On Wed, Jun 28, 2006 at 10:09:12AM +0200, Jochen Heuer wrote:
[...]
> Patch is installed and system is running:
>
> libata version 1.30 loaded.
> sata_via 0000:00:0f.0: version 1.2
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 18
> sata_via 0000:00:0f.0: routed to hard irq line 10
> ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xA800 irq 18
> ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 18
> scsi0 : sata_via
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> ata1.00: configured for UDMA/133
> scsi1 : sata_via
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> ata2.00: configured for UDMA/133
> Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: ST3200822AS Rev: 3.01
> Type: Direct-Access ANSI SCSI revision: 05
>
> I will monitor this for a some time. And thanks for the quick response!
Hi Tejun,
the system did hang again twice even with the new libata driver but I am not
sure if this really has something to do without. Somehow I am starting to
believe that the problem is somehow IRQ related. Today the network card (skge
driver) did not respond anymore (NETDEV WATCHDOG: eth0: transmit timed out) and
the interrupts did not count up anymore (even though the card still had a
link). Furthermore I remembered some problems with USB mouse and keyboard not
working properly anymore and logged in from remote I saw that interrupts were
also not increasing ... Are there any known issues in this area with SMP
kernels?
Best regards,
Jochen
--
Well, yeah ... I suppose there's no point in getting greedy, is there?
<< Calvin & Hobbes >>
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
