Re: Problem booting linux 2.6.19-rc5, 2.6.19-rc5-git6, 2.6.19-rc5-mm2 with md raid 1 over lvm root

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo wrote:
Nicolas Mailhot wrote:
The failing kernels (I tried -rc5, -rc5-git6, -rc5-mm2 only print :

%<----
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
%<-----

(I didn't bother copying the rest of the failing kernel dmesg, as sata
initialisation fills the first half of the screen, then dm is initialised,
then you only get the logical consequences of failing to detect the /
volume. The sata part seems fine – it prints the name of the hard drives
we want to use)

I'm attaching the dmesg for the working distro kernel (yes I know not 100%
distro kernel, but very close to one), distro config , and the config I
used in my test. If anyone could help me to figure what's wrong I'd be
grateful.

Say 'y' not 'm' to SCSI disk support.

That will probably work, but just building a new initrd is probably a lot easier. Although I thought the SCSI modules were included if built and installed if present.

--
bill davidsen <davidsen@xxxxxxx>
 CTO TMR Associates, Inc
 Doing interesting things with small computers since 1979


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux