I am trying to get sata_sil running on a MPC8349(PPC) board, I runto
the following errors. I cannot upgrade my kernel to the latest one
since most of my changes for MPC8349 to work are for 2.6.11.
1) How can i patch the latest release of libata for 2.6.11 without
having to change to 2.6.17
2) I have tried SIL 3112 card with the same results
3) I have also tried different hard drives like samsung and WDC
Please let me know what i can do to get this running.
~harsha
-----------------Kernel 2.6.11 dmesg
dump--------------------------------------------------
PCI: Probing PCI hardware
PCI:0000:00:10.0: Resource 0: 00fffff8-00ffffff (f=101)
PCI:0000:00:10.0: Resource 1: 00fffff4-00fffff7 (f=101)
PCI:0000:00:10.0: Resource 2: 00ffffe8-00ffffef (f=101)
PCI:0000:00:10.0: Resource 3: 00ffffe4-00ffffe7 (f=101)
PCI:0000:00:10.0: Resource 4: 00ffffd0-00ffffdf (f=101)
PCI:0000:00:10.0: Resource 5: 9ffffe00-9fffffff (f=200)
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus]
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing
disabled
ttyS0 at MMIO 0x0 (irq = 9) is a 16450
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
loop: loaded (max 8 devices)
ath_pci: 0.9.4.5 (svn r1692)
ATH_PCI: intializing the ath_pci
ATH_PCI: after pci_register_driver
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413, REGOPS_FUNC)
wlan: 0.8.4.2 (svn r1692)
wlan: mac acl policy registered
ath_rate_onoe: 1.0 (svn r1692)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ata_device_add: ENTER
ata_host_add: ENTER
ata_port_start: prd alloc, virt c372b000, dma 372b000
ata1: SATA max UDMA/100 cmd 0xC5000E80 ctl 0xC5000E8A bmdma
0xC5000E00 irq 22
ata_host_add: ENTER
ata_port_start: prd alloc, virt c372e000, dma 372e000
ata2: SATA max UDMA/100 cmd 0xC5000EC0 ctl 0xC5000ECA bmdma
0xC5000E08 irq 22
ata_device_add: probe begin
ata_device_add: ata1: probe begin
ata1: no device found (phy stat 00000000)
ata_device_add: ata1: probe end
scsi0 : sata_sil
ata_device_add: ata2: probe begin
ata_bus_reset: ENTER, host 2, port 1
ata_bus_edd: execute-device-diag
ata_exec: ata2: cmd 0x90
ata_exec_command_mmio: ata2: cmd 0x90
ata_dev_classify: found ATA device by sig
ata_bus_reset: EXIT
ata_dev_identify: ENTER, host 2, dev 0
ata_dev_select: ENTER, ata2: device 0, wait 1
ata_dev_identify: do ATA identify
ata_dev_select: ENTER, ata2: device 0, wait 1
ata_exec_command_mmio: ata2: cmd 0xEC
ata_pio_sector: data read
ata_qc_complete: EXIT
ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x001f
ata_dump_id: 80==0x00fe 81==0x0000 82==0x346b 83==0x7d01 84==0x4023
ata_dump_id: 88==0x207f 93==0x0000
ata2: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata_dev_identify: EXIT, drv_stat = 0x50
ata2(0): applying Seagate errata fix
ata_dev_identify: ENTER/EXIT (host 2, dev 1) -- nodev
ata_host_set_pio: base 0x8 xfer_mode 0xc mask 0x1f x 4
ata_dev_set_xfermode: set features - xfer mode
ata_dev_select: ENTER, ata2: device 0, wait 1
ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0
ata_tf_load_mmio: feat 0x3 nsect 0x45 lba 0x0 0x0 0x0
ata_tf_load_mmio: device 0xA0
ata_exec_command_mmio: ata2: cmd 0xEF
ata_host_intr: ata2: protocol 1 (dev_stat 0x50)
ata_qc_complete: EXIT
ata_dev_set_xfermode: EXIT
ata_dev_set_mode: idx=5 xfer_shift=0, xfer_mode=0x45, base=0x40,
offset=5
ata2: dev 0 configured for UDMA/100
ata_device_add: ata2: probe end
scsi1 : sata_sil
ata_device_add: probe begin
ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,1,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,2,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,3,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,4,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,5,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,6,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,7,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,8,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,9,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,10,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,11,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,12,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,13,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,14,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:0,15,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,0,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,1,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,2,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,3,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,4,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,5,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,6,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,7,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,8,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,9,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,10,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,11,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,12,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,13,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,14,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (1:1,15,0) 12 00 00 00 24 00 c9 58 00
ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 24 00 c9 58 00
ata_scsiop_inq_std: ENTER
ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 60 00 c9 58 00
ata_scsiop_inq_std: ENTER
Vendor: ATA Model: ST3802110AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
ata_scsi_dump_cdb: CDB (2:0,0,0) a0 00 00 00 00 00 00 00 10
ata_scsiop_report_luns: ENTER
ata_scsi_dump_cdb: CDB (2:0,1,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,2,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,3,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,4,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,5,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,6,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,7,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,8,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,9,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,10,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,11,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,12,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,13,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,14,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:0,15,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,0,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,1,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,2,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,3,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,4,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,5,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,6,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,7,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,8,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,9,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,10,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,11,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,12,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,13,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,14,0) 12 00 00 00 24 00 10 00 c3
ata_scsi_dump_cdb: CDB (2:1,15,0) 12 00 00 00 24 00 10 00 c3
ata_device_add: EXIT, returning 2
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
ata_scsiop_noop: ENTER
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_scsiop_read_cap: ENTER
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_scsiop_mode_sense: ENTER
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_scsiop_mode_sense: ENTER
SCSI device sda: drive cache: write back
ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
ata_scsiop_noop: ENTER
ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00
ata_scsiop_read_cap: ENTER
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08
ata_scsiop_mode_sense: ENTER
ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c
ata_scsiop_mode_sense: ENTER
SCSI device sda: drive cache: write back
sda:<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 08
ata_scsi_translate: ENTER
ata_scsi_rw_xlat: ten-byte command
ata_sg_setup: ENTER, ata2
ata_sg_setup: 1 sg elements mapped
ata_fill_sg: PRD[0] = (0x3748000, 0x1000)
ata_dev_select: ENTER, ata2: device 0, wait 1
ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0
ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0
ata_tf_load_mmio: device 0xE0
ata_exec_command_mmio: ata2: cmd 0x25
ata_scsi_translate: EXIT
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata2: command 0x25 timeout, stat 0x58 host_stat 0x2
ata_sg_clean: unmapping 1 sg elements
ata2: status=0x58 { DriveReady SeekComplete DataRequest }
SCSI error : <1 0 0 0> return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata_qc_complete: EXIT
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 08
ata_scsi_translate: ENTER
ata_scsi_rw_xlat: ten-byte command
ata_sg_setup: ENTER, ata2
ata_sg_setup: 1 sg elements mapped
ata_fill_sg: PRD[0] = (0x3748000, 0x1000)
ata_dev_select: ENTER, ata2: device 0, wait 1
ATA: abnormal status 0x58 on port 0xC5000EC7
ATA: abnormal status 0x58 on port 0xC5000EC7
ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0
ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0
ata_tf_load_mmio: device 0xE0
ATA: abnormal status 0x58 on port 0xC5000EC7
ata_exec_command_mmio: ata2: cmd 0x25
ata_scsi_translate: EXIT
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata2: command 0x25 timeout, stat 0x58 host_stat 0x2
ata_sg_clean: unmapping 1 sg elements
ata2: status=0x58 { DriveReady SeekComplete DataRequest }
SCSI error : <1 0 0 0> return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata_qc_complete: EXIT
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
ldm_validate_partition_table(): Disk read failed.
ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 08
ata_scsi_translate: ENTER
ata_scsi_rw_xlat: ten-byte command
ata_sg_setup: ENTER, ata2
ata_sg_setup: 1 sg elements mapped
ata_fill_sg: PRD[0] = (0x3748000, 0x1000)
ata_dev_select: ENTER, ata2: device 0, wait 1
ATA: abnormal status 0x58 on port 0xC5000EC7
ATA: abnormal status 0x58 on port 0xC5000EC7
ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0
ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0
ata_tf_load_mmio: device 0xE0
ATA: abnormal status 0x58 on port 0xC5000EC7
ata_exec_command_mmio: ata2: cmd 0x25
ata_scsi_translate: EXIT
ata_scsi_error: ENTER
ata_eng_timeout: ENTER
ata_qc_timeout: ENTER
ata2: command 0x25 timeout, stat 0x58 host_stat 0x2
ata_sg_clean: unmapping 1 sg elements
ata2: status=0x58 { DriveReady SeekComplete DataRequest }
SCSI error : <1 0 0 0> return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
unable to read partition table
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
ata_qc_complete: EXIT
ata_qc_timeout: EXIT
ata_eng_timeout: EXIT
ata_scsi_error: EXIT
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: faulty personality registered as nr 10
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
