Re: [PATCH v2] libata: Simulate REPORT LUNS for ATAPI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2006-12-04 at 15:32 -0800, Darrick J. Wong wrote:
> The Quantum GoVault SATAPI removable disk device returns ATA_ERR in
> response to a REPORT LUNS packet.  If this happens to an ATAPI device
> that is attached to a SAS controller (this is the case with sas_ata),
> the device does not load because SCSI won't touch a "SCSI device"
> that won't report its LUNs.  Since most ATAPI devices don't support
> multiple LUNs anyway, we might as well fake a response like we do for
> ATA devices.

Actually, there may be a standards conflict here.  SPC says that all
devices reporting compliance with this standard (as the inquiry data for
this device claims) shall support REPORT LUNS.  On the other hand, MMC
doesn't list REPORT LUNS in its table of mandatory commands.

I'm starting to think that even if they report a SCSI compliance level
of 3 or greater, we still shouldn't send REPORT LUNS to devices that
return MMC type unless we have a white list override.

James


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux