
- [RFC: 2.6 patch] libata-core.c: possible cleanups,
Adrian Bunk
- [RFC: 2.6 patch] make ata_eh_qc_retry() static,
Adrian Bunk
- [PATCH 00/24] ide-tape: remove pipelined mode operation,
Borislav Petkov
- [PATCH 20/24] ide-tape: remove pipelined mode tape control flags,
Borislav Petkov
- [PATCH 14/24] ide-tape: remove __idetape_discard_read_pipeline,
Borislav Petkov
- [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request,
Borislav Petkov
- [PATCH 08/24] ide-tape: remove pipeline-specific code from idetape_space_over_filemarks,
Borislav Petkov
- [PATCH 23/24] ide-tape: remove pipelined mode description from Documentation/ide/ide-tape.txt,
Borislav Petkov
- [RFCPATCH 10/24] ide-tape: remove pipeline-specific code from idetape_chrdev_ioctl,
Borislav Petkov
- [PATCH 22/24] ide-tape: remove misc references to pipelined operation in the comments,
Borislav Petkov
- [PATCH 24/24] ide-tape: remove comments markup from Documentation/ide/ide-tape.txt,
Borislav Petkov
- [PATCH 04/24] ide-tape: remove pipeline-specific code from idetape_chrdev_write,
Borislav Petkov
- [PATCH 11/24] ide-tape: remove pipeline-specific code from idetape_blkdev_ioctl,
Borislav Petkov
- [PATCH 16/24] ide-tape: remove idetape_calculate_speeds,
Borislav Petkov
- [PATCH 09/24] ide-tape: remove pipeline-specific code from idetape_mtioctop,
Borislav Petkov
- [PATCH 15/24] ide-tape: remove pipeline-specific code from idetape_end_request,
Borislav Petkov
- [PATCH 17/24] ide-tape: remove pipeline-specific code from idetape_chrdev_open,
Borislav Petkov
- [PATCH 18/24] ide-tape: remove pipeline-specific code from idetape_setup,
Borislav Petkov
- [PATCH 05/24] ide-tape: cleanup pipeline-specific code from idetape_init_read,
Borislav Petkov
- [PATCH 21/24] ide-tape: remove pipeline-specific members from struct ide_tape_obj,
Borislav Petkov
- [PATCH 06/24] ide-tape: remove unused stage-parameter from idetape_copy_stage_to_user,
Borislav Petkov
- [PATCH 19/24] ide-tape: remove pipelined mode parameters,
Borislav Petkov
- [PATCH 07/24] ide-tape: remove pipeline-specific code bits from idetape_chrdev_read,
Borislav Petkov
- [PATCH 13/24] ide-tape: remove pipeline-specific code from idetape_chrdev_release,
Borislav Petkov
- [PATCH 01/24] ide-tape: remove idetape_pipeline_active(),
Borislav Petkov
- [PATCH 03/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_read_request,
Borislav Petkov
- [PATCH 12/24] ide-tape: remove idetape_empty_write_pipeline,
Borislav Petkov
- Re: [PATCH 00/24] ide-tape: remove pipelined mode operation,
Jens Axboe
- Re: [PATCH 00/24] ide-tape: remove pipelined mode operation,
Adrian Bunk
- [git patches] libata fixes, and release notes,
Jeff Garzik
- [RFC PATCH] libata: PIO via bounce buffer,
Alan Cox
- devres and requesting resources,
Jeff Garzik
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
