Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Freitag, 30. Mai 2008, Tejun Heo wrote:
> Hello,
>
> Hemmann, Volker Armin wrote:
> > -AHCI+nomsi: boots fine. Works fine. But: I still can not enable ncq
> > -AHCI+msi: the usual. No harddisks found, waiting for the timeouts, then
> > kernel panic because of missing root.
> >
> > -NON-RAID/IDE+msi: works fine. No delays. No NCQ (not surprising since
> > mobos handbook says that AHCI mode is required).
> > -NON-RAID/IDE+nomsi: see above.
>
> So, sans NCQ, the only remaining issue is MSI, right?  Peer Chen, please
> lemme know which controllers are affected by this MSI problem and where
> the problem lies.

this is correct.

> The controller is not reporting NCQ capability in its cap register
> (flags: line contains ncq if the controller is), so NCQ is not enabled.

ah, I thought all AHCI chipsets support NCQ (and the board's handbook lists it 
as feature) thanks for the explanation.

Glück Auf,
Volker
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux