From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: Re: kernel 2.6.25 with ide driver cs5520 does not boot.
Date: Thu, 15 May 2008 00:28:04 +0200
Hi. sorry, I'm too late.
I tested the patch to re-enable DMA. But, this patch has no effect. It cannot boot.
printk() message disappeared.
> On Wednesday 14 May 2008, Bartlomiej Zolnierkiewicz wrote:
> > On Friday 09 May 2008, TAKADA Yoshihito wrote:
> > > Hi.
> > >
> > > From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> > > Subject: Re: kernel 2.6.25 with ide driver cs5520 does not boot.
> > > Date: Fri, 9 May 2008 11:27:53 +0200
> > >
> > > > On Friday 09 May 2008, TAKADA Yoshihito wrote:
> > > > > Thanks for quick reply.
> > > > >
> > > > > I tried 2.6.26rc1. It hangs same as 2.6.25.
> > > > > kernel 2.6.26rc1 with cs5520 cannot boot. cs5520 scans ide0 and ide1.
> > > > > It seems 2nd port DMA base issue was solved.
> > > >
> > > > [...]
> > > >
> > > > Thanks.
> > > >
> > > > The following patch for 2.6.26-rc1 disables VDMA, please give it a try
> > > > (I haven't time to fully audit VDMA support yet but lets see if it is
> > > > the main source of the problems).
> > >
> > > I applied the patch. But kernel was hung.
> > > And I attempt to kill IDE_HFLAG_CS5520. It cannot boot, oo.
> > >
> > > kill IDE_HFLAG_VDMA : hang
> > > kill IDE_HFLAG_CS5520: hang
> > > kill both flags : boot
> >
> > Thanks for investigating this - I forgot that currently VDMA and CS5520
> > host flags use the same bit (so it also needs to be fixed).
> >
> > I'm going to send the following patch to Linus (please verify it):
> >
> > From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> > Subject: [PATCH] cs5520: disable VDMA
>
> [...]
>
> Please also try 2.6.26-rc2 without the above patch but with the following
> patch applied instead - according to comments in OpenFirmware & pata_cs5520
> code 0x60 register contains bus-master enable bit, it could be that it was
> left disabled by BIOS and we need to explicitely enable it (if somebody has
> CX5510 or CX5520 datasheet please verify this + send me a copy if possible).
>
> ---
> drivers/ide/pci/cs5520.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> Index: b/drivers/ide/pci/cs5520.c
> ===================================================================
> --- a/drivers/ide/pci/cs5520.c
> +++ b/drivers/ide/pci/cs5520.c
> @@ -147,6 +147,7 @@ static int __devinit cs5520_init_one(str
> {
> const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
> u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
> + u8 pcicfg;
>
> ide_setup_pci_noise(dev, d);
>
> @@ -163,6 +164,13 @@ static int __devinit cs5520_init_one(str
> return -ENODEV;
> }
>
> + pci_read_config_byte(dev, 0x60, &pcicfg);
> +
> + if ((pcicfg & 0x40) == 0) {
> + printk(KERN_WARNING "cs5520: DMA mode disabled. Enabling.\n");
> + pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
> + }
> +
> /*
> * Now the chipset is configured we can let the core
> * do all the device setup for us
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
