Re: [PATCH] libata: lengthen interval between SRST set and clear

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo wrote:

> Jim, can you please test the following patch?  It only adds
> ATA_FLAG_HRST_TO_RESUME.

Yes, just ATA_FLAG_HRST_TO_RESUME also works fine:

Unplug:
[  220.354520] ata3: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0x2 frozen
[  220.354591] ata3: hard resetting port
[  221.075828] ata3: SATA link down (SStatus 0 SControl 300)
[  221.075833] ata3: failed to recover some devices, retrying in 5 secs
[  226.080467] ata3: hard resetting port
[  226.804116] ata3: SATA link down (SStatus 0 SControl 300)
[  226.804121] ata3: failed to recover some devices, retrying in 5 secs
[  231.805716] ata3: hard resetting port
[  232.529366] ata3: SATA link down (SStatus 0 SControl 300)
[  232.529373] ata3.00: disabled
[  233.033123] ata3: EH pending after completion, repeating EH (cnt=4)
[  233.033133] ata3: EH complete
[  233.033141] ata3.00: detaching (SCSI 2:0:0:0)

Replug:
[  247.048727] ata3: exception Emask 0x10 SAct 0x0 SErr 0x150000 action 0x2 frozen
[  247.048798] ata3: hard resetting port
[  253.867127] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  253.867930] ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
[  253.868982] ata3.00: configured for UDMA/133
[  253.868986] ata3: EH pending after completion, repeating EH (cnt=4)
[  253.868994] ata3: EH complete
[  253.869342]   Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
[  253.869351]   Type:   Direct-Access                      ANSI SCSI revision: 05
[  253.869507] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[  253.869737] sdc: Write Protect is off
[  253.869740] sdc: Mode Sense: 00 3a 00 00
[  253.869931] SCSI device sdc: drive cache: write back
[  253.870082] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[  253.870189] sdc: Write Protect is off
[  253.870192] sdc: Mode Sense: 00 3a 00 00
[  253.870372] SCSI device sdc: drive cache: write back
[  253.870378]  sdc: sdc1
[  253.887285] sd 2:0:0:0: Attached scsi disk sdc

Thanks,
-jim

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux