Tejun, Since enabling PMP support in sata_mv, there have been some recent reports of not all drives being found on a PM. I can reproduce this here myself, too: (1) silicon image PM with four drives attached. (2) power-down the PM. (3) rmmod sata_mv ; modprobe sata_mv (latest upstream). (4) plug (power off) PM into sata_mv card (7042 chipset). (5) power on the PM. (6) watch only 2-3 of the four drives get found. If the PM was already powered on in advance, then all drives are found. sata_mv relies entirely on libata-*.c for PMP resets/enumerations, so I'm not sure that the problem is in sata_mv. Any ideas? -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html