Linux IDE Archive

• Thread Index

• [PATCH 08/11] libata: implement dummy port
  • From: Tejun Heo
• [PATCH 10/11] libata: replace ap->hard_port_no with ap->port_no
  • From: Tejun Heo
• [PATCH 07/11] libata: fix several bugs in reworked legacy handling
  • From: Tejun Heo
• [PATCH 05/11] libata: fix ata_device_add() error path
  • From: Tejun Heo
• [PATCH 09/11] libata: use dummy port for stolen legacy ports
  • From: Tejun Heo
• [PATCH 11/11] libata: kill unused hard_port_no and legacy_mode
  • From: Tejun Heo
• [PATCH 02/11] [libata] some function renaming
  • From: Tejun Heo
• [PATCHSET] libata: improve initialization and legacy handling
  • From: Tejun Heo
• [PATCH 01/11] ata_piix: fix host_set private_data intialization
  • From: Tejun Heo
• [PATCH 04/11] [libata] Kill 'count' var in ata_device_add()
  • From: Tejun Heo
• [PATCH 03/11] [libata] manually inline ata_host_remove()
  • From: Tejun Heo
• Re: libata question
  • From: Tejun Heo
• Re: libata question
  • From: Roger Oberholtzer
• Re: libata question
  • From: Tejun Heo
• Re: libata question
  • From: Roger Oberholtzer
• Excessive SATA timeout on boot.
  • From: Stephen Hemminger
• Re: libata question
  • From: Tejun Heo
• libata question
  • From: Roger Oberholtzer
• Re: [PATCH] ahci: skip protocol test altogether in spurious interrupt code
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Andrew Morton
• [PATCH] ahci: skip protocol test altogether in spurious interrupt code
  • From: Unicorn Chang
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: J.A. Magallón
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Jeff Garzik
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Alan Cox
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Alan Cox
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Alan Cox
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: J.A. Magallón
• Re: raid1 sata_promise initialization order problem
  • From: Deyan Chepishev
• Re: [2.6.18-rc2-mm1] libata: DMA speed too slow for cdrecord
  • From: Alan Cox
• Re: please add support for the VT8251
  • From: Tejun Heo
• Re: Hotplug with sata_nv
  • From: Tejun Heo
• Re: Possible fake host protected area (hpa) detected in ide drive causing SectorIdNotFound
  • From: Roman Medina-Heigl Hernandez
• Re: [sata_sil] kernel 2.6.17(-mm2) test - timeout issue
  • From: Tejun Heo
• Re: [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: Tejun Heo
• please add support for the VT8251
  • From: Ronan
• [2.6.18-rc2-mm1] libata: DMA speed too slow for cdrecord
  • From: J.A. Magallón
• raid1 sata_promise initialization order problem
  • From: Deyan Chepishev
• Re: [PATCH] libata: cosmetic changes to PM functions
  • From: Jeff Garzik
• Re: [PATCH 1/6] ahci: relocate several internal functions
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 2/2] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: Vojtech Pavlik
• [2.6.18-rc2-mm1] libata ate one PATA channel
  • From: J.A. Magallón
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: Rafael J. Wysocki
• Re: Panics with libata functions in stack.
  • From: Tejun Heo
• Possible fake host protected area (hpa) detected in ide drive causing SectorIdNotFound
  • From: Roman Medina-Heigl Hernandez
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: Pavel Machek
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: Jason Lunz
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: Pavel Machek
• Re: [patch v3] amd74xx: fix hang on resume from ram
  • From: David Brownell
• Re: [PATCH 0/2]ACPI support for SATA/PATA
  • From: Mark Lord
• Panics with libata functions in stack.
  • From: Nicholas Dronen
• Re: PATCH: Add full Compact Flash support to libata
  • From: Mark Lord
• Re: PATCH: Add full Compact Flash support to libata
  • From: Alan Cox
• Re: PATCH: Add full Compact Flash support to libata
  • From: Mark Lord
• Re: libata pata_pdc2027x success on sparc64
  • From: Sergei Shtylyov
• PATCH: Add full Compact Flash support to libata
  • From: Alan Cox
• Re: libata pata_pdc2027x success on sparc64
  • From: Albert Lee
• Re: [PATCH 0/2]ACPI support for SATA/PATA
  • From: zhao, forrest
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: David Brownell
• Re: [Fwd: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree]
  • From: Brent Casavant
• Re: [Fwd: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree]
  • From: Sergei Shtylyov
• [PATCH] remove dma_base2 field form ide_hwif_t
  • From: Sergei Shtylyov
• Re: [PATCH 0/2]ACPI support for SATA/PATA
  • From: Mark Lord
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: Pavel Machek
• [PATCH] libata: cosmetic changes to PM functions
  • From: Tejun Heo
• [PATCH 2/2] libata: implement setting _SDD
  • From: zhao, forrest
• [PATCH 1/2] libata: implement to get tf's from _GTF and execute them
  • From: zhao, forrest
• [PATCH 0/2]ACPI support for SATA/PATA
  • From: zhao, forrest
• [PATCH 5/6] ahci: separate out ahci_reset_controller() and ahci_init_controller()
  • From: Tejun Heo
• [PATCH 6/6] ahci: implement Power Management support
  • From: Tejun Heo
• [PATCH 4/6] libata: improve driver initialization and deinitialization
  • From: Tejun Heo
• [PATCH 1/6] ahci: relocate several internal functions
  • From: Tejun Heo
• [PATCH 3/6] ahci: simplify ahci_start_engine()
  • From: Tejun Heo
• [PATCHSET] ahci: updated power management support
  • From: Tejun Heo
• [PATCH 2/6] ahci: cosmetic changes to ahci_start/stop_engine()
  • From: Tejun Heo
• [patch v3] amd74xx: fix hang on resume from ram
  • From: Jason Lunz
• [patch v2] amd74xx: fix hang on resume from ram
  • From: Jason Lunz
• Re: [linux-pm] [patch, rft] amd74xx: implement suspend-to-ram
  • From: David Brownell
• Re: [patch, rft] amd74xx: implement suspend-to-ram
  • From: Pavel Machek
• PCI ID addition to sata_promise.c
  • From: Steve Brown
• Re: [Fwd: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree]
  • From: Alan Cox
• Re: tighten ATA kconfig dependancies
  • From: Alan Cox
• Re: libata pata_pdc2027x success on sparc64
  • From: Alan Cox
• Re: [PATCH] avoid releasing twice the same region on ide_release_iomio_dma()
  • From: Sergei Shtylyov
• Re: [PATCH 09/12] libata: implement powersave timer
  • From: Jens Axboe
• Re: [Fwd: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree]
  • From: Jeremy Higdon
• Re: [PATCH] avoid releasing twice the same region on ide_release_iomio_dma()
  • From: Greg Freemyer
• [Fwd: - ide-remove-dma_base2-field-form-ide_hwif_t.patch removed from -mm tree]
  • From: Sergei Shtylyov
• Re: [PATCH] avoid releasing twice the same region on ide_release_iomio_dma()
  • From: Aristeu Sergio Rozanski Filho
• Re: [PATCH] avoid releasing twice the same region on ide_release_iomio_dma()
  • From: Sergei Shtylyov
• [PATCH] avoid releasing twice the same region on ide_release_iomio_dma()
  • From: Aristeu Sergio Rozanski Filho
• Re: [PATCH] Make sure we scan SWARM IDE interface for devices
  • From: Sergei Shtylyov
• [PATCH] via82cxxx: Add VIA VT8237A southbridge ID
  • From: Daniel Drake
• [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: John Keller
• Re: [PATCH 1/3] libata: implement hotplug by polling
  • From: Tejun Heo
• Re: [PATCH 08/12] libata: implement interface power management infrastructure
  • From: Tejun Heo
• Re: [PATCHSET] libata: implement runtime link powersave
  • From: Tejun Heo
• Re: [PATCH 03/17] libata-link: introduce ata_link
  • From: Tejun Heo
• Re: [PATCHSET 3/3] implement PMP support, take 2
  • From: Tejun Heo
• Re: [PATCH 03/12] libata-pmp: implement ATA_LFLAG_DISABLED
  • From: Tejun Heo
• Re: [PATCH 5/6] libata-pmp-prep: implement ops->qc_defer()
  • From: Tejun Heo
• Re: [PATCH 09/12] libata: implement powersave timer
  • From: Tejun Heo
• Re: [sata_sil] kernel 2.6.17(-mm2) test - timeout issue
  • From: Martin Ammermüller
• [patch, rft] amd74xx: implement suspend-to-ram
  • From: Jason Lunz
• Private driver support emails should be avoided.
  • From: Jeff Garzik
• [PATCH] sgiioc4: Always share IRQ
  • From: Brent Casavant
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: Andrew Morton
• [PATCH] Make sure we scan SWARM IDE interface for devices
  • From: Martin Michlmayr
• AHCI suspend/resume on thinkpad x60
  • From: Pavel Machek
• Re: [PATCH 2/2] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• [PATCH 5/5] ahci: implement the AHCI suspend/resume
  • From: zhao, forrest
• [PATCH 1/5] ahci: definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
  • From: zhao, forrest
• [PATCH 2/5] ahci: definition of ahci_port_standby() and ahci_port_spinup()
  • From: zhao, forrest
• [PATCH 0/5] AHCI suspend/resume support --take5
  • From: zhao, forrest
• [PATCH 4/5] ahci: update new users of new added functions
  • From: zhao, forrest
• [PATCH 3/5] ahci: definition of ahci_port_suspend()
  • From: zhao, forrest
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: Jeremy Higdon
• [PATCH] sgiioc4: Always share IRQ
  • From: Brent Casavant
• Re: [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: implement hotplug by polling
  • From: Jeff Garzik
• Re: [PATCH 1/6] The redefinition of ahci_start_engine() andahci_stop_engine()
  • From: Jeff Garzik
• Re: [PATCHSET 3/3] implement PMP support, take 2
  • From: Jeff Garzik
• Re: [PATCH 03/12] libata-pmp: implement ATA_LFLAG_DISABLED
  • From: Jeff Garzik
• Re: [PATCH 01/12] libata-pmp: add PMP related constants, fields, ops and update helpers
  • From: Jeff Garzik
• Re: [PATCH 5/6] libata-pmp-prep: implement ops->qc_defer()
  • From: Jeff Garzik
• Re: [PATCH 17/17] libata-link: update Power Management to handle PMP links
  • From: Jeff Garzik
• Re: [PATCH 03/17] libata-link: introduce ata_link
  • From: Jeff Garzik
• Re: [PATCH 02/17] libata-link: add PMP related ATA constants
  • From: Jeff Garzik
• Re: [PATCH 09/12] libata: implement powersave timer
  • From: Jens Axboe
• Re: [PATCH 11/12] ahci: implement link powersave
  • From: Jeff Garzik
• Re: [PATCH 10/12] libata: implement standard powersave methods
  • From: Jeff Garzik
• Re: [PATCH 09/12] libata: implement powersave timer
  • From: Jeff Garzik
• Re: [PATCH 08/12] libata: implement interface power management infrastructure
  • From: Jeff Garzik
• Re: [PATCHSET] libata: implement runtime link powersave
  • From: Jeff Garzik
• Re: [PATCH 07/12] libata: implement sata_update_scontrol()
  • From: Jeff Garzik
• Re: [PATCH 04/12] libata: implement ata_all_ports list
  • From: Jeff Garzik
• Re: [PATCH 03/12] libata: add more SATA specific constants and macros to ata.h
  • From: Jeff Garzik
• Re: [PATCH] libata: improve EH action and EHI flag handling
  • From: Jeff Garzik
• Re: [PATCH] libata: fix eh_skip_recovery condition
  • From: Jeff Garzik
• Re: [PATCH] libata: fix autopsy ehc->i.action and ehc->i.dev handling
  • From: Jeff Garzik
• Re: PATCH: Add ata_generic driver
  • From: Jeff Garzik
• Re: PATCH: Fixes for PIIX driver
  • From: Jeff Garzik
• [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: John Keller
• Re: libata pata_pdc2027x success on sparc64
  • From: Mikael Pettersson
• Re: libata SATA support for Sil 3726 port multiplier
  • From: Edward Falk
• Re: libata SATA support for Sil 3726 port multiplier
  • From: Fredrik Sjoholm
• Re: libata SATA support for Sil 3726 port multiplier
  • From: Tejun Heo
• Re: libata pata_pdc2027x success on sparc64
  • From: Sergei Shtylyov
• Re: [linux-pm] amd74xx crashes when resuming from STR
  • From: Vojtech Pavlik
• Re: Status of HPT372A driver?
  • From: Jonathan McDowell
• Re: harddisk or controller broken?
  • From: Justin Piszcz
• harddisk or controller broken?
  • From: Benjamin Schieder
• Re: [linux-pm] amd74xx crashes when resuming from STR
  • From: Pavel Machek
• Re: Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
  • From: Neil Brown
• libata pata_pdc2027x success on sparc64
  • From: Mikael Pettersson
• Re: Status of HPT372A driver?
  • From: Sergei Shtylyov
• Re: Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
  • From: Bill Davidsen
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: Réf. : [PATCH 01/12] libata: add msec_to_jiffies()
  • From: Tejun Heo
• Réf. : [PATCH 01/12] libata: add msec_to_jiffies()
  • From: Matthieu CASTET
• 2.6.18-rc2 oops/crash
  • From: linux
• [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
  • From: Tejun Heo
• [PATCH 1/3] libata: implement hotplug by polling
  • From: Tejun Heo
• [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps
  • From: Tejun Heo
• [RFT][PATCHSET] hotplug polling, take 3
  • From: Tejun Heo
• [PATCH 09/12] libata: implement powersave timer
  • From: Tejun Heo
• [PATCH 12/12] sata_sil24: implement link powersave
  • From: Tejun Heo
• [PATCH 07/12] libata: implement sata_update_scontrol()
  • From: Tejun Heo
• [PATCH 11/12] ahci: implement link powersave
  • From: Tejun Heo
• [PATCH 05/12] libata: make counting functions global
  • From: Tejun Heo
• [PATCH 10/12] libata: implement standard powersave methods
  • From: Tejun Heo
• [PATCH 08/12] libata: implement interface power management infrastructure
  • From: Tejun Heo
• [PATCH 04/12] libata: implement ata_all_ports list
  • From: Tejun Heo
• [PATCH 01/12] libata: add msec_to_jiffies()
  • From: Tejun Heo
• [PATCH 03/12] libata: add more SATA specific constants and macros to ata.h
  • From: Tejun Heo
• [PATCH 02/12] libata: add ata_id_has_sata() and use it in ata_id_has_ncq()
  • From: Tejun Heo
• [PATCH 06/12] libata: add ata_port_nr_ready()
  • From: Tejun Heo
• [PATCHSET] libata: implement runtime link powersave
  • From: Tejun Heo
• Re: tighten ATA kconfig dependancies
  • From: Randy Dunlap
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Sven Riedel
• Re: tighten ATA kconfig dependancies
  • From: Adrian Bunk
• Re: tighten ATA kconfig dependancies
  • From: Sam Ravnborg
• Re: tighten ATA kconfig dependancies
  • From: Arjan van de Ven
• Re: tighten ATA kconfig dependancies
  • From: Sam Ravnborg
• Re: [PATCH] libata: PHY reset requires writing 0x4 to SControl
  • From: Tejun Heo
• Re: tighten ATA kconfig dependancies
  • From: Bodo Eggert
• amd74xx crashes when resuming from STR
  • From: Jason Lunz
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Greg Freemyer
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Sven Riedel
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Mark Lord
• Re: tighten ATA kconfig dependancies
  • From: Arjan van de Ven
• Re: tighten ATA kconfig dependancies
  • From: Adrian Bunk
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Sven Riedel
• Re: tighten ATA kconfig dependancies
  • From: Arjan van de Ven
• Re: tighten ATA kconfig dependancies
  • From: Sam Ravnborg
• Re: tighten ATA kconfig dependancies
  • From: Arjan van de Ven
• tighten ATA kconfig dependancies
  • From: Dave Jones
• [2.6 patch] drivers/ide/: cleanups
  • From: Adrian Bunk
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Mark Lord
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Justin Piszcz
• Re: Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Mark Lord
• Re: Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Mark Lord
• Re: Marvell 88SX6081 Support
  • From: Mark Lord
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Mark Lord
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Justin Piszcz
• Re: Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Mark Lord
• Re: Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Mark Lord
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Adrian Bunk
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: David Greaves
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Benjamin Herrenschmidt
• Re: [PATCH v1] ata_piix: attempt to fix
  • From: cjacker huang
• [BUG] sata_promise unaligned PCI accesses on sparc64
  • From: Mikael Pettersson
• Re: [PATCH v1] ata_piix: attempt to fix
  • From: Greg KH
• Promise PDC20575 chip doesn't see PATA discs :(((
  • From: Crazy AMD K7
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: Jeff Garzik
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: John Keller
• [PATCH 2/2] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• [PATCH 1/2] libata: Add ata_host_set_init
  • From: Brian King
• [PATCH 0/2] libata: Support SATA attached via SAS
  • From: Brian King
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Erik Mouw
• Re: Slow perfs with IDE SSD
  • From: François-Julien Marbaud
• Re: [PATCH v1] ata_piix: attempt to fix
  • From: unicorn chang
• [PATCH 6/6] Implement the AHCI suspend/resume
  • From: zhao, forrest
• [PATCH 4/6] The definition of ahci_port_suspend()
  • From: zhao, forrest
• [PATCH 5/6] Update new users of new added functions
  • From: zhao, forrest
• [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup()
  • From: zhao, forrest
• [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
  • From: zhao, forrest
• [PATCH 1/6] The redefinition of ahci_start_engine() andahci_stop_engine()
  • From: zhao, forrest
• [PATCH 0/6] AHCI suspend/resume support --take5
  • From: zhao, forrest
• Re: Ejecting removable disk causes a flood of ALLOW_MEDIUM_REMOVAL
  • From: Douglas Gilbert
• Ejecting removable disk causes a flood of ALLOW_MEDIUM_REMOVAL
  • From: Albert Lee
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: Brent Casavant
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: David Greaves
• Re: Problem with SiI 3112 SATA Controller/Driver ?
  • From: Ellis
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: Jeff Garzik
• Re: [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: Jeremy Higdon
• RE: + sata-add-pci-id.patch added to -mm tree
  • From: Gaston, Jason D
• Re: Errors and resets using sata_promise and libata 1.20
  • From: Justin Piszcz
• [PATCH 1/1] - sgiioc4: fixup use of mmio ops
  • From: John Keller
• Re: + sata-add-pci-id.patch added to -mm tree
  • From: Jeff Garzik
• Re: [PATCH 0/6] AHCI suspend/resume support --take4
  • From: Jeff Garzik
• Errors and resets using sata_promise and libata 1.20
  • From: Erik Frederiksen
• Re: Slow perfs with IDE SSD
  • From: Tejun Heo
• Re: Slow perfs with IDE SSD
  • From: Tejun Heo
• Re: Problem with SiI 3112 SATA Controller/Driver ?
  • From: Tejun Heo
• Re: [PATCH -mm] IDE core: must_check fixes
  • From: Alan Cox
• Slow perfs with IDE SSD
  • From: François-Julien Marbaud
• Marvell 88SX6081 Support
  • From: Charles Tassell
• [PATCH -mm] IDE core: must_check fixes
  • From: Randy.Dunlap
• Re: libata SATA support for Sil 3726 port multiplier
  • From: Fredrik Sjoholm
• [PATCH 2.6.17 v2] ata_piix device probe fixes
  • From: Jeff Garzik
• Re: [PATCH 2.6.17] ata_piix device probe fixes
  • From: Jeff Garzik
• [PATCH 2.6.17] ata_piix device probe fixes
  • From: Jeff Garzik
• Problem with SiI 3112 SATA Controller/Driver ?
  • From: Ellis
• Re: "Many lost ticks" while writing DVD-RAM
  • From: Christian Pernegger
• Re: PATCH: Move IDE to unmaintained, drop reference to old git tree
  • From: Bartlomiej Zolnierkiewicz
• "Many lost ticks" while writing DVD-RAM
  • From: Christian Pernegger
• Re: libata SATA support for Sil 3726 port multiplier
  • From: Jeremy Jackson
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Adrian Bunk
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Alan Cox
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Alan Cox
• [PATCH v1] ata_piix: attempt to fix
  • From: Jeff Garzik
• Re: LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Alan Cox
• [2.6 patch] drivers/ide/: cleanups
  • From: Adrian Bunk
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Sergei Shtylyov
• Re: PATCH: Fixes for PIIX driver
  • From: Brad Campbell
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Arjan van de Ven
• Re: [2.6 patch] drivers/ide/: cleanups
  • From: Michael Tokarev
• [2.6 patch] drivers/ide/: cleanups
  • From: Adrian Bunk
• LibPATA code issues / 2.6.17.3 (What is the next step?)
  • From: Justin Piszcz
• PATCH: Rework legacy handling to remove much of the cruft
  • From: Alan Cox
• [PATCH 6/6] Implement the AHCI suspend/resume
  • From: zhao, forrest
• [PATCH 5/6] Update the users of new added functions
  • From: zhao, forrest
• [PATCH 4/6] The definition of ahci_port_suspend()
  • From: zhao, forrest
• [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
  • From: zhao, forrest
• [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup()
  • From: zhao, forrest
• [PATCH 1/6]The definition of ahci_start_engine() and ahci_stop_engine()
  • From: zhao, forrest
• [PATCH 0/6] AHCI suspend/resume support --take4
  • From: zhao, forrest
• Re: Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
  • From: Tejun Heo
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Albert Lee
• Test feedback 2.6.17.4+libata-tj-stable (EH, hotplug)
  • From: Christian Pernegger
• strange data from iostat (2.6.16.24)
  • From: Sebastian Kuzminsky
• Re: [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
  • From: Jens Axboe
• PATCH: (2 of 2) Jmicron driver plumbing and quirk
  • From: Alan Cox
• PATCH (1 of 2): Jmicron driver
  • From: Alan Cox
• PATCH: Add ata_generic driver
  • From: Alan Cox
• PATCH: Fixes for PIIX driver
  • From: Alan Cox
• Re: Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Alan Cox
• Re: [ANNOUNCE] new revision of PMP support patchsets are about to be posted
  • From: Tejun Heo
• [PATCH] libata: improve EH action and EHI flag handling
  • From: Tejun Heo
• [PATCH] libata: fix eh_skip_recovery condition
  • From: Tejun Heo
• Re: [ANNOUNCE] libata-tj-stable against v2.6.17.4 available
  • From: Tejun Heo
• Follow up? LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: SATA command timeouts
  • From: Sven Riedel
• Re: sata_sil via and seagate
  • From: Robin Humble
• [PATCH 6/6] Implement the AHCI suspend/resume
  • From: zhao, forrest
• Re: [PATCH 6/6] Implement the AHCI suspend/resume
  • From: zhao, forrest
• SATA regression 2.6.16.24 -> 2.6.17.4
  • From: Sebastian Kuzminsky
• [PATCH 6/6] Implement the AHCI suspend/resume
  • From: zhao, forrest
• [PATCH 5/6] Update the users of new added functions
  • From: zhao, forrest
• [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup()
  • From: zhao, forrest
• [PATCH 4/6] The definition of ahci_port_suspend()
  • From: zhao, forrest
• [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
  • From: zhao, forrest
• [PATCH 1/6]The definition of ahci_start_engine() and ahci_stop_engine()
  • From: zhao, forrest
• [PATCH 0/6] AHCI suspend/resume support --take4
  • From: zhao, forrest
• [2.6.17 backport] VIA VT8251 SATA support
  • From: Daniel Drake
• Re: LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4 (found the opcode=0x35)!
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: 2.6.18-rc1-mm1
  • From: Jeff Garzik
• ATAPI DVD-ROM freezes with 2.6 kernels
  • From: Vlad
• [RFC: 2.6 patch] drivers/ide/: possible cleanups
  • From: Adrian Bunk
• Re: Alan's PATA patch vs. Gentoo-ized sata_promise
  • From: David Lloyd
• Alan's PATA patch vs. Gentoo-ized sata_promise
  • From: David Lloyd
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Tejun Heo
• Re: sata_sil via and seagate
  • From: Tejun Heo
• [RFT][PATCH] ata_piix: implement proper PCS handling for ICH8
  • From: Tejun Heo
• [PATCH] libata: various alloc/free cleanups
  • From: Jeff Garzik
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Tejun Heo
• SATA command timeouts
  • From: Sven Riedel
• [ANNOUNCE] libata-tj-stable against v2.6.17.4 available
  • From: Tejun Heo
• Re: [ANNOUNCE] new revision of PMP support patchsets are about to be posted
  • From: Tejun Heo
• [PATCH] libata: fix autopsy ehc->i.action and ehc->i.dev handling
  • From: Tejun Heo
• [PATCH 06/12] sata_sil24: rename PMP related constants
  • From: Tejun Heo
• [PATCH 11/12] sata_sil24: implement PMP support
  • From: Tejun Heo
• [PATCH 12/12] sata_sil24: implement PORT_RST
  • From: Tejun Heo
• [PATCH 10/12] sata_sil24: separate out sil24_do_softreset()
  • From: Tejun Heo
• [PATCH 08/12] sata_sil24: replace sil24_update_tf() with sil24_read_tf()
  • From: Tejun Heo
• [PATCH 09/12] sata_sil24: separate out sil24_exec_polled_cmd()
  • From: Tejun Heo
• [PATCH 05/12] libata-pmp: hook PMP support and enable it
  • From: Tejun Heo
• [PATCH 07/12] sata_sil24: add PMP related constants
  • From: Tejun Heo
• [PATCH 04/12] libata-pmp: implement Port Multiplier support
  • From: Tejun Heo
• [PATCH 02/12] libata-pmp: update ata_eh_reset() for PMP
  • From: Tejun Heo
• [PATCH 03/12] libata-pmp: implement ATA_LFLAG_DISABLED
  • From: Tejun Heo
• [PATCH 01/12] libata-pmp: add PMP related constants, fields, ops and update helpers
  • From: Tejun Heo
• [PATCHSET 3/3] implement PMP support, take 2
  • From: Tejun Heo
• [PATCH 5/6] libata-pmp-prep: implement ops->qc_defer()
  • From: Tejun Heo
• [PATCH 6/6] libata-pmp-prep: implement qc_defer helpers
  • From: Tejun Heo
• [PATCH 1/6] libata-pmp-prep: add @new_class to ata_dev_revalidate()
  • From: Tejun Heo
• [PATCH 2/6] libata-pmp-prep: make a number of functions global to libata
  • From: Tejun Heo
• [PATCH 4/6] libata-pmp-prep: add @is_cmd to ata_tf_to_fis()
  • From: Tejun Heo
• [PATCH 3/6] libata-pmp-prep: separate out sata_link_hardreset()
  • From: Tejun Heo
• [PATCHSET 2/3] prep for PMP support, take 2
  • From: Tejun Heo
• [PATCH 13/17] libata-link: update ata_scsi_error() to handle PMP links
  • From: Tejun Heo
• [PATCH 17/17] libata-link: update Power Management to handle PMP links
  • From: Tejun Heo
• [PATCH 15/17] libata-link: update EH to deal with PMP links
  • From: Tejun Heo
• [PATCH 16/17] libata-link: update hotplug to handle PMP links
  • From: Tejun Heo
• [PATCH 07/17] libata-link: linkify reset
  • From: Tejun Heo
• [PATCH 11/17] libata-link: implement ata_link_abort()
  • From: Tejun Heo
• [PATCH 12/17] libata-link: add PMP links
  • From: Tejun Heo
• [PATCH 14/17] libata-link: update ata_dev_configure() to deal with PMP links
  • From: Tejun Heo
• [PATCH 05/17] libata-link: linkify PHY-related functions
  • From: Tejun Heo
• [PATCH 08/17] libata-link: linkify config/EH related functions
  • From: Tejun Heo
• [PATCH 09/17] libata-link: separate out link initialization functions
  • From: Tejun Heo
• [PATCH 10/17] libata-link: implement link->reset_tries
  • From: Tejun Heo
• [PATCH 06/17] libata-link: linkify EH action helpers
  • From: Tejun Heo
• [PATCH 03/17] libata-link: introduce ata_link
  • From: Tejun Heo
• [PATCH 04/17] libata-link: implement and use link/device iterators
  • From: Tejun Heo
• [PATCH 01/17] libata-link: separate out ata_eh_handle_dev_fail()
  • From: Tejun Heo
• [PATCH 02/17] libata-link: add PMP related ATA constants
  • From: Tejun Heo
• [PATCHSET 1/3] implement ata_link, take 2
  • From: Tejun Heo
• [ANNOUNCE] new revision of PMP support patchsets are about to be posted
  • From: Tejun Heo
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Jeff Garzik
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Andrew Morton
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Jeff Garzik
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Jeff Garzik
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Andrew Morton
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Andrew Morton
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Jeff Garzik
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: [PATCH 15/24] ata_generic - generic BIOS setup SFF ATA driver
  • From: Jeff Garzik
• Re: [PATCH 15/24] ata_generic - generic BIOS setup SFF ATA driver
  • From: Alan Cox
• Re: [PATCH 23/24] libata: Enable per device speed setting
  • From: Alan Cox
• Re: [PATCH 23/24] libata: Enable per device speed setting
  • From: Jeff Garzik
• Re: [PATCH 24/24] jmicron: Missed one
  • From: Jeff Garzik
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Jeff Garzik
• Re: libATA PATA status report, new patch
  • From: Alan Cox
• Re: [PATCH 11/24] jmicron: Add quirks to force the device into a sane mode
  • From: Alan Cox
• Re: [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: Jeff Garzik
• Re: [PATCH 07/24] libata: Fix the host_set hacks and sort out simplex mode
  • From: Alan Cox
• Re: [PATCH 17/24] pata_qdi: Fix return code
  • From: Jeff Garzik
• Re: [PATCH 15/24] ata_generic - generic BIOS setup SFF ATA driver
  • From: Jeff Garzik
• Re: libATA PATA status report, new patch
  • From: Wakko Warner
• Re: [PATCH 14/24] it821x: Fix the ATAPI autodma setup
  • From: Jeff Garzik
• Re: [PATCH 13/24] My name is Ingo Molnar, you killed my make allyesconfig, prepare to die
  • From: Jeff Garzik
• Re: [PATCH 11/24] jmicron: Add quirks to force the device into a sane mode
  • From: Jeff Garzik
• Re: [PATCH 07/24] libata: Fix the host_set hacks and sort out simplex mode
  • From: Jeff Garzik
• Re: PATA updates (rebased)
  • From: Jeff Garzik
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Mark Lord
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: LibPATA code issues / 2.6.15.4
  • From: Mark Lord
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Mark Lord
• Re: Re: Via IDE Bus Master controller IRQ number?
  • From: Yan Luo
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Ric Wheeler
• Re: LibPATA code issues / 2.6.15.4
  • From: Justin Piszcz
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Jeff Garzik
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Mark Lord
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Mark Lord
• Re: libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Jeff Garzik
• libata EH appears to be NFG up to 2.6.17 (at least).
  • From: Mark Lord
• Re: Problems with ICH7R (AHCI) and WD5000YS
  • From: Christian Pernegger
• [git patches] libata update
  • From: Jeff Garzik
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
  • From: Jeff Garzik
• Re: [PATCH 01/11] libata: implement ATA_EHI_RESUME_LINK
  • From: Jeff Garzik
• Re: [PATCH] libata: cosmetic, replace ap_lock w/ ap->lock in ata_scsi_error()
  • From: Jeff Garzik
• Re: [PATCH] libata: add ap->pflags and move core dynamic flags to it
  • From: Jeff Garzik
• Re: [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata: Conditionally set host->max_cmd_len
  • From: Jeff Garzik
• Re: [PATCH] sata_vsc: data_xfer should use mmio
  • From: Jeff Garzik
• sata_sil via and seagate
  • From: Robin Humble
• Re: [PATCH] libata: PHY reset requires writing 0x4 to SControl
  • From: Martin Hicks
• [PATCH] libata: PHY reset requires writing 0x4 to SControl
  • From: Martin Hicks
• Re: PATA updates (rebased)
  • From: Alan Cox
• Re: [PATCH] PCI: Move various PCI IDs to header file
  • From: Brent Casavant
• Re: Via IDE Bus Master controller IRQ number?
  • From: Sergei Shtylyov
• Re: PATA updates (rebased)
  • From: Erik Mouw
• Re: [PATCH 0/6] AHCI suspend/resume support --take3
  • From: Jens Axboe
• [PATCH 1/3] libata: implement hotplug by polling
  • From: Tejun Heo
• [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
  • From: Tejun Heo
• [RFT][PATCHSET] hotplug polling, take 2
  • From: Tejun Heo
• [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps
  • From: Tejun Heo
• Re: [PATCH 0/6] AHCI suspend/resume support --take3
  • From: zhao, forrest
• Via IDE Bus Master controller IRQ number?
  • From: Yan Luo
• Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
  • From: Jochen Heuer
• Re: [RFT][PATCHSET] hotplug polling
  • From: Tejun Heo
• [PATCH 04/24] pata_pcmcia: Make drivers/scsi/pata_pcmcia.c:pcmcia_remove_one() static
  • From: alan
• [PATCH 20/24] jmicron: Further clean up
  • From: alan
• [PATCH 16/24] jmicron: IDE old type driver.
  • From: alan
• [PATCH 18/24] ide jmicron: Finish writing
  • From: alan
• [PATCH 23/24] libata: Enable per device speed setting
  • From: alan
• [PATCH 14/24] it821x: Fix the ATAPI autodma setup
  • From: alan
• [PATCH 19/24] jmicron: It works better if you get the file name right
  • From: alan
• [PATCH 17/24] pata_qdi: Fix return code
  • From: alan
• [PATCH 03/24] pata_amd - new chips
  • From: alan
• [PATCH 24/24] jmicron: Missed one
  • From: alan
• [PATCH 21/24] ata_jmicro: Fix an escapee
  • From: alan
• [PATCH 08/24] pata_it821x: Fix pass through
  • From: alan
• [PATCH 07/24] libata: Fix the host_set hacks and sort out simplex mode
  • From: alan
• [PATCH 11/24] jmicron: Add quirks to force the device into a sane mode
  • From: alan
• [PATCH 22/24] jmicron: Jmicron multifunction setup
  • From: alan
• [PATCH 13/24] My name is Ingo Molnar, you killed my make allyesconfig, prepare to die
  • From: alan
• [PATCH 10/24] ahci: Ensure that we don't grab both functions
  • From: alan
• [PATCH 12/24] jmicron: Configuration
  • From: alan
• PATA updates (rebased)
  • From: alan
• [PATCH 09/24] pci_ids: Add JMicron identifiers as we need them in various drivers and quirks
  • From: alan
• [PATCH 15/24] ata_generic - generic BIOS setup SFF ATA driver
  • From: alan
• [PATCH 05/24] pata_ali: Revisions below 0x20 need CD config poking too
  • From: alan
• [PATCH 01/24] ata_piix TIME0/TIME1 setup
  • From: alan
• [PATCH 06/24] Sort out MC65 compile for now
  • From: alan
• [PATCH 02/24] pata_ali - further debug work
  • From: alan
• Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
  • From: Mark Lord
• [RFT][PATCHSET] hotplug polling
  • From: Tejun Heo
• [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrutps
  • From: Tejun Heo
• [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
  • From: Tejun Heo
• [PATCH 1/3] libata: implement hotplug by polling
  • From: Tejun Heo
• Re: [PATCH 0/6] AHCI suspend/resume support --take3
  • From: Jens Axboe
• PATCH: Move IDE to unmaintained, drop reference to old git tree
  • From: Alan Cox
• libata SATA support for Sil 3726 port multiplier
  • From: Fredrik Sjoholm
• [PATCH 07/11] libata: reimplement controller-wide PM
  • From: Tejun Heo
• [PATCH 10/11] sata_sil24: separate out sil24_init_controller()
  • From: Tejun Heo
• [PATCH 11/11] sata_sil24: add suspend/sleep support
  • From: Tejun Heo
• [PATCH 08/11] sata_sil: separate out sil_init_controller()
  • From: Tejun Heo
• [PATCH 05/11] libata: implement PM EH actions
  • From: Tejun Heo
• [PATCH 09/11] sata_sil: add suspend/sleep support
  • From: Tejun Heo
• [PATCH 06/11] libata: reimplement per-dev PM
  • From: Tejun Heo
• [PATCH 03/11] libata: implement ATA_EHI_NO_AUTOPSY and QUIET
  • From: Tejun Heo
• [PATCHSET] new Power Management for libata, take 4
  • From: Tejun Heo
• [PATCH 02/11] libata: clean up debounce parameters and improve parameter selection
  • From: Tejun Heo
• [PATCH 01/11] libata: implement ATA_EHI_RESUME_LINK
  • From: Tejun Heo
• [PATCH 04/11] libata: separate out __ata_ehi_hotplugged()
  • From: Tejun Heo
• Re: sata_sil - broke at some point
  • From: Jason Pfingstmann
• Re: sata_sil - broke at some point
  • From: Tejun Heo
• sata_sil - broke at some point
  • From: Jason Pfingstmann
• [PATCH] libata: cosmetic, replace ap_lock w/ ap->lock in ata_scsi_error()
  • From: Tejun Heo
• [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()
  • From: Tejun Heo
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: Albert Lee
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: Albert Lee
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: matthieu castet
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: Albert Lee
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: matthieu castet
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: matthieu castet
• Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
  • From: Jochen Heuer
• Re: Parking hard disk head from drivers
  • From: Michael Hanselmann
• Problems with ICH7R (AHCI) and WD5000YS
  • From: Christian Pernegger
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Greg KH
• [PATCH 7/15] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available
  • From: Dominik Brodowski
• Re: [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
  • From: Alan Cox
• Re: [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
  • From: Andrew Morton
• Re: [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
  • From: Alan Cox
• Re: [PATCHSET] new Power Management for libata, take 3
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: make both legacy ports share one host_set , take #2
  • From: Jeff Garzik
• [PATCH -mm] ide_end_drive_cmd(): avoid instruction pipeline stall
  • From: Andreas Mohr
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: Alan Cox
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: Albert Lee
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: castet . matthieu
• Re: + via-pata-controller-xfer-fixes.patch added to -mm tree
  • From: Albert Lee
• [PATCH 9/9] sata_sx4.c conversion
  • From: Borislav Petkov
• [PATCH 8/9] sata_sil24.c conversion
  • From: Borislav Petkov
• [PATCH 7/9] sata_promise.c conversion
  • From: Borislav Petkov
• [PATCH 6/9] sata_mv.c conversion
  • From: Borislav Petkov
• [PATCH 5/9] libata-eh.c conversion
  • From: Borislav Petkov
• [PATCH 4/9] libata-core.c conversion
  • From: Borislav Petkov
• [PATCH 3/9] ata_piix.c conversion
  • From: Borislav Petkov
• [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Borislav Petkov
• [PATCHSET] libata dbg scheme conversion, take 2
  • From: Borislav Petkov
• [PATCH 2/9] ahci.c conversion
  • From: Borislav Petkov
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Tejun Heo
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Greg KH
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Greg KH
• Re: long boot delay for SATA cdrom on current 2.6.17-git
  • From: Tejun Heo
• long boot delay for SATA cdrom on current 2.6.17-git
  • From: Greg KH
• Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Tejun Heo
• Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Tejun Heo
• Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Borislav Petkov
• Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Tejun Heo
• Re: [DOC] SATA status report updated
  • From: Tejun Heo
• Re: sata_vsc and device hotplug
  • From: Tejun Heo
• Re: [PATCHSET] libata dbg scheme conversion, take 1
  • From: Tejun Heo
• Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Borislav Petkov
• Re: [PATCHSET] libata dbg scheme conversion, take 1
  • From: Borislav Petkov
• Re: [PATCH 4/9] libata-core.c conversion
  • From: Borislav Petkov
• Re: [PATCHSET] libata dbg scheme conversion, take 1
  • From: Tejun Heo
• Re: [PATCH 2/9] ahci.c conversion
  • From: Borislav Petkov
• Re: [PATCH 5/9] libata-eh.c conversion
  • From: Tejun Heo
• Re: [PATCH 4/9] libata-core.c conversion
  • From: Tejun Heo
• Re: [PATCH 3/9] ata_piix.c conversion
  • From: Tejun Heo
• Re: [PATCH 2/9] ahci.c conversion
  • From: Tejun Heo
• Re: [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Tejun Heo
• [PATCH 9/9] sata_sx4.c conversion
  • From: Borislav Petkov
• [PATCH 5/9] libata-eh.c conversion
  • From: Borislav Petkov
• [PATCH 7/9] sata_promise.c conversion
  • From: Borislav Petkov
• [PATCH 6/9] sata_mv.c conversion
  • From: Borislav Petkov
• [PATCH 8/9] sata_sil24.c conversion
  • From: Borislav Petkov
• [PATCH 4/9] libata-core.c conversion
  • From: Borislav Petkov
• [PATCH 1/9] libata: change debugging macros/adjust dbg levels
  • From: Borislav Petkov
• [PATCH 3/9] ata_piix.c conversion
  • From: Borislav Petkov
• [PATCH 2/9] ahci.c conversion
  • From: Borislav Petkov
• [PATCHSET] libata dbg scheme conversion, take 1
  • From: Borislav Petkov
• Re: 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry) FIXED!!
  • From: Udo van den Heuvel
• sata_vsc and device hotplug
  • From: Martin Hicks
• Re: [DOC] SATA status report updated
  • From: Martin Hicks
• Re: [DOC] SATA status report updated
  • From: Greg Freemyer
• Re: 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry)
  • From: Sergey Vlasov
• [PATCH 6/6] Implement the AHCI suspend/resume
  • From: zhao, forrest
• [PATCH 4/6] The definition of ahci_port_suspend()
  • From: zhao, forrest
• [PATCH 5/6] Update the users of new added functions
  • From: zhao, forrest
• [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup()
  • From: zhao, forrest
• [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx()
  • From: zhao, forrest
• [PATCH 1/6]The definition of ahci_start_engine() and ahci_stop_engine()
  • From: zhao, forrest
• [PATCH 0/6] AHCI suspend/resume support --take3
  • From: zhao, forrest
• Re: [PATCH 4/4] libata: Check per device max cdb length for SAS - drop
  • From: Brian King
• [PATCH-stable] ahci: skip SRST for offline port
  • From: Tejun Heo
• 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry)
  • From: Udo van den Heuvel
• [PATCH] ata_piix: implement cached PCS and apply it to ICH5
  • From: Tejun Heo
• [PATCH 1/2] ata_piix: add host_set private structure
  • From: Tejun Heo
• [PATCH-stable 2/2] ata_piix: implement cached PCS and apply it to ICH5
  • From: Tejun Heo
• [PATCH-stable 1/2] ata_piix: add host_set private structure
  • From: Tejun Heo
• Just added Enjoy multi-orgasms using this powerful thing
  • From: Gerry
• [PATCH] libata: add ap->pflags and move core dynamic flags to it
  • From: Tejun Heo
• [PATCH] sata_vsc: data_xfer should use mmio
  • From: Martin Hicks
• Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
  • From: Alan Cox
• [PATCH 3/3] ipr: Support attaching SATA devices
  • From: Brian King
• [PATCH 2/3] ipr: Handle new SAS error codes
  • From: Brian King
• [PATCH 1/3] ipr: Add some hardware defined types for SATA
  • From: Brian King
• [PATCH 0/3] ipr: Support SATA devices
  • From: Brian King
• [PATCH 4/4] libata: Check per device max cdb length for SAS
  • From: Brian King
• [PATCH 2/4] libata: Add ata_host_set_init
  • From: Brian King
• [PATCH 3/4] libata: Add support for SATA attachment to SAS adapters
  • From: Brian King
• [PATCH 1/4] libata: Conditionally set host->max_cmd_len
  • From: Brian King
• [PATCH 0/4] libata: Support SATA attached via SAS
  • From: Brian King
• Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
  • From: Alan Cox
• Re: libata new EH issue - ATAPI device error not properly reported
  • From: Albert Lee
• Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
  • From: Albert Lee
• Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
  • From: Tejun Heo
• Re: [PATCH] libata: add host_set->next for legacy two host_sets case, take #3
  • From: Albert Lee
• Re: libata new EH issue - ATAPI device error not properly reported
  • From: Tejun Heo
• libata new EH issue - ATAPI device error not properly reported
  • From: Albert Lee
• Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
  • From: Jochen Heuer
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Borislav Petkov
• [PATCH 2/2] libata-dev: pata_pdc2027x - remove ATA_ENABLE_PATA ifdef
  • From: Albert Lee
• [PATCH 1/2] libata-dev: pata_pdc2027x minor fix for new EH
  • From: Albert Lee
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Borislav Petkov
• Re: Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
  • From: Tejun Heo
• Re: [git-patches] new Power Management for libata, take 3
  • From: Tejun Heo
• [PATCH 6/8] sata_sil: add suspend/sleep support
  • From: Tejun Heo
• [PATCH 5/8] sata_sil: separate out sil_init_controller()
  • From: Tejun Heo
• [PATCH 7/8] sata_sil24: separate out sil24_init_controller()
  • From: Tejun Heo
• [PATCH 8/8] sata_sil24: add suspend/sleep support
  • From: Tejun Heo
• [PATCH 2/8] libata: reimplement per-dev PM
  • From: Tejun Heo
• [PATCH 1/8] libata: implement PM EH actions
  • From: Tejun Heo
• [PATCH 4/8] libata: reimplement controller-wide PM
  • From: Tejun Heo
• [PATCHSET] new Power Management for libata, take 3
  • From: Tejun Heo
• [PATCH 3/8] libata: move ata_flush_cache() from libata-core.c to libata-eh.c
  • From: Tejun Heo
• Re: [git patches] libata update
  • From: Jeff Garzik
• Re: [git patches] libata update
  • From: Linus Torvalds
• [PATCH][RFT] HPT3xx: init code rewrite
  • From: Sergei Shtylyov
• Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4
  • From: Jochen Heuer
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Tejun Heo
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Tejun Heo
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Borislav Petkov
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
  • From: Tejun Heo
• [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2
  • From: Borislav Petkov
• Re: [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Tejun Heo
• [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure()
  • From: Borislav Petkov
• [PATCH 2/n] libata-core.c conversion to new debug scheme, part 2 of $N (50% done)
  • From: Borislav Petkov
• Re: regarding ata_msg_*()
  • From: Tejun Heo
• Re: regarding ata_msg_*()
  • From: Jeff Garzik
• [DOC] SATA status report updated
  • From: Jeff Garzik
• Re: Improving sata_vsc PCI ID usage...
  • From: Greg KH
• Re: regarding ata_msg_*()
  • From: Tejun Heo
• [git patches] libata update
  • From: Jeff Garzik
• Re: [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: add ICH6/7/8 to Kconfig
  • From: Jeff Garzik
• Re: [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
  • From: Jeff Garzik
• Re: [PATCH] libata: cosmetic updates
  • From: Jeff Garzik
• Re: [PATCH 01/15] libata: move ata_eh_clear_action() upward
  • From: Jeff Garzik
• Improving sata_vsc PCI ID usage...
  • From: Jeff Garzik
• Re: [PATCH 4/6] libata: Add ata_host_flags
  • From: Alan Cox
• Re: [PATCH 4/6] libata: Add ata_host_flags
  • From: Brian King
• Re: PATCH: SC1200 debug printk
  • From: Alan Cox
• Re: PATCH: SC1200 debug printk
  • From: Valdis . Kletnieks
• Re: [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
  • From: Andi Kleen
• [RFC: 2.6 patch] drivers/ide/: possible cleanups
  • From: Adrian Bunk
• [PATCH] ata_piix: add ICH6/7/8 to Kconfig
  • From: Auke Kok
• PATCH: Set err_stops_fifo for newer Promise as well
  • From: Alan Cox
• PATCH: Clean up pdc202xx_old so its more readable (done so I could work on libata ports)
  • From: Alan Cox
• PATCH: Housekeeping on IDE drivers
  • From: Alan Cox
• PATCH: Fix error handling for drives which clear the FIFO on error
  • From: Alan Cox
• PATCH: SC1200 debug printk
  • From: Alan Cox
• PATCH: backport piix fixes from libata into the legacy driver
  • From: Alan Cox
• PATCH: Clean up siimage
  • From: Alan Cox
• PATCH: Old IDE, fix SATA detection for cabling
  • From: Alan Cox
• [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs
  • From: Tejun Heo
• Re: More information on ATI IXP failure in git9
  • From: Andi Kleen
• Re: More information on ATI IXP failure in git9
  • From: Andi Kleen
• Re: More information on ATI IXP failure in git9
  • From: Tejun Heo
• Re: More information on ATI IXP failure in git9
  • From: Tejun Heo
• Re: regarding ata_msg_*()
  • From: Borislav Petkov
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: zhao, forrest
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: Tejun Heo
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: Tejun Heo
• Re: regarding ata_msg_*()
  • From: Tejun Heo
• Re: regarding ata_msg_*()
  • From: Borislav Petkov
• Re: [PATCH 0/3]ACPI support for SATA/PATA
  • From: Jeff Garzik
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: zhao, forrest
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: Jeff Garzik
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: Tejun Heo
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: zhao, forrest
• Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2
  • From: Tejun Heo