[PATCH] sata_mv HighPoint 2310 support (88SX7042)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

With the following patch, my HighPoint 2310 with a Marvell 88SX7042 on
it seems to work OK.

The controller only has 4 ports, with MV_FLAG_DUAL_HC it seems to init 8
ports and fails miserably at probe time. There are no other devices mapped
to that chip, maybe it was just incorrectly specified in the first place?


Signed-off-by: Olof Johansson <olof@xxxxxxxxx>

Index: linux-2.6/drivers/ata/sata_mv.c
===================================================================
--- linux-2.6.orig/drivers/ata/sata_mv.c
+++ linux-2.6/drivers/ata/sata_mv.c
@@ -523,8 +523,7 @@ static const struct ata_port_info mv_por
 	},
 	{  /* chip_7042 */
 		.sht		= &mv_sht,
-		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
-				   MV_FLAG_DUAL_HC),
+		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv_iie_ops,
@@ -545,6 +544,8 @@ static const struct pci_device_id mv_pci
 
 	{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
 
+	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },
+
 	{ }			/* terminate list */
 };
 
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux