On Monday 26 June 2006 10:57, Tejun Heo wrote: > Tejun Heo wrote: > > Hello, Andi. > > > > Andi Kleen wrote: > >> Still doesn't work with it - see > >> http://one.firstfloor.org/~andi/sata3.jpg > > > > * SATA_IRQ bit is stuck (on all other sil controllers, this gets cleared > > when SError is cleared) > > > > * whenever interrupt occurs (from itself or from any other ones sharing > > the IRQ), irq handler sees SATA_IRQ bit set and thus thinks it just > > received phy status changed IRQ. > > > > * phy status change aborts the active command, so no command gets > > completed. > > > > I'm attaching two patches. The first one tries to clear SATA_IRQ by > > writing 1 to it in thaw() assuming the bit is implemented as W1C (which > > BTW is out of spec). The second one kills SATA_IRQ handling completely. > > I wish the first one works but if not I'll update the second one such > > that it applies only to ATI IXP. > > And another one, just in case they were crazy enough to implement the > bit as RW. patch0 + this one also don't work (zero err_mask etc.) -Andi - : send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
