If you are using the noraid option then after a suspend/resume sequence
we need to reset the card back out of raid mode again.
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --exclude-from /usr/src/exclude --new-file --recursive linux.vanilla-2.6.19-rc6-mm1/drivers/ata/pata_it821x.c linux-2.6.19-rc6-mm1/drivers/ata/pata_it821x.c
--- linux.vanilla-2.6.19-rc6-mm1/drivers/ata/pata_it821x.c 2006-11-24 13:58:05.000000000 +0000
+++ linux-2.6.19-rc6-mm1/drivers/ata/pata_it821x.c 2006-11-24 14:23:48.000000000 +0000
@@ -80,7 +80,7 @@
#define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
struct it821x_dev
{
@@ -676,6 +676,8 @@
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations it821x_smart_port_ops = {
@@ -808,6 +810,14 @@
return ata_pci_init_one(pdev, port_info, 2);
}
+static int it821x_reinit_one(struct pci_dev *pdev)
+{
+ /* Resume - turn raid back off if need be */
+ if (it8212_noraid)
+ it821x_disable_raid(pdev);
+ return ata_pci_device_resume(pdev);
+}
+
static const struct pci_device_id it821x[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
@@ -819,7 +829,9 @@
.name = DRV_NAME,
.id_table = it821x,
.probe = it821x_init_one,
- .remove = ata_pci_remove_one
+ .remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = it821x_reinit_one,
};
static int __init it821x_init(void)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
