Linux IDE Archive

• Thread Index

• [PATCH 23/40] ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/40] ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/40] ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/40] ide-floppy: merge callbacks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/40] ide-tape: make pc->idetape_callback void
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/40] ide-tape: merge callbacks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/40] ide-tape: make idetape_retry_pc() void
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/40] ide-{floppy,tape,scsi}: log device name instead of driver name
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/40] ide-tape: remove SIMULATE_ERRORS debug code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/40] ide-tape: remove stale comments from idetape_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/40] ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/40] ide-tape: remove superfluous warning message from idetape_issue_pc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/40] ide-tape: remove superfluous error message from idetape_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/40] ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/40] ide-scsi: add debug_log() macro
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/40] ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/40] ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/40] ide-scsi: fix handling of DMA errors in idescsi_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/40] ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/40] ide-scsi: fix race in idescsi_transfer_pc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/40] ide: generic ATAPI support
  • From: Bartlomiej Zolnierkiewicz
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: Bartlomiej Zolnierkiewicz
• Re: PROBLEM: Error messages on resume from memory/disk.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• [PATCH 10/10] libata: ignore SIMG4726 config pseudo device
  • From: Tejun Heo
• [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached
  • From: Tejun Heo
• [PATCH 05/10] libata: ignore recovered PHY errors
  • From: Tejun Heo
• [PATCH 07/10] libata: make sure PMP notification is turned off during recovery
  • From: Tejun Heo
• [PATCH 06/10] libata: increase PMP register access timeout to 3s
  • From: Tejun Heo
• [PATCH 08/10] libata: don't schedule LPM action seperately during probing
  • From: Tejun Heo
• [PATCH 04/10] libata: kill hotplug related race condition
  • From: Tejun Heo
• [PATCHSET #upstream-fixes] libata: fix a bunch of PMP related problems
  • From: Tejun Heo
• [PATCH 03/10] libata: move reset freeze/thaw handling into ata_eh_reset()
  • From: Tejun Heo
• [PATCH 02/10] libata: reorganize ata_eh_reset() no reset method path
  • From: Tejun Heo
• [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling
  • From: Tejun Heo
• Re: Unable to access drives via PortMultiplier and SATA/IDE bridge
  • From: Tejun Heo
• Re: libata sata_via unusual behaviour
  • From: Paolo
• Re: Port Multiplier drives not always all found on cold plug
  • From: Tejun Heo
• Re: [Bugme-new] [Bug 10738] New: sata_via hang and data corruption
  • From: Andrew Morton
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: TAKADA Yoshihito
• Re: libata sata_via unusual behaviour
  • From: Alan Cox
• Re: Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• RE: Unable to access drives via PortMultiplier and SATA/IDE bridge
  • From: Brian & Chamaigne Scamman
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• PROBLEM: Error messages on resume from memory/disk.
  • From: Andrei Gusev
• Re: Port Multiplier drives not always all found on cold plug
  • From: Tejun Heo
• Re: [PATCH 05/09] sata_mv don't blindly enable IRQs
  • From: Jeff Garzik
• Re: [PATCH 05/09] sata_mv don't blindly enable IRQs
  • From: Mark Lord
• Re: [PATCH 05/09] sata_mv don't blindly enable IRQs
  • From: Jeff Garzik
• [PATCH 09/09] sata_mv cache main_irq_mask register in hpriv
  • From: Mark Lord
• [PATCH 08/09] sata_mv disregard masked irqs
  • From: Mark Lord
• [PATCH 07/09] sata_mv fix pmp drives not found
  • From: Mark Lord
• [PATCH 06/09] sata_mv consolidate main_irq_mask updates
  • From: Mark Lord
• [PATCH 05/09] sata_mv don't blindly enable IRQs
  • From: Mark Lord
• Re: Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• [PATCH 2.6.26-rc2 3/3] sata_promise: other cleanups
  • From: Mikael Pettersson
• [PATCH 2.6.26-rc2 2/3] sata_promise: mmio access cleanups
  • From: Mikael Pettersson
• [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Mikael Pettersson
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• Re: Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Peter Favrholdt
• Re: libata sata_via unusual behaviour
  • From: Paolo
• Re: Port Multiplier drives not always all found on cold plug
  • From: Tejun Heo
• Re: libata sata_via unusual behaviour
  • From: Paolo
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• Re: Oops: 0000 [#1] SMP //// HPT raid card 1740
  • From: devzero
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/2] ide: ide_do_drive_cmd cleanups
  • From: Bartlomiej Zolnierkiewicz
• HPA Problem in libata-core.c?
  • From: Richard Bland
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• Re: Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• Re: Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• Re: Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• Re: Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• Port Multiplier drives not always all found on cold plug
  • From: Mark Lord
• [Bug 10715] New: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: bugme-daemon
• patch libata-force-hardreset-if-link-is-in-powersave-mode.patch added to 2.6.25-stable tree
  • From: gregkh
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: Pavel Machek
• Re: Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Alan Cox
• libata: force hardreset if link is in powersave mode
  • From: Tejun Heo
• Re: ata_piix 2.6.25 sata failure
  • From: Matthieu CASTET
• Re: [PATCH 01/12] lib: create common ascii hex array
  • From: Ralf Baechle
• Re: ata_piix 2.6.25 sata failure
  • From: Tejun Heo
• Re: ata_piix 2.6.25 sata failure
  • From: Matthieu CASTET
• Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tvrtko A. Ursulin
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Bruce Allen
• Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tejun Heo
• [PATCH 1/2] ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait
  • From: FUJITA Tomonori
• [PATCH 2/2] ide: remove action argument in ide_do_drive_cmd
  • From: FUJITA Tomonori
• [PATCH 0/2] ide: ide_do_drive_cmd cleanups
  • From: FUJITA Tomonori
• [patch 1/1] ata: remove FIT() macro
  • From: akpm
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/12] ide: use the common ascii hex helpers
  • From: Andrew Morton
• Re: [PATCH 03/12] ide: use the common ascii hex helpers
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_sx4 vs. Promise SX4060
  • From: Lasse Makholm
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: Bartlomiej Zolnierkiewicz
• Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Jim Paris
• Re: [PATCH] LBA28/LBA48 off-by-one bug in ata.h
  • From: Taisuke Yamada
• confusion about libata.force=80c
  • From: Tom Sylla
• Re: Macbook Pro SATA Drives not seen in 2.6.25
  • From: Andrew Morton
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• [PATCH 04/04] sata_mv async notify for genIIe only
  • From: Mark Lord
• [PATCH 03/04] sata_mv group genIIe flags
  • From: Mark Lord
• [PATCH 02/04] sata_mv fis irq register fixes
  • From: Mark Lord
• [PATCH 01/04] sata_mv always do softreset
  • From: Mark Lord
• SOLVED: Macbook Pro SATA Drives not seen in 2.6.25
  • From: AndrewL733
• Re: Port-Multiplier hotplug support: ATA_FLAG_AN
  • From: Mark Lord
• Re: Macbook Pro SATA Drives not seen in 2.6.25
  • From: AndrewL733
• Re: [PATCH 01/12] lib: create common ascii hex array
  • From: David Howells
• Re: [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tejun Heo
• Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Erik Inge Bolsø
• Re: Macbook Pro SATA Drives not seen in 2.6.25
  • From: Andrew Morton
• [RESOLVED] Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tvrtko A. Ursulin
• Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tejun Heo
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Martin Michlmayr
• Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tvrtko A. Ursulin
• Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tejun Heo
• Re: Port-Multiplier hotplug support: ATA_FLAG_AN
  • From: Tejun Heo
• Re: Port-Multiplier hotplug support: ATA_FLAG_AN
  • From: Mark Lord
• Re: Port-Multiplier hotplug support: ATA_FLAG_AN
  • From: Jeff Garzik
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Mark Lord
• Port-Multiplier hotplug support: ATA_FLAG_AN
  • From: Mark Lord
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Mark Lord
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Mark Lord
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Mark Lord
• Re: libata NCQ implementation questions
  • From: Mark Lord
• [patch 21/37] ata_piix: verify SIDPR access before enabling it
  • From: Greg KH
• SATA hotplug in 2.6.17-2?
  • From: Owen B. Mehegan
• Re: [PATCH] LBA28/LBA48 off-by-one bug in ata.h
  • From: Greg Freemyer
• patch ata_piix-verify-sidpr-access-before-enabling-it.patch added to 2.6.25-stable tree
  • From: gregkh
• Re: Compact Flash Question
  • From: Yigal Sadgat
• Re: [PATCH 01/12] lib: create common ascii hex array
  • From: Harvey Harrison
• Re: [PATCH 01/12] lib: create common ascii hex array
  • From: Ilpo Järvinen
• Re: libata NCQ implementation questions
  • From: Mikael Pettersson
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Tejun Heo
• Re: libata NCQ implementation questions
  • From: Tejun Heo
• Re: libata NCQ implementation questions
  • From: Tejun Heo
• ata_piix 2.6.25 sata failure
  • From: Matthieu CASTET
• [PATCH -stable] ata_piix: verify SIDPR access before enabling it
  • From: Tejun Heo
• Re: [PATCH 01/12] lib: create common ascii hex array
  • From: Paul Mundt
• Re: libata NCQ implementation questions
  • From: Mikael Pettersson
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Martin Michlmayr
• [PATCH 03/12] ide: use the common ascii hex helpers
  • From: Harvey Harrison
• [PATCH 01/12] lib: create common ascii hex array
  • From: Harvey Harrison
• Re: libata NCQ implementation questions
  • From: Mark Lord
• Re: sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Mark Lord
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Martin Michlmayr
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Mark Lord
• Re: 2.6.24.*/2.6.25.*: attempt to access beyond end of device
  • From: Peter Klotz
• sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier
  • From: Martin Michlmayr
• sata_mv on Orion: mv_err_intr when shutting down
  • From: Martin Michlmayr
• Re: libata NCQ implementation questions
  • From: Mikael Pettersson
• Re: 2.6.24.*/2.6.25.*: attempt to access beyond end of device
  • From: Gene Heskett
• Re: 2.6.24.*/2.6.25.*: attempt to access beyond end of device
  • From: Alan Cox
• Re: [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.
  • From: Alan Cox
• 2.6.24.*/2.6.25.*: attempt to access beyond end of device
  • From: Peter Klotz
• [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.
  • From: Bryan Wu
• Re: libata NCQ implementation questions
  • From: Grant Grundler
• Re: sata_promise.c:pdc_irq_clear() buglet?
  • From: Mikael Pettersson
• libata NCQ implementation questions
  • From: Mikael Pettersson
• Re: sata_promise.c:pdc_irq_clear() buglet?
  • From: Jeff Garzik
• sata_promise.c:pdc_irq_clear() buglet?
  • From: Mikael Pettersson
• [git patch] libata no-works fix (RESEND)
  • From: Jeff Garzik
• Re: libata: improve post-reset device ready test
  • From: Jeff Garzik
• Re: libata: improve post-reset device ready test
  • From: Alexey Dobriyan
• Re: How to mount a CD created on Vista?
  • From: Lasse Makholm
• Re: How to mount a CD created on Vista?
  • From: Lasse Makholm
• How to mount a CD created on Vista?
  • From: James Courtier-Dutton
• Re: [PATCH 1/6] sgiioc4: use ->extra_base instead of ->dma_status for dma_handle
  • From: Jeremy Higdon
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Tejun Heo
• [git patch] libata fix
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Lennart Sorensen
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Matthew Garrett
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Lennart Sorensen
• Port control interface (was Re: [PATCH] ata: ahci: power off unused ports)
  • From: Jeff Garzik
• Re: sata_sx4 vs. Promise SX4060
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Mark Lord
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Mark Lord
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: TAKADA Yoshihito
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Marc Dionne
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Alexey Fisher
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Jeff Garzik
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Justin Mattock
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Justin Mattock
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Tejun Heo
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Tejun Heo
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: TAKADA Yoshihito
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] AHCI: add Dell PowerEdge SC430 pci id
  • From: maximilian attems
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Matthew Garrett
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Matthew Garrett
• Re: [PATCH] AHCI: add Dell PowerEdge SC430 pci id
  • From: Matthew Garrett
• Re: The never enfind DRDY saga
  • From: J.A. Magallón
• Re: The never enfind DRDY saga
  • From: Jeff Garzik
• [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• The never enfind DRDY saga
  • From: J.A. Magallón
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Marc Dionne
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: J.A. Magallón
• Re: [PATCH 4/6] ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/6] ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag
  • From: Russell King
• [PATCH 3/5] alim15x3: add "wdc_udma" module parameter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/5] ide/Kconfig: couple of fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/5] alim15x3: remove WDC_ALI15X3 config option
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/5] alim15x3: remove stale warning about ATI RS100 northbridge
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] alim15x3: trivial cleanup for ali_set_pio_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] AHCI: add Dell PowerEdge SC430 pci id
  • From: maximilian attems
• sata_sx4 vs. Promise SX4060
  • From: Lasse Makholm
• [PATCH 4/4] ide: remove drive->ctl
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ide: use ->OUTBSYNC in ide_set_irq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ide: use ->OUTBSYNC in init_irq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Hugh Dickins
• Re: 2.6.26-git: ata_piix link is slow to respond regression.
  • From: Sitsofe Wheeler
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Alexey Fisher
• 2.6.26-git: ata_piix link is slow to respond regression.
  • From: Soeren Sonnenburg
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Markus Trippelsdorf
• Re: [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Takashi Iwai
• [PATCH] Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Jeff Garzik
• Re: Compact Flash Question
  • From: Willy Tarreau
• Re: Compact Flash Question
  • From: Lennart Sorensen
• Re: Compact Flash Question
  • From: Mark Lord
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Jan-Simon Möller
• Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Marc Dionne
• Re: Suspend to memory is freezing my machine
  • From: Jacek Luczak
• [PATCH 6/6] ide: remove ->mmio flag from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/6] ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/6] ide: move IRQ unmasking out from ->tf_load method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/6] ide: fix do_probe() to use SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/6] ide: remove commented out code from ide_config_drive_speed()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/6] sgiioc4: use ->extra_base instead of ->dma_status for dma_handle
  • From: Bartlomiej Zolnierkiewicz
• Re: again: [PATCH] libata: Add Intel SCH PATA Support
  • From: Bartlomiej Zolnierkiewicz
• Re: Compact Flash Question
  • From: Bart Van Assche
• Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Takashi Iwai
• Re: sata_mv errata function
  • From: Grant Grundler
• Re: Compact Flash Question
  • From: Stéphane ANCELOT
• Re: [git patches] libata updates - (improve post-reset device ready test) regression
  • From: Markus Trippelsdorf
• Re: Compact Flash Question
  • From: Helge Hafting
• Re: Compact Flash Question
  • From: Bart Van Assche
• Re: Compact Flash Question
  • From: Tomasz Chmielewski
• Re: Compact Flash Question
  • From: Alan Cox
• Re: Compact Flash Question
  • From: Tomasz Chmielewski
• Re: sata silliness on the Vaio
  • From: Johan van den Berg
• Re: Compact Flash Question
  • From: Bart Van Assche
• Re: sata silliness on the Vaio
  • From: Andrew Morton
• sata silliness on the Vaio
  • From: Andrew Morton
• Re: again: [PATCH] libata: Add Intel SCH PATA Support
  • From: Alek Du
• [patch] LED support for AHCI driver
  • From: Kristen Carlson Accardi
• Re: Compact Flash Question
  • From: linux-os (Dick Johnson)
• Re: Compact Flash Question
  • From: Alan Cox
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Compact Flash Question
  • From: Yigal Sadgat
• Update on HAVE_PATA_PLATFORM patches
  • From: Ben Dooks
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: [PATCH 01/12] sata_mv more cosmetic changes
  • From: Mark Lord
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: [git patches] libata updates
  • From: Linus Torvalds
• Re: again: [PATCH] libata: Add Intel SCH PATA Support
  • From: Alan Cox
• Re: [2,6 patch] make ide-iops.c:SELECT_MASK() static
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] SWARM IDE: Fix up following changes to ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• Re: again: [PATCH] libata: Add Intel SCH PATA Support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] m68k: Fix falconide `data_adr' typo
  • From: Bartlomiej Zolnierkiewicz
• [git patches] libata updates
  • From: Jeff Garzik
• Re: request for SiS SATA hard disk controller 966 rev. 1183 windows driver
  • From: Uwe Koziolek
• Re: again: [PATCH] libata: Add Intel SCH PATA Support
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ata_piix: verify SIDPR access before enabling it
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: improve post-reset device ready test
  • From: Jeff Garzik
• Re: [PATCH 01/12] sata_mv more cosmetic changes
  • From: Jeff Garzik
• Re: [PATCH 01/12] sata_mv more cosmetic changes
  • From: Jeff Garzik
• Re: [patch 1/1] pata_atiixp: Don't disable
  • From: Jeff Garzik
• Re: [PATCH 01/10] sata_inic162x: misc clean ups
  • From: Jeff Garzik
• again: [PATCH] libata: Add Intel SCH PATA Support
  • From: Alek Du
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Jeff Garzik
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Jeff Garzik
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Alan Cox
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Sergei Shtylyov
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: ata-piix booting woes
  • From: Chris Smith
• AIT Tape/SATA problems
  • From: Russell Brown
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Tejun Heo
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Tejun Heo
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: 2.6.25 semantic change in bay handling?
  • From: Holger Macht
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• ata-piix booting woes
  • From: Johan van den Berg
• .config changes affecting Intel 82801GBM/GHM ICH7 SATA IDE
  • From: Chris Smith
• [PATCH] libata: Add Intel SCH PATA Support
  • From: Alek Du
• Re: Initio 162x SATA controllers
  • From: Johan van den Berg
• [PATCH] SWARM IDE: Fix up following changes to ide_hwif_t
  • From: Maciej W. Rozycki
• 2.6.25 semantic change in bay handling?
  • From: Matthew Garrett
• Re: Initio 162x SATA controllers
  • From: Alan Cox
• request for SiS SATA hard disk controller 966 rev. 1183 windows driver
  • From: Guglielmo Fanini
• [PATCH] m68k: Fix falconide `data_adr' typo
  • From: Geert Uytterhoeven
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Jens Axboe
• Re: Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Mike Hokenson
• [2,6 patch] make ide-iops.c:SELECT_MASK() static
  • From: Adrian Bunk
• Initio 162x SATA controllers
  • From: Johan van den Berg
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Sergei Shtylyov
• Re: Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Jeff Garzik
• Re: [PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd()
  • From: FUJITA Tomonori
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Sergei Shtylyov
• Re: Switching ICH7 to AHCI mode?
  • From: Florian Echtler
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Mike Hokenson
• Re: Switching ICH7 to ACPI mode?
  • From: Andre Tomt
• Re: Suspend to memory is freezing my machine
  • From: Robert Hancock
• Switching ICH7 to ACPI mode?
  • From: Florian Echtler
• Re: Suspend to memory is freezing my machine
  • From: Jacek Luczak
• Re: Suspend to memory is freezing my machine
  • From: Jacek Luczak
• Re: [PATCH] LBA28/LBA48 off-by-one bug in ata.h
  • From: Greg Freemyer
• Re: Suspend to memory is freezing my machine
  • From: Robert Hancock
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: IDE_HFLAG_SERIALIZE_DMA bugfix
  • From: Bartlomiej Zolnierkiewicz
• Re: Asus DRW-2014L1T SATA DVD drive and sata_via
  • From: Jeff Garzik
• [PATCH] ide: remove try_to_flush_leftover_data()
  • From: Bartlomiej Zolnierkiewicz
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Robert Hancock
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Alan Cox
• Asus DRW-2014L1T SATA DVD drive and sata_via
  • From: Bruce Hill, Jr.
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] ide: use __generic_unplug_device() in ide_do_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/8] ide: use get_unaligned_* helpers
  • From: Bartlomiej Zolnierkiewicz
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Matthew Garrett
• [PATCH] LBA28/LBA48 off-by-one bug in ata.h
  • From: Taisuke Yamada
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• [patch 1/1] pata_atiixp: Don't disable
  • From: akpm
• Re: [patch 3/3] pata_atiixp: Don't disable
  • From: Alan Cox
• Re: [patch 2/3] pata_atiixp: simplex clear
  • From: Alan Cox
• [patch 3/3] pata_atiixp: Don't disable
  • From: akpm
• [patch 1/3] ata: remove FIT() macro
  • From: akpm
• [patch 2/3] pata_atiixp: simplex clear
  • From: akpm
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Mark Lord
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Grant Grundler
• Re: [PATCH 13/13] sata_mv use hweight16() for bit counting (V2)
  • From: Grant Grundler
• Re: [PATCH 02/12] sata_mv pci features
  • From: Grant Grundler
• [PATCH 13/13] sata_mv use hweight16() for bit counting (V2)
  • From: Mark Lord
• Re: [PATCH 13/13] sata_mv use hweight16() for bit counting
  • From: Mark Lord
• [PATCH 13/13] sata_mv use hweight16() for bit counting
  • From: Mark Lord
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Alan Cox
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Mark Lord
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Mark Lord
• Re: SATA spec rev 2.6 feature NCQ priority support
  • From: Jeremy Jackson
• Re: [PATCH 02/12] sata_mv pci features
  • From: Mark Lord
• SATA spec rev 2.6 feature NCQ priority support
  • From: Jeremy Jackson
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Grant Grundler
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Grant Grundler
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Dave Jones
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Grant Grundler
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: [PATCH 02/12] sata_mv pci features
  • From: Grant Grundler
• Remove Asus EEE UDMA/33 limitation.
  • From: Dave Jones
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Borislav Petkov
• Re: dvd writing problem
  • From: Mark Lord
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Mark Lord
• Re: dvd writing problem
  • From: Gene Heskett
• [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Mark Lord
• [PATCH 11/12] sata_mv delayed eh handling
  • From: Mark Lord
• [PATCH 10/12] sata_mv libata: export ata_eh_analyze_ncq_error
  • From: Mark Lord
• [PATCH 09/12] sata_mv new mv_port_intr function
  • From: Mark Lord
• [PATCH 08/12] sata_mv fix mv_host_intr bug for hc_irq_cause
  • From: Mark Lord
• [PATCH 07/12] sata_mv NCQ and SError fixes for mv_err_intr
  • From: Mark Lord
• [PATCH 06/12] sata_mv rearrange mv_config_fbs
  • From: Mark Lord
• [PATCH 05/12] sata_mv errata workaround for sata25 part 1
  • From: Mark Lord
• [PATCH 04/12] sata_mv new mv_qc_defer method
  • From: Mark Lord
• [PATCH 03/12] sata_mv wait for empty+idle
  • From: Mark Lord
• [PATCH 02/12] sata_mv pci features
  • From: Mark Lord
• [PATCH 01/12] sata_mv more cosmetic changes
  • From: Mark Lord
• [PATCH 00/12] sata_mv: The last big set for 2.6.26
  • From: Mark Lord
• Re: dvd writing problem
  • From: Andrew Morton
• [PATCH 2/8] ide: use get_unaligned_* helpers
  • From: Harvey Harrison
• Re: libata sata_via unusual behaviour
  • From: Mark Lord
• RE: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Gaston, Jason D
• Re: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Tejun Heo
• RE: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Gaston, Jason D
• Re: libata sata_via unusual behaviour
  • From: Alan Cox
• libata sata_via unusual behaviour
  • From: Paolo
• [PATCH 03/10 UPDATED] sata_inic162x: update TF read handling
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: improve post-reset device ready test
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• [PATCH v2 07/13] ide: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 02/13] ide-cd: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 03/13] ide-disk: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 12/13] block: remove the checking for NULL queue in blk_put_request
  • From: FUJITA Tomonori
• [PATCH v2 09/13] ide: remove ide_init_drive_cmd
  • From: FUJITA Tomonori
• [PATCH v2 13/13] block: unexport blk_end_sync_rq
  • From: FUJITA Tomonori
• [PATCH v2 08/13] ide: remove ide_wait/head_wait path in ide_do_drive_cmd
  • From: FUJITA Tomonori
• [PATCH v2 10/13] ide-cd: remove ide_cd_init_rq
  • From: FUJITA Tomonori
• [PATCH v2 11/13] block: convert pd_special_command to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 06/13] ide-tape: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 01/13] ide-cd: convert ide_cd_queue_pc to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 04/13] ide-floppy: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 05/13] ide-taskfile: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: siimage breakage: no MMIO
  • From: Jeremy Kerr
• Re: siimage breakage: no MMIO
  • From: Bartlomiej Zolnierkiewicz
• siimage breakage: no MMIO
  • From: Jeremy Kerr
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• [PATCH #upstream-fixes] ata_piix: verify SIDPR access before enabling it
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• pata_jmicron: no drives found on post 2.6.25 kernels
  • From: Luca Tettamanti
• [PATCH] libata: fix libata-scsi kernel-doc notation
  • From: Randy Dunlap
• [PATCH] pata_atiixp: Don't disable
  • From: Alan Cox
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Sergei Shtylyov
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• Re: [PATCHSET] sata_inic162x: make it work
  • From: Tejun Heo
• [PATCH 10/10] sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
  • From: Tejun Heo
• [PATCH 09/10] sata_inic162x: add cardbus support
  • From: Tejun Heo
• [PATCH 07/10] sata_inic162x: use IDMA for ATAPI commands
  • From: Tejun Heo
• [PATCH 08/10] sata_inic162x: kill now unused SFF related stuff
  • From: Tejun Heo
• [PATCH 05/10] sata_inic162x: kill now unused bmdma related stuff
  • From: Tejun Heo
• [PATCH 06/10] sata_inic162x: use IDMA for non DMA ATA commands
  • From: Tejun Heo
• [PATCH 04/10] sata_inic162x: use IDMA for ATA_PROT_DMA
  • From: Tejun Heo
• [PATCH 02/10] sata_inic162x: add / update constants
  • From: Tejun Heo
• [PATCH 03/10] sata_inic162x: update TF read handling
  • From: Tejun Heo
• [PATCHSET] sata_inic162x: make it work
  • From: Tejun Heo
• [PATCH 01/10] sata_inic162x: misc clean ups
  • From: Tejun Heo
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] Re: libata: PIO bounce copies to avoid long IRQ off runs
  • From: Alan Cox
• [PATCH] Re: libata: PIO bounce copies to avoid long IRQ off runs
  • From: Jeff Garzik
• [PATCH] libata.h: reorganize ata_device a bit
  • From: Jeff Garzik
• [PATCH] pata_atiixp fix PIO timing misprogramming
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: SB600 ahci can't do MSI
  • From: Jeff Garzik
• Re: [PATCH] pata_via: Fix 6410 misdetect
  • From: Jeff Garzik
• Re: [PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: fix crash at boot with siimage driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Sergei Shtylyov
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Sergei Shtylyov
• Re: [PATCH] libata: PIO bounce copies to avoid long IRQ off runs
  • From: Alan Cox
• [PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC
  • From: Anton Vorontsov
• Re: [PATCH] libata: PIO bounce copies to avoid long IRQ off runs
  • From: Grant Grundler
• Re: Status of NCQ for the Promise SATA 300 TX2Plus?
  • From: Mikael Pettersson
• Re: [PATCH] ide: fix crash at boot with siimage driver
  • From: Sergei Shtylyov
• Re: [PATCH] ide: fix au1xxx-ide breakage
  • From: Sergei Shtylyov
• Re: Re[2]: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset
  • From: Oliver Pinter
• [Bug 10574] Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• [Bug 10574] Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• [PATCH] libata: PIO bounce copies to avoid long IRQ off runs
  • From: Alan Cox
• [PATCH] pata_via: Fix 6410 misdetect
  • From: Alan Cox
• Re: [PATCH 0/6] add large command support to the block layer
  • From: FUJITA Tomonori
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Jens Axboe
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Jens Axboe
• Re: [PATCH 0/6] add large command support to the block layer
  • From: FUJITA Tomonori
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Bartlomiej Zolnierkiewicz
• [Bug 10574] Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Jens Axboe
• [PATCH #upstream-fixes] ahci: SB600 ahci can't do MSI
  • From: Tejun Heo
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 2/2 UPDATED] libata-scsi: improve rbuf handling for simulated commands
  • From: Jeff Garzik
• Re: [PATCH] sata_mv Improve naming of main_irq cause/mask identifiers
  • From: Jeff Garzik
• Re: [ATA] Rename routerboard 500 to 532
  • From: Jeff Garzik
• [PATCH] ide: fix crash at boot with siimage driver
  • From: Benjamin Herrenschmidt
• Re: [PATCH 2/3] siimage: add sil_* I/O ops
  • From: Benjamin Herrenschmidt
• Status of NCQ for the Promise SATA 300 TX2Plus?
  • From: Scott A. Conway
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re[2]: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset
  • From: speedy
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• [Bug 10574] New: Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• Inconsistent behavior of mount for CDs
  • From: Frans Pop
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• [git patches] IDE updates part 5
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix au1xxx-ide breakage
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] piix: add Asus Eee 701 controller to short cable list
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]
  • From: Bartlomiej Zolnierkiewicz
• ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Mode Sense
  • From: Richard Scobie
• Re: sata_mv performance; impact of NCQ
  • From: Jeff Garzik
• ata: Initializer Entries defined twice
  • From: Harvey Harrison
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Sergei Shtylyov
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_mv performance; impact of NCQ
  • From: Alan Cox
• Re: sata_mv performance; impact of NCQ
  • From: Mark Lord
• Re: sata_mv performance; impact of NCQ
  • From: Jody McIntyre
• Re: sata_mv performance; impact of NCQ
  • From: Jody McIntyre
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Sergei Shtylyov
• Re: [ATA] Rename routerboard 500 to 532
  • From: Ralf Baechle
• [ATA] Rename routerboard 500 to 532
  • From: Ralf Baechle
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alan Cox
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• [PATCH #upstream-fixes 2/2 UPDATED] libata-scsi: improve rbuf handling for simulated commands
  • From: Tejun Heo
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alan Cox
• Re: [PATCH #upstream-fixes 2/2] libata-scsi: improve rbuf handling for simulated commands
  • From: FUJITA Tomonori
• Re: [PATCH #upstream-fixes 2/2] libata-scsi: improve rbuf handling for simulated commands
  • From: Petr Vandrovec
• [PATCH #upstream-fixes 2/2] libata-scsi: improve rbuf handling for simulated commands
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata-scsi: clean up inquiry / mode sense related functions
  • From: Tejun Heo
• [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Sam Ravnborg
• Re: [PATCH 2/3] siimage: add sil_* I/O ops
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] siimage: coding style cleanup (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] siimage: coding style cleanup (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• [git patches] IDE updates part 4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: [PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  • From: Bryan Wu
• Re: [PATCH 5/6] ide: use blk_rq_init() to initialize the request
  • From: Boaz Harrosh
• Re: [PATCH 6/6] block: add large command support
  • From: Boaz Harrosh
• Re: [PATCH 4/6] block: use blk_rq_init() to initialize the request
  • From: Boaz Harrosh
• Re: [PATCH 3/6] block: rename and export rq_init()
  • From: Boaz Harrosh
• Re: [RFC 0/5] block large commands support continue
  • From: Boaz Harrosh
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [RFC 0/5] block large commands support continue
  • From: Boaz Harrosh
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Nish Aravamudan
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Nish Aravamudan
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Jeff Garzik
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Nish Aravamudan
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• [git patches] IDE updates part 3
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: manage resources for PCI devices in ide_pci_enable() (take 3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Sergei Shtylyov
• [git patches] IDE updates part 2
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset
  • From: Andrew Morton
• [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: sata_mv performance; impact of NCQ
  • From: Mark Lord
• Re: sata_mv performance; impact of NCQ
  • From: Grant Grundler
• sata_mv performance; impact of NCQ
  • From: Jody McIntyre
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: FUJITA Tomonori
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Grant Grundler
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: James Bottomley
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Jeff Garzik
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: FUJITA Tomonori
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: James Bottomley
• [PATCH 1/6] block: no need to initialize rq->cmd in prepare_flush_fn hook
  • From: FUJITA Tomonori
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Grant Grundler
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• [PATCH 0/6] add large command support to the block layer
  • From: FUJITA Tomonori
• [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: FUJITA Tomonori
• [PATCH 6/6] block: add large command support
  • From: FUJITA Tomonori
• [PATCH 4/6] block: use blk_rq_init() to initialize the request
  • From: FUJITA Tomonori
• [PATCH 5/6] ide: use blk_rq_init() to initialize the request
  • From: FUJITA Tomonori
• [PATCH 3/6] block: rename and export rq_init()
  • From: FUJITA Tomonori
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• [PATCH] sata_mv Improve naming of main_irq cause/mask identifiers
  • From: Mark Lord
• libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• it821x problems continue with 2.6.25
  • From: Marc Zuckman
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• [PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  • From: Bryan Wu
• Re: [2.6 patch] xtensa: don't offer ATA
  • From: Christian Zankel
• Re: [PATCH 2/3] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared"
  • From: Bryan Wu
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 3/3] [libata/BF54x]: Fix compling failure bug - change variable's name according to API update
  • From: Jeff Garzik
• Re: [PATCH 2/3] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared"
  • From: Jeff Garzik
• Re: [PATCH] libata-eh set tf flags in NCQ EH result_tf
  • From: Jeff Garzik
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Jeff Garzik
• Re: [2.6 patch] make sata_set_spd_needed() static
  • From: Jeff Garzik
• Re: [2.6 patch] make sata_print_link_status() static
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_nv: make hardreset return -EAGAIN on success
  • From: Jeff Garzik
• Re: [2.6 patch] libata-acpi.c: remove unneeded #if's
  • From: Jeff Garzik
• Re: [PATCH] libata: make WARN_ON conditions in ata_sff_hsm_move() more strict
  • From: Jeff Garzik
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Jeff Garzik
• Re: [patch 1/2] ATA/IDE: fix platform driver hotplug/coldplug
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_sis: SCR accessors should return -EINVAL when the requested SCR isn't available
  • From: Jeff Garzik
• Re: libata: functions with definition should not be extern
  • From: Jeff Garzik
• [PATCH 3/3] [libata/BF54x]: Fix compling failure bug - change variable's name according to API update
  • From: Bryan Wu
• [PATCH 1/3] [libata/BF54x]: decrease count first.
  • From: Bryan Wu
• [PATCH 2/3] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared"
  • From: Bryan Wu
• [PATCH 0/3] [libata/BF54x]: bug fixing and updates
  • From: Bryan Wu
• Re: ICH7: ata_piix twice as fast as ahci?
  • From: kyle
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• RE: Add BIOS/OS handoff feature to AHCI
  • From: Zhao, Richard
• Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Tejun Heo
• libata: functions with definition should not be extern
  • From: Harvey Harrison
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• RE: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Huang, Shane
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Regular device resets on esata harddrives
  • From: Gustav
• Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Tejun Heo
• [patch 08/15] m68k: macide doesnt check for Mac
  • From: Geert Uytterhoeven
• Re: [patch 2/2] libata: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [2.6 patch] select ATA_SFF
  • From: Alan Cox
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [2.6 patch] remove ata_cable_sata()
  • From: Alan Cox
• Re: [2.6 patch] select ATA_SFF
  • From: Alan Cox
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Mark Lord
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Alan Cox
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• Re: [2.6 patch] remove ata_cable_sata()
  • From: Adrian Bunk
• Re: [2.6 patch] remove ata_cable_sata()
  • From: Alan Cox
• ahci slow transfer rate with kernel 2.6.23-2.6.25
  • From: kyle
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo