Re: 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) (retry)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 28 Jun 2006 19:40:54 +0200 Udo van den Heuvel wrote:

> While 2.6.16.2 runs quite OK on my VIA SP8000 Epia system, 2.6.17 gives
> (with the same config where possible) a sata problem on bootup, it gives
> a via_sata timeout(cmd 0xef). (the letters were small to make the stuff
> not scroll off the TV)
> Immediately rebooting into 2.6.16.2 gives a nice clean bootup.

For some reason I suspect that VIA IRQ quirk again...

Can you try to revert these patches from 2.6.17:

http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=a7b862f663d81858531dfccc0537bc9d8a2a4121

http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=75cf7456dd87335f574dcd53c4ae616a2ad71a11

Alternatively, you may try 2.6.16.17 - if it breaks in the same way, and
2.6.16.16 works, this is most likely that VIA IRQ problem (and reverting
the same patches from 2.6.16.17 should fix it).

Attachment: pgp65IqK3xzvM.pgp
Description: PGP signature


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux