[PATCH 2/4] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODE

[Tejun Heo <htejun@xxxxxxxxx>]

libata EH used to perform ata_set_mode() iff the EH session performed
reset as indicated by ATA_EHI_DID_RESET.  This is incorrect because
->dev_config() called by revalidation is allowed to modify transfer
mode which ata_set_mode() should take care of.  This patch implements
the following two flags.

* ATA_EHI_SETMODE: set during EH to schedule ata_set_mode().  Both new
  device attachment and revalidation set this flag.

* ATA_EHI_POST_SETMODE: set while the device is revalidated after
  ata_set_mode().  Post-setmode revalidation is different from initial
  configuaration and EH revalidation in that ->dev_config() is not
  allowed tune transfer mode.  LLD can use this flag to determine
  whether it's allowed to tune transfer mode.  Note that POST_SETMODE
  ->dev_config() is guaranteed to be preceded by non-POST_SETMODE
  ->dev_config().

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
 drivers/ata/libata-core.c |    3 +++
 drivers/ata/libata-eh.c   |   13 +++++++++++--
 include/linux/libata.h    |    2 ++
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e9f76c6..f5164db 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2155,6 +2155,7 @@ int ata_down_xfermask_limit(struct ata_d
 
 static int ata_dev_set_mode(struct ata_device *dev)
 {
+	struct ata_eh_context *ehc = &dev->ap->eh_context;
 	unsigned int err_mask;
 	int rc;
 
@@ -2169,7 +2170,9 @@ static int ata_dev_set_mode(struct ata_d
 		return -EIO;
 	}
 
+	ehc->i.flags |= ATA_EHI_POST_SETMODE;
 	rc = ata_dev_revalidate(dev, 0);
+	ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7c44644..4776488 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1653,6 +1653,11 @@ static int ata_eh_revalidate_and_attach(
 
 			ata_eh_done(ap, dev, ATA_EH_REVALIDATE);
 
+			/* Configuration may have changed, reconfigure
+			 * transfer mode.
+			 */
+			ehc->i.flags |= ATA_EHI_SETMODE;
+
 			/* schedule the scsi_rescan_device() here */
 			queue_work(ata_aux_wq, &(ap->scsi_rescan_task));
 		} else if (dev->class == ATA_DEV_UNKNOWN &&
@@ -1675,6 +1680,9 @@ static int ata_eh_revalidate_and_attach(
 			spin_lock_irqsave(ap->lock, flags);
 			ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
 			spin_unlock_irqrestore(ap->lock, flags);
+
+			/* new device discovered, configure transfer mode */
+			ehc->i.flags |= ATA_EHI_SETMODE;
 		}
 	}
 
@@ -1990,13 +1998,14 @@ static int ata_eh_recover(struct ata_por
 	if (rc)
 		goto dev_fail;
 
-	/* configure transfer mode if the port has been reset */
-	if (ehc->i.flags & ATA_EHI_DID_RESET) {
+	/* configure transfer mode if necessary */
+	if (ehc->i.flags & ATA_EHI_SETMODE) {
 		rc = ata_set_mode(ap, &dev);
 		if (rc) {
 			down_xfermask = 1;
 			goto dev_fail;
 		}
+		ehc->i.flags &= ~ATA_EHI_SETMODE;
 	}
 
 	/* suspend devices */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d71971e..2f0d4d9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -284,6 +284,8 @@ enum {
 
 	ATA_EHI_DID_RESET	= (1 << 16), /* already reset this port */
 	ATA_EHI_PRINTINFO	= (1 << 17), /* print configuration info */
+	ATA_EHI_SETMODE		= (1 << 18), /* configure transfer mode */
+	ATA_EHI_POST_SETMODE	= (1 << 19), /* revaildating after setmode */
 
 	ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
 
-- 
1.4.2.3


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html