Linux IDE Archive

• Thread Index

• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Jens Axboe
• Re: Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Mike Hokenson
• [2,6 patch] make ide-iops.c:SELECT_MASK() static
  • From: Adrian Bunk
• Initio 162x SATA controllers
  • From: Johan van den Berg
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Sergei Shtylyov
• Re: Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Jeff Garzik
• Re: [PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd()
  • From: FUJITA Tomonori
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: [PATCH] libata: Add Intel SCH PATA Support
  • From: Sergei Shtylyov
• Re: Switching ICH7 to AHCI mode?
  • From: Florian Echtler
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• Marvell 88SE6121 PATA in 2.6.25 (ahci)
  • From: Mike Hokenson
• Re: Switching ICH7 to ACPI mode?
  • From: Andre Tomt
• Re: Suspend to memory is freezing my machine
  • From: Robert Hancock
• Switching ICH7 to ACPI mode?
  • From: Florian Echtler
• Re: Suspend to memory is freezing my machine
  • From: Jacek Luczak
• Re: Suspend to memory is freezing my machine
  • From: Jacek Luczak
• Re: [PATCH] LBA28/LBA48 off-by-one bug in ata.h
  • From: Greg Freemyer
• Re: Suspend to memory is freezing my machine
  • From: Robert Hancock
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: IDE_HFLAG_SERIALIZE_DMA bugfix
  • From: Bartlomiej Zolnierkiewicz
• Re: Asus DRW-2014L1T SATA DVD drive and sata_via
  • From: Jeff Garzik
• [PATCH] ide: remove try_to_flush_leftover_data()
  • From: Bartlomiej Zolnierkiewicz
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Robert Hancock
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Alan Cox
• Asus DRW-2014L1T SATA DVD drive and sata_via
  • From: Bruce Hill, Jr.
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] ide: use __generic_unplug_device() in ide_do_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/8] ide: use get_unaligned_* helpers
  • From: Bartlomiej Zolnierkiewicz
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Matthew Garrett
• [PATCH] LBA28/LBA48 off-by-one bug in ata.h
  • From: Taisuke Yamada
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• [patch 1/1] pata_atiixp: Don't disable
  • From: akpm
• Re: [patch 3/3] pata_atiixp: Don't disable
  • From: Alan Cox
• Re: [patch 2/3] pata_atiixp: simplex clear
  • From: Alan Cox
• [patch 3/3] pata_atiixp: Don't disable
  • From: akpm
• [patch 1/3] ata: remove FIT() macro
  • From: akpm
• [patch 2/3] pata_atiixp: simplex clear
  • From: akpm
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Mark Lord
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Grant Grundler
• Re: [PATCH 13/13] sata_mv use hweight16() for bit counting (V2)
  • From: Grant Grundler
• Re: [PATCH 02/12] sata_mv pci features
  • From: Grant Grundler
• [PATCH 13/13] sata_mv use hweight16() for bit counting (V2)
  • From: Mark Lord
• Re: [PATCH 13/13] sata_mv use hweight16() for bit counting
  • From: Mark Lord
• [PATCH 13/13] sata_mv use hweight16() for bit counting
  • From: Mark Lord
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Alan Cox
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Mark Lord
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Mark Lord
• Re: SATA spec rev 2.6 feature NCQ priority support
  • From: Jeremy Jackson
• Re: [PATCH 02/12] sata_mv pci features
  • From: Mark Lord
• SATA spec rev 2.6 feature NCQ priority support
  • From: Jeremy Jackson
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Grant Grundler
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Grant Grundler
• Re: Remove Asus EEE UDMA/33 limitation.
  • From: Dave Jones
• Re: [PATCH 03/12] sata_mv wait for empty+idle
  • From: Grant Grundler
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: [PATCH 02/12] sata_mv pci features
  • From: Grant Grundler
• Remove Asus EEE UDMA/33 limitation.
  • From: Dave Jones
• Re: [PATCH v2 00/13] removing the on-stack struct request
  • From: Borislav Petkov
• Re: dvd writing problem
  • From: Mark Lord
• Re: [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Mark Lord
• Re: dvd writing problem
  • From: Gene Heskett
• [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching
  • From: Mark Lord
• [PATCH 11/12] sata_mv delayed eh handling
  • From: Mark Lord
• [PATCH 10/12] sata_mv libata: export ata_eh_analyze_ncq_error
  • From: Mark Lord
• [PATCH 09/12] sata_mv new mv_port_intr function
  • From: Mark Lord
• [PATCH 08/12] sata_mv fix mv_host_intr bug for hc_irq_cause
  • From: Mark Lord
• [PATCH 07/12] sata_mv NCQ and SError fixes for mv_err_intr
  • From: Mark Lord
• [PATCH 06/12] sata_mv rearrange mv_config_fbs
  • From: Mark Lord
• [PATCH 05/12] sata_mv errata workaround for sata25 part 1
  • From: Mark Lord
• [PATCH 04/12] sata_mv new mv_qc_defer method
  • From: Mark Lord
• [PATCH 03/12] sata_mv wait for empty+idle
  • From: Mark Lord
• [PATCH 02/12] sata_mv pci features
  • From: Mark Lord
• [PATCH 01/12] sata_mv more cosmetic changes
  • From: Mark Lord
• [PATCH 00/12] sata_mv: The last big set for 2.6.26
  • From: Mark Lord
• Re: dvd writing problem
  • From: Andrew Morton
• [PATCH 2/8] ide: use get_unaligned_* helpers
  • From: Harvey Harrison
• Re: libata sata_via unusual behaviour
  • From: Mark Lord
• RE: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Gaston, Jason D
• Re: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Tejun Heo
• RE: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Gaston, Jason D
• Re: libata sata_via unusual behaviour
  • From: Alan Cox
• libata sata_via unusual behaviour
  • From: Paolo
• [PATCH 03/10 UPDATED] sata_inic162x: update TF read handling
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: improve post-reset device ready test
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• [PATCH v2 07/13] ide: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 02/13] ide-cd: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 03/13] ide-disk: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 12/13] block: remove the checking for NULL queue in blk_put_request
  • From: FUJITA Tomonori
• [PATCH v2 09/13] ide: remove ide_init_drive_cmd
  • From: FUJITA Tomonori
• [PATCH v2 13/13] block: unexport blk_end_sync_rq
  • From: FUJITA Tomonori
• [PATCH v2 08/13] ide: remove ide_wait/head_wait path in ide_do_drive_cmd
  • From: FUJITA Tomonori
• [PATCH v2 10/13] ide-cd: remove ide_cd_init_rq
  • From: FUJITA Tomonori
• [PATCH v2 11/13] block: convert pd_special_command to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 06/13] ide-tape: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 01/13] ide-cd: convert ide_cd_queue_pc to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 04/13] ide-floppy: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 05/13] ide-taskfile: convert ide_do_drive_cmd path to use blk_execute_rq
  • From: FUJITA Tomonori
• [PATCH v2 00/13] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: siimage breakage: no MMIO
  • From: Jeremy Kerr
• Re: siimage breakage: no MMIO
  • From: Bartlomiej Zolnierkiewicz
• siimage breakage: no MMIO
  • From: Jeremy Kerr
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• [PATCH #upstream-fixes] ata_piix: verify SIDPR access before enabling it
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• pata_jmicron: no drives found on post 2.6.25 kernels
  • From: Luca Tettamanti
• [PATCH] libata: fix libata-scsi kernel-doc notation
  • From: Randy Dunlap
• [PATCH] pata_atiixp: Don't disable
  • From: Alan Cox
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Sergei Shtylyov
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• Re: [PATCHSET] sata_inic162x: make it work
  • From: Tejun Heo
• [PATCH 10/10] sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
  • From: Tejun Heo
• [PATCH 09/10] sata_inic162x: add cardbus support
  • From: Tejun Heo
• [PATCH 07/10] sata_inic162x: use IDMA for ATAPI commands
  • From: Tejun Heo
• [PATCH 08/10] sata_inic162x: kill now unused SFF related stuff
  • From: Tejun Heo
• [PATCH 05/10] sata_inic162x: kill now unused bmdma related stuff
  • From: Tejun Heo
• [PATCH 06/10] sata_inic162x: use IDMA for non DMA ATA commands
  • From: Tejun Heo
• [PATCH 04/10] sata_inic162x: use IDMA for ATA_PROT_DMA
  • From: Tejun Heo
• [PATCH 02/10] sata_inic162x: add / update constants
  • From: Tejun Heo
• [PATCH 03/10] sata_inic162x: update TF read handling
  • From: Tejun Heo
• [PATCHSET] sata_inic162x: make it work
  • From: Tejun Heo
• [PATCH 01/10] sata_inic162x: misc clean ups
  • From: Tejun Heo
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] Re: libata: PIO bounce copies to avoid long IRQ off runs
  • From: Alan Cox
• [PATCH] Re: libata: PIO bounce copies to avoid long IRQ off runs
  • From: Jeff Garzik
• [PATCH] libata.h: reorganize ata_device a bit
  • From: Jeff Garzik
• [PATCH] pata_atiixp fix PIO timing misprogramming
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: SB600 ahci can't do MSI
  • From: Jeff Garzik
• Re: [PATCH] pata_via: Fix 6410 misdetect
  • From: Jeff Garzik
• Re: [PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: fix crash at boot with siimage driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Sergei Shtylyov
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Sergei Shtylyov
• Re: [PATCH] libata: PIO bounce copies to avoid long IRQ off runs
  • From: Alan Cox
• [PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC
  • From: Anton Vorontsov
• Re: [PATCH] libata: PIO bounce copies to avoid long IRQ off runs
  • From: Grant Grundler
• Re: Status of NCQ for the Promise SATA 300 TX2Plus?
  • From: Mikael Pettersson
• Re: [PATCH] ide: fix crash at boot with siimage driver
  • From: Sergei Shtylyov
• Re: [PATCH] ide: fix au1xxx-ide breakage
  • From: Sergei Shtylyov
• Re: Re[2]: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset
  • From: Oliver Pinter
• [Bug 10574] Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• [Bug 10574] Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• [PATCH] libata: PIO bounce copies to avoid long IRQ off runs
  • From: Alan Cox
• [PATCH] pata_via: Fix 6410 misdetect
  • From: Alan Cox
• Re: [PATCH 0/6] add large command support to the block layer
  • From: FUJITA Tomonori
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Jens Axboe
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Jens Axboe
• Re: [PATCH 0/6] add large command support to the block layer
  • From: FUJITA Tomonori
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Bartlomiej Zolnierkiewicz
• [Bug 10574] Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• Re: [PATCH 0/6] add large command support to the block layer
  • From: Jens Axboe
• [PATCH #upstream-fixes] ahci: SB600 ahci can't do MSI
  • From: Tejun Heo
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 2/2 UPDATED] libata-scsi: improve rbuf handling for simulated commands
  • From: Jeff Garzik
• Re: [PATCH] sata_mv Improve naming of main_irq cause/mask identifiers
  • From: Jeff Garzik
• Re: [ATA] Rename routerboard 500 to 532
  • From: Jeff Garzik
• [PATCH] ide: fix crash at boot with siimage driver
  • From: Benjamin Herrenschmidt
• Re: [PATCH 2/3] siimage: add sil_* I/O ops
  • From: Benjamin Herrenschmidt
• Status of NCQ for the Promise SATA 300 TX2Plus?
  • From: Scott A. Conway
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re[2]: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset
  • From: speedy
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• [Bug 10574] New: Hard disk makes bad noise at poweroff when shutting down.
  • From: bugme-daemon
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Tejun Heo
• Inconsistent behavior of mount for CDs
  • From: Frans Pop
• Re: ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• [git patches] IDE updates part 5
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix au1xxx-ide breakage
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] piix: add Asus Eee 701 controller to short cable list
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]
  • From: Bartlomiej Zolnierkiewicz
• ata_std_qc_defer not good enough for FIS-based switching ?
  • From: Mark Lord
• Mode Sense
  • From: Richard Scobie
• Re: sata_mv performance; impact of NCQ
  • From: Jeff Garzik
• ata: Initializer Entries defined twice
  • From: Harvey Harrison
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Sergei Shtylyov
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_mv performance; impact of NCQ
  • From: Alan Cox
• Re: sata_mv performance; impact of NCQ
  • From: Mark Lord
• Re: sata_mv performance; impact of NCQ
  • From: Jody McIntyre
• Re: sata_mv performance; impact of NCQ
  • From: Jody McIntyre
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Sergei Shtylyov
• Re: [ATA] Rename routerboard 500 to 532
  • From: Ralf Baechle
• [ATA] Rename routerboard 500 to 532
  • From: Ralf Baechle
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alan Cox
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• [PATCH #upstream-fixes 2/2 UPDATED] libata-scsi: improve rbuf handling for simulated commands
  • From: Tejun Heo
• Re: [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alan Cox
• Re: [PATCH #upstream-fixes 2/2] libata-scsi: improve rbuf handling for simulated commands
  • From: FUJITA Tomonori
• Re: [PATCH #upstream-fixes 2/2] libata-scsi: improve rbuf handling for simulated commands
  • From: Petr Vandrovec
• [PATCH #upstream-fixes 2/2] libata-scsi: improve rbuf handling for simulated commands
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata-scsi: clean up inquiry / mode sense related functions
  • From: Tejun Heo
• [PATCH] ata: Add Intel SCH PATA support (revised)
  • From: Alek Du
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Sam Ravnborg
• Re: [PATCH 2/3] siimage: add sil_* I/O ops
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] siimage: coding style cleanup (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] siimage: coding style cleanup (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• [git patches] IDE updates part 4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: [PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  • From: Bryan Wu
• Re: [PATCH 5/6] ide: use blk_rq_init() to initialize the request
  • From: Boaz Harrosh
• Re: [PATCH 6/6] block: add large command support
  • From: Boaz Harrosh
• Re: [PATCH 4/6] block: use blk_rq_init() to initialize the request
  • From: Boaz Harrosh
• Re: [PATCH 3/6] block: rename and export rq_init()
  • From: Boaz Harrosh
• Re: [RFC 0/5] block large commands support continue
  • From: Boaz Harrosh
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [RFC 0/5] block large commands support continue
  • From: Boaz Harrosh
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Nish Aravamudan
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Nish Aravamudan
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Jeff Garzik
• Re: 2.6.25-mm1 (no disks with sata_nv)
  • From: Nish Aravamudan
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• [git patches] IDE updates part 3
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: manage resources for PCI devices in ide_pci_enable() (take 3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Sergei Shtylyov
• [git patches] IDE updates part 2
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: Add Intel SCH PATA support
  • From: Alan Cox
• Re: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset
  • From: Andrew Morton
• [PATCH] ata: Add Intel SCH PATA support
  • From: Alek Du
• Re: sata_mv performance; impact of NCQ
  • From: Mark Lord
• Re: sata_mv performance; impact of NCQ
  • From: Grant Grundler
• sata_mv performance; impact of NCQ
  • From: Jody McIntyre
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: FUJITA Tomonori
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Grant Grundler
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: James Bottomley
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Jeff Garzik
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: FUJITA Tomonori
• Re: [dm-devel] [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: James Bottomley
• [PATCH 1/6] block: no need to initialize rq->cmd in prepare_flush_fn hook
  • From: FUJITA Tomonori
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Grant Grundler
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• [PATCH 0/6] add large command support to the block layer
  • From: FUJITA Tomonori
• [PATCH 2/6] block: no need to initialize rq->cmd with blk_get_request
  • From: FUJITA Tomonori
• [PATCH 6/6] block: add large command support
  • From: FUJITA Tomonori
• [PATCH 4/6] block: use blk_rq_init() to initialize the request
  • From: FUJITA Tomonori
• [PATCH 5/6] ide: use blk_rq_init() to initialize the request
  • From: FUJITA Tomonori
• [PATCH 3/6] block: rename and export rq_init()
  • From: FUJITA Tomonori
• Re: libata-eh/pmp command sequence on NCQ media error
  • From: Tejun Heo
• [PATCH] sata_mv Improve naming of main_irq cause/mask identifiers
  • From: Mark Lord
• libata-eh/pmp command sequence on NCQ media error
  • From: Mark Lord
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• it821x problems continue with 2.6.25
  • From: Marc Zuckman
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• [PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  • From: Bryan Wu
• Re: [2.6 patch] xtensa: don't offer ATA
  • From: Christian Zankel
• Re: [PATCH 2/3] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared"
  • From: Bryan Wu
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 3/3] [libata/BF54x]: Fix compling failure bug - change variable's name according to API update
  • From: Jeff Garzik
• Re: [PATCH 2/3] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared"
  • From: Jeff Garzik
• Re: [PATCH] libata-eh set tf flags in NCQ EH result_tf
  • From: Jeff Garzik
• Re: [PATCH 1/8] sata_mv more cosmetics
  • From: Jeff Garzik
• Re: [2.6 patch] make sata_set_spd_needed() static
  • From: Jeff Garzik
• Re: [2.6 patch] make sata_print_link_status() static
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_nv: make hardreset return -EAGAIN on success
  • From: Jeff Garzik
• Re: [2.6 patch] libata-acpi.c: remove unneeded #if's
  • From: Jeff Garzik
• Re: [PATCH] libata: make WARN_ON conditions in ata_sff_hsm_move() more strict
  • From: Jeff Garzik
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Jeff Garzik
• Re: [patch 1/2] ATA/IDE: fix platform driver hotplug/coldplug
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_sis: SCR accessors should return -EINVAL when the requested SCR isn't available
  • From: Jeff Garzik
• Re: libata: functions with definition should not be extern
  • From: Jeff Garzik
• [PATCH 3/3] [libata/BF54x]: Fix compling failure bug - change variable's name according to API update
  • From: Bryan Wu
• [PATCH 1/3] [libata/BF54x]: decrease count first.
  • From: Bryan Wu
• [PATCH 2/3] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared"
  • From: Bryan Wu
• [PATCH 0/3] [libata/BF54x]: bug fixing and updates
  • From: Bryan Wu
• Re: ICH7: ata_piix twice as fast as ahci?
  • From: kyle
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• RE: Add BIOS/OS handoff feature to AHCI
  • From: Zhao, Richard
• Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Tejun Heo
• libata: functions with definition should not be extern
  • From: Harvey Harrison
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• RE: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Huang, Shane
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Regular device resets on esata harddrives
  • From: Gustav
• Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Tejun Heo
• [patch 08/15] m68k: macide doesnt check for Mac
  • From: Geert Uytterhoeven
• Re: [patch 2/2] libata: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [2.6 patch] select ATA_SFF
  • From: Alan Cox
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [2.6 patch] remove ata_cable_sata()
  • From: Alan Cox
• Re: [2.6 patch] select ATA_SFF
  • From: Alan Cox
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Mark Lord
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Alan Cox
• Re: [RFC 0/5] block large commands support continue
  • From: Jens Axboe
• Re: [2.6 patch] remove ata_cable_sata()
  • From: Adrian Bunk
• Re: [2.6 patch] remove ata_cable_sata()
  • From: Alan Cox
• ahci slow transfer rate with kernel 2.6.23-2.6.25
  • From: kyle
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [RFC 0/5] block large commands support continue
  • From: FUJITA Tomonori
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Tejun Heo
• Re: "ata73" == "sd 72" ?
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] sata_sis: SCR accessors should return -EINVAL when the requested SCR isn't available
  • From: Patrick McHardy
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: AHCI w/ATAPI device problems on Intel Tolapai
  • From: Tejun Heo
• Re: v2.6.25: WARNING: at kernel/lockdep.c:2437 __lock_acquire+0xc69/0xfa0()
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  • From: Tejun Heo
• Re: [PATCH] libata-eh set tf flags in NCQ EH result_tf
  • From: Tejun Heo
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Tejun Heo
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Tejun Heo
• [PATCH] libata-eh set tf flags in NCQ EH result_tf
  • From: Mark Lord
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Mark Lord
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Mark Lord
• [PATCH #upstream-fixes] sata_sis: SCR accessors should return -EINVAL when the requested SCR isn't available
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Tejun Heo
• Re: [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Volker Armin Hemmann
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Mark Lord
• Re: [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Tejun Heo
• [PATCH] libata-eh copy result_tf flags from outgoing tf
  • From: Mark Lord
• Re: libata-eh not reporting failed LBA correctly?
  • From: Mark Lord
• libata-eh not reporting failed LBA correctly?
  • From: Mark Lord
• Re: [PATCH] pci_try_set_mwi() in sata_promise
  • From: Marin Mitov
• Re: [PATCH 1/5] block: no need to initialize rq->cmd
  • From: Boaz Harrosh
• [PATCH 5/5] block: add large command support
  • From: Boaz Harrosh
• [RFC PATCH 4/5] block: Use new blk_init_rq
  • From: Boaz Harrosh
• [RFC PATCH 3/5] block: Export rq_init, rename to blk_init_rq
  • From: Boaz Harrosh
• [PATCH 2/5] block: replace sizeof(rq->cmd) with BLK_MAX_CDB
  • From: Boaz Harrosh
• [PATCH 1/5] block: no need to initialize rq->cmd
  • From: Boaz Harrosh
• [RFC 0/5] block large commands support continue
  • From: Boaz Harrosh
• Re: [PATCH] pci_try_set_mwi() in sata_promise
  • From: Grant Grundler
• ide: failed opcode was: 0xea
  • From: Christian Kujau
• Re: [PATCH 0/8] sata_mv interrupt/eh fixes etc..
  • From: Mark Lord
• Re: [2.6 patch] select ATA_SFF
  • From: Mark Lord
• Re: [PATCH] pci_try_set_mwi() in sata_promise
  • From: Marin Mitov
• Re: [PATCH] pci_try_set_mwi() in sata_promise
  • From: Marin Mitov
• Re: [PATCH] pci_try_set_mwi() in sata_promise
  • From: Marin Mitov
• [PATCH] ahci: retry enabling AHCI a few times before spitting out WARN_ON()
  • From: Tejun Heo
• [PATCH] libata: make WARN_ON conditions in ata_sff_hsm_move() more strict
  • From: Tejun Heo
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [PATCH #upstream-fixes] sata_nv: make hardreset return -EAGAIN on success
  • From: Marc Dionne
• Re: [PATCH 00/11] removing the on-stack struct request
  • From: Boris Petkov
• Re: [PATCH 06/11] ide: make ide_do_drive_cmd return rq->errors
  • From: Boris Petkov
• Re: [PATCH 07/11] ide-tape: use blk_get_request in the ide_do_drive_cmd path
  • From: Boris Petkov
• Re: [REGRESSION][linux-next] ide0: failed to initialize IDE interface
  • From: Dmitri Vorobiev
• Re: [PATCH 00/11] removing the on-stack struct request
  • From: Jens Axboe
• Re: [PATCH 00/11] removing the on-stack struct request
  • From: FUJITA Tomonori
• Re: [PATCH 07/11] ide-tape: use blk_get_request in the ide_do_drive_cmd path
  • From: FUJITA Tomonori
• Re: [PATCH 06/11] ide: make ide_do_drive_cmd return rq->errors
  • From: FUJITA Tomonori
• Re: [REGRESSION][linux-next] ide0: failed to initialize IDE interface
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pci_try_set_mwi() in sata_promise
  • From: Mikael Pettersson
• Re: [PATCH 00/11] removing the on-stack struct request
  • From: Jens Axboe
• Re: [PATCH 00/11] removing the on-stack struct request
  • From: Borislav Petkov
• Re: [PATCH 06/11] ide: make ide_do_drive_cmd return rq->errors
  • From: Borislav Petkov
• Re: [PATCH 07/11] ide-tape: use blk_get_request in the ide_do_drive_cmd path
  • From: Borislav Petkov
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Tejun Heo
• Re: [Bugme-new] [Bug 10507] New: Kernel fails to properly identify SATA drives
  • From: Javier
• Re: [2.6 patch] select ATA_SFF
  • From: Jeff Garzik
• Re: [Bugme-new] [Bug 10507] New: Kernel fails to properly identify SATA drives
  • From: Andrew Morton
• Re: [PATCH #upstream-fixes] sata_nv: make hardreset return -EAGAIN on success
  • From: Roland Dreier
• [PATCH #upstream-fixes] sata_nv: make hardreset return -EAGAIN on success
  • From: Tejun Heo
• [PATCH] ide-scsi: remove kmalloced struct request
  • From: FUJITA Tomonori
• Re: [2.6 patch] select ATA_SFF
  • From: Tejun Heo
• Re: ahci performance problem? (much slower than sil24)
  • From: kyle
• ahci performance problem? (much slower than sil24)
  • From: kyle
• ahci performance problem? (much slower than sil24)
  • From: kyle
• ide0: DISABLED, NO IRQ
  • From: John Keller
• Config Disk, RGL10364 device is on DMA blacklist
  • From: Bjoern Olausson
• Re: [REGRESSION][linux-next] ide0: failed to initialize IDE interface
  • From: Dmitri Vorobiev
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• [PATCH] pci_try_set_mwi() in sata_promise
  • From: Marin Mitov
• Re: [PATCH] siimage: coding style cleanup (take 2)
  • From: James Courtier-Dutton
• [PATCH] siimage: coding style cleanup (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH 3/5] scc_pata: add ->dma_host_set and ->dma_start methods
  • From: Sergei Shtylyov
• Re: [PATCH 1/5] ide: add ide_pad_transfer() helper
  • From: Sergei Shtylyov
• Re: [PATCH 2/5] ide: skip "VLB sync" if host uses MMIO
  • From: Sergei Shtylyov
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Volker Armin Hemmann
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Tejun Heo
• Re: [2.6 patch] select ATA_SFF
  • From: Mark Lord
• Re: [2.6 patch] select ATA_SFF
  • From: Mark Lord
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Tejun Heo
• Re: [2.6 patch] select ATA_SFF
  • From: Mark Lord
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Tejun Heo
• Re: [2.6 patch] select ATA_SFF
  • From: Tejun Heo
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: [2.6 patch] select ATA_SFF
  • From: Tejun Heo
• Re: [2.6 patch] select ATA_SFF
  • From: Sergei Shtylyov
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Volker Armin Hemmann
• Re: [2.6 patch] select ATA_SFF
  • From: Jens Axboe
• RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Peer Chen
• Re: [PATCH 00/11] removing the on-stack struct request
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/11] block: remove the checking for NULL queue in blk_put_request
  • From: FUJITA Tomonori
• [PATCH 09/11] ide: call blk_put_request properly
  • From: FUJITA Tomonori
• [PATCH 10/11] block: convert pd to use blk_get_request
  • From: FUJITA Tomonori
• [PATCH 00/11] removing the on-stack struct request
  • From: FUJITA Tomonori
• [PATCH 08/11] ide-cd: use blk_get_request in the ide_do_drive_cmd path
  • From: FUJITA Tomonori
• [PATCH 07/11] ide-tape: use blk_get_request in the ide_do_drive_cmd path
  • From: FUJITA Tomonori
• [PATCH 06/11] ide: make ide_do_drive_cmd return rq->errors
  • From: FUJITA Tomonori
• [PATCH 04/11] ide-disk: use blk_get_request in the ide_do_drive_cmd path
  • From: FUJITA Tomonori
• [PATCH 05/11] ide-cd: convert ide_cd_queue_pc to use blk_get_request
  • From: FUJITA Tomonori
• [PATCH 02/11] ide-floppy: use blk_get_request in the ide_do_drive_cmd path
  • From: FUJITA Tomonori
• [PATCH 03/11] ide-taskfile: use blk_get_request in the ide_do_drive_cmd path
  • From: FUJITA Tomonori
• [PATCH 01/11] ide: use blk_get_request in the ide_do_drive_cmd path using ide_wait
  • From: FUJITA Tomonori
• [2.6 patch] libata-acpi.c: remove unneeded #if's
  • From: Adrian Bunk
• [2.6 patch] select ATA_SFF
  • From: Adrian Bunk
• Re: [2.6 patch] xtensa: don't offer ATA
  • From: Adrian Bunk
• RE: sata_mv errata function
  • From: Morrison, Tom
• Re: sata_mv errata function
  • From: Mark Lord
• RE: sata_mv errata function
  • From: Morrison, Tom
• Re: sata_mv errata function
  • From: Mark Lord
• sata_mv errata function
  • From: Sylver Bruneau
• Re: [2.6 patch] make sata_set_spd_needed() static
  • From: Adrian Bunk
• Re: [2.6 patch] make sata_set_spd_needed() static
  • From: Jeff Garzik
• [2.6 patch] remove ata_cable_sata()
  • From: Adrian Bunk
• [2.6 patch] libata-core.c: remove no longer used exports
  • From: Adrian Bunk
• [2.6 patch] make sata_set_spd_needed() static
  • From: Adrian Bunk
• [2.6 patch] make sata_print_link_status() static
  • From: Adrian Bunk
• [PATCH] ata_piix: add Asus Eee 701 controller to short cable list
  • From: Dan McGee
• Re: DRDY errors again
  • From: J.A. Magallón
• Re: Commit 305d2a1ab137d1... breaks sata_nv, and PMP woes
  • From: walt
• Commit 305d2a1ab137d1... breaks sata_nv, and PMP woes
  • From: Petr Vandrovec
• Re: [PATCH] libata: fix boot panic with SATAPI devices on non-SFF
  • From: Marc Dionne
• Problems with 2.6.24 and ICH7 controller
  • From: Yann SLADEK
• Re: [PATCH 8/8] sata_mv re-enable hotplug, update TODO list
  • From: Mark Lord
• REPOST: [PATCH 7/8] sata_mv leave SError bits untouched in mv_err_intr
  • From: Mark Lord
• REPOST: [PATCH 5/8] sata_mv tidy host controller interrupt handling
  • From: Mark Lord
• REPOST: [PATCH 4/8] sata_mv simplify request/response queue handling
  • From: Mark Lord
• REPOST: [PATCH 3/8] sata_mv simplify freeze/thaw bit-shift calculations
  • From: Mark Lord
• [PATCH 8/8] sata_mv re-enable hotplug, update TODO list
  • From: Mark Lord
• [PATCH 7/8] sata_mv leave SError bits untouched in mv_err_intr
  • From: Mark Lord
• [PATCH 6/8] sata_mv more interrupt handling rework
  • From: Mark Lord
• [PATCH 5/8] sata_mv tidy host controller interrupt handling
  • From: Mark Lord
• [PATCH 4/8] sata_mv simplify request/response queue handling
  • From: Mark Lord
• [PATCH 3/8] sata_mv simplify freeze/thaw bit-shift calculations
  • From: Mark Lord
• [PATCH 2/8] sata_mv mask all interrupt coalescing bits
  • From: Mark Lord
• [PATCH 1/8] sata_mv more cosmetics
  • From: Mark Lord
• [PATCH 0/8] sata_mv interrupt/eh fixes etc..
  • From: Mark Lord
• [PATCH] siimage: coding style cleanup
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] siimage: add sil_* I/O ops
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] siimage: remove proc_reports_siimage()
  • From: Sergei Shtylyov
• Re: [PATCH 1/3] siimage: do clocking register posting earlier in setup_mmio_siimage()
  • From: Sergei Shtylyov
• Re: [PATCH] libata: fix boot panic with SATAPI devices on non-SFF HBAs
  • From: James Bottomley
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Volker Armin Hemmann
• Re: WARNING: at drivers/ata/libata-sff.c:1016
  • From: Mark Lord
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Russell King
• Re: 2.6.25-mm1 -- Is this just my drive dying?
  • From: Andrew Morton
• RE: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Gaston, Jason D
• Re: WARNING: at drivers/ata/libata-sff.c:1016
  • From: Mark Lord
• AHCI w/ATAPI device problems on Intel Tolapai
  • From: Gaston, Jason D
• Re: IDE allmodconfig: probe_4drives error
  • From: Bartlomiej Zolnierkiewicz
• IDE allmodconfig: probe_4drives error
  • From: Jeff Garzik
• [patch 2/2] pata_atiixp: simplex clear
  • From: akpm
• [patch 1/2] ATA/IDE: fix platform driver hotplug/coldplug
  • From: akpm
• [PATCH] libata: fix boot panic with SATAPI devices on non-SFF HBAs
  • From: James Bottomley
• [PATCH] [v2] libata-core: set debug logging via module param
  • From: David Milburn
• Re: [PATCH] libata-core: set debug logging via module param
  • From: David Milburn
• Re: [PATCH] libata-core: set debug logging via module param
  • From: Sergei Shtylyov
• Re: "ata73" == "sd 72" ?
  • From: Mikael Pettersson
• Re: set pio timing in pata_atiixp.c
  • From: Jeff Garzik
• Re: "ata73" == "sd 72" ?
  • From: Jeff Garzik
• RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Peer Chen
• set pio timing in pata_atiixp.c
  • From: Edward Shao
• WARNING: at drivers/ata/libata-sff.c:1016
  • From: Mark Lord
• Re: Hot swapping drives
  • From: Mark Lord
• "ata73" == "sd 72" ?
  • From: Mark Lord
• [git patches] IDE updates part 1
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata-core: set debug logging via module param
  • From: David Milburn
• [PATCH] libata: implement support for 32-bit PIO transfers
  • From: Willy Tarreau
• Hot swapping drives
  • From: Richard Scobie
• Re: [PATCH 1/2] libata: implement ATA_IOC_GET_IO32/ATA_IOC_SET_IO32 ioctls
  • From: Willy Tarreau
• Re: [PATCH 01/07] sata_mv hardreset rework
  • From: Jeff Garzik
• Re: [PATCH] ata-acpi: don't call _GTF for disabled drive
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: implement ATA_IOC_GET_IO32/ATA_IOC_SET_IO32 ioctls
  • From: Jeff Garzik
• Re: [2.6 patch] xtensa: don't offer ATA
  • From: Jeff Garzik
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Lennart Sorensen
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Adrian Bunk
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Matthew Wilcox
• Re: [PATCH 4/4] block: add large command support
  • From: FUJITA Tomonori
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Boris Petkov
• Re: [PATCH 4/4] block: add large command support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/4] block: add large command support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Roel Kluin
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Russell King
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Adrian Bunk
• Re: [2.6 patch] ARM: always select HAVE_IDE
  • From: Russell King
• [2.6 patch] ARM: always select HAVE_IDE
  • From: Adrian Bunk
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Boris Petkov
• Re: Prevent busy looping
  • From: Elias Oltmanns
• Re: [PATCH 4/4] block: add large command support
  • From: Jens Axboe
• Re: [PATCH 4/4] block: add large command support
  • From: FUJITA Tomonori
• Re: [PATCH 4/4] block: add large command support
  • From: FUJITA Tomonori
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Roel Kluin
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Alan Cox
• Marvel 6121 ahci
  • From: Jose Alberto Reguero
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2.6.25-rc9] ATA/IDE: fix platform driver hotplug/coldplug
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] [IT821X IDE] Do not describe noraid parameter with its value
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/9] ide: add ->tf_load and ->tf_read methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/4] block: add large command support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-h8300: add ->{in,out}put_data methods (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] scc_pata: add ->{in,out}put_data methods (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] au1xxx-ide: add ->{in,out}put_data methods (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/6] scc_pata: add ->{in,out}put_data methods
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove ->cds field from ide_hwif_t (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] scc_pata: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_mv & pmp support
  • From: Tejun Heo
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Tejun Heo
• patch sysfs-add-sys-dev-char-block-to-lookup-sysfs-path-by-major-minor.patch added to gregkh-2.6 tree
  • From: gregkh
• Re: Western Digital GreenPower drives and Linux
  • From: Tvrtko A. Ursulin
• Re: Western Digital GreenPower drives and Linux
  • From: Tvrtko A. Ursulin
• [PATCH 07/07] sata_mv add temporary 3 second init delay for SiliconImage PMs
  • From: Mark Lord
• [PATCH 06/07] sata_mv remove redundant edma init code
  • From: Mark Lord
• [PATCH 05/07] sata_mv add basic port multiplier support
  • From: Mark Lord
• [PATCH 04/07] sata_mv fix SOC flags, enable NCQ on SOC
  • From: Mark Lord
• [PATCH 03/07] sata_mv disable hotplug for now
  • From: Mark Lord
• [PATCH 02/07] sata_mv cosmetics
  • From: Mark Lord
• [PATCH 01/07] sata_mv hardreset rework
  • From: Mark Lord
• Re: Western Digital GreenPower drives and Linux
  • From: Mark Lord
• Re: [PATCH 3/9] ide: add ->tf_load and ->tf_read methods
  • From: Sergei Shtylyov
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Frans Pop
• Re: Western Digital GreenPower drives and Linux
  • From: Christian Pernegger
• Re: [PATCH 2/6] scc_pata: add ->{in,out}put_data methods
  • From: Sergei Shtylyov
• Re: AHCI SATA DVD writing issue
  • From: davor emard
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: Western Digital GreenPower drives and Linux
  • From: Helge Hafting
• Re: [PATCH 4/4] block: add large command support
  • From: Jens Axboe
• Re: [PATCH 4/4] block: add large command support
  • From: Boaz Harrosh
• [Bug 7736] Change improve SCSI CDROM support help message to tell that is needed for cdrom drives via libata
  • From: bugme-daemon
• Re: [PATCH 4/4] block: add large command support
  • From: Jens Axboe
• [Bug 7736] Change improve SCSI CDROM support help message to tell that is needed for cdrom drives via libata
  • From: bugme-daemon
• Re: sata_mv & pmp support
  • From: Gwendal Grignou
• Re: sata_mv & pmp support
  • From: Tejun Heo
• [PATCH 3/6] IDE: ide-cd: fix test unsigned var < 0
  • From: Roel Kluin
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: [PATCH] sata_mv rework hardreset sequence
  • From: Mark Lord
• Re: sda
  • From: Mark Lord
• Re: [PATCH 4/4] block: add large command support
  • From: Bartlomiej Zolnierkiewicz
• Re: What to do about the 2TB limit on HDIO_GETGEO ?
  • From: Dan Williams
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: sda
  • From: Tejun Heo
• Re: 2.6.25-rc8-mm1: Intel SATA boot failure
  • From: Tilman Schmidt
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Tejun Heo
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Tejun Heo
• Re: [PATCH 4/4] block: add large command support
  • From: FUJITA Tomonori
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Russell King
• Re: sata_mv & pmp support
  • From: Tejun Heo
• Re: [PATCH 4/4] block: add large command support
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Adrian Bunk
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Russell King
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Adrian Bunk
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Russell King
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Russell King
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Russell King
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Adrian Bunk
• Re: [PATCH] Pb1200/DBAu1200: fix bad IDE resource size
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] remove the broken ETRAX_IDE driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Au1200: IDE driver build fix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: make ide_pci_check_iomem() actually work
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Au1200: kill IDE driver function prototypes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] scc_pata.c: do setup itself instead of ide_setup_pci_device ()
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] PCMCIA mustn't select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] avr32 mustn't select HAVE_IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: [patch 2/2] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Russell King - ARM Linux
• Re: [patch 2/2] libata: power off unused ports
  • From: Mark Lord
• Re: What to do about the 2TB limit on HDIO_GETGEO ?
  • From: H. Peter Anvin
• [PATCH] Pb1200/DBAu1200: fix bad IDE resource size
  • From: Sergei Shtylyov
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Volker Armin Hemmann
• [patch 0/2] libata: add HAVE_PATA_PLATFORM
  • From: Ben Dooks
• [patch 1/2] LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  • From: Ben Dooks
• [patch 2/2] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Ben Dooks
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Lennart Sorensen
• Re: What to do about the 2TB limit on HDIO_GETGEO ?
  • From: James Bottomley
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: sata_mv & pmp support
  • From: Mark Lord
• Re: sda
  • From: Mark Lord
• Re: What to do about the 2TB limit on HDIO_GETGEO ?
  • From: Mark Lord
• Re: [PATCH 4/4] block: add large command support
  • From: Pete Wyckoff
• RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Peer Chen
• Re: [PATCH] Pb1200/DBAu1200: IDE resource size off by one
  • From: Sergei Shtylyov
• Re: [PATCH 4/4] block: add large command support
  • From: FUJITA Tomonori
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Alan Cox
• Re: [PATCH 4/4] block: add large command support
  • From: Boaz Harrosh
• Re: [PATCH 4/4] block: add large command support
  • From: Jens Axboe
• Re: What to do about the 2TB limit on HDIO_GETGEO ?
  • From: Andrew Morton
• Re: sda
  • From: Justin Mattock
• Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tvrtko A. Ursulin
• Re: sda
  • From: Tejun Heo
• Re: sda
  • From: Justin Mattock
• [PATCH] scc_pata.c: do setup itself instead of ide_setup_pci_device ()
  • From: Akira Iguchi
• Re: sda
  • From: Tejun Heo
• Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
  • From: Tejun Heo
• Re: sata_via
  • From: Tejun Heo
• Re: No IDE drivers loaded for Toshiba Satellite 320 CDS
  • From: Tejun Heo
• Re: [2.6 patch] libata-acpi.c: remove unneeded #if's
  • From: Tejun Heo
• Re: sata_mv & pmp support
  • From: Tejun Heo
• Re: sata_mv & pmp support
  • From: Tejun Heo
• Re: [patch 2/2] libata: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH 4/4] block: add large command support
  • From: FUJITA Tomonori
• Re: sata io freeze, 2.6.18 and also 2.6.24 [the real culprit]
  • From: devzero
• Re: sata io freeze, 2.6.18 and also 2.6.24 [the real culprit]
  • From: Luis Sousa
• Re: sata io freeze, 2.6.18 and also 2.6.24 [the real culprit]
  • From: devzero
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Volker Armin Hemmann
• sata_mv & pmp support
  • From: Mark Lord
• [2.6 patch] xtensa: don't offer ATA
  • From: Adrian Bunk
• [PATCH] Au1200: IDE driver build fix
  • From: Sergei Shtylyov
• [2.6 patch] libata-acpi.c: remove unneeded #if's
  • From: Adrian Bunk
• [2.6 patch] remove the broken ETRAX_IDE driver
  • From: Adrian Bunk
• [RFC: 2.6 patch] make ata_eh_qc_retry() static
  • From: Adrian Bunk
• [PATCH] Au1200: kill IDE driver function prototypes
  • From: Sergei Shtylyov
• Re: [2.6 patch] avr32 mustn't select HAVE_IDE
  • From: Sam Ravnborg