Hans-Peter Jansen wrote:
Am Sonntag, 30. März 2008 schrieb Tejun Heo:
Hello,
Hans-Peter Jansen wrote:
Should I be worried? smartd doesn't show anything suspicious on
those.
Can you please post the result of "smartctl -a /dev/sdX"?
Here's the last smart report from two of the offending drives. As noted
before, I did the hardware reorganization, replaced the dog slow 3ware
9500S-8 and the SiI 3124 with a single Areca 1130 and retired the
drives for now, but a nephew already showed interest. What do you
think, can I cede those drives with a clear conscience? The
Hardware_ECC_Recovered values are really worrisome, aren't they?
Different vendors use different scales for the raw values. The value is
still pegged at the highest so it could be those raw values are okay or
that the vendor just doesn't update value field accordingly. My P120
says 0 for the raw value and 904635 for hardware ECC recovered so there
is some difference. What do other non-failing drives say about those
values?
The only non-failing drive was sdf as it was running in standby mode in this
md raid 5 ensemble:
20080323-011337-sdc.log:195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 162956700
20080323-011337-sdc.log:196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
20080323-011337-sdc.log:197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
20080323-011337-sdc.log:198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
20080323-011337-sdc.log:199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
20080323-011338-sdd.log:195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 162520674
20080323-011338-sdd.log:196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
20080323-011338-sdd.log:197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
20080323-011338-sdd.log:198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
20080323-011338-sdd.log:199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
20080323-011338-sde.log:195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 148429049
20080323-011338-sde.log:196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
20080323-011338-sde.log:197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
20080323-011338-sde.log:198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
20080323-011338-sde.log:199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
20080323-011339-sdf.log:195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1559
20080323-011339-sdf.log:196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
20080323-011339-sdf.log:197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
20080323-011339-sdf.log:198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
20080323-011339-sdf.log:199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
Hmmm... If the drive is failing FLUSHs, I would expect to see elevated
reallocation counters and maybe some pending counts. Aieee.. weird.
But there are no reallocations nor any pending sectors on any of them.
It's been 4 samsung drives at all hanging on a sata sil 3124:
FLUSH_EXT timing out usually indicates that the drive is having
problem writing out what it has in its cache to the media. There was
one case where FLUSH_EXT timeout was caused by the driver failing to
switch controller back from NCQ mode before issuing FLUSH_EXT but that
was on sata_nv. There hasn't been any similar problem on sata_sil24.
Hmm, I didn't noticed any data distortions, and if there where, they
live on as copies in their new home..
It should have appeared as read errors. Maybe the drive successfully
^^^^
write (I guess)
wrote those sectors after 30+ secs timeout.
That would point to some driver issue, wouldn't it? Roger Heflin also
experienced similar behavior with that controller, which wasn't
reproducible with another.
I can offer to you rebuilding that md in a test environment, and giving
you access to it, if you're interested.
Anyway, thanks for caring Tejun,
Pete
Here are the errors I get, though look at it closer, I am don't appear to be
getting the reset, just this error from time to time:
sd 9:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
sd 9:0:0:0: [sde] Write Protect is off
sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
ata8.00: BMDMA2 stat 0x687d8009
ata8.00: cmd 25/00:80:a7:00:1d/00:01:1d:00:00/e0 tag 0 cdb 0x0 data 196608 in
res 51/04:8f:98:01:1d/00:00:1d:00:00/f0 Emask 0x1 (device error)
ata8.00: configured for UDMA/100
ata8: EH complete
sd 7:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
I have 4 identical disks, with all 4 connected to the SIL controller all give
some errors, moving 2 of the disks to a promise controller makes the errors go
away on the 2 connected to the promise controller. All drives are part of a
software raid5 array.
Startup looks like this:
sata_sil 0000:00:09.0: version 2.3
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 20
sata_sil 0000:00:09.0: Applying R_ERR on DMA activate FIS errata fix
scsi7 : sata_sil
scsi8 : sata_sil
scsi9 : sata_sil
scsi10 : sata_sil
ata8: SATA max UDMA/100 cmd 0xf8942080 ctl 0xf894208a bmdma 0xf8942000 irq 20
ata9: SATA max UDMA/100 cmd 0xf89420c0 ctl 0xf89420ca bmdma 0xf8942008 irq 20
ata10: SATA max UDMA/100 cmd 0xf8942280 ctl 0xf894228a bmdma 0xf8942200 irq 20
ata11: SATA max UDMA/100 cmd 0xf89422c0 ctl 0xf89422ca bmdma 0xf8942208 irq 20
Right now I am running 2.6.23.15-80.fc7, but have also got the errors under 2.6.23.1
Roger
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
