Hello again. :-)
Bartlomiej Zolnierkiewicz wrote:
[PATCH] ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void
Below are my nits on the patch itself, and the code it changes.
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -121,7 +121,7 @@ static int atiixp_ide_dma_host_on(ide_dr
return __ide_dma_host_on(drive);
}
-static int atiixp_ide_dma_host_off(ide_drive_t *drive)
+static void atiixp_ide_dma_host_off(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
[...]
@@ -306,7 +306,7 @@ static void __devinit init_hwif_atiixp(i
hwif->udma_four = 0;
hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
- hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
+ hwif->dma_host_off = &atiixp_ide_dma_host_off;
hwif->ide_dma_check = &atiixp_dma_check;
if (!noautodma)
hwif->autodma = 1;
Would seem logical to get rid of ide_ in the function's name also...
Index: b/drivers/ide/pci/sgiioc4.c
===================================================================
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -282,12 +282,11 @@ sgiioc4_ide_dma_on(ide_drive_t * drive)
return HWIF(drive)->ide_dma_host_on(drive);
}
-static int
-sgiioc4_ide_dma_off_quietly(ide_drive_t * drive)
+static void sgiioc4_ide_dma_off_quietly(ide_drive_t *drive)
{
drive->using_dma = 0;
- return HWIF(drive)->ide_dma_host_off(drive);
+ drive->hwif->dma_host_off(drive);
}
static int sgiioc4_ide_dma_check(ide_drive_t *drive)
@@ -317,12 +316,9 @@ sgiioc4_ide_dma_host_on(ide_drive_t * dr
return 1;
}
-static int
-sgiioc4_ide_dma_host_off(ide_drive_t * drive)
+static void sgiioc4_ide_dma_host_off(ide_drive_t * drive)
{
sgiioc4_clearirq(drive);
-
- return 0;
}
static int
@@ -612,10 +608,10 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->ide_dma_end = &sgiioc4_ide_dma_end;
hwif->ide_dma_check = &sgiioc4_ide_dma_check;
hwif->ide_dma_on = &sgiioc4_ide_dma_on;
- hwif->ide_dma_off_quietly = &sgiioc4_ide_dma_off_quietly;
+ hwif->dma_off_quietly = &sgiioc4_ide_dma_off_quietly;
hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
hwif->ide_dma_host_on = &sgiioc4_ide_dma_host_on;
- hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
+ hwif->dma_host_off = &sgiioc4_ide_dma_host_off;
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
The same here...
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -261,26 +261,24 @@ static int sl82c105_ide_dma_on (ide_driv
if (config_for_dma(drive)) {
config_for_pio(drive, 4, 0, 0);
Ugh, this forces PIO4 on fallback... and dma_on() doesn't select any modes
in any other driver but this one. :-/
- return HWIF(drive)->ide_dma_off_quietly(drive);
+ drive->hwif->dma_off_quietly(drive);
+ return 0;
}
printk(KERN_INFO "%s: DMA enabled\n", drive->name);
return __ide_dma_on(drive);
}
-static int sl82c105_ide_dma_off_quietly (ide_drive_t *drive)
+static void sl82c105_ide_dma_off_quietly(ide_drive_t *drive)
Also worth renaming...
{
u8 speed = XFER_PIO_0;
- int rc;
-
+
DBG(("sl82c105_ide_dma_off_quietly(drive:%s)\n", drive->name));
- rc = __ide_dma_off_quietly(drive);
+ ide_dma_off_quietly(drive);
if (drive->pio_speed)
Should always be non-zero since explicitly initialized.
speed = drive->pio_speed - XFER_PIO_0;
config_for_pio(drive, speed, 0, 1);
drive->current_speed = drive->pio_speed;
dma_off() shouldn't be changing current_speed IMHO.
-
- return rc;
}
The patch to fix those two functions is also cooking...
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
