This timeout was set low because previously PMP register access was done via polling and register access timeouts could stack up. This is no longer the case. One timeout will make all following accesses fail immediately. In rare cases both marvell and SIMG PMPs need almost a second. Bump it to 3s. While at it, rename it to SATA_PMP_RW_TIMEOUT. It's not specific to SCR access. Signed-off-by: Tejun Heo <htejun@xxxxxxxxx> --- drivers/ata/libata-pmp.c | 4 ++-- include/linux/libata.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index f3ad024..04a486a 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -48,7 +48,7 @@ static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val) tf.device = link->pmp; err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, - SATA_PMP_SCR_TIMEOUT); + SATA_PMP_RW_TIMEOUT); if (err_mask) return err_mask; @@ -88,7 +88,7 @@ static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val) tf.lbah = (val >> 24) & 0xff; return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, - SATA_PMP_SCR_TIMEOUT); + SATA_PMP_RW_TIMEOUT); } /** diff --git a/include/linux/libata.h b/include/linux/libata.h index 0f17643..95e4169 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -341,7 +341,7 @@ enum { ATA_EH_PMP_TRIES = 5, ATA_EH_PMP_LINK_TRIES = 3, - SATA_PMP_SCR_TIMEOUT = 250, + SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */ /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ -- 1.5.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html