Hi, I tried 2.6.25-rc7 and there are some changes. Bad news first. With AHCI in bios I get this: [ 0.363838] ------------[ cut here ]------------ [ 0.363838] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a() [ 0.363838] Modules linked in: [ 0.363838] Pid: 1, comm: swapper Not tainted 2.6.25-rc7 #3 [ 0.363838] [ 0.363838] Call Trace: [ 0.363838] [<ffffffff8022c545>] warn_on_slowpath+0x51/0x63 [ 0.363838] [<ffffffff80220061>] __ioremap+0x8/0x197 [ 0.363838] [<ffffffff8038e218>] pci_conf1_read+0xb2/0xbd [ 0.363841] [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c [ 0.363880] [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c [ 0.363920] [<ffffffff80346ca1>] devres_find+0x4b/0x65 [ 0.363959] [<ffffffff8036a405>] ahci_init_one+0x190/0xa3a [ 0.363998] [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209 [ 0.364038] [<ffffffff80283f98>] ifind+0x34/0x8d [ 0.364076] [<ffffffff802af636>] sysfs_find_dirent+0x1b/0x2f [ 0.364115] [<ffffffff802eb4c5>] ida_get_new_above+0xf0/0x180 [ 0.364154] [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209 [ 0.364194] [<ffffffff802b0458>] sysfs_create_link+0xb6/0x102 [ 0.364234] [<ffffffff802f83c4>] pci_device_probe+0x4c/0x72 [ 0.364273] [<ffffffff80344874>] driver_probe_device+0xb5/0x132 [ 0.364312] [<ffffffff80344a07>] __driver_attach+0x6f/0xaf [ 0.364350] [<ffffffff80344998>] __driver_attach+0x0/0xaf [ 0.364389] [<ffffffff80344998>] __driver_attach+0x0/0xaf [ 0.364429] [<ffffffff80343c82>] bus_for_each_dev+0x44/0x6f [ 0.364468] [<ffffffff803444a0>] bus_add_driver+0xae/0x1f6 [ 0.364507] [<ffffffff80344c36>] driver_register+0x59/0xce [ 0.364546] [<ffffffff802f8605>] __pci_register_driver+0x4a/0x7d [ 0.364587] [<ffffffff804dd6b8>] kernel_init+0x14f/0x2b9 [ 0.364626] [<ffffffff8020be98>] child_rip+0xa/0x12 [ 0.364670] [<ffffffff804dd569>] kernel_init+0x0/0x2b9 [ 0.364709] [<ffffffff8020be8e>] child_rip+0x0/0x12 [ 0.364746] [ 0.364783] ---[ end trace 1d94b6d2f6a54ae4 ]--- [ 1.370499] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf imp l SATA mode [ 1.370499] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 1.370499] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.370501] scsi0 : ahci [ 1.370509] scsi1 : ahci [ 1.370517] scsi2 : ahci [ 1.370526] scsi3 : ahci [ 1.370532] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 23 [ 1.370532] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 23 [ 1.370532] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 23 [ 1.370532] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 23 [ 1.801113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.801617] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.801617] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.802150] ata1.00: configured for UDMA/133 [ 2.434072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.447930] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.447930] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.449834] ata2.00: configured for UDMA/133 [ 2.767054] ata3: SATA link down (SStatus 0 SControl 300) [ 3.086918] ata4: SATA link down (SStatus 0 SControl 300) [ 3.290523] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ : 0 ANSI: 5 [ 3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290535] sd 0:0:0:0: [sda] Write Protect is off [ 3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290535] sd 0:0:0:0: [sda] Write Protect is off [ 3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 3.290535] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.122431] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.122593] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ : 0 ANSI: 5 [ 3.122721] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.122768] sd 1:0:0:0: [sdb] Write Protect is off [ 3.122806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.122820] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 3.122900] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.122946] sd 1:0:0:0: [sdb] Write Protect is off [ 3.122984] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.122998] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 3.123047] sdb: sdb1 sdb2 [ 3.148928] sd 1:0:0:0: [sdb] Attached SCSI disk with nomsi. Without nomsi drives are still not found. Evil or not, it looks scary ;) dmesg&config is attached. Now the good ones. With non-raid set in bios box boots cleanly without hang: [ 0.360492] Driver 'sd' needs updating - please use bus_type methods [ 0.360498] ahci 0000:00:0a.0: version 3.0 [ 0.360498] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.360498] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.363826] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.363826] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 1.363826] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.363828] scsi0 : ahci [ 1.363836] scsi1 : ahci [ 1.363844] scsi2 : ahci [ 1.363851] scsi3 : ahci [ 1.363857] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315 [ 1.363857] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315 [ 1.363857] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315 [ 1.363857] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315 [ 1.794371] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.794871] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.794871] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.795403] ata1.00: configured for UDMA/133 [ 2.427327] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.447811] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.447811] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.449717] ata2.00: configured for UDMA/133 [ 2.766980] ata3: SATA link down (SStatus 0 SControl 300) [ 3.086847] ata4: SATA link down (SStatus 0 SControl 300) [ 3.290513] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5 [ 3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290525] sd 0:0:0:0: [sda] Write Protect is off [ 3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290525] sd 0:0:0:0: [sda] Write Protect is off [ 3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290525] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.123110] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.123121] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.123131] sd 1:0:0:0: [sdb] Write Protect is off [ 3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.123131] sd 1:0:0:0: [sdb] Write Protect is off [ 3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.123131] sdb: sdb1 sdb2 [ 3.127056] sd 1:0:0:0: [sdb] Attached SCSI disk again, dmesg is attached. Glück Auf, Volker
[ 0.000000] Linux version 2.6.25-rc7 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #3 SMP Thu Mar 27 17:12:28 CET 2008 [ 0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 console=tty6 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-546193] TEXT DATA BSS [ 0.000000] early res: 3 [9fc00-a0bff] EBDA [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 [ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0 [ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0 [ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 848 pages reserved [ 0.000000] DMA zone: 3095 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32584 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030527 [ 0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 console=tty6 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000002] time.c: Detected 3013.889 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty6] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003333] Checking aperture... [ 0.003333] Node 0: aperture @ 8000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] No AGP bridge found [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ c000000 [ 0.003333] PM: Registered nosave memory: 000000000c000000 - 0000000010000000 [ 0.003333] Memory: 4047784k/4980736k available (1978k kernel code, 145104k reserved, 856k data, 192k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.003333] hpet clockevent registered [ 0.083330] Calibrating delay using timer specific routine.. 6034.73 BogoMIPS (lpj=10053970) [ 0.083419] Mount-cache hash table entries: 256 [ 0.083537] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.083577] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.083615] CPU: Physical Processor ID: 0 [ 0.083651] CPU: Processor Core ID: 0 [ 0.083700] ACPI: Core revision 20070126 [ 0.122295] Using local APIC timer interrupts. [ 0.123326] APIC timer calibration result 12557872 [ 0.123327] Detected 12.557 MHz APIC timer. [ 0.123430] Booting processor 1/2 APIC 0x1 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6030.95 BogoMIPS (lpj=10046334) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.216840] Brought up 2 CPUs [ 0.217286] net_namespace: 296 bytes [ 0.217402] NET: Registered protocol family 16 [ 0.217496] No dock devices found. [ 0.217559] ACPI: bus type pci registered [ 0.217638] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.217677] PCI: Not using MMCONFIG. [ 0.217713] PCI: Using configuration type 1 [ 0.220689] ACPI: EC: Look up EC in DSDT [ 0.224824] ACPI: Interpreter enabled [ 0.224861] ACPI: (supports S0 S1 S3 S4 S5) [ 0.225032] ACPI: Using IOAPIC for interrupt routing [ 0.225203] ACPI: Error attaching device data [ 0.225243] ACPI: Error attaching device data [ 0.225282] ACPI: Error attaching device data [ 0.225322] ACPI: Error attaching device data [ 0.230926] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.231439] PCI: Transparent bridge - 0000:00:08.0 [ 0.231690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.231832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.231946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.232008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.232072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.232136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.236396] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.236955] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.237309] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.237690] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.238070] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.238450] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.238804] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.239184] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.239538] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.239892] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 0.240284] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.240638] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.241019] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.241399] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.241753] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.242133] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.242487] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.242892] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.243273] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.243669] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.243997] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.244045] pnp: PnP ACPI init [ 0.244084] ACPI: bus type pnp registered [ 0.247188] pnp: PnP ACPI: found 13 devices [ 0.247225] ACPI: ACPI bus type pnp unregistered [ 0.247332] SCSI subsystem initialized [ 0.247405] libata version 3.00 loaded. [ 0.247444] usbcore: registered new interface driver usbfs [ 0.247495] usbcore: registered new interface driver hub [ 0.247551] usbcore: registered new device driver usb [ 0.247631] PCI: Using ACPI for IRQ routing [ 0.247668] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.266652] PCI-DMA: Disabling AGP. [ 0.266652] PCI-DMA: aperture base @ c000000 size 65536 KB [ 0.266652] PCI-DMA: using GART IOMMU. [ 0.266652] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.266652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.266652] hpet0: 3 32-bit timers, 25000000 Hz [ 0.266661] Switched to high resolution mode on CPU 0 [ 0.056683] Switched to high resolution mode on CPU 1 [ 0.280018] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.280018] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.280018] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.280018] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.280018] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.280018] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.280018] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.280018] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.280021] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 0.280060] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 0.280100] system 00:05: iomem range 0x0-0x0 could not be reserved [ 0.280140] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.280190] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.280238] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.280289] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.280332] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.280376] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.280415] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.280455] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.280499] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 0.280546] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved [ 0.281003] PCI: Bridge: 0000:00:08.0 [ 0.281041] IO window: d000-dfff [ 0.281078] MEM window: 0xf9f00000-0xf9ffffff [ 0.281116] PREFETCH window: disabled. [ 0.281155] PCI: Bridge: 0000:00:0b.0 [ 0.281191] IO window: c000-cfff [ 0.281228] MEM window: 0xf9e00000-0xf9efffff [ 0.281265] PREFETCH window: disabled. [ 0.281303] PCI: Bridge: 0000:00:0c.0 [ 0.281339] IO window: disabled. [ 0.281376] MEM window: disabled. [ 0.281413] PREFETCH window: disabled. [ 0.281450] PCI: Bridge: 0000:00:0d.0 [ 0.281487] IO window: e000-efff [ 0.281524] MEM window: 0xfa000000-0xfebfffff [ 0.281562] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.281602] PCI: Bridge: 0000:00:0e.0 [ 0.281638] IO window: disabled. [ 0.281675] MEM window: disabled. [ 0.281711] PREFETCH window: disabled. [ 0.281754] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.281763] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.281768] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.281773] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.281778] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.281785] NET: Registered protocol family 2 [ 0.316683] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.316683] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.316683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316683] TCP: Hash tables configured (established 262144 bind 65536) [ 0.316683] TCP reno registered [ 0.326992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.326992] io scheduler noop registered [ 0.326992] io scheduler cfq registered (default) [ 0.326992] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.326992] pci 0000:04:00.0: Boot video device [ 0.327000] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.327000] assign_interrupt_mode Found MSI capability [ 0.327000] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.327006] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.327006] assign_interrupt_mode Found MSI capability [ 0.327006] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.327012] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.327012] assign_interrupt_mode Found MSI capability [ 0.327012] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.327018] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.327018] assign_interrupt_mode Found MSI capability [ 0.327018] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.327056] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.327056] ACPI: Power Button (FF) [PWRF] [ 0.327062] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.327062] ACPI: Power Button (CM) [PWRB] [ 0.327094] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.327100] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.363802] Real Time Clock Driver v1.12ac [ 0.363806] hpet_resources: 0xfed00000 is busy [ 0.363813] Linux agpgart interface v0.103 [ 0.363832] Driver 'sd' needs updating - please use bus_type methods [ 0.363838] ahci 0000:00:0a.0: version 3.0 [ 0.363838] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.363838] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.363838] ------------[ cut here ]------------ [ 0.363838] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a() [ 0.363838] Modules linked in: [ 0.363838] Pid: 1, comm: swapper Not tainted 2.6.25-rc7 #3 [ 0.363838] [ 0.363838] Call Trace: [ 0.363838] [<ffffffff8022c545>] warn_on_slowpath+0x51/0x63 [ 0.363838] [<ffffffff80220061>] __ioremap+0x8/0x197 [ 0.363838] [<ffffffff8038e218>] pci_conf1_read+0xb2/0xbd [ 0.363841] [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c [ 0.363880] [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c [ 0.363920] [<ffffffff80346ca1>] devres_find+0x4b/0x65 [ 0.363959] [<ffffffff8036a405>] ahci_init_one+0x190/0xa3a [ 0.363998] [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209 [ 0.364038] [<ffffffff80283f98>] ifind+0x34/0x8d [ 0.364076] [<ffffffff802af636>] sysfs_find_dirent+0x1b/0x2f [ 0.364115] [<ffffffff802eb4c5>] ida_get_new_above+0xf0/0x180 [ 0.364154] [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209 [ 0.364194] [<ffffffff802b0458>] sysfs_create_link+0xb6/0x102 [ 0.364234] [<ffffffff802f83c4>] pci_device_probe+0x4c/0x72 [ 0.364273] [<ffffffff80344874>] driver_probe_device+0xb5/0x132 [ 0.364312] [<ffffffff80344a07>] __driver_attach+0x6f/0xaf [ 0.364350] [<ffffffff80344998>] __driver_attach+0x0/0xaf [ 0.364389] [<ffffffff80344998>] __driver_attach+0x0/0xaf [ 0.364429] [<ffffffff80343c82>] bus_for_each_dev+0x44/0x6f [ 0.364468] [<ffffffff803444a0>] bus_add_driver+0xae/0x1f6 [ 0.364507] [<ffffffff80344c36>] driver_register+0x59/0xce [ 0.364546] [<ffffffff802f8605>] __pci_register_driver+0x4a/0x7d [ 0.364587] [<ffffffff804dd6b8>] kernel_init+0x14f/0x2b9 [ 0.364626] [<ffffffff8020be98>] child_rip+0xa/0x12 [ 0.364670] [<ffffffff804dd569>] kernel_init+0x0/0x2b9 [ 0.364709] [<ffffffff8020be8e>] child_rip+0x0/0x12 [ 0.364746] [ 0.364783] ---[ end trace 1d94b6d2f6a54ae4 ]--- [ 1.370499] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.370499] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 1.370499] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.370501] scsi0 : ahci [ 1.370509] scsi1 : ahci [ 1.370517] scsi2 : ahci [ 1.370526] scsi3 : ahci [ 1.370532] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 23 [ 1.370532] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 23 [ 1.370532] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 23 [ 1.370532] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 23 [ 1.801113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.801617] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.801617] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.802150] ata1.00: configured for UDMA/133 [ 2.434072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.447930] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.447930] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.449834] ata2.00: configured for UDMA/133 [ 2.767054] ata3: SATA link down (SStatus 0 SControl 300) [ 3.086918] ata4: SATA link down (SStatus 0 SControl 300) [ 3.290523] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5 [ 3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290535] sd 0:0:0:0: [sda] Write Protect is off [ 3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290535] sd 0:0:0:0: [sda] Write Protect is off [ 3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290535] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.122431] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.122593] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 3.122721] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.122768] sd 1:0:0:0: [sdb] Write Protect is off [ 3.122806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.122820] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.122900] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.122946] sd 1:0:0:0: [sdb] Write Protect is off [ 3.122984] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.122998] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.123047] sdb: sdb1 sdb2 [ 3.148928] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.148943] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.149040] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.149040] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.179062] usbcore: registered new interface driver usbhid [ 3.179062] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.179062] TCP cubic registered [ 3.179062] NET: Registered protocol family 1 [ 3.179068] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 3.378698] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 3.378698] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 3.378698] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 3.378698] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 3.378698] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 3.378698] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 3.378698] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 3.378698] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 3.211155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.310804] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 3.310804] ReiserFS: sda3: using ordered data mode [ 3.323573] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 3.327318] ReiserFS: sda3: checking transaction log (sda3) [ 3.370161] ReiserFS: sda3: Using r5 hash to sort names [ 3.370161] VFS: Mounted root (reiserfs filesystem) readonly. [ 3.370161] Freeing unused kernel memory: 192k freed [ 4.060449] Clocksource tsc unstable (delta = -150866427 ns) [ 8.503418] ReiserFS: sda3: switching to journaled data mode [ 8.884405] r8169 Gigabit Ethernet driver 2.2LK loaded [ 8.884634] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 8.884639] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 8.884648] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.884657] r8169 0000:01:00.0: no MSI. Back to INTx. [ 8.887277] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 19 [ 8.934245] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 8.934250] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 8.934258] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 8.934260] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 8.934332] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 8.934354] ehci_hcd 0000:00:02.1: debug port 1 [ 8.934356] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 8.934363] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 8.946541] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.946618] usb usb1: configuration #1 chosen from 1 choice [ 8.946633] hub 1-0:1.0: USB hub found [ 8.946639] hub 1-0:1.0: 10 ports detected [ 9.057663] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.057663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.057663] usb usb1: Product: EHCI Host Controller [ 9.057663] usb usb1: Manufacturer: Linux 2.6.25-rc7 ehci_hcd [ 9.057663] usb usb1: SerialNumber: 0000:00:02.1 [ 9.355067] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 9.450447] usb 1-3: configuration #1 chosen from 1 choice [ 9.450649] hub 1-3:1.0: USB hub found [ 9.457951] hub 1-3:1.0: 4 ports detected [ 9.575226] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 [ 9.575228] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.575230] usb 1-3: Product: USB2.0 Hub [ 9.611453] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 9.774119] usb 1-3.1: new low speed USB device using ehci_hcd and address 3 [ 9.877429] usb 1-3.1: configuration #1 chosen from 1 choice [ 9.894606] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.0/input/input3 [ 10.307344] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 10.314064] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.1/input/input4 [ 10.390680] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 10.390712] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c518 [ 10.390714] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.390716] usb 1-3.1: Product: USB Receiver [ 10.390717] usb 1-3.1: Manufacturer: Logitech [ 10.434028] mice: PS/2 mouse device common for all mice [ 13.292848] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 13.292848] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 [ 13.294716] Audigy2 value: Special config. [ 15.801564] w83627ehf: Found W83627EHG chip at 0x290 [ 17.536775] r8169: eth0: link up [ 17.536781] r8169: eth0: link up [ 18.784515] NET: Registered protocol family 17
[ 0.000000] Linux version 2.6.25-rc7 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #3 SMP Thu Mar 27 17:12:28 CET 2008 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] end_pfn_map = 1245184 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-546193] TEXT DATA BSS [ 0.000000] early res: 3 [9fc00-a0bff] EBDA [ 0.000000] early res: 4 [8000-dfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ 0.000000] [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 [ 0.000000] [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0 [ 0.000000] [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0 [ 0.000000] [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0 [ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0 [ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0 [ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0 [ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 848 pages reserved [ 0.000000] DMA zone: 3095 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32584 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030527 [ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000001] Marking TSC unstable due to TSCs unsynchronized [ 0.000002] time.c: Detected 3013.892 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty6] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003333] Checking aperture... [ 0.003333] Node 0: aperture @ c000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] No AGP bridge found [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ c000000 [ 0.003333] PM: Registered nosave memory: 000000000c000000 - 0000000010000000 [ 0.003333] Memory: 4047784k/4980736k available (1978k kernel code, 145104k reserved, 856k data, 192k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.003333] hpet clockevent registered [ 0.083330] Calibrating delay using timer specific routine.. 6034.71 BogoMIPS (lpj=10053948) [ 0.083419] Mount-cache hash table entries: 256 [ 0.083538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.083577] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.083615] CPU: Physical Processor ID: 0 [ 0.083652] CPU: Processor Core ID: 0 [ 0.083700] ACPI: Core revision 20070126 [ 0.122294] Using local APIC timer interrupts. [ 0.123326] APIC timer calibration result 12557885 [ 0.123327] Detected 12.557 MHz APIC timer. [ 0.123430] Booting processor 1/2 APIC 0x1 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6030.96 BogoMIPS (lpj=10046343) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.216841] Brought up 2 CPUs [ 0.217286] net_namespace: 296 bytes [ 0.217401] NET: Registered protocol family 16 [ 0.217495] No dock devices found. [ 0.217558] ACPI: bus type pci registered [ 0.217637] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.217676] PCI: Not using MMCONFIG. [ 0.217712] PCI: Using configuration type 1 [ 0.220688] ACPI: EC: Look up EC in DSDT [ 0.224821] ACPI: Interpreter enabled [ 0.224858] ACPI: (supports S0 S1 S3 S4 S5) [ 0.225029] ACPI: Using IOAPIC for interrupt routing [ 0.225199] ACPI: Error attaching device data [ 0.225238] ACPI: Error attaching device data [ 0.225278] ACPI: Error attaching device data [ 0.225317] ACPI: Error attaching device data [ 0.233318] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.233318] PCI: Transparent bridge - 0000:00:08.0 [ 0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.236692] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.237049] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.237403] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.237782] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.238162] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.238541] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.238895] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.239274] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.239628] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.239991] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 0.240371] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.240724] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.241103] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.241483] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.241837] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.242217] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.242570] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.242975] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.243364] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.243745] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.244072] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.244120] pnp: PnP ACPI init [ 0.244159] ACPI: bus type pnp registered [ 0.247240] pnp: PnP ACPI: found 13 devices [ 0.247278] ACPI: ACPI bus type pnp unregistered [ 0.247384] SCSI subsystem initialized [ 0.247458] libata version 3.00 loaded. [ 0.247497] usbcore: registered new interface driver usbfs [ 0.247547] usbcore: registered new interface driver hub [ 0.247602] usbcore: registered new device driver usb [ 0.247683] PCI: Using ACPI for IRQ routing [ 0.247720] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.266663] PCI-DMA: Disabling AGP. [ 0.266663] PCI-DMA: aperture base @ c000000 size 65536 KB [ 0.266663] PCI-DMA: using GART IOMMU. [ 0.266663] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.266663] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.266663] hpet0: 3 32-bit timers, 25000000 Hz [ 0.266672] Switched to high resolution mode on CPU 0 [ 0.056669] Switched to high resolution mode on CPU 1 [ 0.280029] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.280029] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.280029] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.280029] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.280029] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.280029] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.280029] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.280029] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.280029] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 0.280029] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 0.280029] system 00:05: iomem range 0x0-0x0 could not be reserved [ 0.280032] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.280079] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.280127] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.280178] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.280221] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.280264] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.280303] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.280343] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.280388] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 0.280435] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved [ 0.280892] PCI: Bridge: 0000:00:08.0 [ 0.280929] IO window: d000-dfff [ 0.280966] MEM window: 0xf9f00000-0xf9ffffff [ 0.281004] PREFETCH window: disabled. [ 0.281043] PCI: Bridge: 0000:00:0b.0 [ 0.281079] IO window: c000-cfff [ 0.281116] MEM window: 0xf9e00000-0xf9efffff [ 0.281153] PREFETCH window: disabled. [ 0.281191] PCI: Bridge: 0000:00:0c.0 [ 0.281227] IO window: disabled. [ 0.281264] MEM window: disabled. [ 0.281300] PREFETCH window: disabled. [ 0.281338] PCI: Bridge: 0000:00:0d.0 [ 0.281374] IO window: e000-efff [ 0.281411] MEM window: 0xfa000000-0xfebfffff [ 0.281449] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.281488] PCI: Bridge: 0000:00:0e.0 [ 0.281525] IO window: disabled. [ 0.281561] MEM window: disabled. [ 0.281598] PREFETCH window: disabled. [ 0.281641] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.281650] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.281655] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.281660] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.281665] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.281671] NET: Registered protocol family 2 [ 0.316693] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.316693] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.316693] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316693] TCP: Hash tables configured (established 262144 bind 65536) [ 0.316693] TCP reno registered [ 0.326990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.326990] io scheduler noop registered [ 0.326990] io scheduler cfq registered (default) [ 0.326990] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.326990] pci 0000:04:00.0: Boot video device [ 0.326998] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.326998] assign_interrupt_mode Found MSI capability [ 0.326998] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.327005] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.327005] assign_interrupt_mode Found MSI capability [ 0.327005] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.327011] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.327011] assign_interrupt_mode Found MSI capability [ 0.327011] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.327017] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.327017] assign_interrupt_mode Found MSI capability [ 0.327017] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.327055] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.327055] ACPI: Power Button (FF) [PWRF] [ 0.327061] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.327061] ACPI: Power Button (CM) [PWRB] [ 0.327092] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.327099] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.360462] Real Time Clock Driver v1.12ac [ 0.360466] hpet_resources: 0xfed00000 is busy [ 0.360473] Linux agpgart interface v0.103 [ 0.360492] Driver 'sd' needs updating - please use bus_type methods [ 0.360498] ahci 0000:00:0a.0: version 3.0 [ 0.360498] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.360498] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.363826] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.363826] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio [ 1.363826] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.363828] scsi0 : ahci [ 1.363836] scsi1 : ahci [ 1.363844] scsi2 : ahci [ 1.363851] scsi3 : ahci [ 1.363857] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315 [ 1.363857] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315 [ 1.363857] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315 [ 1.363857] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315 [ 1.794371] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.794871] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 1.794871] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.795403] ata1.00: configured for UDMA/133 [ 2.427327] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.447811] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 2.447811] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.449717] ata2.00: configured for UDMA/133 [ 2.766980] ata3: SATA link down (SStatus 0 SControl 300) [ 3.086847] ata4: SATA link down (SStatus 0 SControl 300) [ 3.290513] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5 [ 3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290525] sd 0:0:0:0: [sda] Write Protect is off [ 3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.290525] sd 0:0:0:0: [sda] Write Protect is off [ 3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.290525] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.123110] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.123121] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.123131] sd 1:0:0:0: [sdb] Write Protect is off [ 3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 3.123131] sd 1:0:0:0: [sdb] Write Protect is off [ 3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.123131] sdb: sdb1 sdb2 [ 3.127056] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.127075] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.127908] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.127950] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.170517] usbcore: registered new interface driver usbhid [ 3.170517] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.170517] TCP cubic registered [ 3.170517] NET: Registered protocol family 1 [ 3.170521] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 3.371502] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 3.371502] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 3.371502] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 3.371502] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 3.371502] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 3.371502] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 3.371502] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 3.371502] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 3.200878] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.299367] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 3.299367] ReiserFS: sda3: using ordered data mode [ 3.310974] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 3.310974] ReiserFS: sda3: checking transaction log (sda3) [ 3.356310] ReiserFS: sda3: Using r5 hash to sort names [ 3.356310] VFS: Mounted root (reiserfs filesystem) readonly. [ 3.356310] Freeing unused kernel memory: 192k freed [ 4.194202] Clocksource tsc unstable (delta = -248646934 ns) [ 8.519617] ReiserFS: sda3: switching to journaled data mode [ 8.855926] r8169 Gigabit Ethernet driver 2.2LK loaded [ 8.855941] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 8.855946] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 8.855955] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.856327] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314 [ 8.901477] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 8.901483] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 8.901490] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 8.901492] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 8.901566] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 8.901588] ehci_hcd 0000:00:02.1: debug port 1 [ 8.901591] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 8.901598] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 8.914115] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.914194] usb usb1: configuration #1 chosen from 1 choice [ 8.914210] hub 1-0:1.0: USB hub found [ 8.914216] hub 1-0:1.0: 10 ports detected [ 9.024962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.024962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.024962] usb usb1: Product: EHCI Host Controller [ 9.024962] usb usb1: Manufacturer: Linux 2.6.25-rc7 ehci_hcd [ 9.024962] usb usb1: SerialNumber: 0000:00:02.1 [ 9.310790] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 9.412640] usb 1-3: configuration #1 chosen from 1 choice [ 9.412928] hub 1-3:1.0: USB hub found [ 9.413043] hub 1-3:1.0: 4 ports detected [ 9.532594] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 [ 9.532596] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.532598] usb 1-3: Product: USB2.0 Hub [ 9.578589] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 9.737370] usb 1-3.1: new low speed USB device using ehci_hcd and address 3 [ 9.830710] usb 1-3.1: configuration #1 chosen from 1 choice [ 9.847857] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.0/input/input3 [ 10.250586] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 10.257338] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.1/input/input4 [ 10.329771] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 10.329805] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c518 [ 10.329807] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.329808] usb 1-3.1: Product: USB Receiver [ 10.329810] usb 1-3.1: Manufacturer: Logitech [ 10.413530] mice: PS/2 mouse device common for all mice [ 13.678751] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 13.678757] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 [ 13.682071] Audigy2 value: Special config. [ 17.567723] w83627ehf: Found W83627EHG chip at 0x290 [ 18.825463] r8169: eth0: link up [ 18.866514] r8169: eth0: link up [ 20.054043] NET: Registered protocol family 17
# # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc7 # Thu Mar 27 17:08:31 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_64_SMP=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_CLASSIC_RCU=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set CONFIG_MK8=y # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y # CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # # CONFIG_X86_ACPI_CPUFREQ is not set CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # CONFIG_CPU_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=m CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m # # Bluetooth device drivers # # CONFIG_BT_HCIUSB is not set # CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=16 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_R8169_NAPI is not set CONFIG_R8169_VLAN=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set CONFIG_FIX_EARLYCON_MEM=y # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m # CONFIG_I2C_AMD756_S4882 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_NFORCE2=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set CONFIG_SENSORS_K8TEMP=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set CONFIG_SENSORS_MAX6650=m # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_CX23885 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_VIDEO_PVRUSB2 is not set CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_ALSA=m # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_W9968CF is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_RADIO_ADAPTERS is not set CONFIG_DVB_CORE=m CONFIG_DVB_CORE_ATTACH=y CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # # CONFIG_TTPCI_EEPROM is not set # CONFIG_DVB_AV7110 is not set # CONFIG_DVB_BUDGET_CORE is not set # # Supported USB Adapters # # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set # # Supported FlexCopII (B2C2) Adapters # # CONFIG_DVB_B2C2_FLEXCOP is not set # # Supported BT878 Adapters # # # Supported Pluto2 Adapters # # CONFIG_DVB_PLUTO2 is not set # # Supported DVB Frontends # # # Customise DVB Frontends # # CONFIG_DVB_FE_CUSTOMISE is not set # # DVB-S (satellite) frontends # # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set # CONFIG_DVB_TDA10086 is not set # # DVB-T (terrestrial) frontends # # CONFIG_DVB_SP8870 is not set # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m # CONFIG_DVB_DIB3000MB is not set # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set # # DVB-C (cable) frontends # # CONFIG_DVB_VES1820 is not set # CONFIG_DVB_TDA10021 is not set # CONFIG_DVB_TDA10023 is not set # CONFIG_DVB_STV0297 is not set # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # CONFIG_DVB_NXT200X is not set # CONFIG_DVB_OR51211 is not set # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set # # Tuners/PLL support # # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set CONFIG_DVB_TDA827X=m CONFIG_DVB_TDA18271=m # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set CONFIG_DVB_TUNER_XC5000=m # # Miscellaneous devices # # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6421 is not set # CONFIG_DVB_TUA6100 is not set CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_TUNER_CUSTOMIZE=y CONFIG_TUNER_XC2028=m CONFIG_TUNER_MT20XX=m CONFIG_TUNER_TDA8290=m CONFIG_TUNER_TEA5761=m CONFIG_TUNER_TEA5767=m CONFIG_TUNER_SIMPLE=m CONFIG_TUNER_TDA9887=m CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_PCM_OSS_PLUGINS is not set CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 # # USB devices # CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # ALSA SoC audio for Freescale SOCs # # # Open Sound System # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=850 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-15" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_LATENCYTOP is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_X86_MPPARSE=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m # CONFIG_CRYPTO_SEQIV is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m # CONFIG_KVM_INTEL is not set CONFIG_KVM_AMD=m # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y
