At Wed, 7 May 2008 16:56:16 +0200, Markus Trippelsdorf wrote: > > > > > Tejun Heo (12): > > libata: improve post-reset device ready test > > This commit (78ab88f04f44bed566d51dce0c7cbfeff6449a06) causes a long > boot delay with my onboard Promise controller. It seems like libata > probes for a nonexisting PATA drive... > > ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 > scsi0 : sata_promise > scsi1 : sata_promise > scsi2 : sata_promise > ata1: SATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600200 irq 18 > ata2: SATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600280 irq 18 > ata3: PATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600300 irq 18 > ata1: SATA link down (SStatus 0 SControl 300) > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7 > ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32) > ata2.00: configured for UDMA/133 > ata3: link is slow to respond, please be patient (ready=0) > ata3: device not ready (errno=-16), forcing hardreset > ata3: link is slow to respond, please be patient (ready=0) > ata3: SRST failed (errno=-16) > ata3: link is slow to respond, please be patient (ready=0) > ata3: SRST failed (errno=-16) > ata3: link is slow to respond, please be patient (ready=0) > ata3: SRST failed (errno=-16) > - Last output repeated twice - > ata3: reset failed, giving up The same problem appears on my machine, too: libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe500 bmdma 0xe800 irq 19 ata2: SATA max UDMA/133 cmd 0xe600 ctl 0xe700 bmdma 0xe808 irq 19 ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: link is slow to respond, please be patient (ready=0) ata2: device not ready (errno=-16), forcing hardreset ata2: link is slow to respond, please be patient (ready=0) ata2: SRST failed (errno=-16) ata2: link is slow to respond, please be patient (ready=0) ata2: SRST failed (errno=-16) ata2: link is slow to respond, please be patient (ready=0) ata2: SRST failed (errno=-16) ata2: SRST failed (errno=-16) ata2: reset failed, giving up Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html