so - you told, you have your disk attached to this controller: 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) Subsystem: Micro-Star International Co., Ltd. Unknown device 0430 Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at ec00 [size=8] I/O ports at e800 [size=4] I/O ports at e400 [size=8] I/O ports at e000 [size=4] I/O ports at dc00 [size=16] I/O ports at d800 [size=256] Capabilities: <access denied> and use sata_via module - and your system works stable with nosmp, but freezes very soon on heavy i/o with smp. disabling dma makes no difference. correct ? then i assume this could be an smp issue, probably a bug in sata_via and may need further investigation. there seem no noticeable changes in that driver since 2.6.24 - but maybe it`s worth trying 2.6.25-rc9 to see if it behaves different? absolutely nothing in dmesg on freeze ? maybe you could try catching some message with attaching serial console? how reliably can you crash that box with lots of i/o ? just random crashes or after a certain amount of data written/read ? could you try if just reading from the raw blockdevice makes a differnce ? (dd if=/dev/sda of=/dev/zero) > -----Ursprüngliche Nachricht----- > Von: "Luis Sousa" <ls.luis_sousa@xxxxxxxxxxxx> > Gesendet: 14.04.08 12:14:26 > An: devzero@xxxxxx > CC: linux-kernel@xxxxxxxxxxxxxxx > Betreff: Re: sata io freeze, 2.6.18 and also 2.6.24 [the real culprit] > > Hello, > > I did as planned, and I dare to say now, with > relative certainty, that the reason I have had all > these instabilities, including application crashes, > sneaky corrupt backups, and the dreaded freezes > every other day was SMP and HyperThreading not working > properly. Booting with nosmp gives me a stable system. > Booting only with the sata-related arguments had > the system freeze overnight. > > Sincerely, > -- > Luis Sousa > > --- devzero@xxxxxx escreveu: > > > hi luis, > > > > glad that it worked - but let us better call this a possible workaround, not a solution. > > > > mind that you loose lots of performance with this, because all i/o is handled by the cpu > > now. > > > > > If everything goes well, I'll reduce the command line > > > in order to narrow the problem further down. > > > > yes, please! > > > > regards > > roland > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: "Luis Sousa" <ls.luis_sousa@xxxxxxxxxxxx> > > > Gesendet: 12.04.08 17:34:39 > > > An: devzero@xxxxxx > > > CC: linux-kernel@xxxxxxxxxxxxxxx > > > Betreff: Re: sata io freeze, 2.6.18 and also 2.6.24 [POSSIBLE SOLUTION] > > > > > > > > > > Hello all, > > > > > > Thanks to valuable help from roland, I was able to > > > boot with the following options: > > > > > > ``nosmp ide=nodma libata.dma=0'' > > > > > > after what I ran an agressive stability test for a > > > while, with no problem whatsoever. Maybe it's too > > > soon to say, but I have a good feeling this time. It > > > seems roland figured it out. > > > > > > If everything goes well, I'll reduce the command line > > > in order to narrow the problem further down. > > > > > > (and indeed, this is a hyper-threading single core CPU) > > > > > > Sincerely, > > > -- > > > Luis Sousa > > > > > > --- devzero@xxxxxx escreveu: > > > > > > > did you try UP-kernel or tried booting with "nosmp" and does that make any difference > > ? > > > > > > > > >This is a 2-processor CPU: > > > > ># cat /proc/cpuinfo > > > > >processor : 0 > > > > >vendor_id : GenuineIntel > > > > >cpu family : 15 > > > > >model : 4 > > > > >model name : Intel(R) Pentium(R) 4 CPU 3.00GHz > > > > > > > > most likely this just "appears" as 2-way processor , but iŽm quite sure this is just > > a > > > > single-core CPU, but with HyperThreading enabled. > > > > > > > > > > > > regards > > > > roland > > > > > > > > > > > > > > > > List: linux-kernel > > > > Subject: sata io freeze, 2.6.18 and also 2.6.24 > > > > From: Luis Sousa <ls.luis_sousa () yahoo ! com ! br> > > > > Date: 2008-03-28 22:24:48 > > > > Message-ID: 739784.81690.qm () web46009 ! mail ! sp1 ! yahoo ! com > > > > [Download message RAW] > > > > > > > > Hello, > > > > > > > > I've been having consistent hard system freezes for a > > > > long time, every 2 days or so, and finally decided to > > > > move to the most recent stable kernel. Unfortunatelly > > > > that didn't fix it. The freezes seem to be io-related; > > > > they started since I moved my drive to sata. They seem > > > > to happen mostly when there's an io-intensive operation, > > > > like extracting a big archive; a reboot is needed. > > > > > > > > Nothing ever shows up in the logs. > > > > > > > > I'm using the following drive: > > > > > > > > ATA device, with non-removable media > > > > Model Number: MAXTOR STM3160215AS > > > > Serial Number: 6RA2TMJ4 > > > > Firmware Revision: 3.AAD > > > > > > > > Linux localhost 2.6.24.4 #4 SMP Fri Mar 28 14:51:50 BRT 2008 i686 GNU/Linux > > > > > > > > This is a 2-processor CPU: > > > > > > > > # cat /proc/cpuinfo > > > > processor : 0 > > > > vendor_id : GenuineIntel > > > > cpu family : 15 > > > > model : 4 > > > > model name : Intel(R) Pentium(R) 4 CPU 3.00GHz > > > > stepping : 9 > > > > cpu MHz : 3013.697 > > > > cache size : 1024 KB > > > > > > > > (same goes for processor : 1) > > > > > > > > Sincerely, > > > > -- > > > > Luis Sousa > > > > Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento! > http://br.mail.yahoo.com/ > > _________________________________________________________________________ In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
