Hi Mikael & list,
I have previously reported problems with my setup:
SATA300TX4 + 4 Seagate Barracuda ES 500GB
Just for the record: using the same setup with linux kernel 2.6.25.4
shows the same problem running at 3.0gbps:
[ 789.196047] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1380000
action 0x2 frozen
[ 789.196057] ata1: SError: { 10B8B Dispar BadCRC TrStaTrns }
[ 789.196066] ata1.00: cmd c8/00:00:00:0f:e6/00:00:00:00:00/e1 tag 0
dma 131072 in
[ 789.196068] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 789.196072] ata1.00: status: { DRDY }
[ 794.565999] ata1: port is slow to respond, please be patient (Status
0xff)
[ 799.245997] ata1: device not ready (errno=-16), forcing hardreset
[ 799.246007] ata1: hard resetting link
[ 805.456006] ata1: port is slow to respond, please be patient (Status
0xff)
[ 809.295996] ata1: COMRESET failed (errno=-16)
[ 809.296006] ata1: hard resetting link
[ 815.506040] ata1: port is slow to respond, please be patient (Status
0xff)
[ 819.346000] ata1: COMRESET failed (errno=-16)
[ 819.346009] ata1: hard resetting link
[ 825.555998] ata1: port is slow to respond, please be patient (Status
0xff)
[ 854.358881] ata1: COMRESET failed (errno=-16)
[ 854.358894] ata1: limiting SATA link speed to 1.5 Gbps
[ 854.358898] ata1: hard resetting link
[ 859.368879] ata1: COMRESET failed (errno=-16)
[ 859.368888] ata1: reset failed, giving up
[ 859.368893] ata1.00: disabled
[ 859.368910] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1390002 action
0xa frozen t4
[ 859.368913] ata1: hotplug_status 0x80
[ 859.368918] ata1: SError: { RecovComm PHYRdyChg 10B8B Dispar BadCRC
TrStaTrns }
[ 859.368974] ata1: hard resetting link
[ 865.978881] ata1: port is slow to respond, please be patient (Status
0xff)
[ 869.399061] ata1: COMRESET failed (errno=-16)
[ 869.399071] ata1: hard resetting link
[ 876.008881] ata1: port is slow to respond, please be patient (Status
0xff)
[ 879.428879] ata1: COMRESET failed (errno=-16)
[ 879.428889] ata1: hard resetting link
[ 886.038996] ata1: port is slow to respond, please be patient (Status
0xff)
[ 914.478964] ata1: COMRESET failed (errno=-16)
[ 914.478977] ata1: limiting SATA link speed to 1.5 Gbps
[ 914.478981] ata1: hard resetting link
[ 919.528881] ata1: COMRESET failed (errno=-16)
[ 919.528890] ata1: reset failed, giving up
[ 919.528903] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1390002 action
0xa frozen t3
[ 919.528906] ata1: hotplug_status 0x80
[ 919.528911] ata1: SError: { RecovComm PHYRdyChg 10B8B Dispar BadCRC
TrStaTrns }
[ 919.528970] ata1: hard resetting link
[ 926.138988] ata1: port is slow to respond, please be patient (Status
0xff)
[ 929.559073] ata1: COMRESET failed (errno=-16)
[ 929.559083] ata1: hard resetting link
[ 936.168995] ata1: port is slow to respond, please be patient (Status
0xff)
[ 939.588874] ata1: COMRESET failed (errno=-16)
[ 939.588884] ata1: hard resetting link
[ 946.198886] ata1: port is slow to respond, please be patient (Status
0xff)
[ 974.638883] ata1: COMRESET failed (errno=-16)
[ 974.638895] ata1: limiting SATA link speed to 1.5 Gbps
[ 974.638898] ata1: hard resetting link
[ 979.688879] ata1: COMRESET failed (errno=-16)
[ 979.688890] ata1: reset failed, giving up
[ 979.688909] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1390002 action
0xa frozen t2
[ 979.688912] ata1: hotplug_status 0x80
[ 979.688916] ata1: SError: { RecovComm PHYRdyChg 10B8B Dispar BadCRC
TrStaTrns }
[ 979.688967] ata1: hard resetting link
[ 986.298884] ata1: port is slow to respond, please be patient (Status
0xff)
[ 989.718881] ata1: COMRESET failed (errno=-16)
[ 989.718891] ata1: hard resetting link
[ 996.328887] ata1: port is slow to respond, please be patient (Status
0xff)
[ 999.748876] ata1: COMRESET failed (errno=-16)
[ 999.748886] ata1: hard resetting link
[ 1006.358888] ata1: port is slow to respond, please be patient (Status
0xff)
[ 1034.798882] ata1: COMRESET failed (errno=-16)
[ 1034.798894] ata1: limiting SATA link speed to 1.5 Gbps
[ 1034.798898] ata1: hard resetting link
[ 1039.848875] ata1: COMRESET failed (errno=-16)
[ 1039.848884] ata1: reset failed, giving up
[ 1039.848905] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1390002 action
0xa frozen t1
[ 1039.848908] ata1: hotplug_status 0x80
[ 1039.848912] ata1: SError: { RecovComm PHYRdyChg 10B8B Dispar BadCRC
TrStaTrns }
[ 1039.848969] ata1: hard resetting link
[ 1046.458878] ata1: port is slow to respond, please be patient (Status
0xff)
[ 1049.878879] ata1: COMRESET failed (errno=-16)
[ 1049.878889] ata1: hard resetting link
[ 1056.488887] ata1: port is slow to respond, please be patient (Status
0xff)
[ 1059.908881] ata1: COMRESET failed (errno=-16)
[ 1059.908891] ata1: hard resetting link
[ 1066.518879] ata1: port is slow to respond, please be patient (Status
0xff)
[ 1094.958879] ata1: COMRESET failed (errno=-16)
[ 1094.958892] ata1: limiting SATA link speed to 1.5 Gbps
[ 1094.958896] ata1: hard resetting link
[ 1100.008876] ata1: COMRESET failed (errno=-16)
[ 1100.008885] ata1: reset failed, giving up
[ 1100.008891] ata1: EH pending after 5 tries, giving up
[ 1100.008909] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 1100.008913] sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
[ 1100.008918] Descriptor sense data with sense descriptors (in hex):
[ 1100.008921] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1100.008928] 00 00 00 09
[ 1100.008931] sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
[ 1100.008934] end_request: I/O error, dev sda, sector 31854336
[ 1100.008939] Buffer I/O error on device sda, logical block 3981792
[ 1100.008944] Buffer I/O error on device sda, logical block 3981793
[ 1100.008948] Buffer I/O error on device sda, logical block 3981794
[ 1100.008951] Buffer I/O error on device sda, logical block 3981795
[ 1100.008955] Buffer I/O error on device sda, logical block 3981796
[ 1100.008958] Buffer I/O error on device sda, logical block 3981797
[ 1100.008961] Buffer I/O error on device sda, logical block 3981798
[ 1100.008964] Buffer I/O error on device sda, logical block 3981799
[ 1100.008967] Buffer I/O error on device sda, logical block 3981800
[ 1100.008970] Buffer I/O error on device sda, logical block 3981801
[ 1100.008990] sd 0:0:0:0: rejecting I/O to offline device
[ 1100.008998] ata1: EH complete
[ 1100.009008] ata1.00: detaching (SCSI 0:0:0:0)
[ 1100.009208] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1100.009509] sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
[ 1100.009514] end_request: I/O error, dev sda, sector 31854592
[ 1100.010478] sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
[ 1100.010483] sd 0:0:0:0: [sda] Stopping disk
[ 1100.010492] sd 0:0:0:0: [sda] START_STOP FAILED
[ 1100.010495] sd 0:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
Using Mikaels 1.5gbps patch produces no errors doing the same test.
Best regards,
Peter
Peter Favrholdt wrote:
Hi Mikael,
Thanks!
It works perfectly at 1.5Gbps :-)
I think that because it fails at 3Gbps it might eventually fail at
1.5Gbps also... And the error handling was not robust (in my setup with
these drives at 3Gbps).
If I can help investigate further, I'm happy to do that. I have a spare
controller card so I could try swapping them. Do you have any
suggestions for what I should try next?
Best regards,
Peter
Mikael Pettersson wrote:
Peter Favrholdt writes:
> If it is not too much of a hassle, could you please make a 1.5Gbps
patch > for 2.6.24 for me to try out? If it solves the problem
(without me ever > touching the cables) we know for sure it is
speed-related and not due to > kernel version.
No problem. I had intended to drop that patch after 2.6.24-rc8 as it
ought to be obsolete, but then again it might not be. It's available
here:
<http://user.it.uu.se/~mikpe/linux/patches/2.6/patch-sata_promise-limit-sataii-to-1.5Gbps-2.6.24>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html