Hi all, I get an oops during initialisation of the pata_pdc2027x module on a POWER 285 machine. This is on a very recent Linus kernel tree (ff51a98799931256b555446b2f5675db08de6229) with Paulus' powerpc tree (that has now been merged). The oops looks like this: ---------------------------------------------------------------------------- Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...pata_pdc2027x 0001:cc:01.0: PLL input clock 32721 kHz ata1: PATA max UDMA/133 cmd 0xD0000800801457C0 ctl 0xD000080080145FDA bmdma 0xD000080080145000 irq 324 ata2: PATA max UDMA/133 cmd 0xD0000800801455C0 ctl 0xD000080080145DDA bmdma 0xD000080080145008 irq 324 scsi1 : pata_pdc2027x ata1.00: ATAPI, max UDMA/66 Unable to handle kernel paging request for data at address 0xc0000001007e8d80 Faulting instruction address: 0xd00000000007b660 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=128 NUMA Modules linked in: pata_pdc2027x dm_mirror dm_snapshot ipr libata NIP: D00000000007B660 LR: D00000000007B628 CTR: 0000000000000000 REGS: c0000000f4e3b5a0 TRAP: 0300 Not tainted (2.6.19comb) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24000080 XER: 20000009 DAR: C0000001007E8D80, DSISR: 0000000040010000 TASK = c000000007001040[3393] 'scsi_eh_1' THREAD: c0000000f4e38000 CPU: 2 GPR00: 0000000100000000 C0000000F4E3B820 D0000000000A95C0 C00000000FA946E8 GPR04: C0000000F4E3B960 0000000000000000 0000000000000003 C0000000F4E3B890 GPR08: 0000000000000001 C0000000007E8D80 D000080080145110 C000000000033A34 GPR12: 0000000000000000 C00000000056FF80 0000000000000000 C0000000004751C8 GPR16: 4000000001C00000 C000000000473B90 0000000000000000 000000000035D800 GPR20: 000000000213AF30 C00000000053AF30 C0000000F4E3BB10 0000000000000001 GPR24: 0000000000000002 0000000000000000 C0000000F4E3B960 C00000000FA946E8 GPR28: 0000000000000003 4000000000000000 D0000000000A7980 0000000000000000 NIP [D00000000007B660] .ata_exec_internal+0x8c/0xf8 [libata] LR [D00000000007B628] .ata_exec_internal+0x54/0xf8 [libata] Call Trace: [C0000000F4E3B820] [D0000000000A7980] .ipr_store_update_fw+0x100/0x6f0 [ipr] (unreliable) [C0000000F4E3B8F0] [D00000000007C15C] .ata_set_mode+0x4dc/0x6d0 [libata] [C0000000F4E3B9D0] [D0000000000860E0] .ata_do_eh+0x1538/0x1930 [libata] [C0000000F4E3BC20] [D000000000083774] .ata_bmdma_drive_eh+0x1f8/0x2e8 [libata] [C0000000F4E3BCD0] [D0000000000C17B4] .pdc2027x_error_handler+0x28/0x40 [pata_pdc2027x] [C0000000F4E3BD50] [D000000000086DC0] .ata_scsi_error+0x32c/0x660 [libata] [C0000000F4E3BE00] [C000000000312F7C] .scsi_error_handler+0xc8/0x80c [C0000000F4E3BEE0] [C00000000006A0F4] .kthread+0x124/0x174 [C0000000F4E3BF90] [C000000000024D68] .kernel_thread+0x4c/0x68 Instruction dump: 57ac053e e93e8020 7f63db78 7f44d378 780007c6 7f25cb78 7f86e378 38e10070 7fbd0214 39000001 7ba0f860 78001f24 <7d69002a> 7ba0a302 7bbd4602 39200000 done. ---------------------------------------------------------------------------- (The reference to ipr_store_update_fw is certainly not real) The config, lspci and full boot dmesg output are available at http://ozlabs.org/~sfr/{config,lspci,dmesg} This machine has a only cdrom drive attached to the pdc controller. -- Cheers, Stephen Rothwell sfr@xxxxxxxxxxxxxxxx http://www.canb.auug.org.au/~sfr/
Attachment:
pgpsZZLsQTgBr.pgp
Description: PGP signature
