Hi Tejun,
> >ata1: command 0xca timeout, stat 0x50 host_stat 0x4
> >ata1: status=0x50 { DriveReady SeekComplete }
> >ata1: command 0xea timeout, stat 0x50 host_stat 0x0
> >ata1: status=0x50 { DriveReady SeekComplete }
>
> The original error is probably a hardware problem.
ok, I will try to get this disc replaced after some testing ...
> >I had hoped 2.6.17 would fix this since I seem to remember some fixes for
> >libata with similar error messages. But at least on my system it did not.
>
> Can you apply the following patch and see what happens?
Patch is installed and system is running:
libata version 1.30 loaded.
sata_via 0000:00:0f.0: version 1.2
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 18
sata_via 0000:00:0f.0: routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xA800 irq 18
ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 18
scsi0 : sata_via
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/133
scsi1 : sata_via
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
I will monitor this for a some time. And thanks for the quick response!
Jochen
--
Well, yeah ... I suppose there's no point in getting greedy, is there?
<< Calvin & Hobbes >>
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
