Am Mittwoch 07 Mai 2008 18:35:48 schrieben Sie: > At Wed, 7 May 2008 16:56:16 +0200, > Markus Trippelsdorf wrote: > > > > > > > > Tejun Heo (12): > > > libata: improve post-reset device ready test > > > > This commit (78ab88f04f44bed566d51dce0c7cbfeff6449a06) causes a long > > boot delay with my onboard Promise controller. It seems like libata > > probes for a nonexisting PATA drive... > > Same here : <6>ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 4347 <6>ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 4347 <6>ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 4347 <6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <4>ata1.00: _GTF unexpected object type 0x1 <6>ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 <6>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) <4>ata1.00: _GTF unexpected object type 0x1 <6>ata1.00: configured for UDMA/133 <6>ata2: SATA link down (SStatus 0 SControl 300) <6>ata3: SATA link down (SStatus 0 SControl 300) <5>scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 <7>PM: Adding info for No Bus:target0:0:0 <7>PM: Adding info for scsi:0:0:0:0 <7>PM: Adding info for No Bus:0:0:0:0 <7>ata_piix 0000:00:1f.1: version 2.12 <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 <7>PCI: Setting latency timer of device 0000:00:1f.1 to 64 <6>scsi3 : ata_piix <7>PM: Adding info for No Bus:host3 <7>PM: Adding info for No Bus:host3 <6>scsi4 : ata_piix <7>PM: Adding info for No Bus:host4 <7>PM: Adding info for No Bus:host4 <6>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 <6>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 <6>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33 <6>ata4.00: configured for UDMA/33 <4>ata5: link is slow to respond, please be patient (ready=0) <4>ata5: device not ready (errno=-16), forcing hardreset <4>ata5: link is slow to respond, please be patient (ready=0) <3>ata5: SRST failed (errno=-16) <4>ata5: link is slow to respond, please be patient (ready=0) <3>ata5: SRST failed (errno=-16) <4>ata5: link is slow to respond, please be patient (ready=0) <3>ata5: SRST failed (errno=-16) <3>ata5: SRST failed (errno=-16) <3>ata5: reset failed, giving up <4>isa bounce pool size: 16 pages <5>scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WW01 PQ: 0 ANSI: 5 <7>PM: Adding info for No Bus:target3:0:0 <7>PM: Adding info for scsi:3:0:0:0 <7>PM: Adding info for No Bus:3:0:0:0 <6>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled <6>SGI XFS Quota Management subsystem <6>BIOS EDD facility v0.16 2004-Jun-25, 0 devices found <6>EDD information not available. <4>sys_init_module: 'edd'->init suspiciously returned 1, it should follow 0/-E convention <4>sys_init_module: loading module anyway... <4>Pid: 554, comm: modprobe Not tainted 2.6.26-rc1-linus.git-00166-gc0a1811 #1 <4> <4>Call Trace: <4> [sys_init_module+304/428] sys_init_module+0x130/0x1ac <4> [system_call_after_swapgs+138/143] system_call_after_swapgs+0x8a/0x8f <4> <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
