Hi all.
Some time ago, I reported bug# 7170, as my ICH6 controller failed to
detect my disks after kernel upgrade.
I tested the 2.6.20-rc1 kernel yesterday, and now the controller reports:
[ 21.506369] ICH6: IDE controller at PCI slot 0000:00:1f.1
[ 21.506420] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 18
[ 21.506518] ICH6: chipset revision 3
[ 21.506565] ICH6: not 100% native mode: will probe irqs later
[ 21.506622] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
[ 22.177871] hda: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive
[ 22.789485] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 23.302937] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 23.303232] Uniform CD-ROM driver Revision: 3.20
[ 23.305545] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 23.305787] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 19
[ 23.305927] ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB082 bmdma
0xA880 irq 19
[ 23.306001] ata2: SATA max UDMA/133 cmd 0xB000 ctl 0xAC02 bmdma
0xA888 irq 19
[ 23.306056] scsi0 : ata_piix
[ 23.466877] ATA: abnormal status 0xD0 on port 0xB407
[ 23.466932] scsi1 : ata_piix
[ 23.627759] ATA: abnormal status 0x7F on port 0xB007
[...]
[ 23.990751] VFS: Cannot open root device "sda3" or unknown-block(0,0)
[ 23.990798] Please append a correct "root=" boot option
[ 23.990848] Kernel panic - not syncing: VFS: Unable to mount root fs
on unknown-block(0,0)
The disk is attatched to ata1, ata2 is not connected.
Is there something wrong here, or has the disk "just" been renamed ???
Regards
Joakim Crafack
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
