Re: sata_mv & pmp support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mark Lord wrote:
Mark Lord wrote:

Yeah, I'm happy now.  :)

It seems very rock solid, actually, at least on the one PM I have that works.
The Fed-Ex guy is due tomorrow with a fresh Marvell PM for me,
but I might send some stuff out for #upstream in the interim.

Still gotta reboot/retest with a 60x1 chipset first, though.
..

Both command-based and FIS-based switching seem to work just fine.
But there is a problem, maybe you could help with ?

I've just noticed that, if I unplug/replug the host-side SATA cable
on the Sil3726 PM, and *then* "insmod sata_mv", the PM is not found.

If I then simply do "rmmod sata_mv ; insmod sata_mv", then the PM is found.

This happens with the original hardreset code from Jeff,
as well as the updated sata_mv code that I've posted earlier.
So it is not anything I've broken (recently :) ).

Very strange.. I wonder if it also happens with the Marvell PM,
except I don't have one here to test with at the moment.

Ever heard of anything strange like that?

IIRC, ICH8 ahci + 4726 fails the initial reset sequence because the PMP comes up after the hardreset code times out, which triggers another EH iteration which works out fine. If the problem is caused by the PMP not responding fast enough, it should cause a hotplug event afterwards. Maybe there's a race condition where hotplug events can be lost?

--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux