1 Make ahci_start_engine() and ahci_stop_engine() more consistent with
AHCI spec 1.1
2 Change their input parameter from ap to port_mmio
3 Update the existing users of ahci_start_engine() and ahci_stop_engine
()
Signed-off-by: Forrest Zhao <forrest.zhao@xxxxxxxxx>
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Jens Axboe <axboe@xxxxxxx>
---
drivers/scsi/ahci.c | 82 ++++++++++++++++++++++++++++++++++
+----------------
1 files changed, 57 insertions(+), 25 deletions(-)
2000c3e3e0183ec2b2a62a91dc33bcb928b3edb6
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 77e7202..f1516ca 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -205,6 +205,8 @@ static irqreturn_t ahci_interrupt (int i
static void ahci_irq_clear(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
+static int ahci_start_engine(void __iomem *port_mmio);
+static int ahci_stop_engine(void __iomem *port_mmio);
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
@@ -508,41 +510,64 @@ static void ahci_scr_write (struct ata_p
writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
-static int ahci_stop_engine(struct ata_port *ap)
+static int ahci_stop_engine(void __iomem *port_mmio)
{
- void __iomem *mmio = ap->host_set->mmio_base;
- void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
- int work;
u32 tmp;
tmp = readl(port_mmio + PORT_CMD);
+
+ /* Check if the HBA is idle */
+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+ return 0;
+
+ /* Setting HBA to idle */
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
- /* wait for engine to stop. TODO: this could be
+ /* wait for engine to stop. This could be
* as long as 500 msec
*/
- work = 1000;
- while (work-- > 0) {
- tmp = readl(port_mmio + PORT_CMD);
- if ((tmp & PORT_CMD_LIST_ON) == 0)
- return 0;
- udelay(10);
- }
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+ if(tmp & PORT_CMD_LIST_ON)
+ return -EIO;
- return -EIO;
+ return 0;
}
-static void ahci_start_engine(struct ata_port *ap)
+static int ahci_start_engine(void __iomem *port_mmio)
{
- void __iomem *mmio = ap->host_set->mmio_base;
- void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
u32 tmp;
+ /*
+ * Get current status
+ */
tmp = readl(port_mmio + PORT_CMD);
+
+ /*
+ * AHCI rev 1.1 section 10.3.1:
+ * Software shall not set PxCMD.ST to '1' until it verifies
+ * that PxCMD.CR is '0' and has set PxCMD.FRE to '1'
+ */
+ if ((tmp & PORT_CMD_FIS_RX) == 0)
+ return -EPERM;
+
+ /*
+ * wait for engine to become idle.
+ */
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1,500);
+ if(tmp & PORT_CMD_LIST_ON)
+ return -EBUSY;
+
+ /*
+ * Start DMA
+ */
tmp |= PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
+
+ return 0;
}
static unsigned int ahci_dev_classify(struct ata_port *ap)
@@ -626,7 +651,7 @@ static int ahci_softreset(struct ata_por
}
/* prepare for SRST (AHCI-1.1 10.4.1) */
- rc = ahci_stop_engine(ap);
+ rc = ahci_stop_engine(port_mmio);
if (rc) {
reason = "failed to stop engine";
goto fail_restart;
@@ -647,7 +672,7 @@ static int ahci_softreset(struct ata_por
}
/* restart engine */
- ahci_start_engine(ap);
+ ahci_start_engine(port_mmio);
ata_tf_init(ap->device, &tf);
fis = pp->cmd_tbl;
@@ -706,7 +731,7 @@ static int ahci_softreset(struct ata_por
return 0;
fail_restart:
- ahci_start_engine(ap);
+ ahci_start_engine(port_mmio);
fail:
ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
return rc;
@@ -717,11 +742,13 @@ static int ahci_hardreset(struct ata_por
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
int rc;
DPRINTK("ENTER\n");
- ahci_stop_engine(ap);
+ ahci_stop_engine(port_mmio);
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(ap->device, &tf);
@@ -730,7 +757,7 @@ static int ahci_hardreset(struct ata_por
rc = sata_std_hardreset(ap, class);
- ahci_start_engine(ap);
+ ahci_start_engine(port_mmio);
if (rc == 0 && ata_port_online(ap))
*class = ahci_dev_classify(ap);
@@ -1052,10 +1079,13 @@ static void ahci_thaw(struct ata_port *a
static void ahci_error_handler(struct ata_port *ap)
{
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
- ahci_stop_engine(ap);
- ahci_start_engine(ap);
+ ahci_stop_engine(port_mmio);
+ ahci_start_engine(port_mmio);
}
/* perform recovery */
@@ -1066,14 +1096,16 @@ static void ahci_error_handler(struct at
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
if (qc->flags & ATA_QCFLAG_FAILED)
qc->err_mask |= AC_ERR_OTHER;
if (qc->err_mask) {
/* make DMA engine forget about the failed command */
- ahci_stop_engine(ap);
- ahci_start_engine(ap);
+ ahci_stop_engine(port_mmio);
+ ahci_start_engine(port_mmio);
}
}
--
1.2.6
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
