> > Tejun Heo (12): > libata: improve post-reset device ready test This commit (78ab88f04f44bed566d51dce0c7cbfeff6449a06) causes a long boot delay with my onboard Promise controller. It seems like libata probes for a nonexisting PATA drive... ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 scsi0 : sata_promise scsi1 : sata_promise scsi2 : sata_promise ata1: SATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600200 irq 18 ata2: SATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600280 irq 18 ata3: PATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600300 irq 18 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7 ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 ata3: link is slow to respond, please be patient (ready=0) ata3: device not ready (errno=-16), forcing hardreset ata3: link is slow to respond, please be patient (ready=0) ata3: SRST failed (errno=-16) ata3: link is slow to respond, please be patient (ready=0) ata3: SRST failed (errno=-16) ata3: link is slow to respond, please be patient (ready=0) ata3: SRST failed (errno=-16) - Last output repeated twice - ata3: reset failed, giving up -- Markus -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
