Before hardreset, ahci initialized stat part of received FIS area to 0xff to wait for the first D2H Reg FIS which would change the value to device ready state. This used to work but now libata considers status value of 0xff as device not present making this wait prone to failure. This patch makes ahci use 0x80 for the wait stat value instead of 0xff to fix the above problem. Signed-off-by: Tejun Heo <htejun@xxxxxxxxx> drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Index: work/drivers/ata/ahci.c =================================================================== --- work.orig/drivers/ata/ahci.c +++ work/drivers/ata/ahci.c @@ -915,7 +915,7 @@ static int ahci_hardreset(struct ata_por /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(ap->device, &tf); - tf.command = 0xff; + tf.command = 0x80; ata_tf_to_fis(&tf, d2h_fis, 0); rc = sata_std_hardreset(ap, class); - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
