I'm not sure if this will make it to the list or be filtered out (I'm not a list member), but I am having what looks like a very similar problem to Mark Hatle with NVRAID on 2.6.18 (fc6). My machine is working for a number of hours and then has some kind of disk problem (so far, it has been mostly when I leave in the evening). My log file is below. Please cc any responses to me at jcohen@xxxxxxxxx Thanks! Jon Nov 8 16:04:27 foo syslogd 1.4.1: restart. Nov 8 16:04:27 foo kernel: klogd 1.4.1, log source = /proc/kmsg started. Nov 8 16:04:27 foo kernel: Linux version 2.6.18-1.2798.fc6PAE (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:22 EDT 2006 Nov 8 16:04:27 foo kernel: BIOS-provided physical RAM map: Nov 8 16:04:27 foo kernel: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) Nov 8 16:04:27 foo kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Nov 8 16:04:27 foo kernel: BIOS-e820: 0000000000100000 - 000000009fdecc00 (usable) Nov 8 16:04:27 foo kernel: BIOS-e820: 000000009fdecc00 - 000000009fdeec00 (ACPI NVS) Nov 8 16:04:27 foo kernel: BIOS-e820: 000000009fdeec00 - 000000009fdf0c00 (ACPI data) Nov 8 16:04:27 foo kernel: BIOS-e820: 000000009fdf0c00 - 00000000a0000000 (reserved) Nov 8 16:04:27 foo kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Nov 8 16:04:27 foo kernel: BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) Nov 8 16:04:27 foo kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) Nov 8 16:04:27 foo kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Nov 8 16:04:27 foo kernel: BIOS-e820: 0000000100000000 - 0000000160000000 (usable) Nov 8 16:04:27 foo kernel: 4736MB HIGHMEM available. Nov 8 16:04:27 foo kernel: 896MB LOWMEM available. Nov 8 16:04:27 foo kernel: found SMP MP-table at 000fe710 Nov 8 16:04:27 foo kernel: NX (Execute Disable) protection: active Nov 8 16:04:27 foo kernel: DMI 2.3 present. Nov 8 16:04:27 foo kernel: Using APIC driver default Nov 8 16:04:27 foo kernel: ACPI: PM-Timer IO Port: 0x4008 Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Nov 8 16:04:27 foo kernel: Processor #0 15:6 APIC version 20 Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Nov 8 16:04:27 foo kernel: Processor #1 15:6 APIC version 20 Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) Nov 8 16:04:27 foo kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) Nov 8 16:04:27 foo kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) Nov 8 16:04:27 foo kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) Nov 8 16:04:27 foo kernel: IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 Nov 8 16:04:27 foo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 8 16:04:27 foo kernel: ACPI: BIOS IRQ0 pin2 override ignored. Nov 8 16:04:27 foo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Nov 8 16:04:27 foo kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Nov 8 16:04:27 foo kernel: Using ACPI (MADT) for SMP configuration information Nov 8 16:04:27 foo kernel: Allocating PCI resources starting at a4000000 (gap: a0000000:40000000) Nov 8 16:04:27 foo kernel: Detected 2993.312 MHz processor. Nov 8 16:04:27 foo kernel: Built 1 zonelists. Total pages: 1441792 Nov 8 16:04:27 foo kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Nov 8 16:04:27 foo kernel: Enabling fast FPU save and restore... done. Nov 8 16:04:27 foo kernel: Enabling unmasked SIMD FPU exception support... done. Nov 8 16:04:27 foo kernel: Initializing CPU#0 Nov 8 16:04:27 foo kernel: CPU 0 irqstacks, hard=c07ad000 soft=c078d000 Nov 8 16:04:27 foo kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Nov 8 16:04:27 foo kernel: Console: colour VGA+ 80x25 Nov 8 16:04:27 foo kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Nov 8 16:04:27 foo kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Nov 8 16:04:27 foo kernel: Memory: 4138148k/5767168k available (2135k kernel code, 52676k reserved, 862k data, 244k init, 3274672k highmem) Nov 8 16:04:27 foo kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Nov 8 16:04:27 foo kernel: Calibrating delay using timer specific routine.. 5992.02 BogoMIPS (lpj=11984051) Nov 8 16:04:27 foo kernel: Security Framework v1.0.0 initialized Nov 8 16:04:27 foo kernel: SELinux: Initializing. Nov 8 16:04:27 foo kernel: SELinux: Starting in permissive mode Nov 8 16:04:27 foo kernel: selinux_register_security: Registering secondary module capability Nov 8 16:04:27 foo kernel: Capability LSM initialized as secondary Nov 8 16:04:27 foo kernel: Mount-cache hash table entries: 512 Nov 8 16:04:27 foo kernel: monitor/mwait feature present. Nov 8 16:04:27 foo kernel: using mwait in idle threads. Nov 8 16:04:27 foo kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K Nov 8 16:04:27 foo kernel: CPU: L2 cache: 2048K Nov 8 16:04:27 foo kernel: CPU: Physical Processor ID: 0 Nov 8 16:04:27 foo kernel: CPU: Processor Core ID: 0 Nov 8 16:04:27 foo kernel: Intel machine check architecture supported. Nov 8 16:04:27 foo kernel: Intel machine check reporting enabled on CPU#0. Nov 8 16:04:27 foo kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (24) available Nov 8 16:04:27 foo kernel: CPU0: Thermal monitoring enabled Nov 8 16:04:27 foo kernel: Checking 'hlt' instruction... OK. Nov 8 16:04:27 foo kernel: SMP alternatives: switching to UP code Nov 8 16:04:27 foo kernel: ACPI: Core revision 20060707 Nov 8 16:04:27 foo kernel: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 Nov 8 16:04:27 foo kernel: SMP alternatives: switching to SMP code Nov 8 16:04:27 foo kernel: Booting processor 1/1 eip 3000 Nov 8 16:04:27 foo kernel: CPU 1 irqstacks, hard=c07ae000 soft=c078e000 Nov 8 16:04:27 foo kernel: Initializing CPU#1 Nov 8 16:04:27 foo kernel: Calibrating delay using timer specific routine.. 5986.38 BogoMIPS (lpj=11972768) Nov 8 16:04:27 foo kernel: monitor/mwait feature present. Nov 8 16:04:27 foo kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K Nov 8 16:04:27 foo kernel: CPU: L2 cache: 2048K Nov 8 16:04:27 foo kernel: CPU: Physical Processor ID: 0 Nov 8 16:04:27 foo kernel: CPU: Processor Core ID: 1 Nov 8 16:04:27 foo kernel: Intel machine check architecture supported. Nov 8 16:04:27 foo kernel: Intel machine check reporting enabled on CPU#1. Nov 8 16:04:27 foo kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (24) available Nov 8 16:04:27 foo kernel: CPU1: Thermal monitoring enabled Nov 8 16:04:27 foo kernel: CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 Nov 8 16:04:27 foo kernel: Total of 2 processors activated (11978.40 BogoMIPS). Nov 8 16:04:27 foo kernel: ENABLING IO-APIC IRQs Nov 8 16:04:27 foo kernel: ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Nov 8 16:04:27 foo kernel: checking TSC synchronization across 2 CPUs: passed. Nov 8 16:04:27 foo kernel: Brought up 2 CPUs Nov 8 16:04:27 foo kernel: migration_cost=1257 Nov 8 16:04:27 foo kernel: checking if image is initramfs... it is Nov 8 16:04:27 foo kernel: Freeing initrd memory: 2278k freed Nov 8 16:04:27 foo kernel: NET: Registered protocol family 16 Nov 8 16:04:27 foo kernel: ACPI: bus type pci registered Nov 8 16:04:27 foo kernel: PCI: Using MMCONFIG Nov 8 16:04:27 foo kernel: Setting up standard PCI resources Nov 8 16:04:27 foo kernel: ACPI: Interpreter enabled Nov 8 16:04:27 foo kernel: ACPI: Using IOAPIC for interrupt routing Nov 8 16:04:27 foo kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Nov 8 16:04:27 foo kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 9 10 *11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *9 10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 9 *10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 9 10 *11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 *9 10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 9 *10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK12] (IRQs 3 4 5 6 7 *9 10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK13] (IRQs 3 4 5 6 7 9 *10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK14] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK16] (IRQs 3 4 5 6 7 9 10 *11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK17] (IRQs 3 4 5 6 7 9 10 *11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK20] (IRQs 3 4 5 6 7 9 *10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK23] (IRQs 3 4 5 6 7 *9 10 11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK26] (IRQs 3 4 5 6 7 9 10 11 12 15) *14 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [LK27] (IRQs 3 4 5 6 7 9 10 *11 12 15) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP00] (IRQs 16) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP01] (IRQs 17) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP02] (IRQs 18) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP03] (IRQs 19) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP04] (IRQs 16) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP05] (IRQs 17) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP06] (IRQs 18) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP07] (IRQs 19) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP12] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP13] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP14] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP16] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP17] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP20] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP23] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP26] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP27] (IRQs 20 21 22 23) *0, disabled. Nov 8 16:04:27 foo kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Nov 8 16:04:27 foo kernel: pnp: PnP ACPI init Nov 8 16:04:27 foo kernel: pnp: PnP ACPI: found 10 devices Nov 8 16:04:27 foo kernel: usbcore: registered new driver usbfs Nov 8 16:04:27 foo kernel: usbcore: registered new driver hub Nov 8 16:04:27 foo kernel: PCI: Using ACPI for IRQ routing Nov 8 16:04:27 foo kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Nov 8 16:04:27 foo kernel: NetLabel: Initializing Nov 8 16:04:27 foo kernel: NetLabel: domain hash size = 128 Nov 8 16:04:27 foo kernel: NetLabel: protocols = UNLABELED CIPSOv4 Nov 8 16:04:27 foo kernel: NetLabel: unlabeled traffic allowed by default Nov 8 16:04:27 foo kernel: pnp: 00:01: ioport range 0x800-0x87f has been reserved Nov 8 16:04:27 foo kernel: pnp: 00:01: ioport range 0x4000-0x407f could not be reserved Nov 8 16:04:27 foo kernel: pnp: 00:01: ioport range 0x4080-0x40ff has been reserved Nov 8 16:04:27 foo kernel: PCI: Bridge: 0000:00:02.0 Nov 8 16:04:27 foo kernel: IO window: d000-dfff Nov 8 16:04:27 foo kernel: MEM window: dd000000-dfefffff Nov 8 16:04:27 foo kernel: PREFETCH window: a0000000-afffffff Nov 8 16:04:27 foo kernel: PCI: Bridge: 0000:00:04.0 Nov 8 16:04:27 foo kernel: IO window: disabled. Nov 8 16:04:27 foo kernel: MEM window: disabled. Nov 8 16:04:27 foo kernel: PREFETCH window: disabled. Nov 8 16:04:27 foo kernel: PCI: Bridge: 0000:00:05.0 Nov 8 16:04:27 foo kernel: IO window: disabled. Nov 8 16:04:27 foo kernel: MEM window: dcf00000-dcffffff Nov 8 16:04:27 foo kernel: PREFETCH window: disabled. Nov 8 16:04:27 foo kernel: PCI: Bridge: 0000:00:0f.0 Nov 8 16:04:27 foo kernel: IO window: c000-cfff Nov 8 16:04:27 foo kernel: MEM window: dce00000-dcefffff Nov 8 16:04:27 foo kernel: PREFETCH window: b0000000-b0ffffff Nov 8 16:04:27 foo kernel: PCI: Bridge: 0000:00:13.0 Nov 8 16:04:27 foo kernel: IO window: disabled. Nov 8 16:04:27 foo kernel: MEM window: disabled. Nov 8 16:04:27 foo kernel: PREFETCH window: disabled. Nov 8 16:04:27 foo kernel: PCI: Bridge: 0000:00:18.0 Nov 8 16:04:27 foo kernel: IO window: b000-bfff Nov 8 16:04:27 foo kernel: MEM window: da000000-dcdfffff Nov 8 16:04:27 foo kernel: PREFETCH window: b1000000-cfffffff Nov 8 16:04:27 foo kernel: NET: Registered protocol family 2 Nov 8 16:04:27 foo kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 8 16:04:27 foo kernel: TCP established hash table entries: 131072 (order: 9, 2621440 bytes) Nov 8 16:04:27 foo kernel: TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) Nov 8 16:04:27 foo kernel: TCP: Hash tables configured (established 131072 bind 65536) Nov 8 16:04:27 foo kernel: TCP reno registered Nov 8 16:04:27 foo kernel: Simple Boot Flag at 0x7a set to 0x1 Nov 8 16:04:27 foo kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Nov 8 16:04:27 foo kernel: apm: disabled - APM is not SMP safe. Nov 8 16:04:27 foo kernel: audit: initializing netlink socket (disabled) Nov 8 16:04:27 foo kernel: audit(1163001829.876:1): initialized Nov 8 16:04:27 foo kernel: highmem bounce pool size: 64 pages Nov 8 16:04:27 foo kernel: Total HugeTLB memory allocated, 0 Nov 8 16:04:27 foo kernel: VFS: Disk quotas dquot_6.5.1 Nov 8 16:04:27 foo kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Nov 8 16:04:27 foo kernel: SELinux: Registering netfilter hooks Nov 8 16:04:27 foo kernel: Initializing Cryptographic API Nov 8 16:04:27 foo kernel: ksign: Installing public key data Nov 8 16:04:27 foo kernel: Loading keyring Nov 8 16:04:27 foo kernel: - Added public key 8BDC589434DBC709 Nov 8 16:04:27 foo kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key) Nov 8 16:04:27 foo kernel: io scheduler noop registered Nov 8 16:04:27 foo kernel: io scheduler anticipatory registered Nov 8 16:04:27 foo kernel: io scheduler deadline registered Nov 8 16:04:27 foo kernel: io scheduler cfq registered (default) Nov 8 16:04:27 foo kernel: pcie_portdrv_probe->Dev[007e:10de] has invalid IRQ. Check vendor BIOS Nov 8 16:04:27 foo kernel: assign_interrupt_mode Found MSI capability Nov 8 16:04:27 foo kernel: pcie_portdrv_probe->Dev[007e:10de] has invalid IRQ. Check vendor BIOS Nov 8 16:04:27 foo kernel: assign_interrupt_mode Found MSI capability Nov 8 16:04:27 foo kernel: pcie_portdrv_probe->Dev[007e:10de] has invalid IRQ. Check vendor BIOS Nov 8 16:04:27 foo kernel: assign_interrupt_mode Found MSI capability Nov 8 16:04:27 foo kernel: pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS Nov 8 16:04:27 foo kernel: assign_interrupt_mode Found MSI capability Nov 8 16:04:27 foo kernel: pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS Nov 8 16:04:27 foo kernel: assign_interrupt_mode Found MSI capability Nov 8 16:04:27 foo kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Nov 8 16:04:27 foo kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] Nov 8 16:04:27 foo kernel: ACPI: Getting cpuindex for acpiid 0x3 Nov 8 16:04:27 foo kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] Nov 8 16:04:27 foo kernel: ACPI: Getting cpuindex for acpiid 0x4 Nov 8 16:04:27 foo kernel: isapnp: Scanning for PnP cards... Nov 8 16:04:27 foo kernel: isapnp: No Plug & Play device found Nov 8 16:04:27 foo kernel: Real Time Clock Driver v1.12ac Nov 8 16:04:27 foo kernel: Non-volatile memory driver v1.2 Nov 8 16:04:27 foo kernel: Linux agpgart interface v0.101 (c) Dave Jones Nov 8 16:04:27 foo kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Nov 8 16:04:27 foo kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 8 16:04:27 foo kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 8 16:04:27 foo kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Nov 8 16:04:27 foo kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Nov 8 16:04:27 foo kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 8 16:04:27 foo kernel: NFORCE-MCP55: IDE controller at PCI slot 0000:00:0d.0 Nov 8 16:04:27 foo kernel: NFORCE-MCP55: chipset revision 161 Nov 8 16:04:27 foo kernel: NFORCE-MCP55: not 100% native mode: will probe irqs later Nov 8 16:04:27 foo kernel: NFORCE-MCP55: 0000:00:0d.0 (rev a1) UDMA133 controller Nov 8 16:04:27 foo kernel: ide0: BM-DMA at 0xecf0-0xecf7, BIOS settings: hda:pio, hdb:pio Nov 8 16:04:27 foo kernel: ide-floppy driver 0.99.newide Nov 8 16:04:27 foo kernel: usbcore: registered new driver libusual Nov 8 16:04:27 foo kernel: usbcore: registered new driver hiddev Nov 8 16:04:27 foo kernel: usbcore: registered new driver usbhid Nov 8 16:04:27 foo kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Nov 8 16:04:27 foo kernel: PNP: No PS/2 controller found. Probing ports directly. Nov 8 16:04:27 foo kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Nov 8 16:04:27 foo kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 8 16:04:27 foo kernel: mice: PS/2 mouse device common for all mice Nov 8 16:04:27 foo kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Nov 8 16:04:27 foo kernel: md: bitmap version 4.39 Nov 8 16:04:27 foo kernel: TCP bic registered Nov 8 16:04:27 foo kernel: Initializing IPsec netlink socket Nov 8 16:04:27 foo kernel: NET: Registered protocol family 1 Nov 8 16:04:27 foo kernel: NET: Registered protocol family 17 Nov 8 16:04:27 foo kernel: Using IPI No-Shortcut mode Nov 8 16:04:27 foo kernel: ACPI: (supports S0 S1 S3 S4 S5) Nov 8 16:04:27 foo kernel: Time: tsc clocksource has been installed. Nov 8 16:04:27 foo kernel: Freeing unused kernel memory: 244k freed Nov 8 16:04:27 foo rpc.statd[2354]: Version 1.0.9 Starting Nov 8 16:04:27 foo kernel: Write protecting the kernel read-only data: 385k Nov 8 16:04:27 foo kernel: USB Universal Host Controller Interface driver v3.0 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP20] enabled at IRQ 23 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [AP20] -> GSI 23 (level, low) -> IRQ 225 Nov 8 16:04:27 foo kernel: ohci_hcd 0000:00:0b.0: OHCI Host Controller Nov 8 16:04:27 foo kernel: ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 Nov 8 16:04:27 foo kernel: ohci_hcd 0000:00:0b.0: irq 225, io mem 0xdfff8000 Nov 8 16:04:27 foo kernel: usb usb1: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: hub 1-0:1.0: USB hub found Nov 8 16:04:27 foo kernel: hub 1-0:1.0: 10 ports detected Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP13] enabled at IRQ 22 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [AP13] -> GSI 22 (level, low) -> IRQ 233 Nov 8 16:04:27 foo kernel: ehci_hcd 0000:00:0b.1: EHCI Host Controller Nov 8 16:04:27 foo kernel: ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 Nov 8 16:04:27 foo kernel: ehci_hcd 0000:00:0b.1: debug port 1 Nov 8 16:04:27 foo kernel: ehci_hcd 0000:00:0b.1: irq 233, io mem 0xdfff7f00 Nov 8 16:04:27 foo kernel: ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Nov 8 16:04:27 foo rpc.statd[2354]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user Nov 8 16:04:27 foo kernel: usb usb2: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: hub 2-0:1.0: USB hub found Nov 8 16:04:27 foo kernel: hub 2-0:1.0: 10 ports detected Nov 8 16:04:27 foo kernel: SCSI subsystem initialized Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP17] enabled at IRQ 21 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [AP17] -> GSI 21 (level, low) -> IRQ 50 Nov 8 16:04:27 foo kernel: ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEC0 irq 50 Nov 8 16:04:27 foo kernel: ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEC8 irq 50 Nov 8 16:04:27 foo kernel: scsi0 : sata_nv Nov 8 16:04:27 foo kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 8 16:04:27 foo kernel: ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) Nov 8 16:04:27 foo kernel: ata1.00: ata1: dev 0 multi count 16 Nov 8 16:04:27 foo kernel: ata1.00: configured for UDMA/133 Nov 8 16:04:27 foo kernel: scsi1 : sata_nv Nov 8 16:04:27 foo kernel: usb 2-10: new high speed USB device using ehci_hcd and address 3 Nov 8 16:04:27 foo kernel: usb 2-10: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: libusual: modprobe for usb-storage succeeded, but module is not present Nov 8 16:04:27 foo kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 8 16:04:27 foo kernel: ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) Nov 8 16:04:27 foo kernel: ata2.00: ata2: dev 0 multi count 16 Nov 8 16:04:27 foo kernel: ata2.00: configured for UDMA/133 Nov 8 16:04:27 foo kernel: Vendor: ATA Model: ST3500641AS Rev: 3.AD Nov 8 16:04:27 foo kernel: Type: Direct-Access ANSI SCSI revision: 05 Nov 8 16:04:27 foo kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) Nov 8 16:04:27 foo kernel: sda: Write Protect is off Nov 8 16:04:27 foo kernel: SCSI device sda: drive cache: write back Nov 8 16:04:27 foo kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) Nov 8 16:04:27 foo kernel: sda: Write Protect is off Nov 8 16:04:27 foo kernel: SCSI device sda: drive cache: write back Nov 8 16:04:27 foo kernel: sda: sda1 sda2 sda3 Nov 8 16:04:27 foo kernel: sda: p3 exceeds device capacity Nov 8 16:04:27 foo kernel: sd 0:0:0:0: Attached scsi disk sda Nov 8 16:04:27 foo kernel: Vendor: ATA Model: ST3500641AS Rev: 3.AD Nov 8 16:04:27 foo kernel: Type: Direct-Access ANSI SCSI revision: 05 Nov 8 16:04:27 foo kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Nov 8 16:04:27 foo kernel: sdb: Write Protect is off Nov 8 16:04:27 foo kernel: SCSI device sdb: drive cache: write back Nov 8 16:04:27 foo kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Nov 8 16:04:27 foo kernel: sdb: Write Protect is off Nov 8 16:04:27 foo kernel: SCSI device sdb: drive cache: write back Nov 8 16:04:27 foo kernel: sdb: unknown partition table Nov 8 16:04:27 foo kernel: sd 1:0:0:0: Attached scsi disk sdb Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP16] enabled at IRQ 20 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AP16] -> GSI 20 (level, low) -> IRQ 58 Nov 8 16:04:27 foo kernel: ata3: SATA max UDMA/133 cmd 0xFE40 ctl 0xFE52 bmdma 0xFED0 irq 58 Nov 8 16:04:27 foo kernel: ata4: SATA max UDMA/133 cmd 0xFE60 ctl 0xFE72 bmdma 0xFED8 irq 58 Nov 8 16:04:27 foo kernel: scsi2 : sata_nv Nov 8 16:04:27 foo kernel: usb 1-3: new full speed USB device using ohci_hcd and address 2 Nov 8 16:04:27 foo kernel: usb 1-3: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: hub 1-3:1.0: USB hub found Nov 8 16:04:27 foo kernel: hub 1-3:1.0: 4 ports detected Nov 8 16:04:27 foo kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 16:04:27 foo kernel: usb 1-3.1: new full speed USB device using ohci_hcd and address 3 Nov 8 16:04:27 foo kernel: ata3.00: ATAPI, max UDMA/100 Nov 8 16:04:27 foo kernel: usb 1-3.1: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: hub 1-3.1:1.0: USB hub found Nov 8 16:04:27 foo kernel: hub 1-3.1:1.0: 4 ports detected Nov 8 16:04:27 foo kernel: ata3.00: configured for UDMA/100 Nov 8 16:04:27 foo kernel: scsi3 : sata_nv Nov 8 16:04:27 foo kernel: usb 1-3.2: new low speed USB device using ohci_hcd and address 4 Nov 8 16:04:27 foo kernel: usb 1-3.2: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: input: Belkin Components Belkin OmniView KVM Switch as /class/input/input0 Nov 8 16:04:27 foo kernel: input: USB HID v1.00 Keyboard [Belkin Components Belkin OmniView KVM Switch] on usb-0000:00:0b.0-3.2 Nov 8 16:04:27 foo kernel: input: Belkin Components Belkin OmniView KVM Switch as /class/input/input1 Nov 8 16:04:27 foo kernel: input: USB HID v1.00 Mouse [Belkin Components Belkin OmniView KVM Switch] on usb-0000:00:0b.0-3.2 Nov 8 16:04:27 foo kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 16:04:27 foo kernel: usb 1-3.1.1: new low speed USB device using ohci_hcd and address 5 Nov 8 16:04:27 foo kernel: ata4.00: ATAPI, max UDMA/33 Nov 8 16:04:27 foo kernel: usb 1-3.1.1: configuration #1 chosen from 1 choice Nov 8 16:04:27 foo kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 Nov 8 16:04:27 foo kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-3.1.1 Nov 8 16:04:27 foo kernel: ata4.00: configured for UDMA/33 Nov 8 16:04:27 foo kernel: Vendor: SONY Model: CDRWDVD CRX310S Rev: VDK2 Nov 8 16:04:27 foo kernel: Type: CD-ROM ANSI SCSI revision: 05 Nov 8 16:04:27 foo kernel: Vendor: TSSTcorp Model: DVD+-RW TS-H553A Rev: DE03 Nov 8 16:04:27 foo kernel: Type: CD-ROM ANSI SCSI revision: 05 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP27] enabled at IRQ 23 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [AP27] -> GSI 23 (level, low) -> IRQ 225 Nov 8 16:04:27 foo kernel: ata5: SATA max UDMA/133 cmd 0xFE80 ctl 0xFE92 bmdma 0xFEF0 irq 225 Nov 8 16:04:27 foo kernel: ata6: SATA max UDMA/133 cmd 0xFEA0 ctl 0xFEB2 bmdma 0xFEF8 irq 225 Nov 8 16:04:27 foo kernel: scsi4 : sata_nv Nov 8 16:04:27 foo kernel: ata5: SATA link down (SStatus 0 SControl 300) Nov 8 16:04:27 foo kernel: ATA: abnormal status 0x7F on port 0xFE87 Nov 8 16:04:27 foo kernel: scsi5 : sata_nv Nov 8 16:04:27 foo kernel: ata6: SATA link down (SStatus 0 SControl 300) Nov 8 16:04:27 foo kernel: ATA: abnormal status 0x7F on port 0xFEA7 Nov 8 16:04:27 foo kernel: Initializing USB Mass Storage driver... Nov 8 16:04:27 foo kernel: scsi6 : SCSI emulation for USB Mass Storage devices Nov 8 16:04:27 foo kernel: usbcore: registered new driver usb-storage Nov 8 16:04:27 foo kernel: USB Mass Storage support registered. Nov 8 16:04:27 foo kernel: Vendor: TEAC Model: USB HS-CF Card Rev: 4.00 Nov 8 16:04:27 foo kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 8 16:04:27 foo kernel: sd 6:0:0:0: Attached scsi removable disk sdc Nov 8 16:04:27 foo kernel: Vendor: TEAC Model: USB HS-xD/SM Rev: 4.00 Nov 8 16:04:27 foo kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 8 16:04:27 foo kernel: sd 6:0:0:1: Attached scsi removable disk sdd Nov 8 16:04:27 foo kernel: Vendor: TEAC Model: USB HS-MS Card Rev: 4.00 Nov 8 16:04:27 foo kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 8 16:04:27 foo kernel: sd 6:0:0:2: Attached scsi removable disk sde Nov 8 16:04:27 foo kernel: Vendor: TEAC Model: USB HS-SD Card Rev: 4.00 Nov 8 16:04:27 foo kernel: Type: Direct-Access ANSI SCSI revision: 00 Nov 8 16:04:27 foo kernel: sd 6:0:0:3: Attached scsi removable disk sdf Nov 8 16:04:27 foo kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx Nov 8 16:04:27 foo kernel: kjournald starting. Commit interval 5 seconds Nov 8 16:04:27 foo kernel: EXT3-fs: mounted filesystem with ordered data mode. Nov 8 16:04:27 foo kernel: SELinux: Disabled at runtime. Nov 8 16:04:27 foo kernel: SELinux: Unregistering netfilter hooks Nov 8 16:04:27 foo kernel: audit(1163001845.085:2): selinux=0 auid=4294967295 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP02] enabled at IRQ 18 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:04:0a.0[A] -> Link [AP02] -> GSI 18 (level, low) -> IRQ 66 Nov 8 16:04:27 foo kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[dceeb800-dceebfff] Max Packet=[2048] IR/IT contexts=[4/8] Nov 8 16:04:27 foo kernel: input: PC Speaker as /class/input/input3 Nov 8 16:04:27 foo kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 Nov 8 16:04:27 foo kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100 Nov 8 16:04:27 foo kernel: tg3.c:v3.65 (August 07, 2006) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP06] enabled at IRQ 18 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [AP06] -> GSI 18 (level, low) -> IRQ 66 Nov 8 16:04:27 foo kernel: eth0: Tigon3 [partno(BCM95751) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:18:8b:13:e8:9f Nov 8 16:04:27 foo kernel: eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] Nov 8 16:04:27 foo kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit] Nov 8 16:04:27 foo kernel: Floppy drive(s): fd0 is 1.44M Nov 8 16:04:27 foo kernel: FDC 0 is a post-1991 82077 Nov 8 16:04:27 foo kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 8 16:04:27 foo kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 Nov 8 16:04:27 foo kernel: scsi 2:0:0:0: Attached scsi generic sg2 type 5 Nov 8 16:04:27 foo kernel: scsi 3:0:0:0: Attached scsi generic sg3 type 5 Nov 8 16:04:27 foo kernel: sd 6:0:0:0: Attached scsi generic sg4 type 0 Nov 8 16:04:27 foo kernel: sd 6:0:0:1: Attached scsi generic sg5 type 0 Nov 8 16:04:27 foo kernel: sd 6:0:0:2: Attached scsi generic sg6 type 0 Nov 8 16:04:27 foo kernel: sd 6:0:0:3: Attached scsi generic sg7 type 0 Nov 8 16:04:27 foo kernel: nvidia: module license 'NVIDIA' taints kernel. Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP04] enabled at IRQ 16 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [AP04] -> GSI 16 (level, low) -> IRQ 74 Nov 8 16:04:27 foo kernel: PCI: Enabling device 0000:06:00.0 (0000 -> 0003) Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [AP04] -> GSI 16 (level, low) -> IRQ 74 Nov 8 16:04:27 foo kernel: NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006 Nov 8 16:04:27 foo kernel: sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray Nov 8 16:04:27 foo kernel: Uniform CD-ROM driver Revision: 3.20 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt Link [AP23] enabled at IRQ 22 Nov 8 16:04:27 foo kernel: ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [AP23] -> GSI 22 (level, low) -> IRQ 233 Nov 8 16:04:27 foo kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Nov 8 16:04:27 foo kernel: hda_codec: num_steps = 0 for NID=0x17 Nov 8 16:04:27 foo last message repeated 8 times Nov 8 16:04:27 foo kernel: lp: driver loaded but no devices found Nov 8 16:04:27 foo kernel: NET: Registered protocol family 10 Nov 8 16:04:27 foo kernel: lo: Disabled Privacy Extensions Nov 8 16:04:27 foo kernel: IPv6 over IPv4 tunneling driver Nov 8 16:04:27 foo kernel: ACPI: Power Button (FF) [PWRF] Nov 8 16:04:27 foo kernel: ACPI: Power Button (CM) [VBTN] Nov 8 16:04:27 foo kernel: ibm_acpi: ec object not found Nov 8 16:04:27 foo kernel: md: Autodetecting RAID arrays. Nov 8 16:04:27 foo kernel: md: autorun ... Nov 8 16:04:27 foo kernel: md: ... autorun DONE. Nov 8 16:04:27 foo kernel: device-mapper: multipath: version 1.0.4 loaded Nov 8 16:04:27 foo kernel: EXT3 FS on dm-4, internal journal Nov 8 16:04:27 foo kernel: kjournald starting. Commit interval 5 seconds Nov 8 16:04:27 foo kernel: EXT3 FS on dm-1, internal journal Nov 8 16:04:27 foo kernel: EXT3-fs: mounted filesystem with ordered data mode. Nov 8 16:04:27 foo kernel: Adding 4194296k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:4194296k Nov 8 16:04:27 foo kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Nov 8 16:04:27 foo kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Nov 8 16:04:27 foo kernel: Netfilter messages via NETLINK v0.30. Nov 8 16:04:27 foo kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack Nov 8 16:04:27 foo kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready Nov 8 16:04:27 foo kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. Nov 8 16:04:27 foo kernel: tg3: eth0: Flow control is on for TX and on for RX. Nov 8 16:04:27 foo kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Nov 8 16:04:27 foo hcid[2410]: Bluetooth HCI daemon Nov 8 16:04:27 foo kernel: Bluetooth: Core ver 2.10 Nov 8 16:04:27 foo kernel: NET: Registered protocol family 31 Nov 8 16:04:27 foo kernel: Bluetooth: HCI device and connection manager initialized Nov 8 16:04:27 foo kernel: Bluetooth: HCI socket layer initialized Nov 8 16:04:28 foo kernel: Bluetooth: L2CAP ver 2.8 Nov 8 16:04:28 foo kernel: Bluetooth: L2CAP socket layer initialized Nov 8 16:04:28 foo kernel: Bluetooth: RFCOMM socket layer initialized Nov 8 16:04:28 foo kernel: Bluetooth: RFCOMM TTY layer initialized Nov 8 16:04:28 foo kernel: Bluetooth: RFCOMM ver 1.8 Nov 8 16:04:28 foo sdpd[2416]: Bluetooth SDP daemon Nov 8 16:04:28 foo hcid[2410]: Register path:/org/bluez fallback:1 Nov 8 16:04:28 foo pcscd: pcscdaemon.c:464:main() pcsc-lite 1.3.1 daemon ready. Nov 8 16:04:28 foo kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Nov 8 16:04:28 foo hidd[2500]: Bluetooth HID daemon Nov 8 16:04:28 foo automount[2520]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master Nov 8 16:04:28 foo hpiod: 1.6.10 accepting connections at 2208... Nov 8 16:04:30 foo ntpd[2592]: ntpd 4.2.2p1@xxxxxxxx Fri Aug 18 13:04:14 UTC 2006 (1) Nov 8 16:04:30 foo ntpd[2593]: precision = 1.000 usec Nov 8 16:04:30 foo ntpd[2593]: Listening on interface wildcard, 0.0.0.0#123 Disabled Nov 8 16:04:30 foo ntpd[2593]: Listening on interface wildcard, ::#123 Disabled Nov 8 16:04:30 foo ntpd[2593]: Listening on interface lo, ::1#123 Enabled Nov 8 16:04:30 foo ntpd[2593]: Listening on interface eth0, foo::foo:foo:foo:foo#123 Enabled Nov 8 16:04:30 foo ntpd[2593]: Listening on interface lo, 127.0.0.1#123 Enabled Nov 8 16:04:30 foo ntpd[2593]: Listening on interface eth0, foo.foo.foo.foo#123 Enabled Nov 8 16:04:30 foo ntpd[2593]: kernel time sync status 0040 Nov 8 16:04:30 foo gpm[2604]: *** info [startup.c(95)]: Nov 8 16:04:30 foo gpm[2604]: Started gpm successfully. Entered daemon mode. Nov 8 16:04:31 foo ntpd[2593]: frequency initialized 101.209 PPM from /var/lib/ntp/drift Nov 8 16:04:35 foo avahi-daemon[2714]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). Nov 8 16:04:35 foo avahi-daemon[2714]: Successfully dropped root privileges. Nov 8 16:04:35 foo avahi-daemon[2714]: avahi-daemon 0.6.11 starting up. Nov 8 16:04:35 foo avahi-daemon[2714]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Nov 8 16:04:35 foo avahi-daemon[2714]: Successfully called chroot(). Nov 8 16:04:35 foo avahi-daemon[2714]: Successfully dropped remaining capabilities. Nov 8 16:04:35 foo avahi-daemon[2714]: No service found in /etc/avahi/services. Nov 8 16:04:35 foo avahi-daemon[2714]: New relevant interface eth0.IPv6 for mDNS. Nov 8 16:04:35 foo avahi-daemon[2714]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::218:8bff:fe13:e89f. Nov 8 16:04:35 foo avahi-daemon[2714]: New relevant interface eth0.IPv4 for mDNS. Nov 8 16:04:35 foo avahi-daemon[2714]: Joining mDNS multicast group on interface eth0.IPv4 with address 134.9.214.96. Nov 8 16:04:35 foo avahi-daemon[2714]: Network interface enumeration completed. Nov 8 16:04:35 foo avahi-daemon[2714]: Registering new address record for foo::foo:foo:foo:foo on eth0. Nov 8 16:04:35 foo avahi-daemon[2714]: Registering new address record for foo.foo.foo.foo on eth0. Nov 8 16:04:35 foo avahi-daemon[2714]: Registering HINFO record with values 'I686'/'LINUX'. Nov 8 16:04:36 foo avahi-daemon[2714]: Server startup complete. Host name is foo.local. Local service cookie is 2813546616. Nov 8 16:04:42 foo smartd[2836]: smartd version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen Nov 8 16:04:42 foo smartd[2836]: Home page is http://smartmontools.sourceforge.net/ Nov 8 16:04:42 foo smartd[2836]: Opened configuration file /etc/smartd.conf Nov 8 16:04:42 foo smartd[2836]: Configuration file /etc/smartd.conf parsed. Nov 8 16:04:42 foo smartd[2836]: Device: /dev/sda, opened Nov 8 16:04:42 foo smartd[2836]: Device: /dev/sda, not found in smartd database. Nov 8 16:04:43 foo smartd[2836]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. Nov 8 16:04:43 foo smartd[2836]: Device: /dev/sdb, opened Nov 8 16:04:43 foo smartd[2836]: Device: /dev/sdb, not found in smartd database. Nov 8 16:04:43 foo smartd[2836]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. Nov 8 16:04:43 foo smartd[2836]: Monitoring 2 ATA and 0 SCSI devices Nov 8 16:04:43 foo smartd[2838]: smartd has fork()ed into background mode. New PID=2838. Nov 8 16:04:43 foo init: open(/dev/pts/0): No such file or directory Nov 8 16:04:43 foo last message repeated 3 times Nov 8 16:04:44 foo pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found Nov 8 16:04:44 foo last message repeated 3 times Nov 8 16:04:54 foo gconfd (root-3033): starting (version 2.14.0), pid 3033 user 'root' Nov 8 16:04:54 foo gconfd (root-3033): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Nov 8 16:04:54 foo gconfd (root-3033): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Nov 8 16:04:54 foo gconfd (root-3033): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Nov 8 16:04:55 foo kernel: hda_codec: num_steps = 0 for NID=0x17 Nov 8 16:04:56 foo hcid[2410]: Default passkey agent (:1.7, /org/bluez/applet) registered Nov 8 16:04:56 foo gconfd (root-3033): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0 Nov 8 16:04:56 foo pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found Nov 8 16:04:56 foo last message repeated 4 times Nov 8 16:05:07 foo kernel: hda_codec: num_steps = 0 for NID=0x17 Nov 8 16:07:49 foo ntpd[2593]: synchronized to LOCAL(0), stratum 10 Nov 8 16:07:49 foo ntpd[2593]: kernel time sync enabled 0001 Nov 8 16:08:54 foo ntpd[2593]: synchronized to 193.120.142.71, stratum 1 Nov 8 16:21:54 foo Installed: yum-versionlock.noarch 1.0.1-1.fc6 Nov 8 16:21:54 foo Installed: yum-kernel-module.noarch 1.0.1-1.fc6 Nov 8 16:21:54 foo Installed: yum-tsflags.noarch 1.0.1-1.fc6 Nov 8 16:21:54 foo Installed: yum-priorities.noarch 1.0.1-1.fc6 Nov 8 16:21:54 foo Installed: yum-downloadonly.noarch 1.0.1-1.fc6 Nov 8 16:21:55 foo Installed: yum-protectbase.noarch 1.0.1-1.fc6 Nov 8 16:21:55 foo Installed: yum-skip-broken.noarch 1.0.1-1.fc6 Nov 8 16:21:55 foo Installed: yum-updateonboot.noarch 1.0.1-1.fc6 Nov 8 16:21:55 foo Installed: yum-allowdowngrade.noarch 1.0.1-1.fc6 Nov 8 16:21:55 foo Installed: yum-fedorakmod.noarch 1.0.1-1.fc6 Nov 8 16:21:55 foo Installed: yum-changelog.noarch 1.0.1-1.fc6 Nov 8 16:21:56 foo Installed: yum-utils.noarch 1.0.1-1.fc6 Nov 8 16:21:56 foo Installed: yum-fastestmirror.noarch 1.0.1-1.fc6 Nov 8 16:29:22 foo ntpd[2593]: time reset -0.484751 s Nov 8 16:33:11 foo ntpd[2593]: synchronized to LOCAL(0), stratum 10 Nov 8 16:34:15 foo ntpd[2593]: synchronized to 193.120.142.71, stratum 1 Nov 8 16:47:16 foo kernel: usb 1-3.1: USB disconnect, address 3 Nov 8 16:47:16 foo kernel: usb 1-3.1.1: USB disconnect, address 5 Nov 8 16:48:44 foo kernel: usb 1-3.1: new full speed USB device using ohci_hcd and address 6 Nov 8 16:48:45 foo kernel: usb 1-3.1: configuration #1 chosen from 1 choice Nov 8 16:48:45 foo kernel: hub 1-3.1:1.0: USB hub found Nov 8 16:48:45 foo kernel: hub 1-3.1:1.0: 4 ports detected Nov 8 16:48:45 foo kernel: usb 1-3.1.1: new low speed USB device using ohci_hcd and address 7 Nov 8 16:48:45 foo kernel: usb 1-3.1.1: configuration #1 chosen from 1 choice Nov 8 16:48:45 foo kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input4 Nov 8 16:48:45 foo kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-3.1.1 Nov 8 16:50:56 foo kernel: usb 1-3.1: USB disconnect, address 6 Nov 8 16:50:56 foo kernel: usb 1-3.1.1: USB disconnect, address 7 Nov 8 17:07:55 foo kernel: ata3.00: qc timeout (cmd 0xa0) Nov 8 17:07:55 foo kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Nov 8 17:07:55 foo kernel: ata3.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51 err 0x20 (timeout) Nov 8 17:07:55 foo kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Nov 8 17:07:55 foo kernel: ata4.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) Nov 8 17:07:55 foo kernel: ata3: soft resetting port Nov 8 17:07:56 foo kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 17:07:56 foo kernel: ata4: soft resetting port Nov 8 17:07:56 foo kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 17:08:26 foo kernel: ata3.00: qc timeout (cmd 0xa1) Nov 8 17:08:26 foo kernel: ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) Nov 8 17:08:26 foo kernel: ata3.00: revalidation failed (errno=-5) Nov 8 17:08:26 foo kernel: ata3: failed to recover some devices, retrying in 5 secs Nov 8 17:08:26 foo kernel: ata4.00: qc timeout (cmd 0xa1) Nov 8 17:08:26 foo kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Nov 8 17:08:26 foo kernel: ata4.00: revalidation failed (errno=-5) Nov 8 17:08:26 foo kernel: ata4: failed to recover some devices, retrying in 5 secs Nov 8 17:08:31 foo kernel: ata3: hard resetting port Nov 8 17:08:31 foo kernel: ata4: hard resetting port Nov 8 17:08:31 foo kernel: ata3: SRST failed (status 0xFF) Nov 8 17:08:31 foo kernel: ata3: SRST failed (err_mask=0x100) Nov 8 17:08:31 foo kernel: ata3: follow-up softreset failed, retrying in 5 secs Nov 8 17:08:31 foo kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 17:08:36 foo kernel: ata3: hard resetting port Nov 8 17:08:37 foo kernel: ata3: SRST failed (status 0xFF) Nov 8 17:08:37 foo kernel: ata3: SRST failed (err_mask=0x100) Nov 8 17:08:37 foo kernel: ata3: follow-up softreset failed, retrying in 5 secs Nov 8 17:08:42 foo kernel: ata3: hard resetting port Nov 8 17:08:42 foo kernel: ata3: SRST failed (status 0xFF) Nov 8 17:08:42 foo kernel: ata3: SRST failed (err_mask=0x100) Nov 8 17:08:42 foo kernel: ata3: reset failed, giving up Nov 8 17:08:42 foo kernel: ata3.00: disabled Nov 8 17:08:42 foo kernel: ata3: EH complete Nov 8 17:09:02 foo kernel: ata4.00: qc timeout (cmd 0xa1) Nov 8 17:09:02 foo kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Nov 8 17:09:02 foo kernel: ata4.00: revalidation failed (errno=-5) Nov 8 17:09:02 foo kernel: ata4: failed to recover some devices, retrying in 5 secs Nov 8 17:09:07 foo kernel: ata4: hard resetting port Nov 8 17:09:07 foo kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 17:09:37 foo kernel: ata4.00: qc timeout (cmd 0xa1) Nov 8 17:09:37 foo kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Nov 8 17:09:37 foo kernel: ata4.00: revalidation failed (errno=-5) Nov 8 17:09:37 foo kernel: ata4.00: disabled Nov 8 17:09:38 foo kernel: ata4: EH complete Nov 8 17:10:03 foo kernel: usb 1-3.1: new full speed USB device using ohci_hcd and address 8 Nov 8 17:10:03 foo kernel: usb 1-3.1: configuration #1 chosen from 1 choice Nov 8 17:10:03 foo kernel: hub 1-3.1:1.0: USB hub found Nov 8 17:10:03 foo kernel: hub 1-3.1:1.0: 4 ports detected Nov 8 17:10:04 foo kernel: usb 1-3.1.1: new low speed USB device using ohci_hcd and address 9 Nov 8 17:10:04 foo kernel: usb 1-3.1.1: configuration #1 chosen from 1 choice Nov 8 17:10:04 foo kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input5 Nov 8 17:10:04 foo kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-3.1.1 Nov 8 19:47:22 foo kernel: usb 2-10: reset high speed USB device using ehci_hcd and address 3 Nov 8 19:47:33 foo kernel: usb 2-10: device not accepting address 3, error -110 Nov 8 19:47:33 foo kernel: usb 2-10: reset high speed USB device using ehci_hcd and address 3 Nov 8 19:47:45 foo kernel: usb 2-10: device not accepting address 3, error -110 Nov 8 19:47:45 foo kernel: usb 2-10: reset high speed USB device using ehci_hcd and address 3 Nov 8 19:47:55 foo kernel: usb 2-10: device not accepting address 3, error -110 Nov 8 19:47:55 foo kernel: usb 2-10: reset high speed USB device using ehci_hcd and address 3 Nov 8 19:48:06 foo kernel: usb 2-10: device not accepting address 3, error -110 Nov 8 19:48:06 foo kernel: sd 6:0:0:2: scsi: Device offlined - not ready after error recovery Nov 8 19:48:06 foo kernel: usb 2-10: USB disconnect, address 3 Nov 8 19:48:06 foo kernel: sdd : READ CAPACITY failed. Nov 8 19:48:06 foo kernel: sdd : status=0, message=00, host=7, driver=00 Nov 8 19:48:06 foo kernel: sdd : sense not available. Nov 8 19:48:06 foo kernel: sdd: Write Protect is off Nov 8 19:48:06 foo kernel: sdd: assuming drive cache: write through Nov 8 19:48:06 foo kernel: sdd : READ CAPACITY failed. Nov 8 19:48:06 foo kernel: sdd : status=0, message=00, host=7, driver=00 Nov 8 19:48:06 foo kernel: sdd : sense not available. Nov 8 19:48:06 foo kernel: sdd: Write Protect is off Nov 8 19:48:06 foo kernel: sdd: assuming drive cache: write through Nov 8 19:48:06 foo kernel: sdd:<3>Buffer I/O error on device sdd, logical block 0 Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdd, logical block 0 Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdd, logical block 0 Nov 8 19:48:06 foo kernel: unable to read partition table Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo last message repeated 3 times Nov 8 19:48:06 foo kernel: sdc : READ CAPACITY failed. Nov 8 19:48:06 foo kernel: sdc : status=0, message=00, host=1, driver=00 Nov 8 19:48:06 foo kernel: sdc : sense not available. Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: sdc: Write Protect is off Nov 8 19:48:06 foo kernel: sdc: assuming drive cache: write through Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo last message repeated 4 times Nov 8 19:48:06 foo kernel: sdc : READ CAPACITY failed. Nov 8 19:48:06 foo kernel: sdc : status=0, message=00, host=1, driver=00 Nov 8 19:48:06 foo kernel: sdc : sense not available. Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: sdc: Write Protect is off Nov 8 19:48:06 foo kernel: sdc: assuming drive cache: write through Nov 8 19:48:06 foo kernel: sdc:<3>scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdc, logical block 0 Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdc, logical block 0 Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdc, logical block 0 Nov 8 19:48:06 foo kernel: unable to read partition table Nov 8 19:48:06 foo kernel: scsi 6:0:0:0: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo last message repeated 3 times Nov 8 19:48:06 foo kernel: sdf : READ CAPACITY failed. Nov 8 19:48:06 foo kernel: sdf : status=0, message=00, host=1, driver=00 Nov 8 19:48:06 foo kernel: sdf : sense not available. Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: sdf: Write Protect is off Nov 8 19:48:06 foo kernel: sdf: assuming drive cache: write through Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo last message repeated 4 times Nov 8 19:48:06 foo kernel: sdf : READ CAPACITY failed. Nov 8 19:48:06 foo kernel: sdf : status=0, message=00, host=1, driver=00 Nov 8 19:48:06 foo kernel: sdf : sense not available. Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: sdf: Write Protect is off Nov 8 19:48:06 foo kernel: sdf: assuming drive cache: write through Nov 8 19:48:06 foo kernel: sdf:<3>scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdf, logical block 0 Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdf, logical block 0 Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: Buffer I/O error on device sdf, logical block 0 Nov 8 19:48:06 foo kernel: unable to read partition table Nov 8 19:48:06 foo kernel: scsi 6:0:0:3: rejecting I/O to dead device Nov 8 19:48:06 foo kernel: usb 2-10: new high speed USB device using ehci_hcd and address 4 Nov 8 19:48:17 foo kernel: usb 2-10: device not accepting address 4, error -110 Nov 8 19:48:18 foo kernel: usb 2-10: new high speed USB device using ehci_hcd and address 5 Nov 8 19:48:29 foo kernel: usb 2-10: device not accepting address 5, error -110 Nov 8 19:48:29 foo kernel: usb 2-10: new high speed USB device using ehci_hcd and address 6 Nov 8 19:48:40 foo kernel: usb 2-10: device not accepting address 6, error -110 Nov 8 19:48:40 foo kernel: usb 2-10: new high speed USB device using ehci_hcd and address 7 Nov 8 19:48:50 foo kernel: usb 2-10: device not accepting address 7, error -110 - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
