Linux IDE
[Prev Page][Next Page]
Re: No IDE drivers loaded for Toshiba Satellite 320 CDS,
Ondrej Zary
[PATCH #upstream-fixes 1/2] libata: uninline atapi_cmd_type(),
Tejun Heo
Re: Again... DMA speed too slow,
Andrew Morton
Re: [Bugme-new] [Bug 10379] New: when unloading ahci driver on ATI SB700 controller and Western digital cavier 160 GB Hard drive cache is not flushed to the media,
Andrew Morton
2.5.25 regression from 2.6.24: smartctl fails to access drive,
Gordon Farquharson
[PATCH #upstrema-fixes] libata: fix IDENTIFY order in ata_bus_probe(),
Tejun Heo
[PATCH 0/5] sata_mv cleanups,
Mark Lord
[Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- <Possible follow-ups>
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugme-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugzilla-daemon
- [Bug 10370] mount failed on ubuntu-8.04_ppc,
bugzilla-daemon
[2.6.25 patch] ide/legacy/q40ide.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/legacy/macide: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/legacy/falconide.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/legacy/buddha.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/legacy/gayle.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/h8300/ide-h8300.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/cris/ide-cris.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/arm/ide_arm.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/ppc/pmac.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/ppc/mpc8xx.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide/pci/cmd640.c: add MODULE_LICENSE,
Adrian Bunk
[2.6.25 patch] ide-pnp.c: add MODULE_LICENSE,
Adrian Bunk
[2.6 patch] libata-acpi.c: remove unneeded #if's,
Adrian Bunk
[PATCH 4/6] ide-h8300: add ->{in,out}put_data methods,
Bartlomiej Zolnierkiewicz
[PATCH 6/6] ide: remove ->INS{W,L} and ->OUTS{W,L} methods,
Bartlomiej Zolnierkiewicz
[PATCH 5/6] ide: add IDE_HFLAG_MMIO host flag,
Bartlomiej Zolnierkiewicz
[PATCH 1/6] ide: merge ->atapi_*put_bytes and ->ata_*put_data methods,
Bartlomiej Zolnierkiewicz
[PATCH 2/6] scc_pata: add ->{in,out}put_data methods,
Bartlomiej Zolnierkiewicz
[PATCH 3/6] au1xxx-ide: add ->{in,out}put_data methods,
Bartlomiej Zolnierkiewicz
[PATCH 4/5] ide: add struct ide_io_ports,
Bartlomiej Zolnierkiewicz
[PATCH 5/5] falconide/q40ide: add ->atapi_*put_bytes and ->ata_*put_data methods,
Bartlomiej Zolnierkiewicz
[PATCH 3/5] ide: make 32-bit I/O support for IDE VLB available only when it makes sense,
Bartlomiej Zolnierkiewicz
[PATCH 2/5] ide: use ->ata_input_data in ide_driveid_update(),
Bartlomiej Zolnierkiewicz
[PATCH 1/5] ide-h8300: 32-bit I/O is unsupported,
Bartlomiej Zolnierkiewicz
Re: linux-next: Tree for March 29,
Haavard Skinnemoen
[PATCH] ide: fix defining SUPPORT_VLB_SYNC,
Bartlomiej Zolnierkiewicz
[PATCH] Revert "ide: change master/slave IDENTIFY order",
Bartlomiej Zolnierkiewicz
[PATCH 0/5] ide-tape: refit tape data buffer bits/kill pipelining,
Borislav Petkov
Analysis of EH on Andi's dying disk and stuff to discuss about,
Tejun Heo
System reboots after insertion and removal of disks in 2.6.18 kernel,
Sagar Borikar
[patch 1/2] pata_atiixp: simplex clear,
akpm
[patch 2/3] libata: isolate and rework cable logic,
akpm
[patch 2/2] pata_amd: fix sparse warning,
akpm
[patch 3/3] ata: SWNCQ should be enabled by default,
akpm
[patch 1/3] git-libata: fix CONFIG_PCI=n build,
akpm
[PATCH 3/3] sata_fsl: reduce compatibility to fsl,pq-sata,
Kim Phillips
SATA Tape drive problems.,
Russell Brown
Need help understanding SATA error message.,
Tomas Lund
Yet more wiki: libata version history,
Jeff Garzik
SATA hardware features table,
Jeff Garzik
Understanding libata error messages,
Jeff Garzik
<Possible follow-ups>
Re: Understanding libata error messages,
Robert Hancock
Linux ATA support now has a wiki,
Jeff Garzik
[PATCH #upstream] pata_scc: fix compile warning,
Tejun Heo
[PATCHSET #upstream] libata: improve FLUSH error handling,
Tejun Heo
[PATCH #upstream-fixes] libata: ATA_EHI_LPM should be ATA_EH_LPM,
Tejun Heo
[patch for 2.6.25? 1/1] pata_sil680: only enable MMIO on Cell blades,
akpm
Re: linux-next: Tree for March 26 (ATA),
Randy Dunlap
[PATCH] pata_atiixp: Simplex clear,
Alan Cox
[PATCH #upstream] ata_piix: don't attach to ICH6M in ahci mode,
Tejun Heo
get device sysfs path ioctl (was: Re: What to do about the 2TB limit on HDIO_GETGEO ?),
Dan Williams
[PATCH] pata_sil680: Only enable MMIO on Cell blades,
Benjamin Herrenschmidt
Re: some minor issues with 2.6.25-rc6-git7-default,
Andrew Morton
[patch 0/2] libata: power usage patches,
Kristen Carlson Accardi
[patch 2/2] libata: power off unused ports,
Kristen Carlson Accardi
[patch 1/2] ahci: Dont start port DMA engines unless a device is present,
Kristen Carlson Accardi
linux/libata.h/ata_busy_wait() inefficiencies?,
Andreas Mohr
[PATCHSET #upstream] libata: modularize PMP support, take #1,
Tejun Heo
[PATCHSET #upstream] libata: modularize SFF support, take #1,
Tejun Heo
- [PATCH 04/27] libata: move ata_pci_default_filter() out of CONFIG_PCI,
Tejun Heo
- [PATCH 01/27] libata: drop ata_dev_select() from ata_dev_read_id,
Tejun Heo
- [PATCH 02/27] libata: reorder functions in libata-sff.c,
Tejun Heo
- [PATCH 07/27] libata: rename SFF functions,
Tejun Heo
- [PATCH 10/27] libata: separate out ata_std_prereset() from ata_sff_prereset(),
Tejun Heo
- [PATCH 11/27] libata: separate out ata_std_postreset() from ata_sff_postreset(),
Tejun Heo
- [PATCH 12/27] libata: restructure SFF post-reset readiness waits,
Tejun Heo
- [PATCH 09/27] libata: clean up port_ops->sff_irq_clear(),
Tejun Heo
- [PATCH 06/27] libata: kill ata_chk_status(),
Tejun Heo
- [PATCH 15/27] libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset(),
Tejun Heo
- [PATCH 03/27] libata: reorganize SFF related stuff,
Tejun Heo
- [PATCH 20/27] libata: add qc_fill_rtf port operation,
Tejun Heo
- [PATCH 22/27] libata: replace tf_read with qc_fill_rtf for non-SFF drivers,
Tejun Heo
- [PATCH 08/27] libata: rename SFF port ops,
Tejun Heo
- [PATCH 19/27] libata: unify mechanism to request follow-up SRST,
Tejun Heo
- [PATCH 14/27] ahci: use ata_wait_after_reset() instead of ata_sff_wait_ready(),
Tejun Heo
- [PATCH 23/27] libata: remove check_status from non-SFF drivers,
Tejun Heo
- [PATCH 25/27] libata: clean up dummy port_ops,
Tejun Heo
- [PATCH 26/27] libata: don't use ap->ioaddr in non-SFF drivers,
Tejun Heo
- [PATCH 05/27] libata: kill ata_chk_status() call from ata_dev_configure(),
Tejun Heo
- [PATCH 27/27] libata: make SFF support optional,
Tejun Heo
- [PATCH 17/27] libata: clear SError after link resume,
Tejun Heo
- [PATCH 13/27] libata: separate out ata_wait_ready() and implement ata_wait_after_reset(),
Tejun Heo
- [PATCH 16/27] libata: implement and use sata_std_hardreset(),
Tejun Heo
- [PATCH 18/27] libata: move PMP SCR access failure during reset to ata_eh_reset(),
Tejun Heo
- [PATCH 24/27] libata: kill ata_noop_dev_select(),
Tejun Heo
- [PATCH 21/27] libata: drop @finish_qc from ata_qc_complete_multiple(),
Tejun Heo
[PATCH #upstream 1/3] libata/pdc_adma: make SFF EH handle non-bmdma SFF drivers and standardize pdc_adma ops,
Tejun Heo
[PATCH] ata-acpi: don't call _GTF for disabled drive,
Shaohua Li
What to do about the 2TB limit on HDIO_GETGEO ?,
Mark Lord
[PATCH v2 3/5] libata: use scsi_build_sense_buffer,
FUJITA Tomonori
[PATCH 1/5] mpc8xx-ide: use ide_find_port(),
Bartlomiej Zolnierkiewicz
Burning CDs as user produces coasters (Plextor drive),
Gregor Jasny
[PATCH 3/3] ide: remove obsoleted "ide=" kernel parameters,
Bartlomiej Zolnierkiewicz
[PATCH 2/3] ide: add "noacpi" / "acpigtf" / "acpionboot" parameters,
Bartlomiej Zolnierkiewicz
[PATCH 1/3] gayle: add "doubler" parameter,
Bartlomiej Zolnierkiewicz
[PATCH #upstream-fixes] libata: improve HPA error handling,
Tejun Heo
[PATCH #upstream-fixes] libata: assume no device is attached if both IDENTIFYs are aborted,
Tejun Heo
[PATCH 1/8] ide: always auto-tune PIO in legacy VLB host drivers,
Bartlomiej Zolnierkiewicz
[PATCH] ide: add "ignore_cable" parameter (take 2),
Bartlomiej Zolnierkiewicz
[PATCH 3/3] ide: remove obsoleted "idebus=" kernel parameter,
Bartlomiej Zolnierkiewicz
[PATCH 2/3] ide: mark "idebus=" kernel parameter as obsoleted (take 2),
Bartlomiej Zolnierkiewicz
[PATCH 1/3] ide: add "vlb|pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
[PATCH] ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2),
Bartlomiej Zolnierkiewicz
[PATCH] ide: Documentation/ide/ide.txt fixes,
Bartlomiej Zolnierkiewicz
[PATCH 2.6.25-rc6] sata_promise: fix hardreset hotplug quirk,
Mikael Pettersson
Re: 2.6.25-rc6-git6: Reported regressions from 2.6.24,
Jeff Garzik
[Bug 10296] New: System freezes after I/O on pata_jmicron device,
bugme-daemon
Re: 2.6.24.3: regular sata drive resets - worrisome?,
Andrew Morton
Re: Fw: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3,
Tejun Heo
AHCI SATA DVD writing issue,
davor emard
ide_cd modifies hard_* members of request,
Nikanth Karthikesan
[PATCH 0/17] ide-tape: remove pipeline functionality-v3,
Borislav Petkov
- [PATCH 02/17] ide-tape: remove unused parameter from idetape_copy_stage_from_user,
Borislav Petkov
- [PATCH 05/17] ide-tape: remove pipeline-specific code in idetape_space_over_filemarks(),
Borislav Petkov
- [PATCH 01/17] ide-tape: remove unused parameter from idetape_copy_stage_to_user,
Borislav Petkov
- [PATCH 06/17] ide-tape: remove idetape_pipeline_size(),
Borislav Petkov
- [PATCH 09/17] ide-tape: unwrap idetape_queue_pc_tail(),
Borislav Petkov
- [PATCH 03/17] ide-tape: remove idetape_discard_read_pipeline(),
Borislav Petkov
- [PATCH 04/17] ide-tape: remove idetape_empty_write_pipeline(),
Borislav Petkov
- [PATCH 13/17] ide-tape: remove pipelined mode tape control flags,
Borislav Petkov
- [PATCH 08/17] ide-tape: remove pipeline-specific code from idetape_end_request(),
Borislav Petkov
- [PATCH 07/17] ide-tape: remove idetape_remove_stage_head(),
Borislav Petkov
- [PATCH 10/17] ide-tape: remove remaining pipeline functionality,
Borislav Petkov
- [PATCH 11/17] ide-tape: remove pipeline-specific code from idetape_setup,
Borislav Petkov
- [PATCH 14/17] ide-tape: remove pipeline-specific members from struct ide_tape_obj,
Borislav Petkov
- [PATCH 16/17] ide-tape: remove pipelined mode description from Documentation/ide/ide-tape.txt,
Borislav Petkov
- [PATCH 15/17] ide-tape: remove misc references to pipelined operation in the comments,
Borislav Petkov
- [PATCH 17/17] ide-tape: remove comments markup from Documentation/ide/ide-tape.txt,
Borislav Petkov
- [PATCH 12/17] ide-tape: remove pipelined mode parameters,
Borislav Petkov
- Re: [PATCH 0/17] ide-tape: remove pipeline functionality-v3,
Bartlomiej Zolnierkiewicz
[PATCH 1/1] IDE: fix ide.h compiler warning,
Jiri Slaby
[PATCH] ide: remove IDE devices from /proc/ide/ before unregistering them,
Bartlomiej Zolnierkiewicz
[RFC] Read/Write Buffer support,
Matthew Wilcox
Marvell 6141 support,
Andy Sturrock
Re: [PATCH] hid, 2.6.23 - add support for new macbook and apple aluminum keyboard "fn" key,
Tobias Müller
[PATCH 1/12] ali14xx: add "vlb_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 2/12] ht6560b: add "vlb_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 3/12] qd65xx: add "vlb_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 4/12] aec62xx: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 5/12] alim15x3: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 6/12] amd74xx: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 7/12] cmd64x: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 8/12] cy82c693: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 9/12] opti621: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 10/12] via82cxxx: add "pci_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 11/12] cmd640: add "cmd_clock=" parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 12/12] ide: mark "idebus=" kernel parameter as obsoleted,
Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/12] ali14xx: add "vlb_clock=" parameter,
Alan Cox
Re: Useful benchmarking tools for RAID,
Richard Scobie
[Bug 10239] New: PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
- [Bug 10239] PLEXTOR DVDR PX-740A drive not ready for command,
bugme-daemon
[BUG] PLEXTOR DVDR PX-740A drive not ready for command,
Richard Genoud
RE: NCQ change on 2007-12-07,
Lanstein, Alex C
[PATCH libata-dev#upstream-fixes] libata-acpi: improve dock event handling,
Tejun Heo
Re: Remove obsoleted "idex=noprobe" kernel parameter,
Rus V. Brushkoff
[2.6.25] scsi mid layer: add a time threshold to force device to completed command queued for a long time.,
Gwendal Grignou
[PATCH 4/6] ide: use clamp_val macro instead of FIT macro,
Harvey Harrison
[PATCH 3/6] ata: use clamp_val macro instead of FIT macro,
Harvey Harrison
[PATCH 3/3] ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted,
Bartlomiej Zolnierkiewicz
[PATCH 2/3] ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted,
Bartlomiej Zolnierkiewicz
[PATCH 1/3] ide: remove obsoleted "hdx=noautotune" kernel parameter,
Bartlomiej Zolnierkiewicz
[PATCH] ide: remove obsoleted "idex=" kernel parameters,
Bartlomiej Zolnierkiewicz
[PATCH] ide: remove obsoleted "idex=noprobe" kernel parameter (take 2),
Bartlomiej Zolnierkiewicz
[PATCH] ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters (take 2),
Bartlomiej Zolnierkiewicz
[Bug 10225] New: 80-wire cable detection failed for SAMSUNG SP0822N,
bugme-daemon
nVidia MCP55 SATA hotplug support?,
Mourad De Clerck
Marvell 6121 SATA support?,
Mourad De Clerck
[Build Failure] 2.6.25-rc5-mm1 Build fails with allmodconfig probe_4drives undefined,
Kamalesh Babulal
[PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Tejun Heo
- [PATCH 1/9] libata: reorganize ata_port_operations,
Tejun Heo
- [PATCH 2/9] libata: implement and use ata_noop_irq_clear(),
Tejun Heo
- [PATCH 4/9] libata: implement and use SHT initializers,
Tejun Heo
- [PATCH 3/9] libata: normalize port_info, port_operations and sht tables,
Tejun Heo
- [PATCH 8/9] libata: kill port_info->sht and ->irq_handler,
Tejun Heo
- [PATCH 7/9] libata: stop overloading port_info->private_data,
Tejun Heo
- [PATCH 9/9] libata: make reset related methods proper port operations,
Tejun Heo
- [PATCH 6/9] libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht,
Tejun Heo
- [PATCH 5/9] libata: implement and use ops inheritance,
Tejun Heo
- Re: [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Mark Lord
- Re: [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Tejun Heo
- Re: [PATCHSET] libata: clean up scsi_host_templates and ata_port_operations, take #3,
Jeff Garzik
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
