Greg,
Thanks for responding and excuse me for the delay in reply.
# This is a re-post as I had email server configuration issue.
# Excuse me if you receive similar messages twice.
I was finally able to stop the machine, and took out 1 of 3 drives
in question. I re-tested the drive, and the issue reproduced 100%.
Here's the model/serial code of the drive:
# output from "scsiinfo -a /dev/sda"
Vendor: ATA
Product: Hitachi HDP72505
Revision level: GM4O
Serial Number ' GEB531RE0GEPGB'
From the information I have gathered, this issue seems to be
either environment or usage-dependent. It seems it always reproduces,
or never happens. While I see many reports (and reports of "-1" fix
working) on various blogs/BBSs, I do also see many saying "doesn't
happen with me".
I must admit this weakens my proposal to apply the patch.
However, althrough it may not be 100% reproducible everywhere at
this time, I believe there is at least an ambiguity in the spec ("How
should ATA req on 0xfffffff be handled?") which could cause driver to
fail anytime, and so decided to submit a patch.
The fact *BSDs (and probably Intel) having similar fix also pushed
me to take action, and I'd also like to clarify that I'm not the
only one with this "-1" fix - the exact same stuff has been floating
on the net for months.
Now I have the drive at hand, I re-tested with latest 2.6.25.3
kernel (rebuilt from vanilla source, not some distribution kernel),
and here's the result:
# uname -a
Linux pc 2.6.25.3 #2 Thu May 15 01:05:14 JST 2008 i686 GNU/Linux
# dd if=/dev/sda bs=512 count=1 skip=268435455
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289322 s, 0.0 kB/s
# dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device
error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
...[same messages repeating several times]...
And for block size of 1KB-8KB, I get exactly the same error:
# dd if=/dev/sda bs=1024 count=1 skip=134217727
dd: reading `/dev/sda': Input/output error
# dd if=/dev/sda bs=2048 count=1 skip=67108863
dd: reading `/dev/sda': Input/output error
# dd if=/dev/sda bs=4096 count=1 skip=33554431
dd: reading `/dev/sda': Input/output error
# dd if=/dev/sda bs=8192 count=1 skip=16777215
dd: reading `/dev/sda': Input/output error
# dd if=/dev/sda bs=16384 count=1 skip=8388607
dd: reading `/dev/sda': Input/output error
Now, here's more interesting behavior of the drive.
With enough "backoff" from the border, the drive responds
normally to the request:
# dd if=/dev/sda bs=4096 count=1 skip=33554431
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.288113 s, 0.0 kB/s
# dd if=/dev/sda bs=4096 count=2 skip=33554430
dd: reading `/dev/sda': Input/output error
1+0 records in <----------------------------- PARTIAL READ OK
1+0 records out
4096 bytes (4.1 kB) copied, 0.309428 s, 13.2 kB/s
# dd if=/dev/sda bs=4096 count=3 skip=33554429
3+0 records in <----------------------------- FULL READ OK
3+0 records out
12288 bytes (12 kB) copied, 0.00753634 s, 1.6 MB/s
# dd if=/dev/sda bs=4096 count=100 skip=33554429
100+0 records in
100+0 records out
409600 bytes (410 kB) copied, 0.00551966 s, 74.2 MB/s
And the same test with 512-byte block request:
# dd if=/dev/sda bs=512 count=1 skip=268435455
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289812 s, 0.0 kB/s
# dd if=/dev/sda bs=512 count=2 skip=268435454
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.28924 s, 0.0 kB/s
...
...continue backing off with larger total access size...
...
# dd if=/dev/sda bs=512 count=8 skip=268435448
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.286469 s, 0.0 kB/s
# dd if=/dev/sda bs=512 count=9 skip=268435447
dd: reading `/dev/sda': Input/output error
1+0 records in <----------------------------- PARTIAL READ OK
1+0 records out
512 bytes (512 B) copied, 0.322541 s, 1.6 kB/s
...
...continue backing off with larger total access size...
...
# dd if=/dev/sda bs=512 count=16 skip=268435440
dd: reading `/dev/sda': Input/output error
8+0 records in <----------------------------- MORE PARTIAL READ OK
8+0 records out
4096 bytes (4.1 kB) copied, 0.327491 s, 12.5 kB/s
# dd if=/dev/sda bs=512 count=17 skip=268435439
17+0 records in <----------------------------- FULL READ OK
17+0 records out
8704 bytes (8.7 kB) copied, 0.0119018 s, 731 kB/s
# dd if=/dev/sda bs=512 count=100 skip=268435439
100+0 records in
100+0 records out
51200 bytes (51 kB) copied, 0.00237427 s, 21.6 MB/s
I'm starting to see some pattern here...
So even if request goes over LBA address of 0xfffffff, it seems
it won't break if certain amount of request (8KB>) is sent prior
to accessing the border.
I have attached full log of the test (pctest.sh, pctest.log), so
please check it out if there's anything unclear with above excerpt.
Also, as this could be some hardware and/or software combination issue,
reports generated by lshw(1) and scsiinfo(1) are also attached.
Is there any other tests I can do to track down the issue?
Maybe sending raw LBA28 request directly to the drive may help to
identify the issue?
Best Regards,
--
Taisuke Yamada
>> > I recently bought 3 HGST P7K500-series 500GB SATA drives and
>> > had trouble accessing the block right on the LBA28-LBA48 border.
>> > Here's how it fails (same for all 3 drives):
>> >
>> > # dd if=/dev/sdc bs=512 count=1 skip=268435455 > /dev/null
>> > dd: reading `/dev/sdc': Input/output error
>>
>> I'm surprised to see the above. We do lots of dd to raw SATA drive
>> activity with a large variety of drives. Both reads and writes and
>> we've never noticed this issue.
>>
>> Does it happen if you are using 4k blocks with dd?
>>
>> ie. We typically read / write the entire drive but using 4k blocks.
>>
>> In fact a few months ago we specifically bought about 15 drives of
>> various sizes and manufacturers and verified that we could both read
>> and write all of the sectors of the drives.
>>
> Taisuke,
>
> I'd like to reproduce your results and keep the drive as a test drive
> to ensure our systems work properly across the entire spectrum of
> drives.
>
>>From our earlier tests we had a Hitachi 7K1000 Series Model
> HDS721075KLA330 SATA 750GB drive, but it is not exhibiting the problem
> you describe.
>
> Can you tell me a specific Model number Hitachi drive that the current
> linux kernel is failing with.
<?xml version="1.0" standalone="yes" ?>
<!-- generated by lshw-B.02.12.01 -->
<!-- GCC 4.2.3 20080114 (prerelease) (Debian 4.2.2-7) -->
<!-- Linux 2.6.25.3 #2 Thu May 15 01:05:14 JST 2008 i686 -->
<!-- GNU libc 2 (glibc 2.7) -->
<node id="pc" claimed="true" class="system" handle="DMI:0001">
<description>Desktop Computer</description>
<product>PROD00000000</product>
<vendor>OEM00000</vendor>
<width units="bits">32</width>
<configuration>
<setting id="boot" value="normal" />
<setting id="chassis" value="desktop" />
<setting id="cpus" value="1" />
</configuration>
<capabilities>
<capability id="smbios-2.2" >SMBIOS version 2.2</capability>
<capability id="dmi-2.2" >DMI version 2.2</capability>
<capability id="smp-1.4" >SMP specification v1.4</capability>
<capability id="smp" >Symmetric Multi-Processing</capability>
</capabilities>
<node id="core" claimed="true" class="bus" handle="DMI:0002">
<description>Motherboard</description>
<product>MS-7025</product>
<physid>0</physid>
<node id="firmware" claimed="true" class="memory" handle="">
<description>BIOS</description>
<vendor>Phoenix Technologies, LTD</vendor>
<physid>0</physid>
<version>6.00 PG (12/21/2005)</version>
<size units="bytes">131072</size>
<capacity units="bytes">458752</capacity>
<capabilities>
<capability id="isa" >ISA bus</capability>
<capability id="pci" >PCI bus</capability>
<capability id="pnp" >Plug-and-Play</capability>
<capability id="apm" >Advanced Power Management</capability>
<capability id="upgrade" >BIOS EEPROM can be upgraded</capability>
<capability id="shadowing" >BIOS shadowing</capability>
<capability id="cdboot" >Booting from CD-ROM/DVD</capability>
<capability id="bootselect" >Selectable boot path</capability>
<capability id="socketedrom" >BIOS ROM is socketed</capability>
<capability id="edd" >Enhanced Disk Drive extensions</capability>
<capability id="int13floppy360" >5.25" 360KB floppy</capability>
<capability id="int13floppy1200" >5.25" 1.2MB floppy</capability>
<capability id="int13floppy720" >3.5" 720KB floppy</capability>
<capability id="int13floppy2880" >3.5" 2.88MB floppy</capability>
<capability id="int5printscreen" >Print Screen key</capability>
<capability id="int9keyboard" >i8042 keyboard controller</capability>
<capability id="int14serial" >INT14 serial line control</capability>
<capability id="int17printer" >INT17 printer control</capability>
<capability id="int10video" >INT10 CGA/Mono video</capability>
<capability id="acpi" >ACPI</capability>
<capability id="usb" >USB legacy emulation</capability>
<capability id="agp" >AGP</capability>
<capability id="ls120boot" >Booting from LS-120</capability>
<capability id="zipboot" >Booting from ATAPI ZIP</capability>
</capabilities>
</node>
<node id="cpu:0" claimed="true" class="processor" handle="DMI:0004">
<description>CPU</description>
<product>AMD Athlon(tm) 64 Processor 3200+</product>
<vendor>Advanced Micro Devices [AMD]</vendor>
<physid>4</physid>
<businfo>cpu@0</businfo>
<version>15.15.0</version>
<slot>Socket 939</slot>
<size units="Hz">2010000000</size>
<capacity units="Hz">3000000000</capacity>
<width units="bits">64</width>
<clock units="Hz">200000000</clock>
<capabilities>
<capability id="boot" >boot processor</capability>
<capability id="fpu" >mathematical co-processor</capability>
<capability id="fpu_exception" >FPU exceptions reporting</capability>
<capability id="wp" />
<capability id="vme" >virtual mode extensions</capability>
<capability id="de" >debugging extensions</capability>
<capability id="pse" >page size extensions</capability>
<capability id="tsc" >time stamp counter</capability>
<capability id="msr" >model-specific registers</capability>
<capability id="pae" >4GB+ memory addressing (Physical Address Extension)</capability>
<capability id="mce" >machine check exceptions</capability>
<capability id="cx8" >compare and exchange 8-byte</capability>
<capability id="apic" >on-chip advanced programmable interrupt controller (APIC)</capability>
<capability id="sep" >fast system calls</capability>
<capability id="mtrr" >memory type range registers</capability>
<capability id="pge" >page global enable</capability>
<capability id="mca" >machine check architecture</capability>
<capability id="cmov" >conditional move instruction</capability>
<capability id="pat" >page attribute table</capability>
<capability id="pse36" >36-bit page size extensions</capability>
<capability id="clflush" />
<capability id="mmx" >multimedia extensions (MMX)</capability>
<capability id="fxsr" >fast floating point save/restore</capability>
<capability id="sse" >streaming SIMD extensions (SSE)</capability>
<capability id="sse2" >streaming SIMD extensions (SSE2)</capability>
<capability id="syscall" >fast system calls</capability>
<capability id="nx" >no-execute bit (NX)</capability>
<capability id="mmxext" >multimedia extensions (MMXExt)</capability>
<capability id="fxsr_opt" />
<capability id="x86-64" >64bits extensions (x86-64)</capability>
<capability id="3dnowext" >multimedia extensions (3DNow!Ext)</capability>
<capability id="3dnow" >multimedia extensions (3DNow!)</capability>
<capability id="lahf_lm" />
<capability id="ts" />
<capability id="fid" />
<capability id="vid" />
<capability id="ttp" />
</capabilities>
<node id="cache:0" claimed="true" class="memory" handle="DMI:000B">
<description>L1 cache</description>
<physid>b</physid>
<slot>Internal Cache</slot>
<size units="bytes">131072</size>
<capacity units="bytes">131072</capacity>
<capabilities>
<capability id="synchronous" >Synchronous</capability>
<capability id="internal" >Internal</capability>
<capability id="write-back" >Write-back</capability>
</capabilities>
</node>
<node id="cache:1" claimed="true" class="memory" handle="DMI:000D">
<description>L2 cache</description>
<physid>d</physid>
<slot>External Cache</slot>
<size units="bytes">524288</size>
<capacity units="bytes">524288</capacity>
<capabilities>
<capability id="synchronous" >Synchronous</capability>
<capability id="internal" >Internal</capability>
<capability id="write-back" >Write-back</capability>
</capabilities>
</node>
</node>
<node id="cpu:1" disabled="true" claimed="true" class="processor" handle="DMI:0005">
<description>CPU</description>
<vendor>Unknown</vendor>
<physid>5</physid>
<businfo>cpu@1</businfo>
<version>15.15.0</version>
<slot>Socket 939</slot>
<size units="Hz">2010000000</size>
<capacity units="Hz">3000000000</capacity>
<clock units="Hz">200000000</clock>
<node id="cache:0" claimed="true" class="memory" handle="DMI:000C">
<description>L1 cache</description>
<physid>c</physid>
<slot>Internal Cache</slot>
<size units="bytes">131072</size>
<capacity units="bytes">131072</capacity>
<capabilities>
<capability id="synchronous" >Synchronous</capability>
<capability id="internal" >Internal</capability>
<capability id="write-back" >Write-back</capability>
</capabilities>
</node>
<node id="cache:1" claimed="true" class="memory" handle="DMI:000E">
<description>L2 cache</description>
<physid>e</physid>
<slot>External Cache</slot>
<size units="bytes">524288</size>
<capacity units="bytes">524288</capacity>
<capabilities>
<capability id="synchronous" >Synchronous</capability>
<capability id="internal" >Internal</capability>
<capability id="write-back" >Write-back</capability>
</capabilities>
</node>
</node>
<node id="memory" claimed="true" class="memory" handle="DMI:001F">
<description>System Memory</description>
<physid>1f</physid>
<slot>System board or motherboard</slot>
<size units="bytes">3221225472</size>
<node id="bank:0" claimed="true" class="memory" handle="DMI:0020">
<description>DIMM</description>
<physid>0</physid>
<slot>A0</slot>
<size units="bytes">1073741824</size>
<width units="bits">64</width>
</node>
<node id="bank:1" claimed="true" class="memory" handle="DMI:0021">
<description>DIMM</description>
<physid>1</physid>
<slot>A1</slot>
<size units="bytes">1073741824</size>
<width units="bits">64</width>
</node>
<node id="bank:2" claimed="true" class="memory" handle="DMI:0022">
<description>DIMM</description>
<physid>2</physid>
<slot>A2</slot>
<size units="bytes">536870912</size>
<width units="bits">64</width>
</node>
<node id="bank:3" claimed="true" class="memory" handle="DMI:0023">
<description>DIMM</description>
<physid>3</physid>
<slot>A3</slot>
<size units="bytes">536870912</size>
<width units="bits">64</width>
</node>
</node>
<node id="pci:0" claimed="true" class="bridge" handle="PCIBUS:0000:00">
<description>Host bridge</description>
<product>nForce3 250Gb Host Bridge</product>
<vendor>nVidia Corporation</vendor>
<physid>100</physid>
<businfo>pci@0000:00:00.0</businfo>
<version>a1</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<node id="isa" claimed="true" class="bridge" handle="PCI:0000:00:01.0">
<description>ISA bridge</description>
<product>nForce3 250Gb LPC Bridge</product>
<vendor>nVidia Corporation</vendor>
<physid>1</physid>
<businfo>pci@0000:00:01.0</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="0" />
</configuration>
<capabilities>
<capability id="isa" />
<capability id="bus_master" >bus mastering</capability>
</capabilities>
</node>
<node id="serial" class="bus" handle="PCI:0000:00:01.1">
<description>SMBus</description>
<product>nForce 250Gb PCI System Management</product>
<vendor>nVidia Corporation</vendor>
<physid>1.1</physid>
<businfo>pci@0000:00:01.1</businfo>
<version>a1</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="usb:0" class="bus" handle="PCI:0000:00:02.0">
<description>USB Controller</description>
<product>CK8S USB Controller</product>
<vendor>nVidia Corporation</vendor>
<physid>2</physid>
<businfo>pci@0000:00:02.0</businfo>
<version>a1</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="usb:1" class="bus" handle="PCI:0000:00:02.1">
<description>USB Controller</description>
<product>CK8S USB Controller</product>
<vendor>nVidia Corporation</vendor>
<physid>2.1</physid>
<businfo>pci@0000:00:02.1</businfo>
<version>a1</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="usb:2" class="bus" handle="PCI:0000:00:02.2">
<description>USB Controller</description>
<product>nForce3 EHCI USB 2.0 Controller</product>
<vendor>nVidia Corporation</vendor>
<physid>2.2</physid>
<businfo>pci@0000:00:02.2</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="debug" >Debug port</capability>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="bridge" disabled="true" claimed="true" class="bridge" handle="PCI:0000:00:05.0">
<description>Ethernet interface</description>
<product>CK8S Ethernet Controller</product>
<vendor>nVidia Corporation</vendor>
<physid>5</physid>
<businfo>pci@0000:00:05.0</businfo>
<logicalname>eth0</logicalname>
<version>a2</version>
<serial>00:11:09:d4:92:68</serial>
<capacity>1000000000</capacity>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="autonegotiation" value="on" />
<setting id="broadcast" value="yes" />
<setting id="driver" value="forcedeth" />
<setting id="driverversion" value="0.61" />
<setting id="latency" value="0" />
<setting id="link" value="yes" />
<setting id="maxlatency" value="20" />
<setting id="mingnt" value="1" />
<setting id="multicast" value="yes" />
<setting id="port" value="MII" />
</configuration>
<capabilities>
<capability id="bridge" />
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
<capability id="ethernet" />
<capability id="physical" >Physical interface</capability>
<capability id="mii" >Media Independant Interface</capability>
<capability id="10bt" >10MB/s</capability>
<capability id="10bt-fd" >10MB/s (full duplex)</capability>
<capability id="100bt" >100MB/s</capability>
<capability id="100bt-fd" >100MB/s (full duplex)</capability>
<capability id="1000bt-fd" >1GB/s (full duplex)</capability>
<capability id="autonegotiation" >Auto-negotiation</capability>
</capabilities>
</node>
<node id="multimedia" class="multimedia" handle="PCI:0000:00:06.0">
<description>Multimedia audio controller</description>
<product>nForce3 250Gb AC'97 Audio Controller</product>
<vendor>nVidia Corporation</vendor>
<physid>6</physid>
<businfo>pci@0000:00:06.0</businfo>
<version>a1</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="0" />
<setting id="maxlatency" value="5" />
<setting id="mingnt" value="2" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="ide:0" claimed="true" class="storage" handle="PCI:0000:00:08.0">
<description>IDE interface</description>
<product>CK8S Parallel ATA Controller (v2.5)</product>
<vendor>nVidia Corporation</vendor>
<physid>8</physid>
<businfo>pci@0000:00:08.0</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="driver" value="AMD_IDE" />
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="ide" />
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
<node id="ide:0" claimed="true" class="bus" handle="IDE:ide0">
<description>IDE Channel 0</description>
<physid>0</physid>
<businfo>ide@0</businfo>
<logicalname>ide0</logicalname>
<clock units="Hz">66000000</clock>
<node id="disk" claimed="true" class="disk" handle="IDE:ide0:hda">
<description>ATA Disk</description>
<product>HDS722516VLAT20</product>
<physid>0</physid>
<businfo>ide@xxx</businfo>
<logicalname>/dev/hda</logicalname>
<dev>3d:0d</dev>
<version>V34OA60A</version>
<serial>VNR4GMC4GBKKZM</serial>
<size units="bytes">164696555520</size>
<configuration>
<setting id="apm" value="off" />
<setting id="mode" value="udma2" />
<setting id="signature" value="000d9b70" />
<setting id="smart" value="on" />
</configuration>
<capabilities>
<capability id="ata" >ATA</capability>
<capability id="dma" >Direct Memory Access</capability>
<capability id="lba" >Large Block Addressing</capability>
<capability id="iordy" >I/O ready reporting</capability>
<capability id="smart" >S.M.A.R.T. (Self-Monitoring And Reporting Technology)</capability>
<capability id="security" >ATA security extensions</capability>
<capability id="pm" >Power Management</capability>
<capability id="apm" >Advanced Power Management</capability>
<capability id="partitioned" >Partitioned disk</capability>
<capability id="partitioned:dos" >MS-DOS partition table</capability>
</capabilities>
<node id="volume:0" claimed="true" class="volume" handle="">
<description>Windows FAT volume</description>
<vendor>mkdosfs</vendor>
<physid>1</physid>
<businfo>ide@xxx,1</businfo>
<logicalname>/dev/hda1</logicalname>
<dev>3d:1d</dev>
<version>FAT16</version>
<serial>482a-42ca</serial>
<size>254950912</size>
<capacity>254951424</capacity>
<configuration>
<setting id="FATs" value="2" />
<setting id="filesystem" value="fat" />
</configuration>
<capabilities>
<capability id="primary" >Primary partition</capability>
<capability id="fat" >Windows FAT</capability>
<capability id="initialized" >initialized volume</capability>
</capabilities>
</node>
<node id="volume:1" claimed="true" class="volume" handle="">
<description>Windows NTFS volume</description>
<physid>2</physid>
<businfo>ide@xxx,2</businfo>
<logicalname>/dev/hda2</logicalname>
<dev>3d:2d</dev>
<version>3.1</version>
<serial>6a2599db-5b72-4149-9d2a-3994cc7da3e3</serial>
<size>31976236032</size>
<capacity>31996339200</capacity>
<configuration>
<setting id="clustersize" value="4096" />
<setting id="created" value="2008-05-14 09:33:24" />
<setting id="filesystem" value="ntfs" />
<setting id="state" value="clean" />
</configuration>
<capabilities>
<capability id="primary" >Primary partition</capability>
<capability id="bootable" >Bootable partition (active)</capability>
<capability id="ntfs" >Windows NTFS</capability>
<capability id="initialized" >initialized volume</capability>
</capabilities>
</node>
<node id="volume:2" claimed="true" class="volume" handle="">
<description>EXT3 volume</description>
<vendor>Linux</vendor>
<physid>3</physid>
<businfo>ide@xxx,3</businfo>
<logicalname>/dev/hda3</logicalname>
<dev>3d:3d</dev>
<version>1.0</version>
<serial>9ebcc955-b2bb-4cce-a2b6-7bca665a9779</serial>
<size>31996338176</size>
<capacity>31996339200</capacity>
<configuration>
<setting id="created" value="2008-05-14 07:53:24" />
<setting id="filesystem" value="ext3" />
<setting id="modified" value="2008-05-14 10:51:41" />
<setting id="mounted" value="2008-05-14 10:46:10" />
<setting id="state" value="clean" />
</configuration>
<capabilities>
<capability id="primary" >Primary partition</capability>
<capability id="journaled" />
<capability id="extended_attributes" >Extended Attributes</capability>
<capability id="large_files" >4GB+ files</capability>
<capability id="huge_files" >16TB+ files</capability>
<capability id="recover" >needs recovery</capability>
<capability id="ext3" />
<capability id="ext2" >EXT2/EXT3</capability>
<capability id="initialized" >initialized volume</capability>
</capabilities>
</node>
<node id="volume:3" claimed="true" class="volume" handle="">
<description>Extended partition</description>
<physid>4</physid>
<businfo>ide@xxx,4</businfo>
<logicalname>/dev/hda4</logicalname>
<dev>3d:4d</dev>
<size>8011422720</size>
<capacity>8011422720</capacity>
<capabilities>
<capability id="primary" >Primary partition</capability>
<capability id="extended" >Extended partition</capability>
<capability id="partitioned" >Partitioned disk</capability>
<capability id="partitioned:extended" >Extended partition</capability>
</capabilities>
<node id="logicalvolume:0" claimed="true" class="volume" handle="">
<description>Linux swap / Solaris partition</description>
<physid>5</physid>
<logicalname>/dev/hda5</logicalname>
<dev>3d:5d</dev>
<capacity>3997486080</capacity>
<capabilities>
<capability id="nofs" >No filesystem</capability>
</capabilities>
</node>
<node id="logicalvolume:1" claimed="true" class="volume" handle="">
<description>Linux filesystem partition</description>
<physid>6</physid>
<logicalname>/dev/hda6</logicalname>
<dev>3d:6d</dev>
<capacity>3997453824</capacity>
</node>
</node>
</node>
</node>
<node id="ide:1" claimed="true" class="bus" handle="IDE:ide1">
<description>IDE Channel 1</description>
<physid>1</physid>
<businfo>ide@1</businfo>
<logicalname>ide1</logicalname>
<clock units="Hz">66000000</clock>
<node id="cdrom" claimed="true" class="disk" handle="IDE:ide1:hdc">
<description>CD-R/CD-RW writer</description>
<product>SONY CD-RW CRX175E</product>
<physid>0</physid>
<businfo>ide@xxx</businfo>
<logicalname>/dev/hdc</logicalname>
<dev>22d:0d</dev>
<version>1.0g</version>
<configuration>
<setting id="status" value="nodisc" />
</configuration>
<capabilities>
<capability id="packet" >ATAPI packet device</capability>
<capability id="atapi" >ATAPI</capability>
<capability id="cdrom" >can read CD-ROMs</capability>
<capability id="removable" >support is removable</capability>
<capability id="nonmagnetic" >support is non-magnetic (optical)</capability>
<capability id="dma" >Direct Memory Access</capability>
<capability id="lba" >Large Block Addressing</capability>
<capability id="iordy" >I/O ready reporting</capability>
<capability id="audio" >Audio CD playback</capability>
<capability id="cd-r" >CD-R burning</capability>
<capability id="cd-rw" >CD-RW burning</capability>
</capabilities>
</node>
</node>
</node>
<node id="ide:1" claimed="true" class="storage" handle="PCI:0000:00:09.0">
<description>IDE interface</description>
<product>CK8S Serial ATA Controller (v2.5)</product>
<vendor>nVidia Corporation</vendor>
<physid>9</physid>
<businfo>pci@0000:00:09.0</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="driver" value="sata_nv" />
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="ide" />
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="ide:2" claimed="true" class="storage" handle="PCI:0000:00:0a.0">
<description>IDE interface</description>
<product>CK8S Serial ATA Controller (v2.5)</product>
<vendor>nVidia Corporation</vendor>
<physid>a</physid>
<businfo>pci@0000:00:0a.0</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="driver" value="sata_nv" />
<setting id="latency" value="0" />
<setting id="maxlatency" value="1" />
<setting id="mingnt" value="3" />
</configuration>
<capabilities>
<capability id="ide" />
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="pci:0" claimed="true" class="bridge" handle="PCIBUS:0000:01">
<description>PCI bridge</description>
<product>nForce3 250Gb AGP Host to PCI Bridge</product>
<vendor>nVidia Corporation</vendor>
<physid>b</physid>
<businfo>pci@0000:00:0b.0</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<capabilities>
<capability id="pci" />
<capability id="bus_master" >bus mastering</capability>
</capabilities>
<node id="display:0" class="display" handle="PCI:0000:01:00.0">
<description>VGA compatible controller</description>
<product>Radeon RV250 If [Radeon 9000]</product>
<vendor>ATI Technologies Inc</vendor>
<physid>0</physid>
<businfo>pci@0000:01:00.0</businfo>
<version>01</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="32" />
<setting id="mingnt" value="8" />
</configuration>
<capabilities>
<capability id="agp" >AGP</capability>
<capability id="agp-2.0" >AGP 2.0</capability>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="display:1" class="display" handle="PCI:0000:01:00.1">
<description>Display controller</description>
<product>Radeon RV250 [Radeon 9000] (Secondary)</product>
<vendor>ATI Technologies Inc</vendor>
<physid>0.1</physid>
<businfo>pci@0000:01:00.1</businfo>
<version>01</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="latency" value="32" />
<setting id="mingnt" value="8" />
</configuration>
<capabilities>
<capability id="agp" >AGP</capability>
<capability id="agp-2.0" >AGP 2.0</capability>
<capability id="pm" >Power Management</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
</node>
<node id="pci:1" claimed="true" class="bridge" handle="PCIBUS:0000:02">
<description>PCI bridge</description>
<product>nForce3 250Gb PCI-to-PCI Bridge</product>
<vendor>nVidia Corporation</vendor>
<physid>e</physid>
<businfo>pci@0000:00:0e.0</businfo>
<version>a2</version>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<capabilities>
<capability id="pci" />
<capability id="bus_master" >bus mastering</capability>
</capabilities>
<node id="display" class="display" handle="PCI:0000:02:08.0">
<description>VGA compatible controller</description>
<product>86c325 [ViRGE]</product>
<vendor>S3 Inc.</vendor>
<physid>8</physid>
<businfo>pci@0000:02:08.0</businfo>
<version>06</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
<configuration>
<setting id="latency" value="32" />
<setting id="maxlatency" value="255" />
<setting id="mingnt" value="4" />
</configuration>
</node>
<node id="generic" class="generic" handle="PCI:0000:02:09.0">
<product>Omron Corporation</product>
<vendor>Omron Corporation</vendor>
<physid>9</physid>
<businfo>pci@0000:02:09.0</businfo>
<version>00</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
<configuration>
<setting id="latency" value="0" />
</configuration>
</node>
<node id="usb:0" class="bus" handle="PCI:0000:02:0a.0">
<description>USB Controller</description>
<product>USB</product>
<vendor>NEC Corporation</vendor>
<physid>a</physid>
<businfo>pci@0000:02:0a.0</businfo>
<version>43</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
<configuration>
<setting id="latency" value="32" />
<setting id="maxlatency" value="42" />
<setting id="mingnt" value="1" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="usb:1" class="bus" handle="PCI:0000:02:0a.1">
<description>USB Controller</description>
<product>USB</product>
<vendor>NEC Corporation</vendor>
<physid>a.1</physid>
<businfo>pci@0000:02:0a.1</businfo>
<version>43</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
<configuration>
<setting id="latency" value="32" />
<setting id="maxlatency" value="42" />
<setting id="mingnt" value="1" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="usb:2" class="bus" handle="PCI:0000:02:0a.2">
<description>USB Controller</description>
<product>USB 2.0</product>
<vendor>NEC Corporation</vendor>
<physid>a.2</physid>
<businfo>pci@0000:02:0a.2</businfo>
<version>04</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
<configuration>
<setting id="latency" value="32" />
<setting id="maxlatency" value="34" />
<setting id="mingnt" value="16" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="firewire" class="bus" handle="PCI:0000:02:0c.0">
<description>FireWire (IEEE 1394)</description>
<product>IEEE 1394 Host Controller</product>
<vendor>VIA Technologies, Inc.</vendor>
<physid>c</physid>
<businfo>pci@0000:02:0c.0</businfo>
<version>46</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
<configuration>
<setting id="latency" value="32" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
</capabilities>
</node>
<node id="network" claimed="true" class="network" handle="PCI:0000:02:0d.0">
<description>Ethernet interface</description>
<product>RTL-8169 Gigabit Ethernet</product>
<vendor>Realtek Semiconductor Co., Ltd.</vendor>
<physid>d</physid>
<businfo>pci@0000:02:0d.0</businfo>
<logicalname>eth1</logicalname>
<version>10</version>
<serial>00:11:09:d4:92:67</serial>
<size>1000000000</size>
<capacity>1000000000</capacity>
<width units="bits">32</width>
<clock units="Hz">66000000</clock>
<configuration>
<setting id="autonegotiation" value="on" />
<setting id="broadcast" value="yes" />
<setting id="driver" value="r8169" />
<setting id="driverversion" value="2.2LK" />
<setting id="duplex" value="full" />
<setting id="ip" value="192.168.1.21" />
<setting id="latency" value="64" />
<setting id="link" value="yes" />
<setting id="maxlatency" value="64" />
<setting id="mingnt" value="32" />
<setting id="multicast" value="yes" />
<setting id="port" value="twisted pair" />
<setting id="speed" value="1GB/s" />
</configuration>
<capabilities>
<capability id="pm" >Power Management</capability>
<capability id="bus_master" >bus mastering</capability>
<capability id="cap_list" >PCI capabilities listing</capability>
<capability id="ethernet" />
<capability id="physical" >Physical interface</capability>
<capability id="tp" >twisted pair</capability>
<capability id="10bt" >10MB/s</capability>
<capability id="10bt-fd" >10MB/s (full duplex)</capability>
<capability id="100bt" >100MB/s</capability>
<capability id="100bt-fd" >100MB/s (full duplex)</capability>
<capability id="1000bt-fd" >1GB/s (full duplex)</capability>
<capability id="autonegotiation" >Auto-negotiation</capability>
</capabilities>
</node>
</node>
</node>
<node id="pci:1" claimed="true" class="bridge" handle="PCIBUS:0000:00">
<description>Host bridge</description>
<product>K8 [Athlon64/Opteron] HyperTransport Technology Configuration</product>
<vendor>Advanced Micro Devices [AMD]</vendor>
<physid>101</physid>
<businfo>pci@0000:00:18.0</businfo>
<version>00</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
</node>
<node id="pci:2" claimed="true" class="bridge" handle="PCIBUS:0000:00">
<description>Host bridge</description>
<product>K8 [Athlon64/Opteron] Address Map</product>
<vendor>Advanced Micro Devices [AMD]</vendor>
<physid>102</physid>
<businfo>pci@0000:00:18.1</businfo>
<version>00</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
</node>
<node id="pci:3" claimed="true" class="bridge" handle="PCIBUS:0000:00">
<description>Host bridge</description>
<product>K8 [Athlon64/Opteron] DRAM Controller</product>
<vendor>Advanced Micro Devices [AMD]</vendor>
<physid>103</physid>
<businfo>pci@0000:00:18.2</businfo>
<version>00</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
</node>
<node id="pci:4" claimed="true" class="bridge" handle="PCIBUS:0000:00">
<description>Host bridge</description>
<product>K8 [Athlon64/Opteron] Miscellaneous Control</product>
<vendor>Advanced Micro Devices [AMD]</vendor>
<physid>104</physid>
<businfo>pci@0000:00:18.3</businfo>
<version>00</version>
<width units="bits">32</width>
<clock units="Hz">33000000</clock>
</node>
</node>
</node>
Inquiry command
---------------
Relative Address 0
Wide bus 32 0
Wide bus 16 0
Synchronous neg. 0
Linked Commands 0
Command Queueing 0
SftRe 0
Device Type 0
Peripheral Qualifier 0
Removable? 0
Device Type Modifier 0
ISO Version 0
ECMA Version 0
ANSI Version 5
AENC 0
TrmIOP 0
Response Data Format 2
Vendor: ATA
Product: Hitachi HDP72505
Revision level: GM4O
Serial Number ' GEB531RE0GEPGB'
Data from Caching Page
----------------------
Write Cache 1
Read Cache 1
Prefetch units 0
Demand Read Retention Priority 0
Demand Write Retention Priority 0
Disable Pre-fetch Transfer Length 0
Minimum Pre-fetch 0
Maximum Pre-fetch 0
Maximum Pre-fetch Ceiling 0
Data from Error Recovery Page
-----------------------------
AWRE 1
ARRE 0
TB 0
RC 0
EER 0
PER 0
DTE 0
DCR 0
Read Retry Count 0
Correction Span 0
Head Offset Count 0
Data Strobe Offset Count 0
Write Retry Count 0
Recovery Time Limit 0
Data from Control Page
----------------------
RLEC 0
QErr 0
DQue 0
EECA 0
RAENP 0
UUAENP 0
EAENP 0
Queue Algorithm Modifier 0
Ready AEN Holdoff Period 0
Data from Defect Lists
----------------------
#!/bin/sh -x
dmesg -c
uname -a
dd if=/dev/sda bs=512 count=1 skip=268435455 > /dev/null
dmesg -c
dd if=/dev/sda bs=1024 count=1 skip=134217727 > /dev/null
dmesg -c
dd if=/dev/sda bs=2048 count=1 skip=67108863 > /dev/null
dmesg -c
dd if=/dev/sda bs=4096 count=1 skip=33554431 > /dev/null
dmesg -c
dd if=/dev/sda bs=8192 count=1 skip=16777215 > /dev/null
dmesg -c
dd if=/dev/sda bs=16384 count=1 skip=8388607 > /dev/null
dmesg -c
seq 1 1 3 | while read i
do
dd if=/dev/sda bs=4096 count=$i skip=`expr 33554432 - $i` > /dev/null
done
dd if=/dev/sda bs=4096 count=100 skip=`expr 33554432 - 3` > /dev/null
seq 1 1 17 | while read i
do
dd if=/dev/sda bs=512 count=$i skip=`expr 268435456 - $i` > /dev/null
done
dd if=/dev/sda bs=512 count=100 skip=`expr 268435456 - 17` > /dev/null
Script started on Thu 15 May 2008 03:48:24 AM JST
pc:~# dmesg -c
pc:~# cat pctest.sh
#!/bin/sh -x
dmesg -c
uname -a
dd if=/dev/sda bs=512 count=1 skip=268435455 > /dev/null
dmesg -c
dd if=/dev/sda bs=1024 count=1 skip=134217727 > /dev/null
dmesg -c
dd if=/dev/sda bs=2048 count=1 skip=67108863 > /dev/null
dmesg -c
dd if=/dev/sda bs=4096 count=1 skip=33554431 > /dev/null
dmesg -c
dd if=/dev/sda bs=8192 count=1 skip=16777215 > /dev/null
dmesg -c
dd if=/dev/sda bs=16384 count=1 skip=8388607 > /dev/null
dmesg -c
seq 1 1 3 | while read i
do
dd if=/dev/sda bs=4096 count=$i skip=`expr 33554432 - $i` > /dev/null
done
dd if=/dev/sda bs=4096 count=100 skip=`expr 33554432 - 3` > /dev/null
seq 1 1 17 | while read i
do
dd if=/dev/sda bs=512 count=$i skip=`expr 268435456 - $i` > /dev/null
done
dd if=/dev/sda bs=512 count=100 skip=`expr 268435456 - 17` > /dev/null
pc:~# ./pctest.sh
+ dmesg -c
+ uname -a
Linux pc 2.6.25.3 #2 Thu May 15 01:05:14 JST 2008 i686 GNU/Linux
+ dd if=/dev/sda bs=512 count=1 skip=268435455
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.288352 s, 0.0 kB/s
+ dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
printk: 11 messages suppressed.
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ dd if=/dev/sda bs=1024 count=1 skip=134217727
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289611 s, 0.0 kB/s
+ dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ dd if=/dev/sda bs=2048 count=1 skip=67108863
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289707 s, 0.0 kB/s
+ dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ dd if=/dev/sda bs=4096 count=1 skip=33554431
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289675 s, 0.0 kB/s
+ dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f8
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435448
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ dd if=/dev/sda bs=8192 count=1 skip=16777215
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.154464 s, 0.0 kB/s
+ dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:10:f0:ff:ff/00:00:00:00:00/ef tag 0 dma 8192 in
res 51/04:10:f0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:10:f0:ff:ff/00:00:00:00:00/ef tag 0 dma 8192 in
res 51/04:10:f0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:10:f0:ff:ff/00:00:00:00:00/ef tag 0 dma 8192 in
res 51/04:10:f0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:10:f0:ff:ff/00:00:00:00:00/ef tag 0 dma 8192 in
res 51/04:10:f0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:10:f0:ff:ff/00:00:00:00:00/ef tag 0 dma 8192 in
res 51/04:10:f0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:10:f0:ff:ff/00:00:00:00:00/ef tag 0 dma 8192 in
res 51/04:10:f0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff f0
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435440
Buffer I/O error on device sda, logical block 33554430
Buffer I/O error on device sda, logical block 33554431
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ dd if=/dev/sda bs=16384 count=1 skip=8388607
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.153976 s, 0.0 kB/s
+ dmesg -c
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:20:e0:ff:ff/00:00:00:00:00/ef tag 0 dma 16384 in
res 51/04:20:e0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:20:e0:ff:ff/00:00:00:00:00/ef tag 0 dma 16384 in
res 51/04:20:e0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:20:e0:ff:ff/00:00:00:00:00/ef tag 0 dma 16384 in
res 51/04:20:e0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:20:e0:ff:ff/00:00:00:00:00/ef tag 0 dma 16384 in
res 51/04:20:e0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:20:e0:ff:ff/00:00:00:00:00/ef tag 0 dma 16384 in
res 51/04:20:e0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:20:e0:ff:ff/00:00:00:00:00/ef tag 0 dma 16384 in
res 51/04:20:e0:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: configured for UDMA/33
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0f ff ff e0
sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 268435424
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ seq 1 1 3
+ read i
++ expr 33554432 - 1
+ dd if=/dev/sda bs=4096 count=1 skip=33554431
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.286723 s, 0.0 kB/s
+ read i
++ expr 33554432 - 2
+ dd if=/dev/sda bs=4096 count=2 skip=33554430
dd: reading `/dev/sda': Input/output error
1+0 records in
1+0 records out
4096 bytes (4.1 kB) copied, 0.304475 s, 13.5 kB/s
+ read i
++ expr 33554432 - 3
+ dd if=/dev/sda bs=4096 count=3 skip=33554429
3+0 records in
3+0 records out
12288 bytes (12 kB) copied, 0.00529322 s, 2.3 MB/s
+ read i
++ expr 33554432 - 3
+ dd if=/dev/sda bs=4096 count=100 skip=33554429
100+0 records in
100+0 records out
409600 bytes (410 kB) copied, 0.00551966 s, 74.2 MB/s
+ seq 1 1 17
+ read i
++ expr 268435456 - 1
+ dd if=/dev/sda bs=512 count=1 skip=268435455
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.2878 s, 0.0 kB/s
+ read i
++ expr 268435456 - 2
+ dd if=/dev/sda bs=512 count=2 skip=268435454
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.290321 s, 0.0 kB/s
+ read i
++ expr 268435456 - 3
+ dd if=/dev/sda bs=512 count=3 skip=268435453
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.288523 s, 0.0 kB/s
+ read i
++ expr 268435456 - 4
+ dd if=/dev/sda bs=512 count=4 skip=268435452
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289456 s, 0.0 kB/s
+ read i
++ expr 268435456 - 5
+ dd if=/dev/sda bs=512 count=5 skip=268435451
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289504 s, 0.0 kB/s
+ read i
++ expr 268435456 - 6
+ dd if=/dev/sda bs=512 count=6 skip=268435450
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289417 s, 0.0 kB/s
+ read i
++ expr 268435456 - 7
+ dd if=/dev/sda bs=512 count=7 skip=268435449
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289421 s, 0.0 kB/s
+ read i
++ expr 268435456 - 8
+ dd if=/dev/sda bs=512 count=8 skip=268435448
dd: reading `/dev/sda': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.289482 s, 0.0 kB/s
+ read i
++ expr 268435456 - 9
+ dd if=/dev/sda bs=512 count=9 skip=268435447
dd: reading `/dev/sda': Input/output error
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.309444 s, 1.7 kB/s
+ read i
++ expr 268435456 - 10
+ dd if=/dev/sda bs=512 count=10 skip=268435446
dd: reading `/dev/sda': Input/output error
2+0 records in
2+0 records out
1024 bytes (1.0 kB) copied, 0.317426 s, 3.2 kB/s
+ read i
++ expr 268435456 - 11
+ dd if=/dev/sda bs=512 count=11 skip=268435445
dd: reading `/dev/sda': Input/output error
3+0 records in
3+0 records out
1536 bytes (1.5 kB) copied, 0.305475 s, 5.0 kB/s
+ read i
++ expr 268435456 - 12
+ dd if=/dev/sda bs=512 count=12 skip=268435444
dd: reading `/dev/sda': Input/output error
4+0 records in
4+0 records out
2048 bytes (2.0 kB) copied, 0.305542 s, 6.7 kB/s
+ read i
++ expr 268435456 - 13
+ dd if=/dev/sda bs=512 count=13 skip=268435443
dd: reading `/dev/sda': Input/output error
5+0 records in
5+0 records out
2560 bytes (2.6 kB) copied, 0.305438 s, 8.4 kB/s
+ read i
++ expr 268435456 - 14
+ dd if=/dev/sda bs=512 count=14 skip=268435442
dd: reading `/dev/sda': Input/output error
6+0 records in
6+0 records out
3072 bytes (3.1 kB) copied, 0.305476 s, 10.1 kB/s
+ read i
++ expr 268435456 - 15
+ dd if=/dev/sda bs=512 count=15 skip=268435441
dd: reading `/dev/sda': Input/output error
7+0 records in
7+0 records out
3584 bytes (3.6 kB) copied, 0.305479 s, 11.7 kB/s
+ read i
++ expr 268435456 - 16
+ dd if=/dev/sda bs=512 count=16 skip=268435440
dd: reading `/dev/sda': Input/output error
8+0 records in
8+0 records out
4096 bytes (4.1 kB) copied, 0.305498 s, 13.4 kB/s
+ read i
++ expr 268435456 - 17
+ dd if=/dev/sda bs=512 count=17 skip=268435439
17+0 records in
17+0 records out
8704 bytes (8.7 kB) copied, 0.00587 s, 1.5 MB/s
+ read i
++ expr 268435456 - 17
+ dd if=/dev/sda bs=512 count=100 skip=268435439
100+0 records in
100+0 records out
51200 bytes (51 kB) copied, 0.00237427 s, 21.6 MB/s
pc:~# exit
exit
Script done on Thu 15 May 2008 03:48:42 AM JST