In preparation for SAS attached SATA devices, which will
not have a libata scsi_host, only setup host->max_cmd_len
if ap->host exists.
Signed-off-by: Brian King <brking@xxxxxxxxxx>
---
libata-dev-bjking1/drivers/scsi/libata-core.c | 21 +++++++++++++++------
1 files changed, 15 insertions(+), 6 deletions(-)
diff -puN drivers/scsi/libata-core.c~libata_cdb_len drivers/scsi/libata-core.c
--- libata-dev/drivers/scsi/libata-core.c~libata_cdb_len 2006-06-27 16:01:47.000000000 -0500
+++ libata-dev-bjking1/drivers/scsi/libata-core.c 2006-06-27 16:01:47.000000000 -0500
@@ -1326,6 +1326,19 @@ static void ata_dev_config_ncq(struct at
snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
}
+static void ata_set_port_max_cmd_len(struct ata_port *ap)
+{
+ int i;
+
+ if (ap->host) {
+ ap->host->max_cmd_len = 0;
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ ap->host->max_cmd_len = max_t(unsigned int,
+ ap->host->max_cmd_len,
+ ap->device[i].cdb_len);
+ }
+}
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -1345,7 +1358,7 @@ int ata_dev_configure(struct ata_device
struct ata_port *ap = dev->ap;
const u16 *id = dev->id;
unsigned int xfer_mask;
- int i, rc;
+ int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
ata_dev_printk(dev, KERN_INFO,
@@ -1475,11 +1488,7 @@ int ata_dev_configure(struct ata_device
cdb_intr_string);
}
- ap->host->max_cmd_len = 0;
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- ap->host->max_cmd_len = max_t(unsigned int,
- ap->host->max_cmd_len,
- ap->device[i].cdb_len);
+ ata_set_port_max_cmd_len(ap);
/* limit bridge transfers to udma5, 200 sectors */
if (ata_dev_knobble(dev)) {
_
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
