Hi,
Libata in 2.6.18-rc4-mm1 doesn't recognize my DVD-ROM drive, which is an
ATAPI TORiSAN DVD-ROM DRD-N216. It's interesting that dmesg initially
says "ata2: PATA max UDMA/33ata2: PATA max UDMA/33" even though the
drive is only capable of Multiword DMA Mode 2 and PIO Mode 4 according
to its specs (
http://support.dell.com/support/edocs/storage/tormargi/Specs.htm ).
Nevertheless, libata seems to find the correct mode later on: "ata2.00:
ATAPI, max MWDMA2, CDB intr".
I've included the libata-related dmesg lines below. The full dmesg can
be found at
http://bugzilla.kernel.org/attachment.cgi?id=8806
I'd be happy to provide any other information that may be helpful in
debugging the problem.
Thank you,
-Vlad
SCSI subsystem initialized
libata version 2.00 loaded.
ata_piix 0000:00:07.1: version 2.00ac6
ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xFCF0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xFCF8 irq 15
scsi0 : ata_piix
ata1.00: ATA-4, max UDMA/33, 12685680 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/33
scsi1 : ata_piix
ata2.00: ATAPI, max MWDMA2, CDB intr
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct access ATA IBM-DADA-26480 AD6O PQ: 0 ANSI: 5
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x4)
ata2.00: tag 0 cmd 0xa0 Emask 0x2 stat 0x58 err 0x0 (HSM violation)
ata2: soft resetting port
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ata2: soft resetting port
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
SCSI device sda: 12685680 512-byte hdwr sectors (6495 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 12685680 512-byte hdwr sectors (6495 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ata2: soft resetting port
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ATA: abnormal status 0xD8 on port 0x177
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2.00: disabled
ata2: EH complete
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
