Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo wrote:
> Tvrtko A. Ursulin wrote:
>> On Wednesday 14 May 2008 08:58:56 Erik Inge Bolsø wrote:
>>> The drive does say
>>>
>>>         Enabled Supported:
>>>                 SMART feature set
>>>                 Security Mode feature set
>>>            *    Power Management feature set
>>>            *    Write cache
>>>            *    Look-ahead
>>>
>>> ... so doesn't look like SMART is enabled on the drive.
>>>
>>> Does the problem go away if you do a
>>>
>>> smartctl -s on /dev/sda
>>>
>>> first? :)
>> Indeed it does, shame on me for overseeing that small detail. :) 
>
> Oh... shame on me too.  :-)

Why didn't smartctl notice that?  In my experience it usually does
report when SMART is disabled.  Is the error not being properly
reported back to userspace maybe?  Tvrtko's original problem report
has lots of uninitialized (or leaked?) data, and a lot of it looks
like ASCII (for example his bogus RAW_VALUEs contain pieces of the
model number).

-jim
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux