Bartlomiej Zolnierkiewicz wrote:
Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to
merge code accessing configuration registers through PCI and MMIO together.
Sigh, my coding style cleanup patch heavily clashed with this one, so I had
to recast it...
[ because of this SATA initialization bits from setup_mmio_siimage() are
moved to init_chipset_siimage() ]
This also cuts code size a bit:
text data bss dec hex filename
4437 164 0 4601 11f9 drivers/ide/pci/siimage.o.before
3979 164 0 4143 102f drivers/ide/pci/siimage.o.after
Good work. :-)
While at it:
* Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}.
* Fixup CodingStyle in setup_mmio_siimage().
* Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Acked-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -2,7 +2,7 @@
* Copyright (C) 2001-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
* Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
* Copyright (C) 2007 MontaVista Software, Inc.
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
@@ -124,6 +124,54 @@ static inline unsigned long siimage_seld
return base;
}
+static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
+{
+ u8 tmp = 0;
+
+ if (pci_get_drvdata(dev))
+ tmp = readb((void __iomem *)addr);
+ else
+ pci_read_config_byte(dev, addr, &tmp);
+
+ return tmp;
+}
+
+static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
+{
+ u16 tmp = 0;
+
+ if (pci_get_drvdata(dev))
+ tmp = readw((void __iomem *)addr);
+ else
+ pci_read_config_word(dev, addr, &tmp);
+
+ return tmp;
+}
+
+static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
+{
+ if (pci_get_drvdata(dev))
+ writeb(val, (void __iomem *)addr);
+ else
+ pci_write_config_byte(dev, addr, val);
+}
+
+static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
+{
+ if (pci_get_drvdata(dev))
+ writew(val, (void __iomem *)addr);
+ else
+ pci_write_config_word(dev, addr, val);
+}
+
+static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
+{
+ if (pci_get_drvdata(dev))
+ writel(val, (void __iomem *)addr);
+ else
+ pci_write_config_dword(dev, addr, val);
+}
+
I think this could be further imporoved -- since we have to call
pci_get_drvdata() in the accessors anyway, we could have used it to get the
MMIO base right there, and thus be freed from the necessity to add it to the
MMIO offset in the callers and also most probably from having it copied to
hwif->hwif_data.
@@ -203,36 +249,20 @@ static void sil_set_pio_mode(ide_drive_t
[...]
+ mode |= (unit ? 0x10 : 0x01);
Useless parens -- I'm getting rid of them in my patch anyway...
@@ -557,50 +513,80 @@ static unsigned int setup_mmio_siimage (
[...]
+ sil_iowrite8(dev, 0x72, base + 0xA1);
+ sil_iowrite16(dev, 0x328A, base + 0xA2);
+ sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
+ sil_iowrite32(dev, 0x43924392, base + 0xA8);
+ sil_iowrite32(dev, 0x40094009, base + 0xAC);
+ sil_iowrite8(dev, 0x72, base ? (base + 0xE1) : 0xB1);
+ sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
+ sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
+ sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
+ sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
+
Sigh, I was going to send a patch getting rid of these writes altogether
last year -- there should be no point in setting PIO/DMA/UDMA timings here.
Maybe I'll submit it...
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
