Resend #2 changes include:
- use 'void __iomem *' for ioremap() return values,
and handle error cases.
sgiioc4.c had been recently converted to using mmio ops.
There are still a few issues to cleanup.
Signed-off-by: jpk@xxxxxxx
Index: linux-2.6/drivers/ide/pci/sgiioc4.c
===================================================================
--- linux-2.6.orig/drivers/ide/pci/sgiioc4.c 2006-07-17 08:53:58.107664466 -0500
+++ linux-2.6/drivers/ide/pci/sgiioc4.c 2006-07-17 09:03:40.402118344 -0500
@@ -367,12 +367,13 @@ sgiioc4_INB(unsigned long port)
static void __devinit
ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
{
+ void __iomem *virt_dma_base;
int num_ports = sizeof (ioc4_dma_regs_t);
printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
dma_base, dma_base + num_ports - 1);
- if (!request_region(dma_base, num_ports, hwif->name)) {
+ if (!request_mem_region(dma_base, num_ports, hwif->name)) {
printk(KERN_ERR
"%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
"ALREADY in use\n",
@@ -381,13 +382,21 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsig
goto dma_alloc_failure;
}
- hwif->dma_base = dma_base;
+ virt_dma_base = ioremap(dma_base, num_ports);
+ if (virt_dma_base == NULL) {
+ printk(KERN_ERR
+ "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
+ __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
+ goto dma_remap_failure;
+ }
+ hwif->dma_base = (unsigned long) virt_dma_base;
+
hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
&hwif->dmatable_dma);
if (!hwif->dmatable_cpu)
- goto dma_alloc_failure;
+ goto dma_remap_failure;
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
@@ -411,6 +420,9 @@ dma_base2alloc_failure:
printk(KERN_INFO
"Changing from DMA to PIO mode for Drive %s\n", hwif->name);
+dma_remap_failure:
+ release_mem_region(dma_base, num_ports);
+
dma_alloc_failure:
/* Disable DMA because we couldnot allocate any DMA maps */
hwif->autodma = 0;
@@ -607,18 +619,15 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
- /*
- * The IOC4 uses MMIO rather than Port IO.
- * It also needs special workarounds for INB.
- */
- default_hwif_mmiops(hwif);
hwif->INB = &sgiioc4_INB;
}
static int __devinit
sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
{
- unsigned long base, ctl, dma_base, irqport;
+ unsigned long cmd_base, dma_base, irqport;
+ unsigned long bar0, cmd_phys_base, ctl;
+ void __iomem *virt_base;
ide_hwif_t *hwif;
int h;
@@ -636,23 +645,32 @@ sgiioc4_ide_setup_pci_device(struct pci_
}
/* Get the CmdBlk and CtrlBlk Base Registers */
- base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
- ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
- irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
+ bar0 = pci_resource_start(dev, 0);
+ virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+ if (virt_base == NULL) {
+ printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
+ d->name, bar0);
+ return -ENOMEM;
+ }
+ cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
+ ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
+ irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
- if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
+ cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
+ if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+ hwif->name)) {
printk(KERN_ERR
- "%s : %s -- ERROR, Port Addresses "
+ "%s : %s -- ERROR, Addresses "
"0x%p to 0x%p ALREADY in use\n",
- __FUNCTION__, hwif->name, (void *) base,
- (void *) base + IOC4_CMD_CTL_BLK_SIZE);
+ __FUNCTION__, hwif->name, (void *) cmd_phys_base,
+ (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
return -ENOMEM;
}
- if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
+ if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
/* Initialize the IO registers */
- sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
+ sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport);
memcpy(hwif->io_ports, hwif->hw.io_ports,
sizeof (hwif->io_ports));
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
@@ -665,6 +683,9 @@ sgiioc4_ide_setup_pci_device(struct pci_
hwif->cds = (struct ide_pci_device_s *) d;
hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
+ /* The IOC4 uses MMIO rather than Port IO. */
+ default_hwif_mmiops(hwif);
+
/* Initializing chipset IRQ Registers */
hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
