Linux IDE Archive

• Thread Index

• [PATCH 4/4] ide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ide-pmac: add ->init_dev method (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ide-pmac: store pmif instead of hwif in ->driver_data (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] ide-pmac: media-bay support fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] palm_bk3710: fix resource management
  • From: Sergei Shtylyov
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Tejun Heo
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Komuro
• Re: [git pull] Please pull powerpc.git merge branch
  • From: Adrian Bunk
• [patch 2/2] BAST: Remove old IDE driver
  • From: Ben Dooks
• [patch 0/2] pata-platform configuration changes / Remove bast-ide
  • From: Ben Dooks
• [patch 1/2] LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  • From: Ben Dooks
• Re: [PATCH] libata: use ATAPI dma even for data transfers not aligned to 16 bytes
  • From: Alan Cox
• Re: [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata: use ATAPI dma even for data transfers not aligned to 16 bytes
  • From: Tejun Heo
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: sis can't do PMP
  • From: Tejun Heo
• Re: [git patches] IDE fixes
  • From: Linus Torvalds
• Re: [git patches] IDE fixes
  • From: Linus Torvalds
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] IDE: 2.6.26-rc5-git5 ide_generic leaks resources breaking my NE2000 NIC
  • From: Mikael Pettersson
• [PATCH] ide: increase timeout in wait_drive_not_busy()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cs: fix releasing I/O resources
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide-floppy: replace pc->c with rq->cmd
  • From: Bartlomiej Zolnierkiewicz
• Re: [m68k] drivers/ide/ide-taskfile.c:235: error: implicit declaration of function 'sg_page'
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] IDE: 2.6.26-rc5-git5 ide_generic leaks resources breaking my NE2000 NIC
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Mark Lord
• [m68k] drivers/ide/ide-taskfile.c:235: error: implicit declaration of function 'sg_page'
  • From: Geert Uytterhoeven
• [BUG] IDE: 2.6.26-rc5-git5 ide_generic leaks resources breaking my NE2000 NIC
  • From: Mikael Pettersson
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Byron Bradley
• Re: [PATCH 00/18] misc generic ide stuff
  • From: Borislav Petkov
• Re: [PATCH 13/18] ide-floppy: replace pc->c with rq->cmd
  • From: Borislav Petkov
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Frans Pop
• Re: [PATCH 02/18] ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer
  • From: Borislav Petkov
• Re: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (fwd)
  • From: Piter PUNK
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Tejun Heo
• Re: [PATCH 18/18] ide: use flags in IRQ handler
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide-floppy: replace pc->c with rq->cmd
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/18] ide-cd: cdrom_decode_status: factor out block pc error handling code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/18] ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/18] misc generic ide stuff
  • From: Bartlomiej Zolnierkiewicz
• Re: Marvell 6141 on an ASUS M2N32-WS Motherboard
  • From: Brad Campbell
• Re: ahci.c
  • From: dunneil
• [Bug 10911] A long boot caused due to ata soft resets and drive recognition problems
  • From: bugme-daemon
• [Bug 10911] New: A long boot caused due to ata soft resets and drive recognition problems
  • From: bugme-daemon
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Komuro
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Jeff Garzik
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Komuro
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Nicolas Pitre
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Mark Lord
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Nicolas Pitre
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Frans Pop
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Mark Lord
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Frans Pop
• Re: ahci.c
  • From: dunneil
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Mark Lord
• Re: ahci.c
  • From: dunneil
• Re: ahci.c
  • From: dunneil
• Re: ahci.c
  • From: Jeff Garzik
• Re: ahci.c
  • From: dunneil
• [PATCH #upstream-fixes] ata_piix: add TECRA M4 to broken suspend list
  • From: Tejun Heo
• Re: ahci.c
  • From: Jeff Garzik
• Re: ahci.c
  • From: dunneil
• Re: ahci.c
  • From: dunneil
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [patch] libata:ahci: enclosure management support (resend)
  • From: Jeff Garzik
• Re: [PATCH 2/5] libata: consistently use msecs for time durations
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: workarounds for mcp65
  • From: Jeff Garzik
• Re: [PATCH] SB600 SATA controller PMP support
  • From: Jeff Garzik
• [PATCH 7/7] ide-pmac: move ide_find_port() call to pmac_ide_setup_device()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/7] ide-pmac: add ->init_dev method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/7] ide-pmac: store pmif instead of hwif in ->driver_data
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/7] ide-pmac: media-bay support fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/7] ide-pmac: remove bogus comment about pmac_ide_setup_device()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/7] ide-pmac: add ->cable_detect method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/7] ide-pmac: bugfix for media-bay support rework
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/5] powerpc: remove mpc8xx-ide driver
  • From: Arnd Bergmann
• Re: CDC_PLAY_AUDIO check in cdrom_count_tracks() and other oddities
  • From: Jens Axboe
• Re: sata_mv on Orion: mv_err_intr when shutting down
  • From: Martin Michlmayr
• Re: Prevent busy looping
  • From: James Bottomley
• Re: Prevent busy looping
  • From: Tejun Heo
• Re: [PATCH 1/5] powerpc: remove mpc8xx-ide driver
  • From: Kumar Gala
• Re: Prevent busy looping
  • From: Elias Oltmanns
• Re: + ide-avoid-dma-on-the-stack-for-req_type_ata_pc.patch addedto -mm tree
  • From: FUJITA Tomonori
• Re: +block-blk_rq_map_kern-uses-the-bounce-buffers-for-stack-buffers.patchadded to -mm tree
  • From: FUJITA Tomonori
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Tejun Heo
• [PATCH 12/18] ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path
  • From: Borislav Petkov
• [PATCH 09/18] ide-cd: fold cdrom_start_seek into ide_cd_do_request
  • From: Borislav Petkov
• Re: ahci.c
  • From: dunneil
• [PATCH 03/18] ide-cd: cdrom_decode_status: factor out block pc error handling code
  • From: Borislav Petkov
• [PATCH 13/18] ide-floppy: replace pc->c with rq->cmd
  • From: Borislav Petkov
• [PATCH 16/18] ide-floppy: pass rq instead of pc to idefloppy_issue_pc
  • From: Borislav Petkov
• [PATCH 08/18] ide-cd: simplify request issuing path
  • From: Borislav Petkov
• [PATCH 14/18] ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open
  • From: Borislav Petkov
• [PATCH 15/18] ide-floppy: zero out the whole struct ide_atapi_pc on init
  • From: Borislav Petkov
• [PATCH 10/18] ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path
  • From: Borislav Petkov
• [PATCH 18/18] ide: use flags in IRQ handler
  • From: Borislav Petkov
• [PATCH 17/18] ide-floppy: cleanup idefloppy_create_rw_cmd
  • From: Borislav Petkov
• [PATCH 07/18] ide-cd: mv ide_do_rw_cdrom ide_cd_do_request
  • From: Borislav Petkov
• [PATCH 05/18] ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block
  • From: Borislav Petkov
• [PATCH 11/18] ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
  • From: Borislav Petkov
• [PATCH 06/18] ide-cd: cdrom_start_seek: remove unused argument block
  • From: Borislav Petkov
• [PATCH 04/18] ide-cd: cdrom_decode_status: factor out fs request error handling code
  • From: Borislav Petkov
• [PATCH 02/18] ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer
  • From: Borislav Petkov
• [PATCH 01/18] ide-cd: remove wait-for-idle-controller bit in cdrom_start_packet_command
  • From: Borislav Petkov
• [PATCH 00/18] misc generic ide stuff
  • From: Borislav Petkov
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Tejun Heo
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Tejun Heo
• CDC_PLAY_AUDIO check in cdrom_count_tracks() and other oddities
  • From: Tejun Heo
• Re: ahci.c
  • From: dunneil
• Re: Prevent busy looping
  • From: Tejun Heo
• Re: ahci.c
  • From: Jeff Garzik
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Tejun Heo
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Tejun Heo
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: [PATCH 2/6] opti621: remove DMA support
  • From: Sergei Shtylyov
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] ahci: workarounds for mcp65
  • From: Hemmann, Volker Armin
• hdparm-8.8 is released
  • From: Mark Lord
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/6] opti621: add PIO 4 support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/6] opti621: use pre-calculated PIO timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/6] opti621: program devices timings separately in ->set_pio_mode
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/6] opti621: use PCI clock value provided by controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/6] opti621: disable read prefetch
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/6] opti621: remove DMA support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/5] sgiioc4: call ide_find_port_slot() later
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/5] icside: always try to probe first interface
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/5] rapide: fix rapide_probe() return value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] ide-cs: fix probing and add warm-plug support
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Andrew Henry
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB
  • From: Dominik Brodowski
• Re: Promise SATA300 TX4
  • From: Mikael Pettersson
• Re: Prevent busy looping
  • From: Tejun Heo
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Justin Mattock
• Re: Prevent busy looping
  • From: Alan Cox
• Re: Prevent busy looping
  • From: Tejun Heo
• Re: macbook pro dvd playback after suspend Buffer I/O error
  • From: Tejun Heo
• Re: [PATCH] swarm: use struct ide_port_info
  • From: Maciej W. Rozycki
• Promise SATA300 TX4
  • From: MisterE
• [PATCH 14/14] ide: remove needless includes from setup-pci.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/14] ide: remove superfluous BUG_ON() from set_geometry_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/14] ide: remove needless includes from ide-taskfile.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/14] ide: remove needless includes from ide.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/14] ide: allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/14] ide-pnp: print driver banner message early
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/14] ide-h8300: print driver banner message early
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/14] ide: print message on error in ide_find_port_slot()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/14] ide_platform: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/14] ide-h8300: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/14] rapide: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/14] cmd640: add ->init_dev method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/14] ide: ->port_init_devs -> ->init_dev
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/14] cmd640: fix warm-plug support for the secondary interface
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] fix BLK_DEV_HD_ONLY on ARM dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] export ide_doubler
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/5] powerpc: remove mpc8xx-ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] swarm: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pata_amd: (TEST) See if the ATAPI reports of problems are related to the FIFO
  • From: Alan Cox
• [PATCH 1/5] powerpc: remove mpc8xx-ide driver
  • From: arnd
• ata13.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  • From: Ben Martin
• [PATCH #upstream 2/2] libata-eh: clear UNIT ATTENTION after reset
  • From: Tejun Heo
• [PATCH #upstream 1/2] libata-eh: update atapi_eh_request_sense() to take @dev instead of @qc
  • From: Tejun Heo
• RE: [PATCH] Support SB700 SATA controller PMP
  • From: Huang, Shane
• RE: [PATCH] SB600 SATA controller PMP support
  • From: Shane Huang
• Re: [PATCH] ata: blacklist FUJITSU MHW2160BH PL
  • From: Tejun Heo
• Re: [PATCH] ata: blacklist FUJITSU MHW2160BH PL
  • From: maximilian attems
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Tejun Heo
• Re: [RFC] expand link_power_management_policy definition
  • From: Tejun Heo
• Re: [PATCH] ata: blacklist FUJITSU MHW2160BH PL
  • From: Tejun Heo
• Re: problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24)
  • From: Tejun Heo
• [2.6 patch] export ide_doubler
  • From: Adrian Bunk
• [2.6 patch] fix BLK_DEV_HD_ONLY on ARM dependencies
  • From: Adrian Bunk
• Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
  • From: Roman Zippel
• [PATCH #upstream-fixes] ahci: workarounds for mcp65
  • From: Tejun Heo
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Hemmann, Volker Armin
• Re: ata_piix on MacBook4,1: CD/DVD drive often fails to work
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: CD/DVD drive often fails to work
  • From: MATSUBAYASHI, 'Shaolin' Kohji
• ata_piix on MacBook4,1: CD/DVD drive often fails to work
  • From: MATSUBAYASHI, 'Shaolin' Kohji
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Tejun Heo
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Tejun Heo
• Re: [PATCH] Support SB700 SATA controller PMP
  • From: Tejun Heo
• Re: [PATCH] SB600 SATA controller PMP support
  • From: Tejun Heo
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• Re: regarding crazy head unloads
  • From: Tejun Heo
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: Port Multiplier drives not always all found on cold plug
  • From: Tejun Heo
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• Re: [PATCH] swarm: use struct ide_port_info
  • From: Maciej W. Rozycki
• [PATCH] palm_bk3710: add warm-plug support
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: Pavel Machek
• [Bug 10715] 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: bugme-daemon
• [Bug 10715] 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: bugme-daemon
• Re: [stable] [patch 10/50] libata: force hardreset if link is in powersave mode
  • From: Linus Torvalds
• Re: ide cdrom problems on new imac
  • From: Alan Cox
• Marvell 6141 on an ASUS M2N32-WS Motherboard
  • From: Brad Campbell
• Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
  • From: FUJITA Tomonori
• Re: [patch 10/50] libata: force hardreset if link is in powersave mode
  • From: Jeff Garzik
• Re: [stable] [patch 10/50] libata: force hardreset if link is in powersave mode
  • From: Greg KH
• Re: ide cdrom problems on new imac
  • From: Jason Keltz
• Re: [patch 10/50] libata: force hardreset if link is in powersave mode
  • From: Linus Torvalds
• [patch 10/50] libata: force hardreset if link is in powersave mode
  • From: Chris Wright
• Re: [PATCH 4/4] ide: tighten checks on PCI BARs in ide_hwif_configure()
  • From: Alan Cox
• [PATCH 4/4] ide: tighten checks on PCI BARs in ide_hwif_configure()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] icside: use ide_init_port_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] sgiioc4: use driver name for resource allocation
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] icside: don't use hwif->hwif_data
  • From: Bartlomiej Zolnierkiewicz
• Re: ide cdrom problems on new imac
  • From: Alan Cox
• Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: Bartlomiej Zolnierkiewicz
• ide cdrom problems on new imac
  • From: Jason Keltz
• Re: 2.6.26-rc5 DOA on mac g5
  • From: Andrew Morton
• 2.6.26-rc5 DOA on mac g5
  • From: Andrew Morton
• Re: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc
  • From: Pavel Machek
• Re: [Bugme-new] [Bug 10860] New: total system freeze at boot with 2.6.26-rc
  • From: Andrew Morton
• Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
  • From: Borislav Petkov
• Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
  • From: James Bottomley
• Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
  • From: Alan Cox
• Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
  • From: Nick Piggin
• Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
  • From: Nick Piggin
• Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
  • From: Jeff Garzik
• [PATCH] Support SB700 SATA controller PMP
  • From: Shane Huang
• Re: patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
  • From: Alan Cox
• patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression
  • From: Nick Piggin
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Andrew Henry
• Re: [Bugme-new] [Bug 10854] New: CDROM is nor detected with libata and 3Ware.
  • From: Andrew Morton
• Re: [RFC] expand link_power_management_policy definition
  • From: Kristen Carlson Accardi
• Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 1/5] libata: kill unused constants
  • From: Jeff Garzik
• Re: [PATCH 01/01] sata_mv: PHY_MODE4 cleanups
  • From: Jeff Garzik
• Re: [PATCH] ata acer short cable quirks
  • From: Jeff Garzik
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Jeff Garzik
• Re: [PATCH 7/9] au1xxx-ide: don't use hwif->hwif_data
  • From: Sergei Shtylyov
• Re: [PATCH 6/9] delkin_cb: add missing __init/__exit tags
  • From: Sergei Shtylyov
• Re: [PATCH 3/9] delkin_cb: set proper hwif->gendev.parent value
  • From: Sergei Shtylyov
• Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
  • From: Tejun Heo
• [PATCH] SB600 SATA controller PMP support
  • From: Shane Huang
• Re: [RFC] expand link_power_management_policy definition
  • From: Jeff Garzik
• [RFC] expand link_power_management_policy definition
  • From: Kristen Carlson Accardi
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Jeff Garzik
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: Mounting CF flash card in 2.6.25
  • From: vb
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Jeff Garzik
• Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
  • From: Jeff Garzik
• Re: [patch] libata:ahci: enclosure management support (resend)
  • From: Jeff Garzik
• Re: Mounting CF flash card in 2.6.25
  • From: vb
• [patch] libata:ahci: enclosure management support (resend)
  • From: Kristen Carlson Accardi
• Re: Mounting CF flash card in 2.6.25
  • From: Michael Tokarev
• [PATCH] ata acer short cable quirks
  • From: maximilian attems
• [PATCH] ata: blacklist FUJITSU MHW2160BH PL
  • From: maximilian attems
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: Mounting CF flash card in 2.6.25
  • From: vb
• Re: Mounting CF flash card in 2.6.25
  • From: Alan Cox
• Re: Mounting CF flash card in 2.6.25
  • From: vb
• RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Peer Chen
• Mounting CF flash card in 2.6.25
  • From: vb
• hdparm-8.7 is released
  • From: Mark Lord
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Brian King
• [PATCH 9/9] ide-cs: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] ide_4drives: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/9] au1xxx-ide: don't use hwif->hwif_data
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/9] delkin_cb: add missing __init/__exit tags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/9] delkin_cb: add warm-plug support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/9] delkin_cb: use struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] delkin_cb: set proper hwif->gendev.parent value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] ide: set hwif->dev in ide_init_port_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/9] ide: fix host drivers missing hwif->chipset initialization
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Alan Cox
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Matthew Garrett
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: James Bottomley
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: James Bottomley
• Re: [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
  • From: Borislav Petkov
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Brian King
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Ric Wheeler
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Ric Wheeler
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: James Bottomley
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Greg Freemyer
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: James Bottomley
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Brian King
• Re: [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  • From: Brian King
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Alan Cox
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Mark Lord
• Re: [PATCH 19/21] ide: move ide_pio_cycle_time() to ide-timings.c
  • From: Sergei Shtylyov
• Re: [PATCH 03/21] ide: use u8 for xfer modes in ide-timing.h
  • From: Sergei Shtylyov
• Re: [PATCH 02/21] ide: remove unused XFER_UDMA_SLOW
  • From: Sergei Shtylyov
• Re: [PATCH 20/21] ide: remove no longer used ide_pio_timings[]
  • From: Sergei Shtylyov
• Re: [PATCH 18/21] ide-pmac: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 16/21] sl82c105: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 15/21] opti621: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 14/21] cy82c693: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 13/21] cmd64x: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 12/21] cmd640: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 12/21] cmd640: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 11/21] alim15x3: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 10/21] qd65xx: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 09/21] ht6560b: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 08/21] ali14xx: convert to use ide_timing_find_mode()
  • From: Sergei Shtylyov
• Re: regarding crazy head unloads
  • From: Scott James Remnant
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Alan Cox
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• [PATCH v2 -mm 1/6] block: add blk_queue_update_dma_pad
  • From: FUJITA Tomonori
• [PATCH v2 -mm 6/6] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: FUJITA Tomonori
• [PATCH v2 -mm 2/6] ide: use the dma safe check for REQ_TYPE_ATA_PC
  • From: FUJITA Tomonori
• [PATCH v2 -mm 5/6] scsi: sr avoids useless buffer allocation
  • From: FUJITA Tomonori
• [PATCH v2 -mm 4/6] ide: avoid DMA on the stack for REQ_TYPE_ATA_PC
  • From: FUJITA Tomonori
• [PATCH v2 -mm 3/6] block: blk_rq_map_kern uses the bounce buffers for stack buffers
  • From: FUJITA Tomonori
• [PATCH v2 -mm 0/6] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: FUJITA Tomonori
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Alan Cox
• Re: Port Multiplier drives not always all found on cold plug
  • From: JR Wilbert
• Why my USB disk drive is mounted "WriteProtect is on"?
  • From: Peter Teoh
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Jeff Garzik
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Pavel Machek
• Re: Correct partition table geometry?(Story included)
  • From: Tuc at T-B-O-H.NET
• [PATCH 01/01] sata_mv: PHY_MODE4 cleanups
  • From: Mark Lord
• [PATCH] ide-generic: add missing hwif->chipset setup
  • From: Bartlomiej Zolnierkiewicz
• Re: Correct partition table geometry?(Story included)
  • From: Mark Lord
• Correct partition table geometry?(Story included)
  • From: Tuc at T-B-O-H.NET
• Wasn't thinking (Was: Correct partition table geometry?)
  • From: Tuc at T-B-O-H.NET
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Tejun Heo
• Re: [PATCH 02/03] sata_mv: PHY_MODEx errata fixes
  • From: Mark Lord
• Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c
  • From: Jeff Garzik
• Re: [PATCH] Add port multiplier (PMP) support in sata_fsl driver
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726
  • From: Jeff Garzik
• Re: [PATCH] libata: fix libata-scsi kernel-doc notation
  • From: Jeff Garzik
• Re: [PATCH v2.6.26-rc4] ata: Convert deprecated static spinlock_t lock instance to static DEFINE_SPINLOCK(lock)
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ata_piix: fix macbook ich8m problems
  • From: Jeff Garzik
• Re: [PATCH 02/03] sata_mv: PHY_MODEx errata fixes
  • From: Jeff Garzik
• Re: [PATCH 01/03] sata_mv: move SOC_FLAG to hpriv
  • From: Jeff Garzik
• [PATCH 3/9] pcmcia: add another pata/ide ID
  • From: Dominik Brodowski
• [PATCH 1/9] pcmcia: add an pata/ide ID
  • From: Dominik Brodowski
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Andrew Henry
• problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24)
  • From: Mark Paulus
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Mark Lord
• Re: [PATCH 06/21] ide: checkpatch.pl fixes for ide-timing.h
  • From: Sergei Shtylyov
• Re: [PATCH 05/21] ide: remove XFER_* masks from ide-timing.h
  • From: Sergei Shtylyov
• Re: [PATCH 04/21] ide: move some bits from ide-timing.h to <linux/ide.h>
  • From: Sergei Shtylyov
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: tom
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Hemmann, Volker Armin
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Andrew Henry
• Re: 2.6.25: sata_sil freezes, hard resets port.
  • From: Tejun Heo
• Re: kernel 2.6.25 with ide driver cs5520 does not boot.
  • From: TAKADA Yoshihito
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Andrew Morton
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Tejun Heo
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Harvey Harrison
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Harvey Harrison
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Paul Mackerras
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Andrew Morton
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Harvey Harrison
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Andrew Morton
• Re: [PATCH 05/37] ata: use get/put_endian helpers
  • From: Mark Lord
• Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• Re: [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• [RFC PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Linus Torvalds
• [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
  • From: bugme-daemon
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• [PATCH 05/37] ata: use get/put_endian helpers
  • From: Harvey Harrison
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Linus Torvalds
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
  • From: bugme-daemon
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Linus Torvalds
• [PATCH v2.6.26-rc4] ata: Convert deprecated static spinlock_t lock instance to static DEFINE_SPINLOCK(lock)
  • From: Pradeep Singh Rautela
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Henrique de Moraes Holschuh
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Jeff Garzik
• Re: RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Linus Torvalds
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  • From: Hemmann, Volker Armin
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Matthew Garrett
• [PATCH #upstream-fixes] ata_piix: fix macbook ich8m problems
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: MATSUBAYASHI 'Shaolin' Kohji
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: MATSUBAYASHI 'Shaolin' Kohji
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: Tejun Heo
• Re: [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?
  • From: Li Zefan
• Re: [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?
  • From: Johannes Weiner
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: MATSUBAYASHI 'Shaolin' Kohji
• [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?
  • From: Li Zefan
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Andrew Morton
• Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: MATSUBAYASHI 'Shaolin' Kohji
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: Tejun Heo
• Re: Linux 2.6.26-rc4
  • From: Bill Davidsen
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: MATSUBAYASHI 'Shaolin' Kohji
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• [PATCH 19/21] ide: move ide_pio_cycle_time() to ide-timings.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/21] ide: remove no longer used ide_pio_timings[]
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/21] ide: move PIO blacklist to ide-pio-blacklist.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/21] ide-pmac: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/21] ide-mpc8xx: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/21] sl82c105: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/21] opti621: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/21] cy82c693: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/21] cmd64x: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/21] cmd640: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/21] alim15x3: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/21] qd65xx: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/21] ht6560b: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/21] ali14xx: convert to use ide_timing_find_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/21] ide: convert ide-timing.h to ide-timings.c library
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/21] ide: checkpatch.pl fixes for ide-timing.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/21] ide: remove XFER_* masks from ide-timing.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/21] ide: move some bits from ide-timing.h to <linux/ide.h>
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/21] ide: use u8 for xfer modes in ide-timing.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/21] ide: remove unused XFER_UDMA_SLOW
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/21] ide: remove needless includes from ide-lib.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/21] ide: convert ide-timing.h to ide-timings.c library
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/05] sata_mv: implement SoC guideline SATA_S11
  • From: Mark Lord
• [PATCH 04/04] sata_mv: workaround for 60x1 errata sata13
  • From: Mark Lord
• Re: [PATCH] libata: Handle bay devices in dock stations
  • From: Tejun Heo
• [PATCH] libata: Handle bay devices in dock stations
  • From: Holger Macht
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: Tejun Heo
• Re: ata_piix on MacBook4,1: fail to startup in a certain situation
  • From: MATSUBAYASHI 'Shaolin' Kohji
• Re: [PATCH 3/4] ide: use the dma safe check for REQ_TYPE_ATA_PC
  • From: Borislav Petkov
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Theodore Tso
• [PATCH 03/03] sata_mv: nuke unreleased GenIIe revisions
  • From: Mark Lord
• [PATCH 02/03] sata_mv: PHY_MODEx errata fixes
  • From: Mark Lord
• [PATCH 01/03] sata_mv: move SOC_FLAG to hpriv
  • From: Mark Lord
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Kristen Carlson Accardi
• [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
  • From: bugme-daemon
• [Bug 10803] Kernel freeze on accesing CD-ROM or HDD
  • From: bugme-daemon
• Re: [PATCH] ata: ahci: power off unused ports
  • From: Theodore Tso
• [Bug 10803] New: Kernel freeze on accesing CD-ROM or HDD
  • From: bugme-daemon
• Re: Linux 2.6.26-rc4
  • From: J.A. Magallón
• Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
  • From: Borislav Petkov
• Re: Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
  • From: Grant Grundler
• [PATCH] sis5513: add missing pci_enable_device() call
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
  • From: Alan Cox
• Re: [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 04/22] ide: add ide_deprecated_find_port() helper
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: FUJITA Tomonori
• [Bug 10749] IDE sis5513: the system doesn't shutdown
  • From: bugme-daemon
• [Bug 10749] IDE sis5513: the system doesn't shutdown
  • From: bugme-daemon
• Re: Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
  • From: Andre Tomt
• Re: Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
  • From: Mark Lord
• Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions
  • From: Justin Piszcz
• Re: [KERNEL] Re: Bug in libata
  • From: Klaus Ethgen
• Re: [PATCH 00/40] ide: generic ATAPI support
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry
  • From: Bartlomiej Zolnierkiewicz
• Re: Bug in libata
  • From: Jeff Garzik
• [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT
  • From: bugme-daemon
• Re: regarding crazy head unloads
  • From: Tejun Heo
• RE: [PATCH] Add port multiplier (PMP) support in sata_fsl driver
  • From: Kalra Ashish
• regarding crazy head unloads
  • From: Tejun Heo
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: James Bottomley
• Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Mikael Pettersson
• Re: [PATCH 00/40] ide: generic ATAPI support
  • From: Borislav Petkov
• Re: [PATCH] Add port multiplier (PMP) support in sata_fsl driver
  • From: Tejun Heo
• Re: Drives not detected: sil3124 PMP to sil4726 5 drive enclosure
  • From: Tejun Heo
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: David Miller
• Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: David Miller
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: FUJITA Tomonori
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Andrew Morton
• Re: [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: Thomas Bogendoerfer
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Drives not detected: sil3124 PMP to sil4726 5 drive enclosure
  • From: Ryan Burchfield
• Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
  • From: Arjan van de Ven
• Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
  • From: Robert Hancock
• Re: [PATCH 04/22] ide: add ide_deprecated_find_port() helper
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Mikael Pettersson
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: Fwd: confusion about libata.force=80c
  • From: Tejun Heo
• Re: [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1()
  • From: Borislav Petkov
• [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726
  • From: Tejun Heo
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
  • From: Arjan van de Ven
• Re: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Tejun Heo
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
  • From: Robert Hancock
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv
  • From: Arjan van de Ven
• Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Jeff Garzik
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl
  • From: Alan Cox
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Matthew Garrett
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Holger Macht
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Matthew Garrett
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Holger Macht
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1()
  • From: Sergei Shtylyov
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Matthew Garrett
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Paul Mundt
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Andrew Morton
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Herbert Xu
• Re: [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: Andrew Morton
• Fwd: confusion about libata.force=80c
  • From: Tom Sylla
• Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Mikael Pettersson
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Holger Macht
• Re: [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: Elias Oltmanns
• Re: [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: Jim Paris
• Re: [PATCH] Fixups to ATA ACPI hotplug
  • From: Holger Macht
• Re: [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: Elias Oltmanns
• [PATCH] Add port multiplier (PMP) support in sata_fsl driver
  • From: Kumar Gala
• [PATCH 1/4] block: use ARCH_KMALLOC_MINALIGN as the default dma pad mask
  • From: FUJITA Tomonori
• [PATCH 2/4] block: add blk_queue_update_dma_pad
  • From: FUJITA Tomonori
• [PATCH 4/4] cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: FUJITA Tomonori
• [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack)
  • From: FUJITA Tomonori
• [PATCH 3/4] ide: use the dma safe check for REQ_TYPE_ATA_PC
  • From: FUJITA Tomonori
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Tejun Heo
• Re: [PATCH 5/5] libata: improve EH internal command timeout handling
  • From: Tejun Heo
• Re: [PATCH 2/5] libata: consistently use msecs for time durations
  • From: Tejun Heo
• Re: [PATCH 3/5] libata: improve EH retry delay handling
  • From: Tejun Heo
• Re: [PATCHSET #upstream-fixes] git tree available
  • From: Mark Lord
• Re: Re: [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controllerin ahci.c
  • From: peerchen
• RE: [PATCHSET #upstream-fixes] git tree available
  • From: Brian & Chamaigne Scamman
• Re: [Bugme-new] [Bug 10752] New: pata_isapnp driver causes the ata layer to go splat
  • From: Arjan van de Ven
• [PATCH -resend] libata: fix kernel-doc params notation
  • From: Randy.Dunlap
• [git patches] libata updates
  • From: Jeff Garzik
• Re: PROBLEM: Error messages on resume from memory/disk.
  • From: Andrei Gusev
• Re: [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry
  • From: Adrian Bunk
• Re: [PATCH 2/5] libata: consistently use msecs for time durations
  • From: Elias Oltmanns
• Re: [Bugme-new] [Bug 10752] New: pata_isapnp driver causes the ata layer to go splat
  • From: Andrew Morton
• RE: Oops with PREEMPT-RT on 2.6.25.4
  • From: Rune Torgersen
• [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry
  • From: Adrian Bunk
• RE: Oops with PREEMPT-RT on 2.6.25.4
  • From: Rune Torgersen
• Re: [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
  • From: Alan Cox
• Re: How to mount a CD created on Vista?
  • From: James Courtier-Dutton
• [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY
  • From: Adrian Bunk
• Re: [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling
  • From: Jeff Garzik
• Re: [PATCH 05/10] libata: ignore recovered PHY errors
  • From: Jeff Garzik
• Re: Oops with PREEMPT-RT on 2.6.25.4
  • From: Scott Wood
• RE: Oops with PREEMPT-RT on 2.6.25.4
  • From: Rune Torgersen
• Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Jeff Garzik
• Re: [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets
  • From: Jeff Garzik
• Re: [patch 1/1] ata: remove FIT() macro
  • From: Jeff Garzik
• Re: [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.
  • From: Jeff Garzik
• Re: [PATCH 10/10] sata_mv: ensure empty request queue for FBS-NCQ EH
  • From: Jeff Garzik
• Re: [PATCH 10/10] sata_mv: ensure empty request queue for FBS-NCQ EH
  • From: Jeff Garzik
• Re: Oops with PREEMPT-RT on 2.6.25.4
  • From: Scott Wood
• RE: Oops with PREEMPT-RT on 2.6.25.4
  • From: Rune Torgersen
• Re: Oops with PREEMPT-RT on 2.6.25.4
  • From: Scott Wood
• Re: SATA 2.4 ICH8
  • From: Willy Tarreau
• Re: Oops with PREEMPT-RT on 2.6.25.4
  • From: Gregory Haskins
• RE: Oops with PREEMPT-RT on 2.6.25.4
  • From: Rune Torgersen
• Re: Oops with PREEMPT-RT on 2.6.25.4
  • From: Scott Wood
• Oops with PREEMPT-RT on 2.6.25.4
  • From: Rune Torgersen
• Re: [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c
  • From: Jeff Garzik
• Re: [PATCH 5/5] libata: improve EH internal command timeout handling
  • From: Jeff Garzik
• Re: [PATCH 5/5] libata: improve EH internal command timeout handling
  • From: Alan Cox
• Re: [PATCH 3/5] libata: improve EH retry delay handling
  • From: Alan Cox
• Re: [PATCH 09/09] sata_mv cache main_irq_mask register in hpriv
  • From: Grant Grundler
• [PATCH 5/5] libata: improve EH internal command timeout handling
  • From: Tejun Heo
• [PATCH 4/5] libata: use ULONG_MAX to terminate reset timeout table
  • From: Tejun Heo
• [PATCH 2/5] libata: consistently use msecs for time durations
  • From: Tejun Heo
• [PATCH 3/5] libata: improve EH retry delay handling
  • From: Tejun Heo
• [PATCHSET #upstream] libata: improve timeout handling for EH commands
  • From: Tejun Heo
• [PATCH 1/5] libata: kill unused constants
  • From: Tejun Heo
• [PATCH] Fixups to ATA ACPI hotplug
  • From: Matthew Garrett
• [PATCH 10/10] sata_mv: ensure empty request queue for FBS-NCQ EH
  • From: Mark Lord
• SATA disk dies and revives after boot
  • From: Jan Evert van Grootheest
• [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c
  • From: peerchen
• Re: SATA 2.4 ICH8
  • From: Steve Rosenbluth
• Re: [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr()
  • From: Borislav Petkov
• Re: PROBLEM: Error messages on resume from memory/disk.
  • From: Zhao Yakui
• Re: [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached
  • From: Mark Lord
• [patch 08/18] m68k: macide doesnt check for Mac
  • From: Geert Uytterhoeven
• [PATCH 40/40] ide: add ide_pc_intr() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 39/40] ide-{floppy,scsi}: read Status Register before stopping DMA engine
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 38/40] ide-scsi: add more debugging to idescsi_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 37/40] ide-scsi: use pc->callback
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 36/40] ide-floppy: add more debugging to idefloppy_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 35/40] ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 34/40] ide-tape: add ide_tape_io_buffers() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 33/40] ide-tape: factor out DSC handling from idetape_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 32/40] ide-{floppy,tape}: move checking of ->failed_pc to ->callback
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 31/40] ide: add ide_issue_pc() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 30/40] ide: add PC_FLAG_DRQ_INTERRUPT pc flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 29/40] ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 28/40] ide: add ide_transfer_pc() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 27/40] ide-scsi: set drive->scsi flag for devices handled by the driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 26/40] ide-{cd,floppy,tape}: remove checking for drive->scsi
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 25/40] ide: add PC_FLAG_ZIP_DRIVE pc flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 24/40] ide-tape: factor out waiting for good ireason from idetape_transfer_pc()
  • From: Bartlomiej Zolnierkiewicz