On Tuesday 15 April 2008 04:10:57 Tejun Heo wrote: > Tvrtko A. Ursulin wrote: > > On Sunday 13 April 2008 04:11:15 Tejun Heo wrote: > >> Is auto spindown configured for the drive? > > > > I don't think so - it's a 3.5" drive with no special PM features - but > > how to tell? > > Hmm... Can you please post the result of "smartctl --version" and > "smartctl -a > out 2>&1" and dmesg after the smartctl command? Yep, pasted and attached below. dmesg is 67k, hope list is happy with that. Tvrtko root@sol:~# smartctl --version smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ smartctl comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under the terms of the GNU General Public License Version 2. See http://www.gnu.org for further details. CVS version IDs of files used to build this code are: Module: atacmdnames.cpp revision: 1.15 date: 2006/10/22 uses: atacmdnames.h revision: 1.5 date: 2006/04/12 Module: atacmds.cpp revision: 1.177 date: 2006/10/27 uses: atacmds.h revision: 1.83 date: 2006/08/25 uses: configure.in revision: 1.122 date: 2006/12/20 uses: extern.h revision: 1.47 date: 2006/09/15 uses: int64.h revision: 1.16 date: 2006/10/29 uses: scsiata.h revision: 1.2 date: 2006/07/01 uses: utility.h revision: 1.47 date: 2006/10/09 Module: ataprint.cpp revision: 1.171 date: 2006/10/28 uses: atacmdnames.h revision: 1.5 date: 2006/04/12 uses: atacmds.h revision: 1.83 date: 2006/08/25 uses: ataprint.h revision: 1.29 date: 2006/09/17 uses: configure.in revision: 1.122 date: 2006/12/20 uses: extern.h revision: 1.47 date: 2006/09/15 uses: int64.h revision: 1.16 date: 2006/10/29 uses: knowndrives.h revision: 1.17 date: 2006/08/09 uses: smartctl.h revision: 1.24 date: 2006/07/20 uses: utility.h revision: 1.47 date: 2006/10/09 Module: knowndrives.cpp revision: 1.156 date: 2006/10/30 uses: atacmds.h revision: 1.83 date: 2006/08/25 uses: ataprint.h revision: 1.29 date: 2006/09/17 uses: configure.in revision: 1.122 date: 2006/12/20 uses: extern.h revision: 1.47 date: 2006/09/15 uses: int64.h revision: 1.16 date: 2006/10/29 uses: knowndrives.h revision: 1.17 date: 2006/08/09 uses: utility.h revision: 1.47 date: 2006/10/09 Module: os_linux.cpp revision: 1.88 date: 2006/10/25 uses: atacmds.h revision: 1.83 date: 2006/08/25 uses: configure.in revision: 1.122 date: 2006/12/20 uses: int64.h revision: 1.16 date: 2006/10/29 uses: os_linux.h revision: 1.25 date: 2006/08/25 uses: scsicmds.h revision: 1.63 date: 2006/11/12 uses: utility.h revision: 1.47 date: 2006/10/09 Module: scsicmds.cpp revision: 1.92 date: 2006/11/12 uses: configure.in revision: 1.122 date: 2006/12/20 uses: extern.h revision: 1.47 date: 2006/09/15 uses: int64.h revision: 1.16 date: 2006/10/29 uses: scsicmds.h revision: 1.63 date: 2006/11/12 uses: utility.h revision: 1.47 date: 2006/10/09 Module: scsiprint.cpp revision: 1.119 date: 2006/11/12 uses: configure.in revision: 1.122 date: 2006/12/20 uses: extern.h revision: 1.47 date: 2006/09/15 uses: int64.h revision: 1.16 date: 2006/10/29 uses: scsicmds.h revision: 1.63 date: 2006/11/12 uses: scsiprint.h revision: 1.20 date: 2006/04/12 uses: smartctl.h revision: 1.24 date: 2006/07/20 uses: utility.h revision: 1.47 date: 2006/10/09 Module: smartctl.cpp revision: 1.156 date: 2006/10/09 uses: atacmds.h revision: 1.83 date: 2006/08/25 uses: ataprint.h revision: 1.29 date: 2006/09/17 uses: configure.in revision: 1.122 date: 2006/12/20 uses: extern.h revision: 1.47 date: 2006/09/15 uses: int64.h revision: 1.16 date: 2006/10/29 uses: knowndrives.h revision: 1.17 date: 2006/08/09 uses: scsicmds.h revision: 1.63 date: 2006/11/12 uses: scsiprint.h revision: 1.20 date: 2006/04/12 uses: smartctl.h revision: 1.24 date: 2006/07/20 uses: utility.h revision: 1.47 date: 2006/10/09 Module: utility.cpp revision: 1.62 date: 2006/08/09 uses: configure.in revision: 1.122 date: 2006/12/20 uses: int64.h revision: 1.16 date: 2006/10/29 uses: utility.h revision: 1.47 date: 2006/10/09 smartmontools release 5.37 dated 2006/12/20 at 20:37:59 UTC smartmontools build host: x86_64-unknown-linux-gnu smartmontools build configured: 2007/09/12 22:04:20 UTC smartctl compile dated Sep 12 2007 at 22:04:32 smartmontools configure arguments: '--prefix=/usr' '--sysconfdir=/etc' '--mandir=/usr/share/man' '--with-initscriptdir=/etc/init.d' '--with-docdir=/usr/share/doc/smartmontools' 'CFLAGS=-fsigned-char -Wall -O2'
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD3200AAKS-00VYA0 Serial Number: WD-WCARW0059893 Firmware Version: 12.01B02 User Capacity: 320,072,933,376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Apr 15 07:18:40 2008 BST SMART support is: Available - device has SMART capability. SMART support is: Disabled Warning! SMART Attribute Data Structure error: invalid SMART checksum. Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x55c0) Does not save SMART data before entering power-saving mode. Error logging capability: (0x90) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 255 Unknown_Attribute 0x40ff 018 149 255 Pre-fail Always FAILING_NOW 1099503304802 255 Unknown_Attribute 0x10ff 253 034 255 Pre-fail Always FAILING_NOW 1099511627648 16 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 537001984 180 Unknown_Attribute 0x0076 129 255 118 Old_age Always - 255 34 Unknown_Attribute 0xff80 255 255 128 Old_age Offline - 268501247 87 Unknown_Attribute 0x0056 129 255 086 Old_age Always - 424013611263 255 Unknown_Attribute 0x00ff 000 000 255 Pre-fail Always FAILING_NOW 211106232532992 144 Unknown_Attribute 0x0076 129 255 118 Old_age Always - 280925807907071 255 Unknown_Attribute 0x00ff 001 016 255 Pre-fail Always FAILING_NOW 0 32 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 422166540288 255 Unknown_Attribute 0xc0ff 028 083 255 Pre-fail Always FAILING_NOW 1099503304787 255 Unknown_Attribute 0x10ff 253 034 255 Pre-fail Always FAILING_NOW 1099511627648 16 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 537001984 65 Unknown_Attribute 0x0060 129 255 096 Old_age Offline - 255 34 Unknown_Attribute 0xff80 255 255 128 Old_age Offline - 268501247 102 Unknown_Attribute 0x0062 129 255 098 Old_age Always - 414351491327 255 Unknown_Attribute 0x00ff 000 000 255 Pre-fail Always FAILING_NOW 211106232532992 144 Unknown_Attribute 0x0076 129 255 118 Old_age Always - 280925807907071 255 Unknown_Attribute 0x00ff 001 016 255 Pre-fail Always FAILING_NOW 0 32 Unknown_Attribute 0x0000 000 000 000 Old_age Offline FAILING_NOW 422619164672 255 Unknown_Attribute 0xc0ff 147 084 255 Pre-fail Always FAILING_NOW 1099503304789 Warning! SMART ATA Error Log Structure error: invalid SMART checksum. SMART Error Log Version: 0 No Errors Logged Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 0 Warning: ATA Specification requires self-test log structure revision number = 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging
[ 0.000000] Linux version 2.6.24.3 (tvrtko@sol) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #4 SMP PREEMPT Sat Mar 8 12:57:56 GMT 2008 [ 0.000000] Command line: root=UUID=5781d9c0-be35-41cc-9eca-64e5d8fffbe4 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077000000 (usable) [ 0.000000] BIOS-e820: 0000000077000000 - 000000007f000000 (reserved) [ 0.000000] BIOS-e820: 000000007f000000 - 000000007fdf0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 520192, 523760) 2 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F6600, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FEF3040, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FEF30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FEF3180, 52C6 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FEF1800, 0040 [ 0.000000] ACPI: HPET 7FEF85C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FEF8640, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7FEF84C0, 0098 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7FEF8CE0, 02FC (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 520192, 523760) 2 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 487424 [ 0.000000] 0: 520192 -> 523760 [ 0.000000] On node 0 totalpages: 490894 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1031 pages reserved [ 0.000000] DMA zone: 2911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7104 pages used for memmap [ 0.000000] DMA32 zone: 479792 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 0000000077000000 - 000000007f000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32496 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 482703 [ 0.000000] Kernel command line: root=UUID=5781d9c0-be35-41cc-9eca-64e5d8fffbe4 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 16.820956] time.c: Detected 2333.332 MHz processor. [ 16.823422] Console: colour VGA+ 80x25 [ 16.823425] console [tty0] enabled [ 16.824597] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 16.825441] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.825570] Checking aperture... [ 16.840754] Memory: 1922140k/2095040k available (2186k kernel code, 40844k reserved, 1139k data, 220k init) [ 16.840788] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.899786] Calibrating delay using timer specific routine.. 4670.28 BogoMIPS (lpj=2335142) [ 16.899807] Security Framework initialized [ 16.899816] Capability LSM initialized [ 16.899825] Mount-cache hash table entries: 256 [ 16.899934] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.899936] CPU: L2 cache: 4096K [ 16.899937] using mwait in idle threads. [ 16.899939] CPU: Physical Processor ID: 0 [ 16.899940] CPU: Processor Core ID: 0 [ 16.899945] CPU0: Thermal monitoring enabled (TM2) [ 16.899954] SMP alternatives: switching to UP code [ 16.900359] ACPI: Core revision 20070126 [ 16.914056] Using local APIC timer interrupts. [ 16.956833] APIC timer calibration result 20833325 [ 16.956835] Detected 20.833 MHz APIC timer. [ 16.956909] SMP alternatives: switching to SMP code [ 16.957202] Booting processor 1/2 APIC 0x1 [ 16.968700] Initializing CPU#1 [ 17.027699] Calibrating delay using timer specific routine.. 4666.63 BogoMIPS (lpj=2333319) [ 17.027704] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.027706] CPU: L2 cache: 4096K [ 17.027707] CPU: Physical Processor ID: 0 [ 17.027708] CPU: Processor Core ID: 1 [ 17.027713] CPU1: Thermal monitoring enabled (TM2) [ 17.028112] Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 17.028165] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 17.048145] Brought up 2 CPUs [ 17.048324] net_namespace: 120 bytes [ 17.048570] NET: Registered protocol family 16 [ 17.048685] ACPI: bus type pci registered [ 17.049815] PCI: Using MMCONFIG at e0000000 - e1ffffff [ 17.050287] mtrr: your CPUs had inconsistent fixed MTRR settings [ 17.050288] mtrr: probably your BIOS does not setup all CPUs. [ 17.050289] mtrr: corrected configuration. [ 17.051277] ACPI: EC: Look up EC in DSDT [ 17.055694] ACPI: Interpreter enabled [ 17.055696] ACPI: (supports S0 S1 S4 S5) [ 17.055707] ACPI: Using IOAPIC for interrupt routing [ 17.062136] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.063245] PCI: Transparent bridge - 0000:00:0a.0 [ 17.063381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.063556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 17.102749] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.102871] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.102992] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 17.103111] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.103230] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.103348] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.103467] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.103587] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.103707] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.103826] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 17.103945] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 17.104064] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 17.104187] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0 [ 17.104306] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0 [ 17.104426] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 17.104545] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 17.104668] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.104788] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 17.104910] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 17.105032] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 17.105182] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 17.105325] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 17.105467] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 17.105612] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 17.105754] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 17.105895] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 17.106037] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 17.106178] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 17.106320] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 17.106462] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 17.106607] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 17.106750] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 17.106892] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 17.107035] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 17.107178] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 17.107321] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 17.107463] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 17.107607] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 17.107751] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 17.107895] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 17.107988] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.108007] pnp: PnP ACPI init [ 17.108014] ACPI: bus type pnp registered [ 17.111200] pnp: PnP ACPI: found 12 devices [ 17.111202] ACPI: ACPI bus type pnp unregistered [ 17.111332] PCI: Using ACPI for IRQ routing [ 17.111334] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.114602] PCI-GART: No AMD northbridge found. [ 17.114609] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 17.114612] hpet0: 3 32-bit timers, 25000000 Hz [ 17.116602] Time: tsc clocksource has been installed. [ 17.118665] system 00:01: ioport range 0x1000-0x107f has been reserved [ 17.118668] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 17.118670] system 00:01: ioport range 0x1400-0x147f has been reserved [ 17.118672] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 17.118674] system 00:01: ioport range 0x1800-0x187f has been reserved [ 17.118676] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 17.118678] system 00:01: iomem range 0x0-0x0 could not be reserved [ 17.118681] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 17.118683] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 17.118685] system 00:01: iomem range 0x77000000-0x7effffff could not be reserved [ 17.118690] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 17.118692] system 00:02: ioport range 0x800-0x87f has been reserved [ 17.118694] system 00:02: ioport range 0x295-0x314 has been reserved [ 17.118696] system 00:02: ioport range 0x290-0x294 has been reserved [ 17.118698] system 00:02: ioport range 0x880-0x88f has been reserved [ 17.118705] system 00:0a: iomem range 0xe0000000-0xe1ffffff could not be reserved [ 17.118710] system 00:0b: iomem range 0xd0000-0xd3fff has been reserved [ 17.118712] system 00:0b: iomem range 0xd6800-0xd7fff has been reserved [ 17.118714] system 00:0b: iomem range 0xf0000-0xfbfff could not be reserved [ 17.118716] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 17.118718] system 00:0b: iomem range 0x7fef0000-0x7fefffff could not be reserved [ 17.118721] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 17.118723] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 17.118725] system 00:0b: iomem range 0x100000-0x7feeffff could not be reserved [ 17.118727] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 17.118729] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 17.119012] PCI: Bridge: 0000:00:0a.0 [ 17.119013] IO window: disabled. [ 17.119016] MEM window: e5000000-e50fffff [ 17.119017] PREFETCH window: disabled. [ 17.119019] PCI: Bridge: 0000:00:0b.0 [ 17.119020] IO window: 9000-9fff [ 17.119022] MEM window: disabled. [ 17.119023] PREFETCH window: disabled. [ 17.119024] PCI: Bridge: 0000:00:0c.0 [ 17.119025] IO window: b000-bfff [ 17.119027] MEM window: disabled. [ 17.119028] PREFETCH window: disabled. [ 17.119029] PCI: Bridge: 0000:00:0d.0 [ 17.119031] IO window: a000-afff [ 17.119032] MEM window: disabled. [ 17.119033] PREFETCH window: disabled. [ 17.119038] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 17.119043] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 17.119047] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 17.119051] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 17.119057] NET: Registered protocol family 2 [ 17.127833] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 17.128068] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 17.129443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 17.130010] TCP: Hash tables configured (established 262144 bind 65536) [ 17.130012] TCP reno registered [ 17.132985] checking if image is initramfs... it is [ 17.380845] Switched to high resolution mode on CPU 1 [ 17.381362] Switched to high resolution mode on CPU 0 [ 17.498896] Freeing initrd memory: 4812k freed [ 17.503068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 17.503072] io scheduler noop registered [ 17.503073] io scheduler anticipatory registered [ 17.503075] io scheduler deadline registered [ 17.503140] io scheduler cfq registered (default) [ 17.520284] Boot video device is 0000:00:10.0 [ 17.520397] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 17.520409] assign_interrupt_mode Found MSI capability [ 17.520420] Allocate Port Service[0000:00:0b.0:pcie00] [ 17.520445] Allocate Port Service[0000:00:0b.0:pcie03] [ 17.520480] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 17.520491] assign_interrupt_mode Found MSI capability [ 17.520499] Allocate Port Service[0000:00:0c.0:pcie00] [ 17.520522] Allocate Port Service[0000:00:0c.0:pcie03] [ 17.520557] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 17.520567] assign_interrupt_mode Found MSI capability [ 17.520576] Allocate Port Service[0000:00:0d.0:pcie00] [ 17.520599] Allocate Port Service[0000:00:0d.0:pcie03] [ 17.522164] Real Time Clock Driver v1.12ac [ 17.522286] hpet_resources: 0xfeff0000 is busy [ 17.522307] Linux agpgart interface v0.102 [ 17.522309] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.522403] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.522717] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.523188] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.523272] PNP: No PS/2 controller found. Probing ports directly. [ 17.523591] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.523594] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.523661] mice: PS/2 mouse device common for all mice [ 17.523691] cpuidle: using governor ladder [ 17.523693] cpuidle: using governor menu [ 17.523745] TCP cubic registered [ 17.523782] NET: Registered protocol family 1 [ 17.523871] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.523877] Freeing unused kernel memory: 220k freed [ 18.634348] fuse init (API version 7.9) [ 18.639655] ACPI: SSDT 7FEF86C0, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 18.639897] ACPI: SSDT 7FEF8B80, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 18.640037] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 18.640045] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 18.790788] usbcore: registered new interface driver usbfs [ 18.790808] usbcore: registered new interface driver hub [ 18.791177] usbcore: registered new device driver usb [ 18.792065] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 18.792355] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 18.792362] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 18.793664] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.793669] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 18.793766] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 18.793780] ohci_hcd 0000:00:04.0: irq 23, io mem 0xe5108000 [ 18.821728] SCSI subsystem initialized [ 18.837738] libata version 3.00 loaded. [ 18.846547] usb usb1: configuration #1 chosen from 1 choice [ 18.846565] hub 1-0:1.0: USB hub found [ 18.846570] hub 1-0:1.0: 10 ports detected [ 18.947629] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22 [ 18.947635] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 18.948717] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 18.948721] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 18.948764] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 18.948788] ehci_hcd 0000:00:04.1: debug port 1 [ 18.948790] PCI: cache line size of 32 is not supported by device 0000:00:04.1 [ 18.948800] ehci_hcd 0000:00:04.1: irq 22, io mem 0xe5107000 [ 18.954250] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 18.954338] usb usb2: configuration #1 chosen from 1 choice [ 18.954357] hub 2-0:1.0: USB hub found [ 18.954362] hub 2-0:1.0: 10 ports detected [ 19.055568] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 19.055573] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 19.111977] firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI version 1.10 [ 19.112013] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 19.112301] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 19.112306] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 19.112310] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 19.493288] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 19.611111] firewire_core: created new fw device fw0 (0 config rom retries, S400) [ 19.624655] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:59:db:59 [ 19.624658] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 19.626547] ahci 0000:00:0e.0: version 3.0 [ 19.626791] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 19.626795] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 19.628233] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.628238] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.684889] usb 1-2: configuration #1 chosen from 1 choice [ 19.695856] usbcore: registered new interface driver hiddev [ 19.702000] input: BTC USB Multimedia Cordless Kit as /class/input/input0 [ 19.706904] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 19.720252] input: BTC USB Multimedia Cordless Kit as /class/input/input1 [ 19.725902] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 19.725911] usbcore: registered new interface driver usbhid [ 19.725913] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.626248] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 20.626252] ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio [ 20.626254] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 20.626509] scsi0 : ahci [ 20.626630] scsi1 : ahci [ 20.626723] scsi2 : ahci [ 20.626814] scsi3 : ahci [ 20.626877] ata1: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 316 [ 20.626879] ata2: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 316 [ 20.626880] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 316 [ 20.626882] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 316 [ 20.930694] ata1: SATA link down (SStatus 0 SControl 300) [ 21.538595] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 21.555434] ata2.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133 [ 21.555437] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 21.556174] ata2.00: configured for UDMA/133 [ 22.163469] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.164555] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100, ATAPI AN [ 22.316045] ata3.00: configured for UDMA/100 [ 22.619646] ata4: SATA link down (SStatus 0 SControl 300) [ 22.619728] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 22.620347] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5 [ 22.620424] NFORCE-MCP73: IDE controller (0x10de:0x056c rev 0xa1) at PCI slot 0000:00:08.0 [ 22.620444] NFORCE-MCP73: not 100% native mode: will probe irqs later [ 22.620449] NFORCE-MCP73: 0000:00:08.0 (rev a1) UDMA133 controller [ 22.620453] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 22.620458] NFORCE-MCP73: IDE port disabled [ 22.620461] Probing IDE interface ide0... [ 22.625484] Driver 'sd' needs updating - please use bus_type methods [ 22.625529] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 22.625537] sd 1:0:0:0: [sda] Write Protect is off [ 22.625539] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.625550] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.625580] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 22.625586] sd 1:0:0:0: [sda] Write Protect is off [ 22.625588] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.625599] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.625601] sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods [ 22.633148] sda5 sda6 sda7 sda8 sda9 > [ 22.659350] sd 1:0:0:0: [sda] Attached SCSI disk [ 22.661687] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 22.661701] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 22.665172] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 22.665174] Uniform CD-ROM driver Revision: 3.20 [ 22.665204] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 22.992032] Attempting manual resume [ 22.992034] swsusp: Resume From Partition 8:2 [ 22.992035] PM: Checking swsusp image. [ 22.992146] PM: Resume from disk failed. [ 22.995770] JFS: nTxBlock = 8192, nTxLock = 65536 [ 27.244643] input: Power Button (FF) as /class/input/input2 [ 27.257283] ACPI: Power Button (FF) [PWRF] [ 27.257319] input: Power Button (CM) as /class/input/input3 [ 27.273257] ACPI: Power Button (CM) [PWRB] [ 27.812316] nvidia: module license 'NVIDIA' taints kernel. [ 27.842200] input: PC Speaker as /class/input/input4 [ 27.980345] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 27.980349] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 27.981263] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 28.112692] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 28.112695] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 22 [ 28.112701] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 28.112841] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 29.130156] it87: Found IT8718F chip at 0x290, revision 4 [ 29.130167] it87: in3 is VCC (+5V) [ 29.134510] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 29.134541] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 29.181796] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 29.643543] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx [ 30.271222] kjournald starting. Commit interval 5 seconds [ 30.279044] EXT3 FS on sda1, internal journal [ 30.279048] EXT3-fs: mounted filesystem with ordered data mode. [ 31.709918] No dock devices found. [ 34.487709] NET: Registered protocol family 10 [ 34.487889] lo: Disabled Privacy Extensions [ 42.687068] Bluetooth: Core ver 2.11 [ 42.687265] NET: Registered protocol family 31 [ 42.687268] Bluetooth: HCI device and connection manager initialized [ 42.687270] Bluetooth: HCI socket layer initialized [ 42.694447] Bluetooth: L2CAP ver 2.9 [ 42.694452] Bluetooth: L2CAP socket layer initialized [ 42.697192] Bluetooth: RFCOMM socket layer initialized [ 42.697205] Bluetooth: RFCOMM TTY layer initialized [ 42.697206] Bluetooth: RFCOMM ver 1.8 [ 43.081739] [4864]: VMCI: Driver initialized. [ 43.081763] [4864]: Module vmmon: registered with major=10 minor=165 [ 43.081772] [4864]: Module vmmon: initialized [ 43.165373] /dev/vmnet: open called by PID 4887 (vmnet-bridge) [ 43.165379] /dev/vmnet: hub 0 does not exist, allocating memory. [ 43.165387] /dev/vmnet: port on hub 0 successfully opened [ 43.165398] bridge-eth0: enabling the bridge [ 43.165401] bridge-eth0: up [ 43.165402] bridge-eth0: already up [ 43.165403] bridge-eth0: attached [ 43.190584] /dev/vmnet: open called by PID 4893 (vmnet-netifup) [ 43.190591] /dev/vmnet: hub 1 does not exist, allocating memory. [ 43.190599] /dev/vmnet: port on hub 1 successfully opened [ 43.202172] /dev/vmnet: open called by PID 4909 (vmnet-netifup) [ 43.202256] /dev/vmnet: hub 8 does not exist, allocating memory. [ 43.202331] /dev/vmnet: port on hub 8 successfully opened [ 43.243718] /dev/vmnet: open called by PID 4917 (vmnet-natd) [ 43.243728] /dev/vmnet: port on hub 8 successfully opened [ 43.343152] /dev/vmnet: open called by PID 4924 (vmnet-dhcpd) [ 43.343160] /dev/vmnet: port on hub 8 successfully opened [ 43.362568] /dev/vmnet: open called by PID 4925 (vmnet-dhcpd) [ 43.362574] /dev/vmnet: port on hub 1 successfully opened [ 46.943492] NET: Registered protocol family 17 [ 53.601567] vmnet1: no IPv6 routers present [ 53.763505] vmnet8: no IPv6 routers present [ 61.686093] eth0: no IPv6 routers present [17030.737907] CIFS VFS: cifs_mount failed w/return code = -13 [17065.594524] CIFS VFS: cifs_mount failed w/return code = -13 [17118.163561] CIFS VFS: cifs_mount failed w/return code = -13 [17131.624947] CIFS VFS: cifs_mount failed w/return code = -13 [17153.254275] CIFS VFS: cifs_mount failed w/return code = -13 [17179.473085] CIFS VFS: cifs_mount failed w/return code = -13 [17216.154587] CIFS VFS: cifs_mount failed w/return code = -13 [26924.992029] bridge-eth0: disabling the bridge [26924.997939] bridge-eth0: down [26925.183366] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [26926.732844] PM: suspend-to-disk mode set to 'shutdown' [26926.732990] swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000 [26926.732995] swsusp: Marking nosave pages: 0000000077000000 - 000000007f000000 [26926.733716] swsusp: Basic memory bitmaps created [26926.733717] Syncing filesystems ... done. [26926.762925] Freezing user space processes ... (elapsed 0.00 seconds) done. [26926.763241] Freezing remaining freezable tasks ... (elapsed 1.59 seconds) done. [26928.358493] Shrinking memory... -\|/-\|/-\|/-\|/-\|done (253770 pages freed) [26930.721021] Freed 1015080 kbytes in 2.36 seconds (430.11 MB/s) [26930.721023] Suspending console(s) [26930.921337] sd 1:0:0:0: [sda] Synchronizing SCSI cache [26930.923012] ACPI handle has no context! [26930.923241] serial 00:08: disabled [26930.923277] ACPI handle has no context! [26930.933325] NVRM: RmPowerManagement: 3 [26931.125955] ACPI: PCI interrupt for device 0000:00:09.0 disabled [26931.137023] ACPI: PCI interrupt for device 0000:00:04.1 disabled [26931.147924] ACPI: PCI interrupt for device 0000:00:04.0 disabled [26931.159324] Disabling non-boot CPUs ... [26931.264679] CPU 1 is now offline [26931.264682] SMP alternatives: switching to UP code [26931.265774] CPU1 is down [26931.265914] swsusp: critical section: [26931.303274] swsusp: Need to copy 120439 pages [26931.303276] swsusp: Normal pages needed: 120439 + 1024 + 38, available pages: 370448 [ 29.894092] Enabling non-boot CPUs ... [ 29.896483] SMP alternatives: switching to SMP code [ 29.897234] Booting processor 1/2 APIC 0x1 [ 29.907581] Initializing CPU#1 [ 29.967281] Calibrating delay using timer specific routine.. 4666.93 BogoMIPS (lpj=2333466) [ 29.967286] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.967288] CPU: L2 cache: 4096K [ 29.967290] CPU: Physical Processor ID: 0 [ 29.967290] CPU: Processor Core ID: 1 [ 29.967687] Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 29.967729] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 29.987961] CPU1 is up [ 29.988711] Switched to high resolution mode on CPU 1 [ 29.999272] PCI: Enabling device 0000:00:04.0 (0000 -> 0002) [ 29.999276] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 29.999280] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 29.999285] PM: Writing back config space on device 0000:00:04.0 at offset f (was 1030100, writing 103010b) [ 29.999291] PM: Writing back config space on device 0000:00:04.0 at offset 4 (was 0, writing e5108000) [ 29.999295] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was b00006, writing b00007) [ 30.010216] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 30.010219] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 30.010234] usb usb2: root hub lost power or was reset [ 30.010241] ehci_hcd 0000:00:04.1: debug port 1 [ 30.010243] PCI: cache line size of 32 is not supported by device 0000:00:04.1 [ 30.021244] PM: Writing back config space on device 0000:00:09.0 at offset 1 (was b00006, writing b00002) [ 30.021251] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 30.021255] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.021274] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 30.021286] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.021299] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.021310] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.021319] PM: Writing back config space on device 0000:00:0e.0 at offset 1 (was b00403, writing b00407) [ 30.021329] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.021348] PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was b00007, writing b00003) [ 30.021366] NVRM: RmPowerManagement: 5 [ 30.166955] PM: Writing back config space on device 0000:01:07.0 at offset f (was 4020100, writing 402010a) [ 30.166966] PM: Writing back config space on device 0000:01:07.0 at offset 5 (was 0, writing e5000000) [ 30.166970] PM: Writing back config space on device 0000:01:07.0 at offset 4 (was 0, writing e5004000) [ 30.166973] PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 0, writing 2008) [ 30.166977] PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2100000, writing 2100006) [ 30.224505] serial 00:08: activated [ 30.276707] usb usb1: root hub lost power or was reset [ 30.325606] ata1: SATA link down (SStatus 0 SControl 300) [ 30.325616] ata4: SATA link down (SStatus 0 SControl 300) [ 30.527227] sd 1:0:0:0: [sda] Starting disk [ 30.629024] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 30.629052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.637718] ata2.00: configured for UDMA/133 [ 30.641379] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 30.641389] sd 1:0:0:0: [sda] Write Protect is off [ 30.641391] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.641405] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.641453] PM: Image restored successfully. [ 30.673355] Restarting tasks ... <6>usb 1-2: USB disconnect, address 2 [ 30.674179] done. [ 30.675193] swsusp: Basic memory bitmaps freed [ 30.932285] ata3.00: configured for UDMA/100 [ 31.206916] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 31.398590] usb 1-2: configuration #1 chosen from 1 choice [ 31.412711] input: BTC USB Multimedia Cordless Kit as /class/input/input5 [ 31.419523] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 31.432992] input: BTC USB Multimedia Cordless Kit as /class/input/input6 [ 31.442602] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 34.856002] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 34.856026] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 34.856031] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 35.367877] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:59:db:59 [ 35.367883] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 35.579445] eth0: no link during initialization. [ 35.583296] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.583299] bridge-eth0: enabling the bridge [ 35.583302] bridge-eth0: up [ 36.542758] eth0: link up. [ 36.545859] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.064439] input: Power Button (FF) as /class/input/input7 [ 38.071816] ACPI: Power Button (FF) [PWRF] [ 38.071859] input: Power Button (CM) as /class/input/input8 [ 38.083678] ACPI: Power Button (CM) [PWRB] [ 55.662103] eth0: no IPv6 routers present [ 376.174004] CIFS VFS: No response for cmd 50 mid 31713 [ 7786.218334] npviewer.bin[24121]: segfault at 1 rip f7a7baf7 rsp ffe3bf44 error 4 [24893.254516] npviewer.bin[29513]: segfault at f77c85de rip f7aaa0ed rsp ffb90540 error 7 [24893.254519] npviewer.bin[29530]: segfault at f77c85de rip f7aaa0ed rsp f5b70d80 error 7 [25078.778898] npviewer.bin[29705]: segfault at f77c8599 rip f7aaa0ed rsp f5b70d80 error 7 [25078.778902] npviewer.bin[29688]: segfault at f77c8599 rip f7aaa0ed rsp ffa003b0 error 7 [25478.360380] npviewer.bin[30026]: segfault at f77505c9 rip f7a51745 rsp f52f7cc0 error 7 [25478.360383] npviewer.bin[29991]: segfault at f77505c9 rip f7a51745 rsp ff89c180 error 7 [27243.199530] sr0: CDROM not ready yet. [27245.238219] sr0: CDROM not ready yet. [27247.255134] sr0: CDROM not ready. Make sure there is a disc in the drive. [27248.256161] sr0: CDROM not ready. Make sure there is a disc in the drive. [27249.256204] sr0: CDROM not ready. Make sure there is a disc in the drive. [27250.256268] sr0: CDROM not ready. Make sure there is a disc in the drive. [27251.256385] sr0: CDROM not ready. Make sure there is a disc in the drive. [27252.256483] sr0: CDROM not ready. Make sure there is a disc in the drive. [27253.256531] sr0: CDROM not ready. Make sure there is a disc in the drive. [27254.256633] sr0: CDROM not ready. Make sure there is a disc in the drive. [27255.256725] sr0: CDROM not ready. Make sure there is a disc in the drive. [27256.256822] sr0: CDROM not ready. Make sure there is a disc in the drive. [27257.256873] sr0: CDROM not ready. Make sure there is a disc in the drive. [27258.256958] sr0: CDROM not ready. Make sure there is a disc in the drive. [27259.257047] sr0: CDROM not ready. Make sure there is a disc in the drive. [27260.257133] sr0: CDROM not ready. Make sure there is a disc in the drive. [27261.257244] sr0: CDROM not ready. Make sure there is a disc in the drive. [27262.257314] sr0: CDROM not ready. Make sure there is a disc in the drive. [27263.257382] sr0: CDROM not ready. Make sure there is a disc in the drive. [27264.257498] sr0: CDROM not ready. Make sure there is a disc in the drive. [27265.257582] sr0: CDROM not ready. Make sure there is a disc in the drive. [27266.257640] sr0: CDROM not ready. Make sure there is a disc in the drive. [27267.257755] sr0: CDROM not ready. Make sure there is a disc in the drive. [27268.257843] sr0: CDROM not ready. Make sure there is a disc in the drive. [27269.257895] sr0: CDROM not ready. Make sure there is a disc in the drive. [27270.258008] sr0: CDROM not ready. Make sure there is a disc in the drive. [27271.258101] sr0: CDROM not ready. Make sure there is a disc in the drive. [27272.258152] sr0: CDROM not ready. Make sure there is a disc in the drive. [27273.258251] sr0: CDROM not ready. Make sure there is a disc in the drive. [27274.258347] sr0: CDROM not ready. Make sure there is a disc in the drive. [27275.258413] sr0: CDROM not ready. Make sure there is a disc in the drive. [27276.258520] sr0: CDROM not ready. Make sure there is a disc in the drive. [27277.258618] sr0: CDROM not ready. Make sure there is a disc in the drive. [27278.258668] sr0: CDROM not ready. Make sure there is a disc in the drive. [27279.258971] sr0: CDROM not ready. Make sure there is a disc in the drive. [27280.157397] sr0: CDROM not ready. Make sure there is a disc in the drive. [27280.258904] sr0: CDROM not ready. Make sure there is a disc in the drive. [27281.258931] sr0: CDROM not ready. Make sure there is a disc in the drive. [27282.259034] sr0: CDROM not ready. Make sure there is a disc in the drive. [27283.259094] sr0: CDROM not ready. Make sure there is a disc in the drive. [27284.259180] sr0: CDROM not ready. Make sure there is a disc in the drive. [27285.259307] sr0: CDROM not ready. Make sure there is a disc in the drive. [27286.259386] sr0: CDROM not ready. Make sure there is a disc in the drive. [27287.259480] sr0: CDROM not ready. Make sure there is a disc in the drive. [27288.259525] sr0: CDROM not ready. Make sure there is a disc in the drive. [27289.259612] sr0: CDROM not ready. Make sure there is a disc in the drive. [27290.259940] sr0: CDROM not ready. Make sure there is a disc in the drive. [27291.259821] sr0: CDROM not ready. Make sure there is a disc in the drive. [27292.259898] sr0: CDROM not ready. Make sure there is a disc in the drive. [27293.296230] sr0: CDROM not ready yet. [27295.334928] sr0: CDROM not ready yet. [27297.373590] sr0: CDROM not ready yet. [27299.412293] sr0: CDROM not ready yet. [27301.450981] sr0: CDROM not ready yet. [27304.623771] end_request: I/O error, dev sr0, sector 0 [27304.623776] Buffer I/O error on device sr0, logical block 0 [27304.623780] Buffer I/O error on device sr0, logical block 1 [27304.623783] Buffer I/O error on device sr0, logical block 2 [27304.623785] Buffer I/O error on device sr0, logical block 3 [27304.623787] Buffer I/O error on device sr0, logical block 4 [27304.623790] Buffer I/O error on device sr0, logical block 5 [27304.623792] Buffer I/O error on device sr0, logical block 6 [27304.623795] Buffer I/O error on device sr0, logical block 7 [27304.625137] end_request: I/O error, dev sr0, sector 0 [27304.625140] Buffer I/O error on device sr0, logical block 0 [27304.626513] end_request: I/O error, dev sr0, sector 4 [27304.626516] Buffer I/O error on device sr0, logical block 1 [27304.627883] end_request: I/O error, dev sr0, sector 0 [27304.629261] end_request: I/O error, dev sr0, sector 4 [27304.630634] end_request: I/O error, dev sr0, sector 0 [27304.632012] end_request: I/O error, dev sr0, sector 4 [27304.633384] end_request: I/O error, dev sr0, sector 0 [27304.634763] end_request: I/O error, dev sr0, sector 4 [27304.636136] end_request: I/O error, dev sr0, sector 0 [27304.638103] end_request: I/O error, dev sr0, sector 4 [27304.639478] end_request: I/O error, dev sr0, sector 0 [27304.640856] end_request: I/O error, dev sr0, sector 4 [27304.642230] end_request: I/O error, dev sr0, sector 0 [27304.643610] end_request: I/O error, dev sr0, sector 4 [27304.644983] end_request: I/O error, dev sr0, sector 0 [27304.646362] end_request: I/O error, dev sr0, sector 4 [27304.647736] end_request: I/O error, dev sr0, sector 0 [27304.649115] end_request: I/O error, dev sr0, sector 4 [27304.650489] end_request: I/O error, dev sr0, sector 0 [27304.651866] end_request: I/O error, dev sr0, sector 4 [27304.653242] end_request: I/O error, dev sr0, sector 0 [27304.654621] end_request: I/O error, dev sr0, sector 4 [27304.655994] end_request: I/O error, dev sr0, sector 0 [27304.657373] end_request: I/O error, dev sr0, sector 4 [27304.659338] end_request: I/O error, dev sr0, sector 0 [27304.660715] end_request: I/O error, dev sr0, sector 4 [27304.662091] end_request: I/O error, dev sr0, sector 0 [27304.663468] end_request: I/O error, dev sr0, sector 4 [27304.664844] end_request: I/O error, dev sr0, sector 0 [27304.666220] end_request: I/O error, dev sr0, sector 4 [27304.667597] end_request: I/O error, dev sr0, sector 0 [27304.668973] end_request: I/O error, dev sr0, sector 4 [27304.670350] end_request: I/O error, dev sr0, sector 0 [27304.671727] end_request: I/O error, dev sr0, sector 4 [27304.673103] end_request: I/O error, dev sr0, sector 0 [27304.674479] end_request: I/O error, dev sr0, sector 4 [27304.675855] end_request: I/O error, dev sr0, sector 0 [27304.677232] end_request: I/O error, dev sr0, sector 4 [27304.678608] end_request: I/O error, dev sr0, sector 0 [27304.680574] end_request: I/O error, dev sr0, sector 4 [27304.681948] end_request: I/O error, dev sr0, sector 0 [27304.683327] end_request: I/O error, dev sr0, sector 4 [27304.684701] end_request: I/O error, dev sr0, sector 0 [27304.686080] end_request: I/O error, dev sr0, sector 4 [27304.687455] end_request: I/O error, dev sr0, sector 0 [27304.688832] end_request: I/O error, dev sr0, sector 4 [27304.690206] end_request: I/O error, dev sr0, sector 0 [27304.691586] end_request: I/O error, dev sr0, sector 4 [27304.692959] end_request: I/O error, dev sr0, sector 0 [27304.694338] end_request: I/O error, dev sr0, sector 4 [27304.695712] end_request: I/O error, dev sr0, sector 0 [27304.697091] end_request: I/O error, dev sr0, sector 4 [27304.698465] end_request: I/O error, dev sr0, sector 0 [27304.699844] end_request: I/O error, dev sr0, sector 4 [27304.827167] end_request: I/O error, dev sr0, sector 0 [27304.829133] end_request: I/O error, dev sr0, sector 4 [27304.830507] end_request: I/O error, dev sr0, sector 0 [27304.831886] end_request: I/O error, dev sr0, sector 4 [27633.478052] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [27633.478061] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [27633.478062] cdb 1b 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 [27633.478063] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [27633.478066] ata3.00: status: { DRDY } [27633.478073] ata3: hard resetting link [27634.088877] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27634.480533] ata3.00: configured for UDMA/100 [27634.480543] ata3: EH complete [27662.800986] sr0: CDROM not ready. Make sure there is a disc in the drive. [27672.782175] sr0: CDROM not ready. Make sure there is a disc in the drive. [55128.897815] bridge-eth0: disabling the bridge [55128.900941] bridge-eth0: down [55128.996792] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [55130.517763] PM: suspend-to-disk mode set to 'shutdown' [55130.517916] swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000 [55130.517921] swsusp: Marking nosave pages: 0000000077000000 - 000000007f000000 [55130.518639] swsusp: Basic memory bitmaps created [55130.518641] Syncing filesystems ... done. [55130.540753] Freezing user space processes ... (elapsed 0.00 seconds) done. [55130.541101] Freezing remaining freezable tasks ... (elapsed 6.93 seconds) done. [55137.459562] Shrinking memory... -\|/-\|/-\|/-\done (191473 pages freed) [55139.814898] Freed 765892 kbytes in 2.35 seconds (325.91 MB/s) [55139.814900] Suspending console(s) [55140.016416] sd 1:0:0:0: [sda] Synchronizing SCSI cache [55140.016604] ACPI handle has no context! [55140.016827] serial 00:08: disabled [55140.016864] ACPI handle has no context! [55140.027404] NVRM: RmPowerManagement: 3 [55140.220036] ACPI: PCI interrupt for device 0000:00:09.0 disabled [55140.231095] ACPI: PCI interrupt for device 0000:00:04.1 disabled [55140.242005] ACPI: PCI interrupt for device 0000:00:04.0 disabled [55140.253405] Disabling non-boot CPUs ... [55140.358760] CPU 1 is now offline [55140.358763] SMP alternatives: switching to UP code [55140.359889] CPU1 is down [55140.360028] swsusp: critical section: [55140.399385] swsusp: Need to copy 124487 pages [55140.399388] swsusp: Normal pages needed: 124487 + 1024 + 38, available pages: 366397 [ 29.948252] Enabling non-boot CPUs ... [ 29.950611] SMP alternatives: switching to SMP code [ 29.951364] Booting processor 1/2 APIC 0x1 [ 29.961711] Initializing CPU#1 [ 30.021410] Calibrating delay using timer specific routine.. 4666.90 BogoMIPS (lpj=2333450) [ 30.021415] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.021417] CPU: L2 cache: 4096K [ 30.021418] CPU: Physical Processor ID: 0 [ 30.021419] CPU: Processor Core ID: 1 [ 30.021816] Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 30.021856] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 30.042093] CPU1 is up [ 30.042837] Switched to high resolution mode on CPU 1 [ 30.053386] PCI: Enabling device 0000:00:04.0 (0000 -> 0002) [ 30.053390] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 30.053394] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 30.053398] PM: Writing back config space on device 0000:00:04.0 at offset f (was 1030100, writing 103010b) [ 30.053405] PM: Writing back config space on device 0000:00:04.0 at offset 4 (was 0, writing e5108000) [ 30.053408] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was b00006, writing b00007) [ 30.064379] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 30.064383] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 30.064398] usb usb2: root hub lost power or was reset [ 30.064405] ehci_hcd 0000:00:04.1: debug port 1 [ 30.064407] PCI: cache line size of 32 is not supported by device 0000:00:04.1 [ 30.075381] PM: Writing back config space on device 0000:00:09.0 at offset 1 (was b00006, writing b00002) [ 30.075389] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 30.075393] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.075412] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 30.075424] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.075436] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.075448] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.075457] PM: Writing back config space on device 0000:00:0e.0 at offset 1 (was b00403, writing b00407) [ 30.075466] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.075486] PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was b00007, writing b00003) [ 30.075504] NVRM: RmPowerManagement: 5 [ 30.221078] PM: Writing back config space on device 0000:01:07.0 at offset f (was 4020100, writing 402010a) [ 30.221090] PM: Writing back config space on device 0000:01:07.0 at offset 5 (was 0, writing e5000000) [ 30.221093] PM: Writing back config space on device 0000:01:07.0 at offset 4 (was 0, writing e5004000) [ 30.221096] PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 0, writing 2008) [ 30.221101] PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2100000, writing 2100006) [ 30.278639] serial 00:08: activated [ 30.330833] usb usb1: root hub lost power or was reset [ 30.379734] ata4: SATA link down (SStatus 0 SControl 300) [ 30.379745] ata1: SATA link down (SStatus 0 SControl 300) [ 30.582345] sd 1:0:0:0: [sda] Starting disk [ 30.683149] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.683165] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 30.689050] ata2.00: configured for UDMA/133 [ 30.692716] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 30.692726] sd 1:0:0:0: [sda] Write Protect is off [ 30.692728] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.692742] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.692796] PM: Image restored successfully. [ 30.726394] Restarting tasks ... <6>usb 1-2: USB disconnect, address 3 [ 30.734505] done. [ 30.736236] swsusp: Basic memory bitmaps freed [ 30.986425] ata3.00: configured for UDMA/100 [ 31.267285] usb 1-2: new low speed USB device using ohci_hcd and address 4 [ 31.458759] usb 1-2: configuration #1 chosen from 1 choice [ 31.472803] input: BTC USB Multimedia Cordless Kit as /class/input/input9 [ 31.489635] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 31.503044] input: BTC USB Multimedia Cordless Kit as /class/input/input10 [ 31.526826] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 32.472201] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 32.472225] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 32.472229] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 32.984647] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:59:db:59 [ 32.984652] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 33.016838] eth0: no link during initialization. [ 33.020688] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.020691] bridge-eth0: enabling the bridge [ 33.020695] bridge-eth0: up [ 34.347099] eth0: link up. [ 34.350984] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.524674] input: Power Button (FF) as /class/input/input11 [ 34.536793] ACPI: Power Button (FF) [PWRF] [ 34.536835] input: Power Button (CM) as /class/input/input12 [ 34.548780] ACPI: Power Button (CM) [PWRB] [ 53.026629] eth0: no IPv6 routers present [ 220.887434] CIFS VFS: No response for cmd 50 mid 50128 [ 1646.490993] bridge-eth0: disabling the bridge [ 1646.496328] bridge-eth0: down [ 1646.590560] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [ 1648.079695] PM: suspend-to-disk mode set to 'shutdown' [ 1648.079831] swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000 [ 1648.079835] swsusp: Marking nosave pages: 0000000077000000 - 000000007f000000 [ 1648.080556] swsusp: Basic memory bitmaps created [ 1648.080557] Syncing filesystems ... done. [ 1648.102787] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1648.103104] Freezing remaining freezable tasks ... (elapsed 7.72 seconds) done. [ 1655.809473] Shrinking memory... -\|/-\|/done (112983 pages freed) [ 1657.182523] Freed 451932 kbytes in 1.37 seconds (329.87 MB/s) [ 1657.182525] Suspending console(s) [ 1657.384459] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 1657.384646] ACPI handle has no context! [ 1657.384869] serial 00:08: disabled [ 1657.384905] ACPI handle has no context! [ 1657.395447] NVRM: RmPowerManagement: 3 [ 1657.588079] ACPI: PCI interrupt for device 0000:00:09.0 disabled [ 1657.599137] ACPI: PCI interrupt for device 0000:00:04.1 disabled [ 1657.610048] ACPI: PCI interrupt for device 0000:00:04.0 disabled [ 1657.621449] Disabling non-boot CPUs ... [ 1657.726803] CPU 1 is now offline [ 1657.726806] SMP alternatives: switching to UP code [ 1657.727888] CPU1 is down [ 1657.728027] swsusp: critical section: [ 1657.766803] swsusp: Need to copy 108235 pages [ 1657.766805] swsusp: Normal pages needed: 108235 + 1024 + 38, available pages: 382652 [ 29.914763] Enabling non-boot CPUs ... [ 29.917152] SMP alternatives: switching to SMP code [ 29.917906] Booting processor 1/2 APIC 0x1 [ 29.928253] Initializing CPU#1 [ 29.987958] Calibrating delay using timer specific routine.. 4666.90 BogoMIPS (lpj=2333454) [ 29.987963] CPU: L1 I cache: 32K, L1 D cache: 32K [ 29.987964] CPU: L2 cache: 4096K [ 29.987966] CPU: Physical Processor ID: 0 [ 29.987967] CPU: Processor Core ID: 1 [ 29.988364] Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 29.988401] checking TSC synchronization [CPU#0 -> CPU#1]: [ 30.008365] Measured 124887420 cycles TSC warp between CPUs, turning off TSC clock. [ 30.008367] Marking TSC unstable due to check_tsc_sync_source failed [ 30.008373] Time: hpet clocksource has been installed. [ 30.008640] CPU1 is up [ 30.009386] Switched to high resolution mode on CPU 1 [ 30.019937] PCI: Enabling device 0000:00:04.0 (0000 -> 0002) [ 30.019940] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 30.019945] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 30.019949] PM: Writing back config space on device 0000:00:04.0 at offset f (was 1030100, writing 103010b) [ 30.019956] PM: Writing back config space on device 0000:00:04.0 at offset 4 (was 0, writing e5108000) [ 30.019959] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was b00006, writing b00007) [ 30.030930] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 30.030934] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 30.030949] usb usb2: root hub lost power or was reset [ 30.030955] ehci_hcd 0000:00:04.1: debug port 1 [ 30.030958] PCI: cache line size of 32 is not supported by device 0000:00:04.1 [ 30.041931] PM: Writing back config space on device 0000:00:09.0 at offset 1 (was b00006, writing b00002) [ 30.041939] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 30.041943] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.041962] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 30.041974] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.041987] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.041999] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.042008] PM: Writing back config space on device 0000:00:0e.0 at offset 1 (was b00403, writing b00407) [ 30.042017] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.042036] PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was b00007, writing b00003) [ 30.042053] NVRM: RmPowerManagement: 5 [ 30.188630] PM: Writing back config space on device 0000:01:07.0 at offset f (was 4020100, writing 402010a) [ 30.188641] PM: Writing back config space on device 0000:01:07.0 at offset 5 (was 0, writing e5000000) [ 30.188645] PM: Writing back config space on device 0000:01:07.0 at offset 4 (was 0, writing e5004000) [ 30.188648] PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 0, writing 2008) [ 30.188652] PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2100000, writing 2100006) [ 30.246177] serial 00:08: activated [ 30.298368] usb usb1: root hub lost power or was reset [ 30.346268] ata1: SATA link down (SStatus 0 SControl 300) [ 30.346278] ata4: SATA link down (SStatus 0 SControl 300) [ 30.548877] sd 1:0:0:0: [sda] Starting disk [ 30.649680] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.649696] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 30.655668] ata2.00: configured for UDMA/133 [ 30.659333] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 30.659343] sd 1:0:0:0: [sda] Write Protect is off [ 30.659345] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.659359] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.659412] PM: Image restored successfully. [ 30.690677] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4 [ 30.704037] done. [ 30.705800] swsusp: Basic memory bitmaps freed [ 30.952962] ata3.00: configured for UDMA/100 [ 31.235561] usb 1-2: new low speed USB device using ohci_hcd and address 5 [ 31.427288] usb 1-2: configuration #1 chosen from 1 choice [ 31.441373] input: BTC USB Multimedia Cordless Kit as /class/input/input13 [ 31.454178] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 31.467652] input: BTC USB Multimedia Cordless Kit as /class/input/input14 [ 31.479133] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 33.523894] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 33.523915] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 33.523920] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 34.036115] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:59:db:59 [ 34.036119] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 34.069201] eth0: no link during initialization. [ 34.073098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.073101] bridge-eth0: enabling the bridge [ 34.073105] bridge-eth0: up [ 35.094431] input: Power Button (FF) as /class/input/input15 [ 35.107176] ACPI: Power Button (FF) [PWRF] [ 35.107220] input: Power Button (CM) as /class/input/input16 [ 35.121716] ACPI: Power Button (CM) [PWRB] [ 35.419744] eth0: link up. [ 35.423325] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 50.564818] eth0: no IPv6 routers present [ 427.856088] printk: 56 messages suppressed. [ 427.856093] npviewer.bin[13266]: segfault at 34 rip f7b59950 rsp f5b67cb0 error 4 [ 5443.257675] CIFS VFS: No response for cmd 50 mid 50170 [ 6515.010138] npviewer.bin[15888]: segfault at 44 rip 44 rsp fffd2bec error 14 [ 6696.476933] npviewer.bin[15998]: segfault at 18 rip f7aa511c rsp ffc2fdc0 error 4 [ 6722.940424] npviewer.bin[16077]: segfault at 30 rip f7a9b6fe rsp f5b437d0 error 4 [16391.542469] bridge-eth0: disabling the bridge [16391.547739] bridge-eth0: down [16391.630627] ACPI: PCI interrupt for device 0000:00:0f.0 disabled [16393.062824] PM: suspend-to-disk mode set to 'shutdown' [16393.062970] swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000 [16393.062974] swsusp: Marking nosave pages: 0000000077000000 - 000000007f000000 [16393.063691] swsusp: Basic memory bitmaps created [16393.063692] Syncing filesystems ... done. [16393.100603] Freezing user space processes ... (elapsed 0.00 seconds) done. [16393.100958] Freezing remaining freezable tasks ... (elapsed 2.88 seconds) done. [16395.976265] Shrinking memory... -\|/-\|/done (106375 pages freed) [16397.160402] Freed 425500 kbytes in 1.18 seconds (360.59 MB/s) [16397.160404] Suspending console(s) [16397.162312] sd 1:0:0:0: [sda] Synchronizing SCSI cache [16397.162515] ACPI handle has no context! [16397.162712] serial 00:08: disabled [16397.162758] ACPI handle has no context! [16397.173754] NVRM: RmPowerManagement: 3 [16397.367366] ACPI: PCI interrupt for device 0000:00:09.0 disabled [16397.378423] ACPI: PCI interrupt for device 0000:00:04.1 disabled [16397.389333] ACPI: PCI interrupt for device 0000:00:04.0 disabled [16397.400733] Disabling non-boot CPUs ... [16397.506099] CPU 1 is now offline [16397.506102] SMP alternatives: switching to UP code [16397.507182] CPU1 is down [16397.507323] swsusp: critical section: [16397.545704] swsusp: Need to copy 124847 pages [16397.545707] swsusp: Normal pages needed: 124847 + 1024 + 38, available pages: 366040 [ 30.132788] Enabling non-boot CPUs ... [ 30.135168] SMP alternatives: switching to SMP code [ 30.135921] Booting processor 1/2 APIC 0x1 [ 30.146266] Initializing CPU#1 [ 30.205966] Calibrating delay using timer specific routine.. 4666.91 BogoMIPS (lpj=2333456) [ 30.205971] CPU: L1 I cache: 32K, L1 D cache: 32K [ 30.205972] CPU: L2 cache: 4096K [ 30.205974] CPU: Physical Processor ID: 0 [ 30.205975] CPU: Processor Core ID: 1 [ 30.206372] Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 30.206651] CPU1 is up [ 30.207393] Switched to high resolution mode on CPU 1 [ 30.217967] PCI: Enabling device 0000:00:04.0 (0000 -> 0002) [ 30.217971] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 30.217976] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 30.217980] PM: Writing back config space on device 0000:00:04.0 at offset f (was 1030100, writing 103010b) [ 30.217987] PM: Writing back config space on device 0000:00:04.0 at offset 4 (was 0, writing e5108000) [ 30.217990] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was b00006, writing b00007) [ 30.228940] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 30.228944] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 30.228959] usb usb2: root hub lost power or was reset [ 30.228966] ehci_hcd 0000:00:04.1: debug port 1 [ 30.228968] PCI: cache line size of 32 is not supported by device 0000:00:04.1 [ 30.239979] PM: Writing back config space on device 0000:00:09.0 at offset 1 (was b00006, writing b00002) [ 30.239987] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 30.239991] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.240010] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 30.240022] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.240035] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.240047] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.240056] PM: Writing back config space on device 0000:00:0e.0 at offset 1 (was b00403, writing b00407) [ 30.240066] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.240085] PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was b00007, writing b00003) [ 30.240107] NVRM: RmPowerManagement: 5 [ 30.383657] PM: Writing back config space on device 0000:01:07.0 at offset f (was 4020100, writing 402010a) [ 30.383668] PM: Writing back config space on device 0000:01:07.0 at offset 5 (was 0, writing e5000000) [ 30.383672] PM: Writing back config space on device 0000:01:07.0 at offset 4 (was 0, writing e5004000) [ 30.383675] PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 0, writing 2008) [ 30.383679] PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2100000, writing 2100006) [ 30.441236] serial 00:08: activated [ 30.493430] usb usb1: root hub lost power or was reset [ 30.544332] ata1: SATA link down (SStatus 0 SControl 300) [ 30.544342] ata4: SATA link down (SStatus 0 SControl 300) [ 30.743949] sd 1:0:0:0: [sda] Starting disk [ 30.847753] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 30.847781] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.861239] ata2.00: configured for UDMA/133 [ 30.864865] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 30.864875] sd 1:0:0:0: [sda] Write Protect is off [ 30.864877] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.864890] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.864928] PM: Image restored successfully. [ 30.895764] Restarting tasks ... <6>usb 1-2: USB disconnect, address 5 [ 30.910113] done. [ 30.911828] swsusp: Basic memory bitmaps freed [ 31.151023] ata3.00: configured for UDMA/100 [ 31.442611] usb 1-2: new low speed USB device using ohci_hcd and address 6 [ 31.634295] usb 1-2: configuration #1 chosen from 1 choice [ 31.648402] input: BTC USB Multimedia Cordless Kit as /class/input/input17 [ 31.657215] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 31.670699] input: BTC USB Multimedia Cordless Kit as /class/input/input18 [ 31.682189] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 32.380567] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 32.380594] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 32.380599] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 32.892756] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:59:db:59 [ 32.892760] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 32.924801] eth0: no link during initialization. [ 32.928727] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.928730] bridge-eth0: enabling the bridge [ 32.928734] bridge-eth0: up [ 34.266185] eth0: link up. [ 34.270076] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.271522] input: Power Button (FF) as /class/input/input19 [ 34.284207] ACPI: Power Button (FF) [PWRF] [ 34.284251] input: Power Button (CM) as /class/input/input20 [ 34.294420] ACPI: Power Button (CM) [PWRB] [ 49.247535] eth0: no IPv6 routers present [ 373.235997] CIFS VFS: No response for cmd 50 mid 54293 [ 500.725653] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 500.725660] ata2.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 500.725661] res 40/00:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 500.725664] ata2.00: status: { DRDY } [ 500.725670] ata2: hard resetting link [ 501.333485] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 501.342713] ata2.00: configured for UDMA/133 [ 501.342721] ata2: EH complete [ 501.342866] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 501.342982] sd 1:0:0:0: [sda] Write Protect is off [ 501.342985] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 501.343181] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 507.331011] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 507.331019] ata2.00: cmd b0/d1:01:01:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 507.331021] res 40/00:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 507.331023] ata2.00: status: { DRDY } [ 507.331029] ata2: hard resetting link [ 507.938846] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 507.952183] ata2.00: configured for UDMA/133 [ 507.952191] ata2: EH complete [ 507.952423] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 507.952511] sd 1:0:0:0: [sda] Write Protect is off [ 507.952514] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 507.952750] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA