On Tuesday 29 April 2008, Anton Vorontsov wrote: > We don't need init_hwif_ali15x3() on the PowerPC systems either. > > Before: > > ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 > ALI15X3: 100% native mode on irq 19 > ide0: BM-DMA at 0x1120-0x1127 > ide1: BM-DMA at 0x1128-0x112f > hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive > hda: UDMA/66 mode selected > ide0: Disabled unable to get IRQ 14. > ide0: failed to initialize IDE interface > ide1: Disabled unable to get IRQ 15. > ide1: failed to initialize IDE interface > > After: > > ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 > ALI15X3: 100% native mode on irq 19 > ide0: BM-DMA at 0x1120-0x1127 > ide1: BM-DMA at 0x1128-0x112f > hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive > hda: UDMA/66 mode selected > ide0 at 0x1100-0x1107,0x110a on irq 19 > ide1 at 0x1110-0x1117,0x111a on irq 19 > hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache > > ide0 works well, though I can't test ide1, it isn't traced out on > the board. > > Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx> applied, thanks -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html