sata_sil24 performance weirdness

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I forward-ported Tejun's PMP patches to libata#upstream (my first attempt at it
a few weeks ago failed, but this round works fine, tested at each branch
stage), and in using them, I have noticed a bit of oddity.

While dmesg claims that 3.0Gbps was negotiated, the combined performance of the
5 disks never exceeds 1.5Gbps, no matter how I combine them. Is something in
the driver overriding the 3Gbps speed bits somewhere?

My SATA enclosure the 5-disk Fusion 500P from Sonnet (PMP 0x1095:0x3726)

Controller:
Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)

Drives:
5x Seagate ST3320620AS (7200.10 320Gbyte)

ata9: SATA max UDMA/133 cmd 0xFFFFC20000070000 ctl 0x0 bmdma 0x0 irq 18
ata10: SATA max UDMA/133 cmd 0xFFFFC20000072000 ctl 0x0 bmdma 0x0 irq 18
scsi10 : sata_sil24
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 5 ports, feat 0x9/0x9
ata9.00: hard resetting port
ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.01: hard resetting port
ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.02: hard resetting port
ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.03: hard resetting port
ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.04: hard resetting port
ata9.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
ata9.01: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
ata9.01: configured for UDMA/133
ata9.02: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
ata9.02: configured for UDMA/133
ata9.03: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
ata9.03: configured for UDMA/133
ata9.04: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
ata9.04: configured for UDMA/133
ata9: EH complete
scsi11 : sata_sil24
ata10: SATA link down (SStatus 0 SControl 300)
scsi 10:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
SCSI device sdi: 625142448 512-byte hdwr sectors (320073 MB)
sdi: Write Protect is off
sdi: Mode Sense: 00 3a 00 00
(rest of the disks sdi-> sdm all brought up in an identical fashion here).

-- 
Robin Hugh Johnson
Gentoo Linux Developer
E-Mail     : robbat2@xxxxxxxxxx
GnuPG FP   : 11AC BA4F 4778 E3F6 E4ED  F38E B27B 944E 3488 4E85

Attachment: pgphtXMV9CJ9v.pgp
Description: PGP signature


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux